! Started logfile: /vlbi/uf001/uva//J0034+2754_X_dfm.log on Sun Jan 13 20:36:46 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0034+2754_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0034+2754_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98179 visibilities/baseline/integration-bin. ! Found source: J0034+2754 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38172 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0034+2754_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021975Jy sigma=23.984292 ! Fit after self-cal, rms=0.862004Jy sigma=20.289697 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7181 mas, bmaj=1.402 mas, bpa=-3.382 degrees ! Estimated noise=0.319674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0940344 Jy ! Component: 100 - total flux cleaned = 0.123604 Jy ! Total flux subtracted in 100 components = 0.123604 Jy ! Clean residual min=-0.013092 max=0.045252 Jy/beam ! Clean residual mean=0.000031 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 0.123604 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.123604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127671Jy sigma=2.854486 ! Fit after self-cal, rms=0.127389Jy sigma=2.846377 ! Inverting map ! Added new window around map position (1.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373641 Jy ! Component: 100 - total flux cleaned = 0.0538838 Jy ! Total flux subtracted in 100 components = 0.0538838 Jy ! Clean residual min=-0.010634 max=0.040563 Jy/beam ! Clean residual mean=0.000025 rms=0.002811 Jy/beam ! Combined flux in latest and established models = 0.177488 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.177488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109892Jy sigma=2.463561 ! Fit after self-cal, rms=0.107443Jy sigma=2.406636 ! Inverting map ! Added new window around map position (-3.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363095 Jy ! Component: 100 - total flux cleaned = 0.0565838 Jy ! Total flux subtracted in 100 components = 0.0565838 Jy ! Clean residual min=-0.007184 max=0.012956 Jy/beam ! Clean residual mean=0.000018 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.234072 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.234072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086202Jy sigma=1.925482 ! Fit after self-cal, rms=0.083955Jy sigma=1.866208 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186639 Jy ! Component: 100 - total flux cleaned = 0.0318643 Jy ! Total flux subtracted in 100 components = 0.0318643 Jy ! Clean residual min=-0.005804 max=0.012486 Jy/beam ! Clean residual mean=0.000014 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.265936 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.265936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074881Jy sigma=1.663630 ! Fit after self-cal, rms=0.074413Jy sigma=1.651519 ! Inverting map ! Added new window around map position (-4.4, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132084 Jy ! Component: 100 - total flux cleaned = 0.0233062 Jy ! Total flux subtracted in 100 components = 0.0233062 Jy ! Clean residual min=-0.004991 max=0.007154 Jy/beam ! Clean residual mean=0.000011 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.289243 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.289243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068806Jy sigma=1.526210 ! Fit after self-cal, rms=0.068637Jy sigma=1.522017 ! Inverting map ! Added new window around map position (-5.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00924379 Jy ! Component: 100 - total flux cleaned = 0.01681 Jy ! Total flux subtracted in 100 components = 0.01681 Jy ! Clean residual min=-0.004428 max=0.005451 Jy/beam ! Clean residual mean=0.000009 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.306053 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.306053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065387Jy sigma=1.451105 ! Fit after self-cal, rms=0.065311Jy sigma=1.449260 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.915 mas, bmaj=1.747 mas, bpa=-2.607 degrees ! Estimated noise=0.156135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147249 Jy ! Component: 100 - total flux cleaned = 0.0259836 Jy ! Component: 150 - total flux cleaned = 0.0350913 Jy ! Component: 200 - total flux cleaned = 0.0427033 Jy ! Total flux subtracted in 200 components = 0.0427033 Jy ! Clean residual min=-0.005076 max=0.009679 Jy/beam ! Clean residual mean=0.000007 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.348756 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 104 components and 0.348756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059748Jy sigma=1.333406 ! Fit after self-cal, rms=0.059573Jy sigma=1.328929 ! Inverting map ! Added new window around map position (-1.