! Started logfile: /vlbi/uf001/uva//J0047+0319_S_dfm.log on Sun Jan 13 20:43:03 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0047+0319_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0047+0319_S_uva.fits
! AN table 1: 57 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.736842 visibilities/baseline/integration-bin.
! Found source: J0047+0319
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3528 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0047+0319_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003006Jy  sigma=24.837825
! Fit after  self-cal, rms=0.955411Jy  sigma=23.669945
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.222 mas, bmaj=20.83 mas, bpa=-15.25 degrees
! Estimated noise=0.643844 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0356652 Jy
! Component: 100  -  total flux cleaned = 0.043604 Jy
! Total flux subtracted in 100 components = 0.043604 Jy
! Clean residual min=-0.003784 max=0.003532 Jy/beam
! Clean residual mean=0.000005 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.043604 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.043604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053947Jy  sigma=1.277012
! Fit after  self-cal, rms=0.052761Jy  sigma=1.246358
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.798 mas, bmaj=21.67 mas, bpa=-15.17 degrees
! Estimated noise=0.523455 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349911 Jy
! Component: 100  -  total flux cleaned = 0.00324409 Jy
! Component: 150  -  total flux cleaned = 0.00305997 Jy
! Component: 200  -  total flux cleaned = 0.00295545 Jy
! Total flux subtracted in 200 components = 0.00295545 Jy
! Clean residual min=-0.002732 max=0.002631 Jy/beam
! Clean residual mean=0.000006 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.0465594 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.0465595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052505Jy  sigma=1.239949
! Fit after  self-cal, rms=0.052509Jy  sigma=1.239806
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.798 x 21.67 at -15.17 degrees (North through East)
! Clean map  min=-0.0027388  max=0.047103 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        1.06     KP        0.99     
!   LA        0.91     NL        1.00     OV        1.01     PT        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     HN        0.99     KP        1.07     
!   LA        0.91     NL        1.03     OV        0.94     PT        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        0.93     KP        1.04     
!   LA        0.96     NL        1.01     OV        1.01     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.052509Jy  sigma=1.239806
! Fit after  self-cal, rms=0.052184Jy  sigma=1.236955
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.795 mas, bmaj=21.58 mas, bpa=-15.03 degrees
! Estimated noise=0.519394 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.66827e-05 Jy
! Component: 100  -  total flux cleaned = -0.000127232 Jy
! Component: 150  -  total flux cleaned = -0.000113847 Jy
! Component: 200  -  total flux cleaned = -9.03882e-05 Jy
! Total flux subtracted in 200 components = -9.03882e-05 Jy
! Clean residual min=-0.002471 max=0.002456 Jy/beam
! Clean residual mean=0.000005 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0464691 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 53 components and 0.0464691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052175Jy  sigma=1.236687
! Fit after  self-cal, rms=0.052210Jy  sigma=1.236254
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052210Jy  sigma=1.236254
! Fit after  self-cal, rms=0.052698Jy  sigma=1.231133
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.786 mas, bmaj=21.69 mas, bpa=-15.04 degrees
! Estimated noise=0.520359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141909 Jy
! Component: 100  -  total flux cleaned = -0.000127645 Jy
! Component: 150  -  total flux cleaned = -0.000141217 Jy
! Component: 200  -  total flux cleaned = -0.000153493 Jy
! Total flux subtracted in 200 components = -0.000153493 Jy
! Clean residual min=-0.002344 max=0.002098 Jy/beam
! Clean residual mean=0.000004 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.0463156 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 78 components and 0.0463156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052687Jy  sigma=1.230828
! Fit after  self-cal, rms=0.052764Jy  sigma=1.230356
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106131 Jy
