! Started logfile: /vlbi/uf001/uva//J0039+1411_S_dfm.log on Sun Jan 13 20:39:53 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0039+1411_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0039+1411_S_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.981865 visibilities/baseline/integration-bin.
! Found source: J0039+1411
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 11532 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0039+1411_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020731Jy  sigma=22.615972
! Fit after  self-cal, rms=0.794544Jy  sigma=17.537105
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.695 mas, bmaj=6.606 mas, bpa=-3.717 degrees
! Estimated noise=0.430004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153671 Jy
! Component: 100  -  total flux cleaned = 0.196632 Jy
! Total flux subtracted in 100 components = 0.196632 Jy
! Clean residual min=-0.006360 max=0.018701 Jy/beam
! Clean residual mean=-0.000014 rms=0.001815 Jy/beam
! Combined flux in latest and established models = 0.196632 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.196632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069494Jy  sigma=1.461413
! Fit after  self-cal, rms=0.069407Jy  sigma=1.459037
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206679 Jy
! Component: 100  -  total flux cleaned = 0.0312732 Jy
! Total flux subtracted in 100 components = 0.0312732 Jy
! Clean residual min=-0.004540 max=0.007254 Jy/beam
! Clean residual mean=-0.000008 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.227905 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.227905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061628Jy  sigma=1.286726
! Fit after  self-cal, rms=0.061582Jy  sigma=1.285740
! Inverting map 
! Added new window around map position (-3.5, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00751686 Jy
! Component: 100  -  total flux cleaned = 0.0121053 Jy
! Total flux subtracted in 100 components = 0.0121053 Jy
! Clean residual min=-0.003761 max=0.004775 Jy/beam
! Clean residual mean=-0.000005 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.24001 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 27 components and 0.24001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060380Jy  sigma=1.260953
! Fit after  self-cal, rms=0.060357Jy  sigma=1.260446
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.229 mas, bmaj=7.555 mas, bpa=-3.956 degrees
! Estimated noise=0.309756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0047121 Jy
! Component: 100  -  total flux cleaned = 0.00756235 Jy
! Component: 150  -  total flux cleaned = 0.00945953 Jy
! Component: 200  -  total flux cleaned = 0.010833 Jy
! Total flux subtracted in 200 components = 0.010833 Jy
! Clean residual min=-0.003806 max=0.004177 Jy/beam
! Clean residual mean=-0.000006 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.250843 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 60 components and 0.250843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059930Jy  sigma=1.251794
! Fit after  self-cal, rms=0.059909Jy  sigma=1.251294
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.229 x 7.555 at -3.956 degrees (North through East)
! Clean map  min=-0.0037965  max=0.20389 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.94     KP        1.01     
!   LA        1.01     MK        0.96     NL        1.00     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.98     KP        1.01     
!   LA        0.96     MK        1.01     NL        1.07     OV        0.94     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.99     KP        1.01     
!   LA        0.96     MK        1.08     NL        1.14     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.059909Jy  sigma=1.251294
! Fit after  self-cal, rms=0.059069Jy  sigma=1.220081
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=7.584 mas, bpa=-3.915 degrees
! Estimated noise=0.309694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000777096 Jy
! Component: 100  -  total flux cleaned = 0.000934857 Jy
! Component: 150  -  total flux cleaned = 0.000985539 Jy
! Component: 200  -  total flux cleaned = 0.00096461 Jy
! Total flux subtracted in 200 components = 0.00096461 Jy
! Clean residual min=-0.003167 max=0.002986 Jy/beam
! Clean residual mean=-0.000004 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.251808 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 0.251808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059035Jy  sigma=1.219484
! Fit after  self-cal, rms=0.059026Jy  sigma=1.219305
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059026Jy  sigma=1.219305
! Fit after  self-cal, rms=0.057463Jy  sigma=1.184579
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.234 mas, bmaj=7.574 mas, bpa=-3.931 degrees
! Estimated noise=0.310071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.4249e-05 Jy
