! Started logfile: /vlbi/uf001/uva//J0030+7037_X_dfm.log on Sun Jan 13 20:36:08 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0030+7037_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0030+7037_X_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.953571 visibilities/baseline/integration-bin. ! Found source: J0030+7037 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 28836 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0030+7037_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.110756Jy sigma=21.862516 ! Fit after self-cal, rms=0.591055Jy sigma=12.080590 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=0.8487 mas, bpa=63.8 degrees ! Estimated noise=0.396785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.301211 Jy ! Component: 100 - total flux cleaned = 0.38319 Jy ! Total flux subtracted in 100 components = 0.38319 Jy ! Clean residual min=-0.016361 max=0.054176 Jy/beam ! Clean residual mean=-0.000010 rms=0.003390 Jy/beam ! Combined flux in latest and established models = 0.383189 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.383189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146461Jy sigma=2.330366 ! Fit after self-cal, rms=0.146265Jy sigma=2.325324 ! Inverting map ! Added new window around map position (-1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520172 Jy ! Component: 100 - total flux cleaned = 0.0815082 Jy ! Total flux subtracted in 100 components = 0.0815082 Jy ! Clean residual min=-0.010674 max=0.022759 Jy/beam ! Clean residual mean=-0.000007 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 0.464698 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.464698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115236Jy sigma=1.725534 ! Fit after self-cal, rms=0.113457Jy sigma=1.677882 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234792 Jy ! Component: 100 - total flux cleaned = 0.0374434 Jy ! Total flux subtracted in 100 components = 0.0374434 Jy ! Clean residual min=-0.008370 max=0.013521 Jy/beam ! Clean residual mean=-0.000006 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.502141 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.502141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104198Jy sigma=1.528492 ! Fit after self-cal, rms=0.103718Jy sigma=1.516012 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011487 Jy ! Component: 100 - total flux cleaned = 0.0183875 Jy ! Total flux subtracted in 100 components = 0.0183875 Jy ! Clean residual min=-0.008171 max=0.009718 Jy/beam ! Clean residual mean=-0.000005 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.520529 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.520529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100752Jy sigma=1.481533 ! Fit after self-cal, rms=0.100608Jy sigma=1.477936 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.054 mas, bmaj=1.082 mas, bpa=78.95 degrees ! Estimated noise=0.231336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951137 Jy ! Component: 100 - total flux cleaned = 0.0143616 Jy ! Component: 150 - total flux cleaned = 0.0171797 Jy ! Component: 200 - total flux cleaned = 0.0178022 Jy ! Total flux subtracted in 200 components = 0.0178022 Jy ! Clean residual min=-0.009804 max=0.009813 Jy/beam ! Clean residual mean=-0.000009 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.538331 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.538331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099014Jy sigma=1.461673 ! Fit after self-cal, rms=0.098899Jy sigma=1.458855 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.054 x 1.082 at 78.95 degrees (North through East) ! Clean map min=-0.0094814 max=0.39083 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.94 KP 1.04 ! LA 1.00 MK 1.02 NL 1.14 OV 0.92 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.94 KP 1.02 ! LA 0.99 MK 1.01 NL 1.14 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.94 KP 1.03 ! LA 1.00 MK 1.04 NL 1.14 OV 0.93 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.93 KP 1.04 ! LA 0.99 MK 1.02 NL 1.14 OV 0.92 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.96 KP 1.03 ! LA 0.99 MK 1.01 NL 1.17 OV 0.93 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.93 KP 1.04 ! LA 1.00 MK 1.00 NL 1.14 OV 0.93 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.95 KP 1.04 ! LA 0.98 MK 1.02 NL 1.14 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.95 KP 1.01 ! LA 0.98 MK 1.01 NL 1.17 OV 0.93 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.96 KP 1.03 ! LA 0.99 MK 1.02 NL 1.14 OV 0.92 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.95 KP 1.03 ! LA 0.99 MK 1.01 NL 1.13 OV 0.93 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.96 KP 1.04 ! LA 1.01 MK 1.02 NL 1.16 OV 0.93 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.96 KP 1.03 ! LA 0.98 MK 1.01 NL 