! Component: 100  -  total flux cleaned = -0.000106185 Jy
! Component: 150  -  total flux cleaned = -9.46361e-05 Jy
! Component: 200  -  total flux cleaned = -8.37869e-05 Jy
! Total flux subtracted in 200 components = -8.37869e-05 Jy
! Clean residual min=-0.002330 max=0.002174 Jy/beam
! Clean residual mean=0.000004 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.0462318 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.0462318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052758Jy  sigma=1.230221
! Fit after  self-cal, rms=0.052760Jy  sigma=1.230199
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052760Jy  sigma=1.230199
! Fit after  self-cal, rms=0.053032Jy  sigma=1.229572
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.781 mas, bmaj=21.79 mas, bpa=-15.08 degrees
! Estimated noise=0.518961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000274475 Jy
! Component: 100  -  total flux cleaned = -0.000256475 Jy
! Component: 150  -  total flux cleaned = -0.000268043 Jy
! Component: 200  -  total flux cleaned = -0.000279168 Jy
! Total flux subtracted in 200 components = -0.000279168 Jy
! Clean residual min=-0.002254 max=0.001928 Jy/beam
! Clean residual mean=0.000004 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.0459526 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 96 components and 0.0459526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053023Jy  sigma=1.229369
! Fit after  self-cal, rms=0.053064Jy  sigma=1.229277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.56056e-05 Jy
! Component: 100  -  total flux cleaned = -6.47397e-05 Jy
! Component: 150  -  total flux cleaned = -4.35019e-05 Jy
! Component: 200  -  total flux cleaned = -3.31436e-05 Jy
! Total flux subtracted in 200 components = -3.31436e-05 Jy
! Clean residual min=-0.002241 max=0.001963 Jy/beam
! Clean residual mean=0.000004 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.0459195 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 102 components and 0.0459195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053059Jy  sigma=1.229176
! Fit after  self-cal, rms=0.053061Jy  sigma=1.229161
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053061Jy  sigma=1.229161
! Fit after  self-cal, rms=0.052952Jy  sigma=1.229091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.989 mas, bmaj=21.49 mas, bpa=-15.85 degrees
! Estimated noise=0.558098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.91681e-05 Jy
! Component: 100  -  total flux cleaned = 7.66323e-05 Jy
! Component: 150  -  total flux cleaned = 1.60419e-05 Jy
! Component: 200  -  total flux cleaned = -1.54797e-05 Jy
! Total flux subtracted in 200 components = -1.54797e-05 Jy
! Clean residual min=-0.002518 max=0.002152 Jy/beam
! Clean residual mean=0.000004 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.045904 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 126 components and 0.045904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052946Jy  sigma=1.229018
! Fit after  self-cal, rms=0.052952Jy  sigma=1.228996
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.28733e-05 Jy
! Component: 100  -  total flux cleaned = -5.36883e-05 Jy
! Component: 150  -  total flux cleaned = -2.578e-05 Jy
! Component: 200  -  total flux cleaned = 9.58731e-07 Jy
! Total flux subtracted in 200 components = 9.58731e-07 Jy
! Clean residual min=-0.002502 max=0.002141 Jy/beam
! Clean residual mean=0.000004 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.045905 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 139 components and 0.045905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052950Jy  sigma=1.228957
! Fit after  self-cal, rms=0.052950Jy  sigma=1.228948
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.777 mas, bmaj=21.87 mas, bpa=-15.13 degrees
! Estimated noise=0.517401 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.777 x 21.87 at -15.13 degrees (North through East)
! Clean map  min=-0.002218  max=0.04637 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.204 mas, bmaj=21.15 mas, bpa=-15.15 degrees
! Estimated noise=0.631674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0363415 Jy
! Component: 100  -  total flux cleaned = 0.0445991 Jy
! Component: 150  -  total flux cleaned = 0.0454469 Jy
! Component: 200  -  total flux cleaned = 0.0451144 Jy
! Total flux subtracted in 200 components = 0.0451144 Jy
! Clean residual min=-0.002906 max=0.002667 Jy/beam