! Component: 100  -  total flux cleaned = 0.000128948 Jy
! Component: 150  -  total flux cleaned = 0.000309102 Jy
! Component: 200  -  total flux cleaned = 0.000420286 Jy
! Total flux subtracted in 200 components = 0.000420286 Jy
! Clean residual min=-0.001430 max=0.001588 Jy/beam
! Clean residual mean=-0.000002 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.252228 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.252228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057442Jy  sigma=1.184171
! Fit after  self-cal, rms=0.057446Jy  sigma=1.184042
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-88, -75.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112576 Jy
! Component: 100  -  total flux cleaned = 0.0012492 Jy
! Component: 150  -  total flux cleaned = 0.00120064 Jy
! Component: 200  -  total flux cleaned = 0.00120099 Jy
! Total flux subtracted in 200 components = 0.00120099 Jy
! Clean residual min=-0.001392 max=0.001224 Jy/beam
! Clean residual mean=-0.000003 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.253429 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 104 components and 0.253429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057409Jy  sigma=1.183082
! Fit after  self-cal, rms=0.057408Jy  sigma=1.183051
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057408Jy  sigma=1.183051
! Fit after  self-cal, rms=0.057334Jy  sigma=1.181795
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=7.568 mas, bpa=-3.945 degrees
! Estimated noise=0.309695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280722 Jy
! Component: 100  -  total flux cleaned = 0.000431056 Jy
! Component: 150  -  total flux cleaned = 0.000502278 Jy
! Component: 200  -  total flux cleaned = 0.00051727 Jy
! Total flux subtracted in 200 components = 0.00051727 Jy
! Clean residual min=-0.001276 max=0.001257 Jy/beam
! Clean residual mean=-0.000003 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.253947 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 117 components and 0.253947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057320Jy  sigma=1.181528
! Fit after  self-cal, rms=0.057321Jy  sigma=1.181509
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.82486e-05 Jy
! Component: 100  -  total flux cleaned = 6.50981e-05 Jy
! Component: 150  -  total flux cleaned = 7.72502e-05 Jy
! Component: 200  -  total flux cleaned = 8.88726e-05 Jy
! Total flux subtracted in 200 components = 8.88726e-05 Jy
! Clean residual min=-0.001265 max=0.001234 Jy/beam
! Clean residual mean=-0.000003 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.254036 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 124 components and 0.254036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057315Jy  sigma=1.181396
! Fit after  self-cal, rms=0.057314Jy  sigma=1.181385
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057314Jy  sigma=1.181385
! Fit after  self-cal, rms=0.057309Jy  sigma=1.181355
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.158 mas, bmaj=10.93 mas, bpa=-5.308 degrees
! Estimated noise=0.395465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0003341 Jy
! Component: 100  -  total flux cleaned = 0.000366845 Jy
! Component: 150  -  total flux cleaned = 0.000326004 Jy
! Component: 200  -  total flux cleaned = 0.000317977 Jy
! Total flux subtracted in 200 components = 0.000317977 Jy
! Clean residual min=-0.001583 max=0.001268 Jy/beam
! Clean residual mean=-0.000007 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.254354 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 136 components and 0.254354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057306Jy  sigma=1.181332
! Fit after  self-cal, rms=0.057305Jy  sigma=1.181300
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.40097e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104965 Jy
! Component: 150  -  total flux cleaned = 9.72294e-05 Jy
! Component: 200  -  total flux cleaned = 9.71618e-05 Jy
! Total flux subtracted in 200 components = 9.71618e-05 Jy
! Clean residual min=-0.001590 max=0.001273 Jy/beam
! Clean residual mean=-0.000007 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.254451 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 140 components and 0.254451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057305Jy  sigma=1.181324
! Fit after  self-cal, rms=0.057304Jy  sigma=1.181313
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=7.568 mas, bpa=-3.96 degrees
! Estimated noise=0.30971 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.232 x 7.568 at -3.96 degrees (North through East)
! Clean map  min=-0.0012164  max=0.2033 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.702 mas, bmaj=6.628 mas, bpa=-3.732 degrees
! Estimated noise=0.431406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153916 Jy