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950219 Jy ! Component: 100 - total flux cleaned = 0.0162888 Jy ! Component: 150 - total flux cleaned = 0.0220697 Jy ! Component: 200 - total flux cleaned = 0.027158 Jy ! Total flux subtracted in 200 components = 0.027158 Jy ! Clean residual min=-0.004484 max=0.004728 Jy/beam ! Clean residual mean=0.000003 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.375914 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 155 components and 0.375914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057177Jy sigma=1.277166 ! Fit after self-cal, rms=0.057107Jy sigma=1.275294 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.915 x 1.747 at -2.607 degrees (North through East) ! Clean map min=-0.0043838 max=0.12469 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.94 KP 1.01 ! LA 0.99 MK 1.04 NL 1.09 OV 0.93 ! PT 0.85 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.95 KP 1.02 ! LA 0.98 MK 1.05 NL 1.10 OV 0.94 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.98 KP 1.03 ! LA 0.98 MK 1.03 NL 1.07 OV 0.94 ! PT 0.83 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.98 KP 1.02 ! LA 0.98 MK 1.01 NL 1.07 OV 0.96 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.97 KP 1.02 ! LA 0.98 MK 1.03 NL 1.10 OV 0.93 ! PT 0.84 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.94 KP 1.03 ! LA 0.99 MK 1.02 NL 1.09 OV 0.96 ! PT 0.85 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.96 KP 1.03 ! LA 0.98 MK 1.03 NL 1.09 OV 0.94 ! PT 0.85 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.97 KP 1.03 ! LA 0.99 MK 1.03 NL 1.09 OV 0.94 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.94 KP 1.03 ! LA 0.99 MK 1.00 NL 1.09 OV 0.94 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.98 KP 1.03 ! LA 1.00 MK 1.04 NL 1.08 OV 0.95 ! PT 0.84 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.96 KP 1.02 ! LA 1.00 MK 1.03 NL 1.09 OV 0.94 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 0.95 KP 1.04 ! LA 0.99 MK 1.02 NL 1.08 OV 0.94 ! PT 0.87 SC 1.00 ! ! ! Fit before self-cal, rms=0.057107Jy sigma=1.275294 ! Fit after self-cal, rms=0.052319Jy sigma=1.200798 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9191 mas, bmaj=1.762 mas, bpa=-2.216 degrees ! Estimated noise=0.153483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357773 Jy ! Component: 100 - total flux cleaned = 0.00446389 Jy ! Component: 150 - total flux cleaned = 0.0047812 Jy ! Component: 200 - total flux cleaned = 0.00510725 Jy ! Total flux subtracted in 200 components = 0.00510725 Jy ! Clean residual min=-0.001661 max=0.001827 Jy/beam ! Clean residual mean=0.000002 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.381021 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 181 components and 0.381021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052004Jy sigma=1.192813 ! Fit after self-cal, rms=0.051993Jy sigma=1.191730 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051993Jy sigma=1.191730 ! Fit after self-cal, rms=0.051660Jy sigma=1.186887 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9196 mas, bmaj=1.764 mas, bpa=-2.334 degrees ! Estimated noise=0.153303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111833 Jy ! Component: 100 - total flux cleaned = 0.00124945 Jy ! Component: 150 - total flux cleaned = 0.00130207 Jy ! Component: 200 - total flux cleaned = 0.00143091 Jy ! Total flux subtracted in 200 components = 0.00143091 Jy ! Clean residual min=-0.001107 max=0.001235 Jy/beam ! Clean residual mean=0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.382452 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 200 components and 0.382452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051544Jy sigma=1.183878 ! Fit after self-cal, rms=0.051533Jy sigma=1.183561 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.6, 13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0009576 Jy ! Component: 100 - total flux cleaned = 0.0012086 Jy ! Component: 150 - total flux cleaned = 0.00131691 Jy ! Component: 200 - total flux cleaned = 0.00141644 Jy ! Total flux subtracted in 200 components = 0.00141644 Jy ! Clean residual min=-0.001017 max=0.001046 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.383868 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 217 components and 0.383868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051476Jy sigma=1.182146 ! Fit after self-cal, rms=0.051471Jy sigma=1.182036 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051471Jy sigma=1.182036 ! Fit after self-cal, rms=0.051362Jy sigma=1.181769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9186 mas, bmaj=1.764 mas, bpa=-2.371 degrees ! Estimated noise=0.15313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101799 Jy ! Component: 100 - total flux