! Started logfile: /vlbi/uf001/uva//J0034-0054_S_dfm.log on Sun Jan 13 20:36:54 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0034-0054_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0034-0054_S_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994737 visibilities/baseline/integration-bin. ! Found source: J0034-0054 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5103 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0034-0054_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.004659Jy sigma=22.400120 ! Fit after self-cal, rms=0.928862Jy sigma=20.693905 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=6.994 mas, bpa=-2.424 degrees ! Estimated noise=0.527827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547279 Jy ! Component: 100 - total flux cleaned = 0.0702634 Jy ! Total flux subtracted in 100 components = 0.0702634 Jy ! Clean residual min=-0.004336 max=0.006814 Jy/beam ! Clean residual mean=0.000010 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.0702634 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0702634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065152Jy sigma=1.362701 ! Fit after self-cal, rms=0.064827Jy sigma=1.357474 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791007 Jy ! Component: 100 - total flux cleaned = 0.0120698 Jy ! Total flux subtracted in 100 components = 0.0120698 Jy ! Clean residual min=-0.004308 max=0.003830 Jy/beam ! Clean residual mean=0.000005 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0823331 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0823331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063805Jy sigma=1.329953 ! Fit after self-cal, rms=0.063785Jy sigma=1.329398 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.851 mas, bpa=-3.726 degrees ! Estimated noise=0.456426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356639 Jy ! Component: 100 - total flux cleaned = 0.0054079 Jy ! Component: 150 - total flux cleaned = 0.00650654 Jy ! Component: 200 - total flux cleaned = 0.00722992 Jy ! Total flux subtracted in 200 components = 0.00722992 Jy ! Clean residual min=-0.003463 max=0.003587 Jy/beam ! Clean residual mean=0.000005 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.089563 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.089563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063616Jy sigma=1.324438 ! Fit after self-cal, rms=0.063620Jy sigma=1.324317 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 7.851 at -3.726 degrees (North through East) ! Clean map min=-0.0033047 max=0.072392 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.90 KP 1.00 ! LA 1.01 MK 0.99 NL 0.99 OV 1.02 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.01 HN 0.99 KP 0.97 ! LA 0.99 MK 1.00 NL 0.98 OV 0.93 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.97 HN 0.98 KP 1.00 ! LA 0.97 MK 1.13 NL 1.00 OV 1.04 ! PT 0.95 SC 0.99 ! ! ! Fit before self-cal, rms=0.063620Jy sigma=1.324317 ! Fit after self-cal, rms=0.066816Jy sigma=1.316575 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.923 mas, bpa=-3.556 degrees ! Estimated noise=0.456411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193844 Jy ! Component: 100 - total flux cleaned = -0.000255173 Jy ! Component: 150 - total flux cleaned = -0.000279668 Jy ! Component: 200 - total flux cleaned = -0.000279559 Jy ! Total flux subtracted in 200 components = -0.000279559 Jy ! Clean residual min=-0.003481 max=0.003432 Jy/beam ! Clean residual mean=0.000004 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.0892835 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.0892835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066781Jy sigma=1.316159 ! Fit after self-cal, rms=0.066860Jy sigma=1.315916 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066860Jy sigma=1.315916 ! Fit after self-cal, rms=0.069822Jy sigma=1.301294 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.937 mas, bpa=-3.776 degrees ! Estimated noise=0.453689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.76551e-06 Jy ! Component: 100 - total flux cleaned = -4.06448e-05 Jy ! Component: 150 - total flux cleaned = -8.51311e-05 Jy ! Component: 200 - total flux cleaned = -0.000125903 Jy ! Total flux subtracted in 200 components = -0.000125903 Jy ! Clean residual min=-0.002701 max=0.002582 Jy/beam ! Clean residual mean=0.000006 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0891576 