! Clean residual mean=0.000002 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.0451144 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0451144 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.777 mas, bmaj=21.87 mas, bpa=-15.13 degrees
! Estimated noise=0.517401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149614 Jy
! Component: 100  -  total flux cleaned = 0.00135964 Jy
! Component: 150  -  total flux cleaned = 0.00116329 Jy
! Component: 200  -  total flux cleaned = 0.00103813 Jy
! Total flux subtracted in 200 components = 0.00103813 Jy
! Clean residual min=-0.002330 max=0.001948 Jy/beam
! Clean residual mean=0.000003 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.0461525 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 50 components and 0.0461525 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.989 mas, bmaj=21.49 mas, bpa=-15.85 degrees
! Estimated noise=0.558098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000165668 Jy
! Component: 100  -  total flux cleaned = 0.000123898 Jy
! Component: 150  -  total flux cleaned = 5.03361e-05 Jy
! Component: 200  -  total flux cleaned = -1.45632e-05 Jy
! Total flux subtracted in 200 components = -1.45632e-05 Jy
! Clean residual min=-0.002537 max=0.002273 Jy/beam
! Clean residual mean=0.000004 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.046138 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.96304e-05 Jy
! Component: 100  -  total flux cleaned = -0.000158505 Jy
! Component: 150  -  total flux cleaned = -0.00022265 Jy
! Component: 200  -  total flux cleaned = -0.000294447 Jy
! Total flux subtracted in 200 components = -0.000294447 Jy
! Clean residual min=-0.002516 max=0.002278 Jy/beam
! Clean residual mean=0.000004 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.0458435 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 84 components and 0.0458435 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.777 mas, bmaj=21.87 mas, bpa=-15.13 degrees
! Estimated noise=0.517401 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120729 Jy
! Component: 100  -  total flux cleaned = -0.000120247 Jy
! Component: 150  -  total flux cleaned = -9.25957e-05 Jy
! Component: 200  -  total flux cleaned = -7.96125e-05 Jy
! Total flux subtracted in 200 components = -7.96125e-05 Jy
! Clean residual min=-0.002279 max=0.001876 Jy/beam
! Clean residual mean=0.000003 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.0457639 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 95 components and 0.0457639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052965Jy  sigma=1.229268
! Fit after  self-cal, rms=0.052965Jy  sigma=1.229198
wmodel J0047+0319_S_map.mod
! Writing 95 model components to file: J0047+0319_S_map.mod
wobs   J0047+0319_S_uvs.fits
! Writing UV FITS file: J0047+0319_S_uvs.fits
wwins  J0047+0319_S_map.win
! wwins: Wrote 1 windows to J0047+0319_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000951459 Jy
! Component: 100  -  total flux cleaned = -0.00119247 Jy
! Component: 150  -  total flux cleaned = -0.00129056 Jy
! Component: 200  -  total flux cleaned = -0.00123069 Jy
! Component: 250  -  total flux cleaned = -0.0012012 Jy
! Component: 300  -  total flux cleaned = -0.00117334 Jy
! Component: 350  -  total flux cleaned = -0.00114696 Jy
! Component: 400  -  total flux cleaned = -0.00106889 Jy
! Component: 450  -  total flux cleaned = -0.00101832 Jy
! Component: 500  -  total flux cleaned = -0.000968923 Jy
! Component: 550  -  total flux cleaned = -0.000873921 Jy
! Component: 600  -  total flux cleaned = -0.000828232 Jy
! Component: 650  -  total flux cleaned = -0.000739152 Jy
! Component: 700  -  total flux cleaned = -0.000652654 Jy
! Component: 750  -  total flux cleaned = -0.000610595 Jy
! Component: 800  -  total flux cleaned = -0.000487801 Jy
! Component: 850  -  total flux cleaned = -0.000448753 Jy
! Component: 900  -  total flux cleaned = -0.000449237 Jy
! Component: 950  -  total flux cleaned = -0.000449043 Jy
! Component: 1000  -  total flux cleaned = -0.000448662 Jy
! Component: 1050  -  total flux cleaned = -0.000466509 Jy
! Component: 1100  -  total flux cleaned = -0.000448452 Jy
! Component: 1150  -  total flux cleaned = -0.000483057 Jy
! Component: 1200  -  total flux cleaned = -0.000466456 Jy
! Component: 1250  -  total flux cleaned = -0.000483452 Jy
! Component: 1300  -  total flux cleaned = -0.000565262 Jy
! Component: 1350  -  total flux cleaned = -0.000629492 Jy
! Component: 1400  -  total flux cleaned = -0.000724643 Jy
