! Started logfile: /vlbi/uf001/uva//J0029-0113_X_dfm.log on Sun Jan 13 20:35:56 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0029-0113_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0029-0113_X_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.883796 visibilities/baseline/integration-bin. ! Found source: J0029-0113 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 22908 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0029-0113_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013370Jy sigma=23.225686 ! Fit after self-cal, rms=0.884103Jy sigma=20.244116 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7322 mas, bmaj=1.771 mas, bpa=4.229 degrees ! Estimated noise=0.39747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840758 Jy ! Component: 100 - total flux cleaned = 0.110198 Jy ! Total flux subtracted in 100 components = 0.110198 Jy ! Clean residual min=-0.005638 max=0.012117 Jy/beam ! Clean residual mean=-0.000003 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.110198 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.110198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065269Jy sigma=1.422574 ! Fit after self-cal, rms=0.065206Jy sigma=1.420767 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141817 Jy ! Component: 100 - total flux cleaned = 0.0220922 Jy ! Total flux subtracted in 100 components = 0.0220922 Jy ! Clean residual min=-0.004289 max=0.008227 Jy/beam ! Clean residual mean=-0.000001 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.13229 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 12 components and 0.13229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060713Jy sigma=1.313496 ! Fit after self-cal, rms=0.060688Jy sigma=1.312576 ! Inverting map ! Added new window around map position (1.2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813241 Jy ! Component: 100 - total flux cleaned = 0.0126006 Jy ! Total flux subtracted in 100 components = 0.0126006 Jy ! Clean residual min=-0.003815 max=0.006475 Jy/beam ! Clean residual mean=0.000000 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.144891 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 18 components and 0.144891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059211Jy sigma=1.278286 ! Fit after self-cal, rms=0.059161Jy sigma=1.276900 ! Inverting map ! Added new window around map position (3, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608504 Jy ! Component: 100 - total flux cleaned = 0.00894564 Jy ! Total flux subtracted in 100 components = 0.00894564 Jy ! Clean residual min=-0.003518 max=0.004934 Jy/beam ! Clean residual mean=0.000000 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.153836 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.153836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058311Jy sigma=1.258502 ! Fit after self-cal, rms=0.058248Jy sigma=1.256601 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=2.109 mas, bpa=4.453 degrees ! Estimated noise=0.206421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458324 Jy ! Component: 100 - total flux cleaned = 0.00701798 Jy ! Component: 150 - total flux cleaned = 0.0086891 Jy ! Component: 200 - total flux cleaned = 0.00936391 Jy ! Total flux subtracted in 200 components = 0.00936391 Jy ! Clean residual min=-0.003844 max=0.004531 Jy/beam ! Clean residual mean=-0.000000 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.1632 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.1632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057845Jy sigma=1.248402 ! Fit after self-cal, rms=0.057790Jy sigma=1.246860 ! Inverting map ! Added new window around map position (0.4, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032765 Jy ! Component: 100 - total flux cleaned = 0.00436278 Jy ! Component: 150 - total flux cleaned = 0.00466936 Jy ! Component: 200 - total flux cleaned = 0.00480609 Jy ! Total flux subtracted in 200 components = 0.00480609 Jy ! Clean residual min=-0.003407 max=0.003840 Jy/beam ! Clean residual mean=0.000000 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.168006 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.168006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057440Jy sigma=1.240064 ! Fit after self-cal, rms=0.057419Jy sigma=1.239403 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9248 x 2.109 at 4.453 degrees (North through East) ! Clean map min=-0.0028239 max=0.11327 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.91 KP 1.01 ! LA 1.01 MK 1.12 NL 1.02 OV 0.98 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 0.89 KP 1.01 ! LA 0.98 MK 1.05 NL 1.07 OV 0.96 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.92 