1.16 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Fit before self-cal, rms=0.098899Jy sigma=1.458855 ! Fit after self-cal, rms=0.094676Jy sigma=1.244626 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=1.078 mas, bpa=75.98 degrees ! Estimated noise=0.234017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146644 Jy ! Component: 100 - total flux cleaned = 0.00194249 Jy ! Component: 150 - total flux cleaned = 0.00212791 Jy ! Component: 200 - total flux cleaned = 0.00219894 Jy ! Total flux subtracted in 200 components = 0.00219894 Jy ! Clean residual min=-0.006803 max=0.006815 Jy/beam ! Clean residual mean=-0.000003 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.54053 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.54053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093910Jy sigma=1.238415 ! Fit after self-cal, rms=0.093893Jy sigma=1.237289 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093893Jy sigma=1.237289 ! Fit after self-cal, rms=0.058778Jy sigma=1.091797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.077 mas, bpa=72.93 degrees ! Estimated noise=0.234031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167011 Jy ! Component: 100 - total flux cleaned = -0.00187676 Jy ! Component: 150 - total flux cleaned = -0.00197884 Jy ! Component: 200 - total flux cleaned = -0.0020226 Jy ! Total flux subtracted in 200 components = -0.0020226 Jy ! Clean residual min=-0.002333 max=0.005185 Jy/beam ! Clean residual mean=-0.000001 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.538507 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.538507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058640Jy sigma=1.088839 ! Fit after self-cal, rms=0.058594Jy sigma=1.088340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00530006 Jy ! Component: 100 - total flux cleaned = 0.00827243 Jy ! Component: 150 - total flux cleaned = 0.0101226 Jy ! Component: 200 - total flux cleaned = 0.0107393 Jy ! Total flux subtracted in 200 components = 0.0107393 Jy ! Clean residual min=-0.001732 max=0.002927 Jy/beam ! Clean residual mean=-0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.549246 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.549247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058081Jy sigma=1.078542 ! Fit after self-cal, rms=0.058035Jy sigma=1.077718 ! Inverting map ! Added new window around map position (-3.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208239 Jy ! Component: 100 - total flux cleaned = 0.00256717 Jy ! Component: 150 - total flux cleaned = 0.00292578 Jy ! Component: 200 - total flux cleaned = 0.00319533 Jy ! Total flux subtracted in 200 components = 0.00319533 Jy ! Clean residual min=-0.001507 max=0.001558 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.552442 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 74 components and 0.552442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057890Jy sigma=1.074823 ! Fit after self-cal, rms=0.057882Jy sigma=1.074653 ! Inverting map ! Added new window around map position (-22.2, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696141 Jy ! Component: 100 - total flux cleaned = 0.00105262 Jy ! Component: 150 - total flux cleaned = 0.00113397 Jy ! Component: 200 - total flux cleaned = 0.00124453 Jy ! Total flux subtracted in 200 components = 0.00124453 Jy ! Clean residual min=-0.001443 max=0.001541 Jy/beam ! Clean residual mean=-0.000000 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.553686 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 88 components and 0.553686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057822Jy sigma=1.073352 ! Fit after self-cal, rms=0.057818Jy sigma=1.073293 ! Inverting map ! Added new window around map position (28.6, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134032 Jy ! Component: 100 - total flux cleaned = 0.00197126 Jy ! Component: 150 - total flux cleaned = 0.00231984 Jy ! Component: 200 - total flux cleaned = 0.00245096 Jy ! Total flux subtracted in 200 components = 0.00245096 Jy ! Clean residual min=-0.001398 max=0.001320 Jy/beam ! Clean residual mean=-0.000000 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.556137 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 106 components and 0.556137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057768Jy sigma=1.072196 ! Fit after self-cal, rms=0.057766Jy sigma=1.072158 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057766Jy sigma=1.072158 ! Fit after self-cal, rms=0.057764Jy sigma=1.071038 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.078 mas, bpa=72.29 degrees ! Estimated noise=0.234179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251207 Jy ! Component: 100 - total flux cleaned = 0.000520033 Jy ! Component: 150 - total flux cleaned = 0.000656313 Jy ! Component: 200 - total flux