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.0891576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069804Jy sigma=1.300864 ! Fit after self-cal, rms=0.069899Jy sigma=1.300452 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108237 Jy ! Component: 100 - total flux cleaned = -0.000143057 Jy ! Component: 150 - total flux cleaned = -0.000174628 Jy ! Component: 200 - total flux cleaned = -0.000203865 Jy ! Total flux subtracted in 200 components = -0.000203865 Jy ! Clean residual min=-0.002702 max=0.002573 Jy/beam ! Clean residual mean=0.000006 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0889537 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.0889537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069890Jy sigma=1.300257 ! Fit after self-cal, rms=0.069888Jy sigma=1.300251 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069888Jy sigma=1.300251 ! Fit after self-cal, rms=0.071125Jy sigma=1.300262 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.938 mas, bpa=-3.731 degrees ! Estimated noise=0.455163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188943 Jy ! Component: 100 - total flux cleaned = 0.000175114 Jy ! Component: 150 - total flux cleaned = 0.000148119 Jy ! Component: 200 - total flux cleaned = 0.000123084 Jy ! Total flux subtracted in 200 components = 0.000123084 Jy ! Clean residual min=-0.002710 max=0.002539 Jy/beam ! Clean residual mean=0.000006 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0890768 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.0890768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071118Jy sigma=1.300116 ! Fit after self-cal, rms=0.071127Jy sigma=1.300099 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.51879e-06 Jy ! Component: 100 - total flux cleaned = -2.08992e-06 Jy ! Component: 150 - total flux cleaned = -1.32011e-05 Jy ! Component: 200 - total flux cleaned = -1.32135e-05 Jy ! Total flux subtracted in 200 components = -1.32135e-05 Jy ! Clean residual min=-0.002714 max=0.002545 Jy/beam ! Clean residual mean=0.000006 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0890636 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.0890636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071122Jy sigma=1.300017 ! Fit after self-cal, rms=0.071121Jy sigma=1.300012 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071121Jy sigma=1.300012 ! Fit after self-cal, rms=0.071492Jy sigma=1.300026 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.207 mas, bmaj=12.67 mas, bpa=-3.071 degrees ! Estimated noise=0.584163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387448 Jy ! Component: 100 - total flux cleaned = 0.00038792 Jy ! Component: 150 - total flux cleaned = 0.000356741 Jy ! Component: 200 - total flux cleaned = 0.000334149 Jy ! Total flux subtracted in 200 components = 0.000334149 Jy ! Clean residual min=-0.003178 max=0.002578 Jy/beam ! Clean residual mean=0.000012 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0893978 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 68 components and 0.0893978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071502Jy sigma=1.300205 ! Fit after self-cal, rms=0.071502Jy sigma=1.300065 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.56258e-05 Jy ! Component: 100 - total flux cleaned = -3.55371e-05 Jy ! Component: 150 - total flux cleaned = -5.99721e-05 Jy ! Component: 200 - total flux cleaned = -7.81973e-05 Jy ! Total flux subtracted in 200 components = -7.81973e-05 Jy ! Clean residual min=-0.003180 max=0.002579 Jy/beam ! Clean residual mean=0.000013 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0893196 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.0893196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071512Jy sigma=1.300276 ! Fit after self-cal, rms=0.071512Jy sigma=1.300200 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.939 mas, bpa=-3.711 degrees ! Estimated noise=0.456356 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.939 at -3.711 degrees (North through East) ! Clean map min=-0.0025938 max=0.072906 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.064 mas, bpa=-2.363 degrees ! Estimated noise=0.528377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547334 Jy ! Component: 100 - total flux cleaned = 0.0712134 Jy ! Component: 150 - total flux cleaned = 0.0791842 Jy ! Component: 200 - total flux cleaned = 0.0833262 Jy ! Total flux subtracted in 200 components = 0.0833262 Jy ! Clean residual min=-0.002865 max=0.002779 Jy/beam ! Clean residual mean=0.000007 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0833262 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0833262 Jy ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.939 mas, bpa=-3.711 degrees ! Estimated noise=0.456356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319507 Jy ! Component: 100 - total flux cleaned = 0.0048219 Jy ! Component: 150 - total flux cleaned = 0.00550096 Jy ! Component: 200 - total flux cleaned = 0.0055848 Jy ! Total flux subtracted in 200 components = 0.0055848 Jy ! Clean residual min=-0.002763 max=0.002532 Jy/beam ! Clean residual mean=0.000007 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.088911 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.088911 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.207 mas, bmaj=12.67 mas, bpa=-3.071 degrees ! Estimated noise=0.584163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050186 Jy ! Component: 100 - total flux cleaned = 0.000505557 Jy ! Component: 150 - total flux cleaned = 0.000456004 Jy ! Component: 200 - total flux cleaned = 0.000418275 Jy ! Total flux subtracted in 200 components = 0.000418275 Jy ! Clean residual min=-0.003195 max=0.002659 Jy/beam ! Clean residual mean=0.000013 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0893292 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.01865e-05 Jy ! Component: 100 - total flux cleaned = -2.05813e-05 Jy ! Component: 150 - total flux cleaned = -2.89241e-05 Jy ! Component: 200 - total flux cleaned = -4.38035e-05 Jy ! Total flux subtracted in 200 components = -4.38035e-05 Jy ! Clean residual min=-0.003197 max=0.002632 Jy/beam ! Clean residual mean=0.000013 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0892854 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0892854 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.939 mas, bpa=-3.711 degrees ! Estimated noise=0.456356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277556 Jy ! Component: 100 - total flux cleaned = -0.00033082 Jy ! Component: 150 - total flux cleaned = -0.00032843 Jy ! Component: 200 - total flux cleaned = -0.000327026 Jy ! Total flux subtracted in 200 components = -0.000327026 Jy ! Clean residual min=-0.002760 max=0.002531 Jy/beam ! Clean residual mean=0.000006 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0889584 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.0889584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071517Jy sigma=1.300196 ! Fit after self-cal, rms=0.071519Jy sigma=1.300165 wmodel J0034-0054_S_map.mod ! Writing 51 model components to file: J0034-0054_S_map.mod wobs J0034-0054_S_uvs.fits ! Writing UV FITS file: J0034-0054_S_uvs.fits wwins J0034-0054_S_map.win ! wwins: Wrote 1 windows to J0034-0054_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154058 Jy ! Component: 100 - total flux cleaned = 0.000493586 Jy ! Component: 150 - total flux cleaned = 0.000534695 Jy ! Component: 200 - total flux cleaned = 0.000611089 Jy ! Component: 250 - total flux cleaned = 0.000647336 Jy ! Component: 300 - total flux cleaned = 0.000647077 Jy ! Component: 350 - total flux cleaned = 0.000612467 Jy ! Component: 400 - total flux cleaned = 0.000645707 Jy ! Component: 450 - total flux cleaned = 0.000710405 Jy ! Component: 500 - total flux cleaned = 0.000803955 Jy ! Component: 550 - total flux cleaned = 0.000894704 Jy ! Component: 600 - total flux cleaned = 0.000953509 Jy ! Component: 650 - total flux cleaned = 0.000894751 Jy ! Component: 700 - total flux cleaned = 0.000895084 Jy ! Component: 750 - total flux cleaned = 0.000867411 Jy ! Component: 800 - total flux cleaned = 0.000840687 Jy ! Component: 850 - total flux cleaned = 0.000787805 Jy ! Component: 900 - total flux cleaned = 0.00068308 Jy ! Component: 950 - total flux cleaned = 0.000631247 Jy ! Component: 1000 - total flux cleaned = 0.000530481 Jy ! Component: 1050 - total flux cleaned = 0.000455984 Jy ! Component: 1100 - total flux cleaned = 0.000285599 Jy ! Component: 1150 - total flux cleaned = 0.000190152 Jy ! Component: 1200 - total flux cleaned = 0.000119312 Jy ! Component: 1250 - total flux cleaned = 2.61584e-05 Jy ! Component: 1300 - total flux cleaned = -0.000179127 Jy ! Component: 1350 - total flux cleaned = -0.000246993 Jy ! Component: 1400 - total flux cleaned = -0.000401712 Jy ! Component: 1450 - total flux cleaned = -0.000554727 Jy ! Component: 1500 - total flux cleaned = -0.000640796 Jy ! Component: 1550 - total flux cleaned = -0.00074707 Jy ! Component: 1600 - total flux cleaned = -0.000768064 Jy ! Component: 1650 - total flux cleaned = -0.000912911 Jy ! Component: 1700 - total flux cleaned = -0.000993984 Jy ! Component: 1750 - total flux cleaned = -0.000993696 Jy ! Component: 1800 - total flux cleaned = -0.0010139 Jy ! Component: 1850 - total flux cleaned = -0.00113207 Jy ! Component: 1900 - total flux cleaned = -0.00115097 Jy ! Component: 1950 - total flux cleaned = -0.00109337 Jy ! Component: 2000 - total flux cleaned = -0.00109343 Jy ! Component: 2050 - total flux cleaned = -0.0011494 Jy ! Component: 2100 - total flux cleaned = -0.00111236 Jy ! Component: 2150 - total flux cleaned = -0.00113096 Jy ! Component: 2200 - total flux cleaned = -0.00113117 Jy ! Component: 2250 - total flux cleaned = -0.00116678 Jy ! Component: 2300 - total flux cleaned = -0.00116664 Jy ! Component: 2350 - total flux cleaned = -0.00111415 Jy ! Component: 2400 - total flux cleaned = -0.00114907 Jy ! Component: 2450 - total flux cleaned = -0.00111468 Jy ! Component: 2500 - total flux cleaned = -0.00111497 Jy ! Component: 2550 - total flux cleaned = -0.00109839 Jy ! Component: 2600 - total flux cleaned = -0.00109845 Jy ! Component: 2650 - total flux cleaned = -0.00111509 Jy ! Component: 2700 - total flux cleaned = -0.00111504 Jy ! Component: 2750 - total flux cleaned = -0.00113115 Jy ! Component: 2800 - total flux cleaned = -0.00113112 Jy ! Component: 2850 - total flux cleaned = -0.0011312 Jy ! Component: 2900 - total flux cleaned = -0.00116263 Jy ! Component: 2950 - total flux cleaned = -0.00117806 Jy ! Component: 3000 - total flux cleaned = -0.00116268 Jy ! Component: 3050 - total flux cleaned = -0.00119296 Jy ! Component: 3100 - total flux cleaned = -0.00119292 Jy ! Component: 3150 - total flux cleaned = -0.0011482 Jy ! Component: 3200 - total flux cleaned = -0.00122243 Jy ! Component: 3250 - total flux cleaned = -0.00126638 Jy ! Component: 3300 - total flux cleaned = -0.00122305 Jy ! Component: 3350 - total flux cleaned = -0.00128098 Jy ! Component: 3400 - total flux cleaned = -0.00133837 Jy ! Component: 3450 - total flux cleaned = -0.00136669 Jy ! Component: 3500 - total flux cleaned = -0.00136678 Jy ! Component: 3550 - total flux cleaned = -0.00142252 Jy ! Component: 3600 - total flux cleaned = -0.0014362 Jy ! Component: 3650 - total flux cleaned = -0.00142265 Jy ! Component: 3700 - total flux cleaned = -0.0014635 Jy ! Component: 3750 - total flux cleaned = -0.00147721 Jy ! Component: 3800 - total flux cleaned = -0.00149074 Jy ! Component: 3850 - total flux cleaned = -0.00147738 Jy ! Component: 3900 - total flux cleaned = -0.00146439 Jy ! Component: 3950 - total flux cleaned = -0.0015693 Jy ! Component: 4000 - total flux cleaned = -0.00158202 Jy ! Component: 4050 - total flux cleaned = -0.00151738 Jy ! Total flux subtracted in 4096 components = -0.00156873 Jy ! Clean residual min=-0.000928 max=0.000689 Jy/beam ! Clean residual mean=0.000002 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.0873897 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 339 components and 0.0873896 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0034-0054_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.939 at -3.711 degrees (North through East) ! Clean map min=-0.001961 max=0.072762 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0034-0054_S_map.fits wmodel /vlbi/uf001/uva//J0034-0054_S_map.mod ! Writing 339 model components to file: /vlbi/uf001/uva//J0034-0054_S_map.mod wobs /vlbi/uf001/uva//J0034-0054_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0034-0054_S_uvs.fits wwins /vlbi/uf001/uva//J0034-0054_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0034-0054_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0727623 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230609 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.950804 0.950804 1.90161 3.80321 7.60643 15.2129 30.4257 60.8514 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.072 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 315.522 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0034-0054_S_dfm.log closed on Sun Jan 13 20:36:59 2019