KP 1.03 ! LA 1.04 MK 1.05 NL 1.02 OV 0.96 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.96 KP 1.02 ! LA 1.02 MK 1.05 NL 1.03 OV 0.97 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.92 KP 1.01 ! LA 1.00 MK 1.07 NL 1.07 OV 0.95 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.93 KP 1.01 ! LA 1.01 MK 1.00 NL 1.05 OV 0.99 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 0.92 KP 1.01 ! LA 0.99 MK 1.05 NL 1.02 OV 0.98 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.93 KP 1.02 ! LA 1.02 MK 1.08 NL 1.04 OV 0.97 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.88 KP 1.01 ! LA 1.04 MK 1.10 NL 1.06 OV 0.98 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.90 KP 1.02 ! LA 1.03 MK 1.02 NL 1.02 OV 0.97 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.96 KP 1.03 ! LA 1.01 MK 0.96 NL 1.09 OV 0.96 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.87 KP 1.01 ! LA 1.04 MK 0.95 NL 1.04 OV 0.98 ! PT 0.94 SC 0.97 ! ! ! Fit before self-cal, rms=0.057419Jy sigma=1.239403 ! Fit after self-cal, rms=0.055490Jy sigma=1.226819 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9182 mas, bmaj=2.116 mas, bpa=4.777 degrees ! Estimated noise=0.205372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283744 Jy ! Component: 100 - total flux cleaned = 0.00430444 Jy ! Component: 150 - total flux cleaned = 0.00495836 Jy ! Component: 200 - total flux cleaned = 0.0052982 Jy ! Total flux subtracted in 200 components = 0.0052982 Jy ! Clean residual min=-0.001557 max=0.001639 Jy/beam ! Clean residual mean=0.000000 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.173304 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.173305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055303Jy sigma=1.222523 ! Fit after self-cal, rms=0.055291Jy sigma=1.222261 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055291Jy sigma=1.222261 ! Fit after self-cal, rms=0.055382Jy sigma=1.219449 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9163 mas, bmaj=2.114 mas, bpa=4.77 degrees ! Estimated noise=0.205524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859491 Jy ! Component: 100 - total flux cleaned = 0.00118917 Jy ! Component: 150 - total flux cleaned = 0.00140043 Jy ! Component: 200 - total flux cleaned = 0.00159182 Jy ! Total flux subtracted in 200 components = 0.00159182 Jy ! Clean residual min=-0.001207 max=0.001367 Jy/beam ! Clean residual mean=0.000000 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.174896 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.174896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055329Jy sigma=1.218235 ! Fit after self-cal, rms=0.055334Jy sigma=1.218170 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.8, 33.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00098368 Jy ! Component: 100 - total flux cleaned = 0.0011899 Jy ! Component: 150 - total flux cleaned = 0.00137457 Jy ! Component: 200 - total flux cleaned = 0.00154309 Jy ! Total flux subtracted in 200 components = 0.00154309 Jy ! Clean residual min=-0.001237 max=0.001282 Jy/beam ! Clean residual mean=-0.000000 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.176439 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.176439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055298Jy sigma=1.217303 ! Fit after self-cal, rms=0.055296Jy sigma=1.217278 ! Inverting map ! Added new window around map position (26.2, -38.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729641 Jy ! Component: 100 - total flux cleaned = 0.000753913 Jy ! Component: 150 - total flux cleaned = 0.000821546 Jy ! Component: 200 - total flux cleaned = 0.000905028 Jy ! Total flux subtracted in 200 components = 0.000905028 Jy ! Clean residual min=-0.001144 max=0.001258 Jy/beam ! Clean residual mean=-0.000000 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.177344 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.177344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055268Jy sigma=1.216627 ! Fit after self-cal, rms=0.055266Jy sigma=1.216582 ! Inverting map ! Added new window around map position (39.4, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961645 Jy ! Component: 100 - total flux cleaned = 0.00106841 Jy ! Component: 150 - total flux cleaned = 0.0011579 Jy ! Component: 200 - total flux cleaned = 0.00125957 Jy ! Total flux subtracted in 200 components = 0.00125957 Jy ! Clean residual min=-0.001063 max=0.001007 Jy/beam ! Clean residual mean=-0.000000 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.178604 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 0.178604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055241Jy sigma=1.215938 ! Fit after self-cal, rms=0.055239Jy