! Component: 100  -  total flux cleaned = 0.197858 Jy
! Component: 150  -  total flux cleaned = 0.218637 Jy
! Component: 200  -  total flux cleaned = 0.229434 Jy
! Total flux subtracted in 200 components = 0.229434 Jy
! Clean residual min=-0.002824 max=0.005433 Jy/beam
! Clean residual mean=-0.000006 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.229434 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.229434 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=7.568 mas, bpa=-3.96 degrees
! Estimated noise=0.30971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00845125 Jy
! Component: 100  -  total flux cleaned = 0.0132036 Jy
! Component: 150  -  total flux cleaned = 0.0161227 Jy
! Component: 200  -  total flux cleaned = 0.0181601 Jy
! Total flux subtracted in 200 components = 0.0181601 Jy
! Clean residual min=-0.001532 max=0.001693 Jy/beam
! Clean residual mean=-0.000003 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.247594 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 80 components and 0.247594 Jy
! Inverting map 
! Added new window around map position (-8, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017527 Jy
! Component: 100  -  total flux cleaned = 0.00310895 Jy
! Component: 150  -  total flux cleaned = 0.00422674 Jy
! Component: 200  -  total flux cleaned = 0.00509141 Jy
! Total flux subtracted in 200 components = 0.00509141 Jy
! Clean residual min=-0.001394 max=0.001293 Jy/beam
! Clean residual mean=-0.000003 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.252685 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 115 components and 0.252685 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.158 mas, bmaj=10.93 mas, bpa=-5.308 degrees
! Estimated noise=0.395465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119062 Jy
! Component: 100  -  total flux cleaned = 0.00184135 Jy
! Component: 150  -  total flux cleaned = 0.00214206 Jy
! Component: 200  -  total flux cleaned = 0.00231513 Jy
! Total flux subtracted in 200 components = 0.00231513 Jy
! Clean residual min=-0.001623 max=0.001244 Jy/beam
! Clean residual mean=-0.000007 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.255 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167434 Jy
! Component: 100  -  total flux cleaned = 0.000313783 Jy
! Component: 150  -  total flux cleaned = 0.000417352 Jy
! Component: 200  -  total flux cleaned = 0.000498836 Jy
! Total flux subtracted in 200 components = 0.000498836 Jy
! Clean residual min=-0.001593 max=0.001262 Jy/beam
! Clean residual mean=-0.000007 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.255499 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 165 components and 0.255499 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=7.568 mas, bpa=-3.96 degrees
! Estimated noise=0.30971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.03431e-05 Jy
! Component: 100  -  total flux cleaned = 1.11256e-05 Jy
! Component: 150  -  total flux cleaned = 8.26742e-05 Jy
! Component: 200  -  total flux cleaned = 0.000129461 Jy
! Total flux subtracted in 200 components = 0.000129461 Jy
! Clean residual min=-0.001235 max=0.001239 Jy/beam
! Clean residual mean=-0.000003 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.255629 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 182 components and 0.255629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057282Jy  sigma=1.180696
! Fit after  self-cal, rms=0.057277Jy  sigma=1.180591
wmodel J0039+1411_S_map.mod
! Writing 182 model components to file: J0039+1411_S_map.mod
wobs   J0039+1411_S_uvs.fits
! Writing UV FITS file: J0039+1411_S_uvs.fits
wwins  J0039+1411_S_map.win
! wwins: Wrote 4 windows to J0039+1411_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166201 Jy
! Component: 100  -  total flux cleaned = -0.000403595 Jy
! Component: 150  -  total flux cleaned = -0.000588266 Jy
! Component: 200  -  total flux cleaned = -0.000588713 Jy
! Component: 250  -  total flux cleaned = -0.000588788 Jy
! Component: 300  -  total flux cleaned = -0.000607325 Jy
! Component: 350  -  total flux cleaned = -0.000607307 Jy
! Component: 400  -  total flux cleaned = -0.000607463 Jy
! Component: 450  -  total flux cleaned = -0.000590367 Jy
! Component: 500  -  total flux cleaned = -0.000524254 Jy
! Component: 550  -  total flux cleaned = -0.000541096 Jy
! Component: 600  -  total flux cleaned = -0.000573396 Jy
! Component: 650  -  total flux cleaned = -0.000604426 Jy
! Component: 700  -  total flux cleaned = -0.00061965 Jy
! Component: 750  -  total flux cleaned = -0.000634365 Jy
! Component: 800  -  total flux cleaned = -0.000590183 Jy
! Component: 850  -  total flux cleaned = -0.000546721 Jy
! Component: 900  -  total flux cleaned = -0.000490001 Jy
! Component: 950  -  total flux cleaned = -0.000476143 Jy
! Component: 1000  -  total flux cleaned = -0.000406967 Jy