cleaned = 0.000813298 Jy ! Total flux subtracted in 200 components = 0.000813298 Jy ! Clean residual min=-0.001235 max=0.001259 Jy/beam ! Clean residual mean=-0.000000 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.556951 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.556951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057722Jy sigma=1.070142 ! Fit after self-cal, rms=0.057720Jy sigma=1.070101 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179925 Jy ! Component: 100 - total flux cleaned = 0.000293765 Jy ! Component: 150 - total flux cleaned = 0.000400788 Jy ! Component: 200 - total flux cleaned = 0.000500839 Jy ! Total flux subtracted in 200 components = 0.000500839 Jy ! Clean residual min=-0.001186 max=0.001236 Jy/beam ! Clean residual mean=-0.000000 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.557452 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.557451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057698Jy sigma=1.069606 ! Fit after self-cal, rms=0.057697Jy sigma=1.069581 ! Inverting map ! Added new window around map position (32.6, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121029 Jy ! Component: 100 - total flux cleaned = 0.00137018 Jy ! Component: 150 - total flux cleaned = 0.00169532 Jy ! Component: 200 - total flux cleaned = 0.00184664 Jy ! Total flux subtracted in 200 components = 0.00184664 Jy ! Clean residual min=-0.001212 max=0.001256 Jy/beam ! Clean residual mean=-0.000000 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.559298 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 133 components and 0.559298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057661Jy sigma=1.068844 ! Fit after self-cal, rms=0.057659Jy sigma=1.068809 ! Inverting map ! Added new window around map position (-18.2, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083253 Jy ! Component: 100 - total flux cleaned = 0.0010785 Jy ! Component: 150 - total flux cleaned = 0.00127961 Jy ! Component: 200 - total flux cleaned = 0.00130416 Jy ! Total flux subtracted in 200 components = 0.00130416 Jy ! Clean residual min=-0.001172 max=0.001052 Jy/beam ! Clean residual mean=-0.000000 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.560602 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 147 components and 0.560602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057630Jy sigma=1.068215 ! Fit after self-cal, rms=0.057628Jy sigma=1.068191 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057628Jy sigma=1.068191 ! Fit after self-cal, rms=0.057640Jy sigma=1.068046 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.285 mas, bmaj=2.496 mas, bpa=74.72 degrees ! Estimated noise=0.318469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747366 Jy ! Component: 100 - total flux cleaned = 0.0011749 Jy ! Component: 150 - total flux cleaned = 0.00155081 Jy ! Component: 200 - total flux cleaned = 0.0017453 Jy ! Total flux subtracted in 200 components = 0.0017453 Jy ! Clean residual min=-0.001249 max=0.001176 Jy/beam ! Clean residual mean=-0.000000 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.562348 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 160 components and 0.562348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057632Jy sigma=1.067901 ! Fit after self-cal, rms=0.057632Jy sigma=1.067882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223096 Jy ! Component: 100 - total flux cleaned = 0.000332769 Jy ! Component: 150 - total flux cleaned = 0.000391118 Jy ! Component: 200 - total flux cleaned = 0.000405324 Jy ! Total flux subtracted in 200 components = 0.000405324 Jy ! Clean residual min=-0.001249 max=0.001191 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.562753 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 170 components and 0.562753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057628Jy sigma=1.067818 ! Fit after self-cal, rms=0.057628Jy sigma=1.067812 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.078 mas, bpa=72.13 degrees ! Estimated noise=0.234244 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.049 x 1.078 at 72.13 degrees (North through East) ! Clean map min=-0.0011465 max=0.3947 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8381 mas, bmaj=0.8474 mas, bpa=43.01 degrees ! Estimated noise=0.400146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.301994 Jy ! Component: 100 - total flux cleaned = 0.395817 Jy ! Component: 150 - total flux cleaned = 0.44865 Jy ! Component: 200 - total flux cleaned = 0.479199 Jy ! Total flux subtracted in 200 components = 0.479199 Jy ! Clean residual min=-0.004757 max=0.015590 Jy/beam ! Clean residual mean=-0.000003 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.479199 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.479199 Jy ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.078 mas, bpa=72.13 degrees ! Estimated noise=0.234244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248148 Jy ! Component: 100 - total flux cleaned = 0.0381209 Jy ! Component: 150 - total flux cleaned = 0.0467432 Jy ! Component: 200 - total flux cleaned = 0.0530953 Jy ! Total flux subtracted in 200 components = 0.0530953 Jy ! Clean residual min=-0.001825 max=0.003725 Jy/beam ! Clean residual mean=-0.000002 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.532294 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 38 components and 0.532294 Jy ! Inverting map ! Added new window around map position (-1.