sigma=1.215922 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055239Jy sigma=1.215922 ! Fit after self-cal, rms=0.055204Jy sigma=1.215774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9158 mas, bmaj=2.114 mas, bpa=4.762 degrees ! Estimated noise=0.205389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141333 Jy ! Component: 100 - total flux cleaned = 0.000281427 Jy ! Component: 150 - total flux cleaned = 0.000337272 Jy ! Component: 200 - total flux cleaned = 0.000443679 Jy ! Total flux subtracted in 200 components = 0.000443679 Jy ! Clean residual min=-0.000978 max=0.001003 Jy/beam ! Clean residual mean=-0.000000 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.179048 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 146 components and 0.179048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055192Jy sigma=1.215488 ! Fit after self-cal, rms=0.055193Jy sigma=1.215479 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813936 Jy ! Component: 100 - total flux cleaned = 0.00091769 Jy ! Component: 150 - total flux cleaned = 0.00108264 Jy ! Component: 200 - total flux cleaned = 0.0012718 Jy ! Total flux subtracted in 200 components = 0.0012718 Jy ! Clean residual min=-0.000957 max=0.000854 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.180319 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 160 components and 0.180319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055175Jy sigma=1.215063 ! Fit after self-cal, rms=0.055175Jy sigma=1.215046 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055175Jy sigma=1.215046 ! Fit after self-cal, rms=0.055151Jy sigma=1.215023 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=3.436 mas, bpa=0.7066 degrees ! Estimated noise=0.259757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635123 Jy ! Component: 100 - total flux cleaned = 0.00105824 Jy ! Component: 150 - total flux cleaned = 0.00130686 Jy ! Component: 200 - total flux cleaned = 0.0014765 Jy ! Total flux subtracted in 200 components = 0.0014765 Jy ! Clean residual min=-0.000844 max=0.000930 Jy/beam ! Clean residual mean=0.000000 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.181796 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 190 components and 0.181796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055145Jy sigma=1.214888 ! Fit after self-cal, rms=0.055144Jy sigma=1.214879 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238993 Jy ! Component: 100 - total flux cleaned = 0.000377914 Jy ! Component: 150 - total flux cleaned = 0.000495232 Jy ! Component: 200 - total flux cleaned = 0.000615665 Jy ! Total flux subtracted in 200 components = 0.000615665 Jy ! Clean residual min=-0.000810 max=0.000931 Jy/beam ! Clean residual mean=0.000000 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.182412 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 203 components and 0.182412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055141Jy sigma=1.214808 ! Fit after self-cal, rms=0.055140Jy sigma=1.214805 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.916 mas, bmaj=2.114 mas, bpa=4.763 degrees ! Estimated noise=0.205311 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.916 x 2.114 at 4.763 degrees (North through East) ! Clean map min=-0.0010061 max=0.11295 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7272 mas, bmaj=1.779 mas, bpa=4.514 degrees ! Estimated noise=0.392274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0831426 Jy ! Component: 100 - total flux cleaned = 0.110316 Jy ! Component: 150 - total flux cleaned = 0.12571 Jy ! Component: 200 - total flux cleaned = 0.136087 Jy ! Total flux subtracted in 200 components = 0.136087 Jy ! Clean residual min=-0.003076 max=0.005776 Jy/beam ! Clean residual mean=-0.000001 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.136087 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.136087 Jy ! Inverting map and beam ! Estimated beam: bmin=0.916 mas, bmaj=2.114 mas, bpa=4.763 degrees ! Estimated noise=0.205311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110138 Jy ! Component: 100 - total flux cleaned = 0.0180306 Jy ! Component: 150 - total flux cleaned = 0.0227782 Jy ! Component: 200 - total flux cleaned = 0.0263627 Jy ! Total flux subtracted in 200 components = 0.0263627 Jy ! Clean residual min=-0.001789 max=0.002202 Jy/beam ! Clean residual mean=-0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.16245 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.16245 Jy ! Inverting map ! Added new window around map position (-4.2, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279858 Jy ! Component: 100 - total flux cleaned = 0.00503422 Jy ! Component: 150 - total flux cleaned = 0.00690825 Jy ! Component: 200 - total flux cleaned = 0.00853901 Jy ! Total flux subtracted in 200 components = 0.00853901 Jy ! Clean residual min=-0.001327 max=0.001431 Jy/beam ! Clean residual mean=-0.000000 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.170989 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 68 components and 0.170989 Jy ! Inverting map ! Added new window around map position (-24.6, 42.