cleaned = 0.000206963 Jy ! Component: 150 - total flux cleaned = 0.000301124 Jy ! Component: 200 - total flux cleaned = 0.000414396 Jy ! Total flux subtracted in 200 components = 0.000414396 Jy ! Clean residual min=-0.000941 max=0.000949 Jy/beam ! Clean residual mean=0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.384283 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 225 components and 0.384283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051322Jy sigma=1.180798 ! Fit after self-cal, rms=0.051319Jy sigma=1.180736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252132 Jy ! Component: 100 - total flux cleaned = 0.000303518 Jy ! Component: 150 - total flux cleaned = 0.000377434 Jy ! Component: 200 - total flux cleaned = 0.000422583 Jy ! Total flux subtracted in 200 components = 0.000422583 Jy ! Clean residual min=-0.000874 max=0.000883 Jy/beam ! Clean residual mean=0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.384705 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 238 components and 0.384705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051297Jy sigma=1.180199 ! Fit after self-cal, rms=0.051295Jy sigma=1.180169 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051295Jy sigma=1.180169 ! Fit after self-cal, rms=0.051237Jy sigma=1.180046 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=2.737 mas, bpa=-2.258 degrees ! Estimated noise=0.193332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253386 Jy ! Component: 100 - total flux cleaned = 0.00036357 Jy ! Component: 150 - total flux cleaned = 0.000407681 Jy ! Component: 200 - total flux cleaned = 0.00036746 Jy ! Total flux subtracted in 200 components = 0.00036746 Jy ! Clean residual min=-0.000886 max=0.001002 Jy/beam ! Clean residual mean=0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.385073 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 263 components and 0.385073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051223Jy sigma=1.179691 ! Fit after self-cal, rms=0.051221Jy sigma=1.179634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.4, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756604 Jy ! Component: 100 - total flux cleaned = 0.000800885 Jy ! Component: 150 - total flux cleaned = 0.000820106 Jy ! Component: 200 - total flux cleaned = 0.000803403 Jy ! Total flux subtracted in 200 components = 0.000803403 Jy ! Clean residual min=-0.000768 max=0.000849 Jy/beam ! Clean residual mean=0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.385876 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 302 components and 0.385876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051208Jy sigma=1.179308 ! Fit after self-cal, rms=0.051207Jy sigma=1.179293 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9177 mas, bmaj=1.763 mas, bpa=-2.377 degrees ! Estimated noise=0.153028 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9177 x 1.763 at -2.377 degrees (North through East) ! Clean map min=-0.00073839 max=0.12143 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7185 mas, bmaj=1.41 mas, bpa=-2.98 degrees ! Estimated noise=0.31573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0972095 Jy ! Component: 100 - total flux cleaned = 0.149447 Jy ! Component: 150 - total flux cleaned = 0.184816 Jy ! Component: 200 - total flux cleaned = 0.211901 Jy ! Total flux subtracted in 200 components = 0.211901 Jy ! Clean residual min=-0.005960 max=0.015969 Jy/beam ! Clean residual mean=0.000021 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 0.211901 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.211901 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9177 mas, bmaj=1.763 mas, bpa=-2.377 degrees ! Estimated noise=0.153028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372423 Jy ! Component: 100 - total flux cleaned = 0.0633679 Jy ! Component: 150 - total flux cleaned = 0.0825955 Jy ! Component: 200 - total flux cleaned = 0.0972091 Jy ! Total flux subtracted in 200 components = 0.0972091 Jy ! Clean residual min=-0.003851 max=0.008586 Jy/beam ! Clean residual mean=0.000015 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.30911 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 47 components and 0.30911 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011551 Jy ! Component: 100 - total flux cleaned = 0.0208546 Jy ! Component: 150 - total flux cleaned = 0.0284064 Jy ! Component: 200 - total flux cleaned = 0.0346227 Jy ! Total flux subtracted in 200 components = 0.0346227 Jy ! Clean residual min=-0.001977 max=0.003771 Jy/beam ! Clean residual mean=0.000008 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.343733 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 91 components and 0.343733 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051838 Jy ! Component: 100 - total flux cleaned = 0.00955684 Jy ! Component: 150 - total flux cleaned = 0.0132876 Jy ! Component: 200 - total flux cleaned = 0.0164915 Jy ! Total flux subtracted in 200 components = 0.0164915 Jy ! Clean residual min=-0.001490 max=0.002033 Jy/beam ! Clean residual mean=0.000004 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.360224 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 146 components and 0.360224 Jy ! Inverting map ! Added new window around map position (-4.