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489356 Jy ! Component: 100 - total flux cleaned = 0.00870801 Jy ! Component: 150 - total flux cleaned = 0.0117284 Jy ! Component: 200 - total flux cleaned = 0.014167 Jy ! Total flux subtracted in 200 components = 0.014167 Jy ! Clean residual min=-0.001372 max=0.001764 Jy/beam ! Clean residual mean=-0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.546461 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 70 components and 0.546461 Jy ! Inverting map ! Added new window around map position (37.8, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210391 Jy ! Component: 100 - total flux cleaned = 0.0039136 Jy ! Component: 150 - total flux cleaned = 0.00551888 Jy ! Component: 200 - total flux cleaned = 0.00678832 Jy ! Total flux subtracted in 200 components = 0.00678832 Jy ! Clean residual min=-0.001198 max=0.001140 Jy/beam ! Clean residual mean=-0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.553249 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 92 components and 0.553249 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.285 mas, bmaj=2.496 mas, bpa=74.72 degrees ! Estimated noise=0.318469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222242 Jy ! Component: 100 - total flux cleaned = 0.00378462 Jy ! Component: 150 - total flux cleaned = 0.00473869 Jy ! Component: 200 - total flux cleaned = 0.00556977 Jy ! Total flux subtracted in 200 components = 0.00556977 Jy ! Clean residual min=-0.001310 max=0.001379 Jy/beam ! Clean residual mean=-0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.558819 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695634 Jy ! Component: 100 - total flux cleaned = 0.00129693 Jy ! Component: 150 - total flux cleaned = 0.00161893 Jy ! Component: 200 - total flux cleaned = 0.0018632 Jy ! Total flux subtracted in 200 components = 0.0018632 Jy ! Clean residual min=-0.001273 max=0.001256 Jy/beam ! Clean residual mean=-0.000000 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.560682 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 141 components and 0.560682 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.049 mas, bmaj=1.078 mas, bpa=72.13 degrees ! Estimated noise=0.234244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282074 Jy ! Component: 100 - total flux cleaned = 0.000385568 Jy ! Component: 150 - total flux cleaned = 0.00047835 Jy ! Component: 200 - total flux cleaned = 0.000535199 Jy ! Total flux subtracted in 200 components = 0.000535199 Jy ! Clean residual min=-0.001013 max=0.001010 Jy/beam ! Clean residual mean=-0.000000 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.561218 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 165 components and 0.561218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057616Jy sigma=1.067510 ! Fit after self-cal, rms=0.057600Jy sigma=1.067194 wmodel J0030+7037_X_map.mod ! Writing 165 model components to file: J0030+7037_X_map.mod wobs J0030+7037_X_uvs.fits ! Writing UV FITS file: J0030+7037_X_uvs.fits wwins J0030+7037_X_map.win ! wwins: Wrote 10 windows to J0030+7037_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.91669e-05 Jy ! Component: 100 - total flux cleaned = -0.000129443 Jy ! Component: 150 - total flux cleaned = -0.000236788 Jy ! Component: 200 - total flux cleaned = -0.000324237 Jy ! Component: 250 - total flux cleaned = -0.000324485 Jy ! Component: 300 - total flux cleaned = -0.000392212 Jy ! Component: 350 - total flux cleaned = -0.000408983 Jy ! Component: 400 - total flux cleaned = -0.000490684 Jy ! Component: 450 - total flux cleaned = -0.00055489 Jy ! Component: 500 - total flux cleaned = -0.000570618 Jy ! Component: 550 - total flux cleaned = -0.000633496 Jy ! Component: 600 - total flux cleaned = -0.000710879 Jy ! Component: 650 - total flux cleaned = -0.00083278 Jy ! Component: 700 - total flux cleaned = -0.000847419 Jy ! Component: 750 - total flux cleaned = -0.000922178 Jy ! Component: 800 - total flux cleaned = -0.00099609 Jy ! Component: 850 - total flux cleaned = -0.00106941 Jy ! Component: 900 - total flux cleaned = -0.00106938 Jy ! Component: 950 - total flux cleaned = -0.0011702 Jy ! Component: 1000 - total flux cleaned = -0.00117037 