! Component: 1050  -  total flux cleaned = -0.000393613 Jy
! Component: 1100  -  total flux cleaned = -0.000353394 Jy
! Component: 1150  -  total flux cleaned = -0.00036695 Jy
! Component: 1200  -  total flux cleaned = -0.000366844 Jy
! Component: 1250  -  total flux cleaned = -0.000328053 Jy
! Component: 1300  -  total flux cleaned = -0.00030289 Jy
! Component: 1350  -  total flux cleaned = -0.000277849 Jy
! Component: 1400  -  total flux cleaned = -0.000315281 Jy
! Component: 1450  -  total flux cleaned = -0.000241254 Jy
! Component: 1500  -  total flux cleaned = -0.000204652 Jy
! Component: 1550  -  total flux cleaned = -0.000156526 Jy
! Component: 1600  -  total flux cleaned = -0.000132858 Jy
! Component: 1650  -  total flux cleaned = -0.000120966 Jy
! Component: 1700  -  total flux cleaned = -8.60516e-05 Jy
! Component: 1750  -  total flux cleaned = -4.01818e-05 Jy
! Component: 1800  -  total flux cleaned = -1.74711e-05 Jy
! Component: 1850  -  total flux cleaned = 5.01771e-06 Jy
! Component: 1900  -  total flux cleaned = 3.81754e-05 Jy
! Component: 1950  -  total flux cleaned = 4.89954e-05 Jy
! Component: 2000  -  total flux cleaned = 4.89426e-05 Jy
! Component: 2050  -  total flux cleaned = 9.2443e-05 Jy
! Component: 2100  -  total flux cleaned = 0.00012446 Jy
! Component: 2150  -  total flux cleaned = 0.000124584 Jy
! Component: 2200  -  total flux cleaned = 0.000198164 Jy
! Component: 2250  -  total flux cleaned = 0.000218933 Jy
! Component: 2300  -  total flux cleaned = 0.000291248 Jy
! Component: 2350  -  total flux cleaned = 0.000270712 Jy
! Component: 2400  -  total flux cleaned = 0.000240326 Jy
! Component: 2450  -  total flux cleaned = 0.000290904 Jy
! Component: 2500  -  total flux cleaned = 0.000330938 Jy
! Component: 2550  -  total flux cleaned = 0.000330903 Jy
! Component: 2600  -  total flux cleaned = 0.000350446 Jy
! Component: 2650  -  total flux cleaned = 0.000340713 Jy
! Component: 2700  -  total flux cleaned = 0.000369775 Jy
! Component: 2750  -  total flux cleaned = 0.000408255 Jy
! Component: 2800  -  total flux cleaned = 0.000417658 Jy
! Component: 2850  -  total flux cleaned = 0.000436728 Jy
! Component: 2900  -  total flux cleaned = 0.000446164 Jy
! Component: 2950  -  total flux cleaned = 0.000446249 Jy
! Component: 3000  -  total flux cleaned = 0.00047391 Jy
! Component: 3050  -  total flux cleaned = 0.000483028 Jy
! Component: 3100  -  total flux cleaned = 0.00047393 Jy
! Component: 3150  -  total flux cleaned = 0.000501008 Jy
! Component: 3200  -  total flux cleaned = 0.000518902 Jy
! Component: 3250  -  total flux cleaned = 0.000527835 Jy
! Component: 3300  -  total flux cleaned = 0.000572178 Jy
! Component: 3350  -  total flux cleaned = 0.000572 Jy
! Component: 3400  -  total flux cleaned = 0.000615747 Jy
! Component: 3450  -  total flux cleaned = 0.00060711 Jy
! Component: 3500  -  total flux cleaned = 0.000650258 Jy
! Component: 3550  -  total flux cleaned = 0.000650238 Jy
! Component: 3600  -  total flux cleaned = 0.000684282 Jy
! Component: 3650  -  total flux cleaned = 0.000675926 Jy
! Component: 3700  -  total flux cleaned = 0.000709595 Jy
! Component: 3750  -  total flux cleaned = 0.000701242 Jy
! Component: 3800  -  total flux cleaned = 0.000750985 Jy
! Component: 3850  -  total flux cleaned = 0.000726229 Jy
! Component: 3900  -  total flux cleaned = 0.000742603 Jy
! Component: 3950  -  total flux cleaned = 0.000799411 Jy
! Component: 4000  -  total flux cleaned = 0.000750889 Jy
! Component: 4050  -  total flux cleaned = 0.000783059 Jy
! Total flux subtracted in 4096 components = 0.000798992 Jy
! Clean residual min=-0.000534 max=0.000449 Jy/beam
! Clean residual mean=-0.000001 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.256428 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 493 components and 0.256428 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0039+1411_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.232 x 7.568 at -3.96 degrees (North through East)
! Clean map  min=-0.0010671  max=0.20377 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0039+1411_S_map.fits
wmodel /vlbi/uf001/uva//J0039+1411_S_map.mod
! Writing 493 model components to file: /vlbi/uf001/uva//J0039+1411_S_map.mod
wobs   /vlbi/uf001/uva//J0039+1411_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0039+1411_S_uvs.fits
wwins  /vlbi/uf001/uva//J0039+1411_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0039+1411_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.20377 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000149201 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.21966 0.21966 0.439321 0.878641 1.75728 3.51456 7.02913 14.0583 28.1165 56.233
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1365.74 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0039+1411_S_dfm.log closed on Sun Jan 13 20:39:58 2019