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152268 Jy ! Component: 100 - total flux cleaned = 0.00279953 Jy ! Component: 150 - total flux cleaned = 0.003757 Jy ! Component: 200 - total flux cleaned = 0.00465664 Jy ! Total flux subtracted in 200 components = 0.00465664 Jy ! Clean residual min=-0.001137 max=0.001164 Jy/beam ! Clean residual mean=-0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.175646 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 89 components and 0.175646 Jy ! Inverting map ! Added new window around map position (20.8, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000913048 Jy ! Component: 100 - total flux cleaned = 0.00157651 Jy ! Component: 150 - total flux cleaned = 0.00208874 Jy ! Component: 200 - total flux cleaned = 0.00250425 Jy ! Total flux subtracted in 200 components = 0.00250425 Jy ! Clean residual min=-0.000953 max=0.000923 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.17815 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 113 components and 0.17815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=3.436 mas, bpa=0.7066 degrees ! Estimated noise=0.259757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101408 Jy ! Component: 100 - total flux cleaned = 0.0016446 Jy ! Component: 150 - total flux cleaned = 0.00199751 Jy ! Component: 200 - total flux cleaned = 0.00216628 Jy ! Total flux subtracted in 200 components = 0.00216628 Jy ! Clean residual min=-0.000907 max=0.001125 Jy/beam ! Clean residual mean=-0.000000 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.180316 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50.2, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777327 Jy ! Component: 100 - total flux cleaned = 0.00112608 Jy ! Component: 150 - total flux cleaned = 0.00137549 Jy ! Component: 200 - total flux cleaned = 0.00154647 Jy ! Total flux subtracted in 200 components = 0.00154647 Jy ! Clean residual min=-0.000780 max=0.000837 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.181863 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 176 components and 0.181863 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.916 mas, bmaj=2.114 mas, bpa=4.763 degrees ! Estimated noise=0.205311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155378 Jy ! Component: 100 - total flux cleaned = -0.000180929 Jy ! Component: 150 - total flux cleaned = -0.000160341 Jy ! Component: 200 - total flux cleaned = -1.21234e-05 Jy ! Total flux subtracted in 200 components = -1.21234e-05 Jy ! Clean residual min=-0.000735 max=0.000838 Jy/beam ! Clean residual mean=-0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.18185 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 204 components and 0.18185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055131Jy sigma=1.214430 ! Fit after self-cal, rms=0.055127Jy sigma=1.214335 wmodel J0029-0113_X_map.mod ! Writing 204 model components to file: J0029-0113_X_map.mod wobs J0029-0113_X_uvs.fits ! Writing UV FITS file: J0029-0113_X_uvs.fits wwins J0029-0113_X_map.win ! wwins: Wrote 14 windows to J0029-0113_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381244 Jy ! Component: 100 - total flux cleaned = 0.000608493 Jy ! Component: 150 - total flux cleaned = 0.000730503 Jy ! Component: 200 - total flux cleaned = 0.000848167 Jy ! Component: 250 - total flux cleaned = 0.000949618 Jy ! Component: 300 - total flux cleaned = 0.00106032 Jy ! Component: 350 - total flux cleaned = 0.00119181 Jy ! Component: 400 - total flux cleaned = 0.00127373 Jy ! Component: 450 - total flux cleaned = 0.00137679 Jy ! Component: 500 - total flux cleaned = 0.00146619 Jy ! Component: 550 - total flux cleaned = 0.00148825 Jy ! Component: 600 - total flux cleaned = 0.00156358 Jy ! Component: 650 - total flux cleaned = 0.00159524 Jy ! Component: 700 - total flux cleaned = 0.00165789 Jy ! Component: 750 - total flux cleaned = 0.00167852 Jy ! Component: 800 - total flux cleaned = 0.00170898 Jy ! Component: 850 - total flux cleaned = 0.00173923 Jy ! Component: 900 - total flux cleaned = 0.00177894 Jy ! Component: 950 - total flux cleaned = 0.00182767 Jy ! Component: 1000 - total flux cleaned = 0.00183726 Jy ! Component: 1050 - total flux cleaned = 0.00186592 Jy ! Component: 1100 - total flux cleaned = 0.00191307 Jy ! Component: 1150 - total flux cleaned = 0.00190373 Jy ! Component: 1200 - total flux cleaned = 0.00194088 Jy ! Component: 1250 - total flux cleaned = 0.00197742 Jy ! Component: 1300 - total flux cleaned = 0.00201363 Jy ! Component: 1350 - total flux cleaned = 0.0020317 Jy ! Component: 1400 - total flux cleaned = 0.00206716 Jy ! Component: 1450 - total flux cleaned = 0.00208465 Jy ! Component: 1500 - total flux cleaned = 0.00211933 Jy ! Component: 1550 - total flux cleaned = 0.00214515 Jy ! Component: 1600 - total flux cleaned = 0.00217918 Jy ! Component: 1650 - total flux cleaned = 0.00218757 Jy ! Component: 1700 - total flux cleaned = 0.00219595 Jy ! Component: 1750 - total flux cleaned = 0.00221257 Jy ! Component: 1800 - total flux cleaned = 0.0022536 Jy ! Component: 1850 - total flux cleaned = 0.00228605 Jy ! Component: 1900 - total flux cleaned = 0.00232631 Jy ! Component: 1950 - total flux cleaned = 0.0023263 Jy ! Component: 2000 - total flux cleaned = 0.00236598 Jy ! Component: 2050 - total flux cleaned = 0.00237395 Jy ! Component: 2100 - total flux cleaned = 0.00240506 Jy ! Component: 2150 - total flux cleaned = 0.00243593 Jy ! Component: 2200 - total flux cleaned = 0.00246659 Jy ! Component: 2250 - total flux cleaned = 0.00248934 Jy ! Component: 2300 - total flux cleaned = 0.00251943 Jy ! Component: 2350 - total flux cleaned = 0.0025194 Jy ! Component: 2400 - total flux cleaned = 0.0025269 Jy ! Component: 2450 - total flux cleaned = 0.00259329 Jy ! Component: 2500 - total flux cleaned = 0.00262253 Jy ! Component: 2550 - total flux cleaned = 0.00265157 Jy ! Component: 2600 - total flux cleaned = 0.00268752 Jy ! Component: 2650 - total flux cleaned = 0.00270887 Jy ! Component: 2700 - total flux cleaned = 0.00275849 Jy ! Component: 2750 - total flux cleaned = 0.0027726 Jy ! Component: 2800 - total flux cleaned = 0.00280763 Jy ! Component: 2850 - total flux cleaned = 0.00283538 Jy ! Component: 2900 - total flux cleaned = 0.00286293 Jy ! Component: 2950 - total flux cleaned = 0.00288343 Jy ! Component: 3000 - total flux cleaned = 0.00292428 Jy ! Component: 3050 - total flux cleaned = 0.00294459 Jy ! Component: 3100 - total flux cleaned = 0.00300502 Jy ! Component: 3150 - total flux cleaned = 0.00301833 Jy ! Component: 3200 - total flux cleaned = 0.00303161 Jy ! Component: 3250 - total flux cleaned = 0.00307105 Jy ! Component: 3300 - total flux cleaned = 0.00311021 Jy ! Component: 3350 - total flux cleaned = 0.0031361 Jy ! Component: 3400 - total flux cleaned = 0.00314897 Jy ! Component: 3450 - total flux cleaned = 0.00316817 Jy ! Component: 3500 - total flux cleaned = 0.00316822 Jy ! Component: 3550 - total flux cleaned = 0.00319361 Jy ! Component: 3600 - total flux cleaned = 0.00321869 Jy ! Component: 3650 - total flux cleaned = 0.00323743 Jy ! Component: 3700 - total flux cleaned = 0.00324368 Jy ! Component: 3750 - total flux cleaned = 0.003293 Jy ! Component: 3800 - total flux cleaned = 0.00333593 Jy ! Component: 3850 - total flux cleaned = 0.0033603 Jy ! Component: 3900 - total flux cleaned = 0.00337236 Jy ! Component: 3950 - total flux cleaned = 0.00339041 Jy ! Component: 4000 - total flux cleaned = 0.00339039 Jy ! Component: 4050 - total flux cleaned = 0.00340824 Jy ! Total flux subtracted in 4096 components = 0.00342605 Jy ! Clean residual min=-0.000371 max=0.000412 Jy/beam ! Clean residual mean=-0.000000 rms=0.000102 Jy/beam ! Combined flux in latest and established models = 0.185276 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 482 components and 0.185277 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0029-0113_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.916 x 2.114 at 4.763 degrees (North through East) ! Clean map min=-0.00064541 max=0.11278 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0029-0113_X_map.fits wmodel /vlbi/uf001/uva//J0029-0113_X_map.mod ! Writing 482 model components to file: /vlbi/uf001/uva//J0029-0113_X_map.mod wobs /vlbi/uf001/uva//J0029-0113_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0029-0113_X_uvs.fits wwins /vlbi/uf001/uva//J0029-0113_X_map.win ! wwins: Wrote 15 windows to /vlbi/uf001/uva//J0029-0113_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.112777 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00010141 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.269762 0.269762 0.539525 1.07905 2.1581 4.3162 8.6324 17.2648 34.5296 69.0592 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.112 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1112.09 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0029-0113_X_dfm.log closed on Sun Jan 13 20:36:03 2019