Jy ! Component: 1050 - total flux cleaned = -0.00128338 Jy ! Component: 1100 - total flux cleaned = -0.00128321 Jy ! Component: 1150 - total flux cleaned = -0.00132503 Jy ! Component: 1200 - total flux cleaned = -0.00138016 Jy ! Component: 1250 - total flux cleaned = -0.00146218 Jy ! Component: 1300 - total flux cleaned = -0.00151641 Jy ! Component: 1350 - total flux cleaned = -0.0015567 Jy ! Component: 1400 - total flux cleaned = -0.00159671 Jy ! Component: 1450 - total flux cleaned = -0.00168969 Jy ! Component: 1500 - total flux cleaned = -0.00168976 Jy ! Component: 1550 - total flux cleaned = -0.00182034 Jy ! Component: 1600 - total flux cleaned = -0.00191119 Jy ! Component: 1650 - total flux cleaned = -0.00197544 Jy ! Component: 1700 - total flux cleaned = -0.00201386 Jy ! Component: 1750 - total flux cleaned = -0.00205206 Jy ! Component: 1800 - total flux cleaned = -0.00216577 Jy ! Component: 1850 - total flux cleaned = -0.00219097 Jy ! Component: 1900 - total flux cleaned = -0.00225342 Jy ! Component: 1950 - total flux cleaned = -0.00232776 Jy ! Component: 2000 - total flux cleaned = -0.00237714 Jy ! Component: 2050 - total flux cleaned = -0.00242596 Jy ! Component: 2100 - total flux cleaned = -0.00243819 Jy ! Component: 2150 - total flux cleaned = -0.00247439 Jy ! Component: 2200 - total flux cleaned = -0.00257069 Jy ! Component: 2250 - total flux cleaned = -0.00261837 Jy ! Component: 2300 - total flux cleaned = -0.00258278 Jy ! Component: 2350 - total flux cleaned = -0.00265378 Jy ! Component: 2400 - total flux cleaned = -0.00268922 Jy ! Component: 2450 - total flux cleaned = -0.00273597 Jy ! Component: 2500 - total flux cleaned = -0.0027709 Jy ! Component: 2550 - total flux cleaned = -0.00277093 Jy ! Component: 2600 - total flux cleaned = -0.00284001 Jy ! Component: 2650 - total flux cleaned = -0.00289741 Jy ! Component: 2700 - total flux cleaned = -0.00286309 Jy ! Component: 2750 - total flux cleaned = -0.00285173 Jy ! Component: 2800 - total flux cleaned = -0.00286316 Jy ! Component: 2850 - total flux cleaned = -0.00287444 Jy ! Component: 2900 - total flux cleaned = -0.00284095 Jy ! Component: 2950 - total flux cleaned = -0.00288542 Jy ! Component: 3000 - total flux cleaned = -0.00291867 Jy ! Component: 3050 - total flux cleaned = -0.0028965 Jy ! Component: 3100 - total flux cleaned = -0.00292933 Jy ! Component: 3150 - total flux cleaned = -0.00291838 Jy ! Component: 3200 - total flux cleaned = -0.00294004 Jy ! Component: 3250 - total flux cleaned = -0.00290772 Jy ! Component: 3300 - total flux cleaned = -0.00290764 Jy ! Component: 3350 - total flux cleaned = -0.0028863 Jy ! Component: 3400 - total flux cleaned = -0.00290754 Jy ! Component: 3450 - total flux cleaned = -0.00292876 Jy ! Component: 3500 - total flux cleaned = -0.00289714 Jy ! Component: 3550 - total flux cleaned = -0.00290765 Jy ! Component: 3600 - total flux cleaned = -0.00288672 Jy ! Component: 3650 - total flux cleaned = -0.00285551 Jy ! Component: 3700 - total flux cleaned = -0.00290748 Jy ! Component: 3750 - total flux cleaned = -0.00282495 Jy ! Component: 3800 - total flux cleaned = -0.00284544 Jy ! Component: 3850 - total flux cleaned = -0.00282499 Jy ! Component: 3900 - total flux cleaned = -0.00284534 Jy ! Component: 3950 - total flux cleaned = -0.00286566 Jy ! Component: 4000 - total flux cleaned = -0.00281509 Jy ! Component: 4050 - total flux cleaned = -0.00281507 Jy ! Total flux subtracted in 4096 components = -0.00281507 Jy ! Clean residual min=-0.000511 max=0.000545 Jy/beam ! Clean residual mean=0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.558403 Jy keep ! Adding 359 model components to the UV plane model. ! The established model now contains 524 components and 0.558402 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0030+7037_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.049 x 1.078 at 72.13 degrees (North through East) ! Clean map min=-0.00093997 max=0.39505 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0030+7037_X_map.fits wmodel /vlbi/uf001/uva//J0030+7037_X_map.mod ! Writing 524 model components to file: /vlbi/uf001/uva//J0030+7037_X_map.mod wobs /vlbi/uf001/uva//J0030+7037_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0030+7037_X_uvs.fits wwins /vlbi/uf001/uva//J0030+7037_X_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uva//J0030+7037_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.395046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00016988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.129007 0.129007 0.258015 0.51603 1.03206 2.06412 4.12824 8.25648 16.513 33.0259 66.0518 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.395 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2325.45 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0030+7037_X_dfm.log closed on Sun Jan 13 20:36:15 2019