! Component: 1450  -  total flux cleaned = -0.000771496 Jy
! Component: 1500  -  total flux cleaned = -0.000894774 Jy
! Component: 1550  -  total flux cleaned = -0.000970617 Jy
! Component: 1600  -  total flux cleaned = -0.00107528 Jy
! Component: 1650  -  total flux cleaned = -0.00113411 Jy
! Component: 1700  -  total flux cleaned = -0.00123577 Jy
! Component: 1750  -  total flux cleaned = -0.00126448 Jy
! Component: 1800  -  total flux cleaned = -0.00136353 Jy
! Component: 1850  -  total flux cleaned = -0.00143322 Jy
! Component: 1900  -  total flux cleaned = -0.00150196 Jy
! Component: 1950  -  total flux cleaned = -0.00155641 Jy
! Component: 2000  -  total flux cleaned = -0.00159667 Jy
! Component: 2050  -  total flux cleaned = -0.0016762 Jy
! Component: 2100  -  total flux cleaned = -0.00171557 Jy
! Component: 2150  -  total flux cleaned = -0.00175439 Jy
! Component: 2200  -  total flux cleaned = -0.0018185 Jy
! Component: 2250  -  total flux cleaned = -0.00186924 Jy
! Component: 2300  -  total flux cleaned = -0.00194438 Jy
! Component: 2350  -  total flux cleaned = -0.00196915 Jy
! Component: 2400  -  total flux cleaned = -0.00198165 Jy
! Component: 2450  -  total flux cleaned = -0.00205477 Jy
! Component: 2500  -  total flux cleaned = -0.00206686 Jy
! Component: 2550  -  total flux cleaned = -0.00209084 Jy
! Component: 2600  -  total flux cleaned = -0.00213802 Jy
! Component: 2650  -  total flux cleaned = -0.00216135 Jy
! Component: 2700  -  total flux cleaned = -0.00218463 Jy
! Component: 2750  -  total flux cleaned = -0.00223074 Jy
! Component: 2800  -  total flux cleaned = -0.00226509 Jy
! Component: 2850  -  total flux cleaned = -0.00233312 Jy
! Component: 2900  -  total flux cleaned = -0.00236685 Jy
! Component: 2950  -  total flux cleaned = -0.0024338 Jy
! Component: 3000  -  total flux cleaned = -0.00247797 Jy
! Component: 3050  -  total flux cleaned = -0.00250003 Jy
! Component: 3100  -  total flux cleaned = -0.00255453 Jy
! Component: 3150  -  total flux cleaned = -0.00263005 Jy
! Component: 3200  -  total flux cleaned = -0.00267289 Jy
! Component: 3250  -  total flux cleaned = -0.0027155 Jy
! Component: 3300  -  total flux cleaned = -0.00275764 Jy
! Component: 3350  -  total flux cleaned = -0.00278905 Jy
! Component: 3400  -  total flux cleaned = -0.00283079 Jy
! Component: 3450  -  total flux cleaned = -0.00286185 Jy
! Component: 3500  -  total flux cleaned = -0.00292368 Jy
! Component: 3550  -  total flux cleaned = -0.002893 Jy
! Component: 3600  -  total flux cleaned = -0.00296442 Jy
! Component: 3650  -  total flux cleaned = -0.00299497 Jy
! Component: 3700  -  total flux cleaned = -0.00304532 Jy
! Component: 3750  -  total flux cleaned = -0.0030753 Jy
! Component: 3800  -  total flux cleaned = -0.0030753 Jy
! Component: 3850  -  total flux cleaned = -0.00312487 Jy
! Component: 3900  -  total flux cleaned = -0.00314458 Jy
! Component: 3950  -  total flux cleaned = -0.0031739 Jy
! Component: 4000  -  total flux cleaned = -0.00319343 Jy
! Component: 4050  -  total flux cleaned = -0.00321279 Jy
! Total flux subtracted in 4096 components = -0.00324172 Jy
! Clean residual min=-0.000580 max=0.000555 Jy/beam
! Clean residual mean=-0.000000 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.0425222 Jy
keep
! Adding 317 model components to the UV plane model.
! The established model now contains 412 components and 0.0425221 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0047+0319_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.777 x 21.87 at -15.13 degrees (North through East)
! Clean map  min=-0.0019065  max=0.045768 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0047+0319_S_map.fits
wmodel /vlbi/uf001/uva//J0047+0319_S_map.mod
! Writing 412 model components to file: /vlbi/uf001/uva//J0047+0319_S_map.mod
wobs   /vlbi/uf001/uva//J0047+0319_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0047+0319_S_uvs.fits
wwins  /vlbi/uf001/uva//J0047+0319_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0047+0319_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0457684 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00018619 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.22043 1.22043 2.44086 4.88171 9.76342 19.5268 39.0537 78.1074
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.045 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  245.815 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0047+0319_S_dfm.log closed on Sun Jan 13 20:43:07 2019