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278799 Jy ! Component: 100 - total flux cleaned = 0.00521673 Jy ! Component: 150 - total flux cleaned = 0.00734119 Jy ! Component: 200 - total flux cleaned = 0.00920503 Jy ! Total flux subtracted in 200 components = 0.00920503 Jy ! Clean residual min=-0.001185 max=0.001291 Jy/beam ! Clean residual mean=0.000003 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.369429 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 188 components and 0.369429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=2.737 mas, bpa=-2.258 degrees ! Estimated noise=0.193332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032273 Jy ! Component: 100 - total flux cleaned = 0.00565141 Jy ! Component: 150 - total flux cleaned = 0.00755779 Jy ! Component: 200 - total flux cleaned = 0.00909918 Jy ! Total flux subtracted in 200 components = 0.00909918 Jy ! Clean residual min=-0.000972 max=0.001228 Jy/beam ! Clean residual mean=0.000003 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.378528 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127004 Jy ! Component: 100 - total flux cleaned = 0.00233715 Jy ! Component: 150 - total flux cleaned = 0.00323971 Jy ! Component: 200 - total flux cleaned = 0.0040093 Jy ! Total flux subtracted in 200 components = 0.0040093 Jy ! Clean residual min=-0.000805 max=0.001090 Jy/beam ! Clean residual mean=0.000002 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.382538 Jy ! Adding 140 model components to the UV plane model. ! The established model now contains 294 components and 0.382538 Jy ! Inverting map ! Added new window around map position (46, 19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910292 Jy ! Component: 100 - total flux cleaned = 0.0013067 Jy ! Component: 150 - total flux cleaned = 0.00172708 Jy ! Component: 200 - total flux cleaned = 0.00204907 Jy ! Total flux subtracted in 200 components = 0.00204907 Jy ! Clean residual min=-0.000732 max=0.000846 Jy/beam ! Clean residual mean=0.000002 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.384587 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 327 components and 0.384587 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9177 mas, bmaj=1.763 mas, bpa=-2.377 degrees ! Estimated noise=0.153028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231033 Jy ! Component: 100 - total flux cleaned = 0.000400582 Jy ! Component: 150 - total flux cleaned = 0.0005337 Jy ! Component: 200 - total flux cleaned = 0.000659268 Jy ! Total flux subtracted in 200 components = 0.000659268 Jy ! Clean residual min=-0.000738 max=0.000763 Jy/beam ! Clean residual mean=0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.385246 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 361 components and 0.385246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051143Jy sigma=1.177981 ! Fit after self-cal, rms=0.051135Jy sigma=1.177870 wmodel J0034+2754_X_map.mod ! Writing 361 model components to file: J0034+2754_X_map.mod wobs J0034+2754_X_uvs.fits ! Writing UV FITS file: J0034+2754_X_uvs.fits wwins J0034+2754_X_map.win ! wwins: Wrote 11 windows to J0034+2754_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.9346e-05 Jy ! Component: 100 - total flux cleaned = 3.00779e-05 Jy ! Component: 150 - total flux cleaned = 5.45802e-05 Jy ! Component: 200 - total flux cleaned = 0.000102269 Jy ! Component: 250 - total flux cleaned = 0.000114067 Jy ! Component: 300 - total flux cleaned = 0.000136492 Jy ! Component: 350 - total flux cleaned = 0.000102819 Jy ! Component: 400 - total flux cleaned = 8.08721e-05 Jy ! Component: 450 - total flux cleaned = 2.70279e-05 Jy ! Component: 500 - total flux cleaned = 5.9381e-06 Jy ! Component: 550 - total flux cleaned = -3.6013e-05 Jy ! Component: 600 - total flux cleaned = -6.68316e-05 Jy ! Component: 650 - total flux cleaned = -8.71697e-05 Jy ! Component: 700 - total flux cleaned = -0.000117276 Jy ! Component: 750 - total flux cleaned = -0.000156719 Jy ! Component: 800 - total flux cleaned = -0.000166181 Jy ! Component: 850 - total flux cleaned = -0.000185385 Jy ! Component: 900 - total flux cleaned = -0.000194919 Jy ! Component: 950 - total flux cleaned = -0.000213623 Jy ! Component: 1000 - total flux cleaned = -0.000222864 Jy ! Component: 1050 - total flux cleaned = -0.000241177 Jy ! Component: 1100 - total flux cleaned = -0.000232212 Jy ! Component: 1150 - total flux cleaned = -0.000268152 Jy ! Component: 1200 - total flux cleaned = -0.000285996 Jy ! Component: 1250 - total flux cleaned = -0.000312484 Jy ! Component: 1300 - total flux cleaned = -0.000347394 Jy ! Component: 1350 - total flux cleaned = -0.000355903 Jy ! Component: 1400 - total flux cleaned = -0.000372922 Jy ! Component: 1450 - total flux cleaned = -0.000406904 Jy ! Component: 1500 - total flux cleaned = -0.000415275 Jy ! Component: 1550 - total flux cleaned = -0.000423605 Jy ! Component: 1600 - total flux cleaned = -0.000489775 Jy ! Component: 1650 - total flux cleaned = -0.000456976 Jy ! Component: 1700 - total flux cleaned = -0.000489581 Jy ! Component: 1750 - total flux cleaned = -0.000521884 Jy ! Component: 1800 - total flux cleaned = -0.000529982 Jy ! Component: 1850 - total flux cleaned = -0.000553839 Jy ! Component: 1900 - total flux cleaned = -0.000553935 Jy ! Component: 1950 - total flux cleaned = -0.000577479 Jy ! Component: 2000 - total flux cleaned = -0.000569706 Jy ! Component: 2050 - total flux cleaned = -0.000600571 Jy ! Component: 2100 - total flux cleaned = -0.00058532 Jy ! Component: 2150 - total flux cleaned = -0.00060055 Jy ! Component: 2200 - total flux cleaned = -0.000615608 Jy ! Component: 2250 - total flux cleaned = -0.000593173 Jy ! Component: 2300 - total flux cleaned = -0.000637873 Jy ! Component: 2350 - total flux cleaned = -0.000600795 Jy ! Component: 2400 - total flux cleaned = -0.000600822 Jy ! Component: 2450 - total flux cleaned = -0.000630061 Jy ! Component: 2500 - total flux cleaned = -0.00064459 Jy ! Component: 2550 - total flux cleaned = -0.000615824 Jy ! Component: 2600 - total flux cleaned = -0.000601492 Jy ! Component: 2650 - total flux cleaned = -0.000615765 Jy ! Component: 2700 - total flux cleaned = -0.000615777 Jy ! Component: 2750 - total flux cleaned = -0.000587703 Jy ! Component: 2800 - total flux cleaned = -0.000615646 Jy ! Component: 2850 - total flux cleaned = -0.000580968 Jy ! Component: 2900 - total flux cleaned = -0.000580972 Jy ! Component: 2950 - total flux cleaned = -0.000580943 Jy ! Component: 3000 - total flux cleaned = -0.000587746 Jy ! Component: 3050 - total flux cleaned = -0.000580999 Jy ! Component: 3100 - total flux cleaned = -0.000594507 Jy ! Component: 3150 - total flux cleaned = -0.000581066 Jy ! Component: 3200 - total flux cleaned = -0.000607685 Jy ! Component: 3250 - total flux cleaned = -0.000614311 Jy ! Component: 3300 - total flux cleaned = -0.000620905 Jy ! Component: 3350 - total flux cleaned = -0.000620859 Jy ! Component: 3400 - total flux cleaned = -0.000633914 Jy ! Component: 3450 - total flux cleaned = -0.000614454 Jy ! Component: 3500 - total flux cleaned = -0.000608064 Jy ! Component: 3550 - total flux cleaned = -0.000652951 Jy ! Component: 3600 - total flux cleaned = -0.000633846 Jy ! Component: 3650 - total flux cleaned = -0.000646544 Jy ! Component: 3700 - total flux cleaned = -0.000646525 Jy ! Component: 3750 - total flux cleaned = -0.000640228 Jy ! Component: 3800 - total flux cleaned = -0.000658962 Jy ! Component: 3850 - total flux cleaned = -0.000640353 Jy ! Component: 3900 - total flux cleaned = -0.000609428 Jy ! Component: 3950 - total flux cleaned = -0.000646407 Jy ! Component: 4000 - total flux cleaned = -0.000634231 Jy ! Component: 4050 - total flux cleaned = -0.000646489 Jy ! Total flux subtracted in 4096 components = -0.000652559 Jy ! Clean residual min=-0.000326 max=0.000406 Jy/beam ! Clean residual mean=0.000000 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.384594 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 671 components and 0.384594 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0034+2754_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9177 x 1.763 at -2.377 degrees (North through East) ! Clean map min=-0.00058828 max=0.12167 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0034+2754_X_map.fits wmodel /vlbi/uf001/uva//J0034+2754_X_map.mod ! Writing 671 model components to file: /vlbi/uf001/uva//J0034+2754_X_map.mod wobs /vlbi/uf001/uva//J0034+2754_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0034+2754_X_uvs.fits wwins /vlbi/uf001/uva//J0034+2754_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0034+2754_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.121674 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000105088 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259105 0.259105 0.518211 1.03642 2.07284 4.14568 8.29137 16.5827 33.1655 66.331 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.121 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1157.83 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0034+2754_X_dfm.log closed on Sun Jan 13 20:36:54 2019