! Started logfile: /vlbi/uf001/uva//J0029+0509_S_dfm.log on Sun Jan 13 20:35:28 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0029+0509_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0029+0509_S_uva.fits
! AN table 1: 92 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.536836 visibilities/baseline/integration-bin.
! Found source: J0029+0509
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5334 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0029+0509_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 380 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 380 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 380 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018109Jy  sigma=20.992101
! Fit after  self-cal, rms=0.793804Jy  sigma=16.507065
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.75 mas, bmaj=6.456 mas, bpa=-2.977 degrees
! Estimated noise=0.621068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157677 Jy
! Component: 100  -  total flux cleaned = 0.206565 Jy
! Total flux subtracted in 100 components = 0.206565 Jy
! Clean residual min=-0.018843 max=0.064560 Jy/beam
! Clean residual mean=0.000015 rms=0.005922 Jy/beam
! Combined flux in latest and established models = 0.206565 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.206565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121897Jy  sigma=2.459279
! Fit after  self-cal, rms=0.121859Jy  sigma=2.458155
! Inverting map 
! Added new window around map position (-33, 53.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0537494 Jy
! Component: 100  -  total flux cleaned = 0.0818592 Jy
! Total flux subtracted in 100 components = 0.0818592 Jy
! Clean residual min=-0.011528 max=0.016643 Jy/beam
! Clean residual mean=0.000009 rms=0.003555 Jy/beam
! Combined flux in latest and established models = 0.288424 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 0.288424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091476Jy  sigma=1.827908
! Fit after  self-cal, rms=0.089281Jy  sigma=1.787051
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235074 Jy
! Component: 100  -  total flux cleaned = 0.0407659 Jy
! Total flux subtracted in 100 components = 0.0407659 Jy
! Clean residual min=-0.009522 max=0.012033 Jy/beam
! Clean residual mean=0.000011 rms=0.002644 Jy/beam
! Combined flux in latest and established models = 0.32919 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 50 components and 0.32919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080359Jy  sigma=1.597005
! Fit after  self-cal, rms=0.080105Jy  sigma=1.592624
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.196 mas, bmaj=7.059 mas, bpa=-2.029 degrees
! Estimated noise=0.497396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192322 Jy
! Component: 100  -  total flux cleaned = 0.0332805 Jy
! Component: 150  -  total flux cleaned = 0.0441812 Jy
! Component: 200  -  total flux cleaned = 0.0527086 Jy
! Total flux subtracted in 200 components = 0.0527086 Jy
! Clean residual min=-0.008602 max=0.012011 Jy/beam
! Clean residual mean=-0.000002 rms=0.002497 Jy/beam
! Combined flux in latest and established models = 0.381899 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 82 components and 0.381898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073518Jy  sigma=1.450460
! Fit after  self-cal, rms=0.073337Jy  sigma=1.446780
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.196 x 7.059 at -2.029 degrees (North through East)
! Clean map  min=-0.008314  max=0.21532 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.00     KP        0.98     LA        0.91     
!   MK        1.04     NL        1.05     OV        0.94     PT        0.96     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.32     HN        1.01     KP        0.99     LA        0.94     
!   MK        1.06     NL        1.04     OV        0.79     PT        0.94     
!   SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        1.01     KP        0.99     LA        0.92     
!   MK        1.06     NL        1.05     OV        0.93     PT        0.94     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.073337Jy  sigma=1.446780
! Fit after  self-cal, rms=0.068304Jy  sigma=1.315479
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.225 mas, bmaj=7.175 mas, bpa=-1.147 degrees
! Estimated noise=0.484231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-28.5, 47).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00847723 Jy
! Component: 100  -  total flux cleaned = 0.0134967 Jy
! Component: 150  -  total flux cleaned = 0.0161339 Jy
! Component: 200  -  total flux cleaned = 0.0174075 Jy
! Total flux subtracted in 200 components = 0.0174075 Jy
! Clean residual min=-0.005474 max=0.005281 Jy/beam
! Clean residual mean=0.000009 rms=0.001400 Jy/beam
! Combined flux in latest and established models = 0.399306 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 108 components and 0.399306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066958Jy  sigma=1.287653
! Fit after  self-cal, rms=0.066993Jy  sigma=1.285352
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066993Jy  sigma=1.285352
! Fit after  self-cal, rms=0.065713Jy  sigma=1.228123
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.212 mas, bmaj=7.164 mas, bpa=-1.173 degrees
! Estimated noise=0.484868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035684 Jy
! Component: 100  -  total flux cleaned = 0.00528526 Jy
! Component: 150  -  total flux cleaned = 0.00618548 Jy
! Component: 200  -  total flux cleaned = 0.006705 Jy
! Total flux subtracted in 200 components = 0.006705 Jy
! Clean residual min=-0.003007 max=0.002990 Jy/beam
! Clean residual mean=0.000001 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.406011 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 128 components and 0.406011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065449Jy  sigma=1.222415
! Fit after  self-cal, rms=0.065484Jy  sigma=1.221944
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000343188 Jy
! Component: 100  -  total flux cleaned = 0.000625683 Jy
! Component: 150  -  total flux cleaned = 0.000781716 Jy
! Component: 200  -  total flux cleaned = 0.000926785 Jy
! Total flux subtracted in 200 components = 0.000926785 Jy
! Clean residual min=-0.002912 max=0.002761 Jy/beam
! Clean residual mean=0.000001 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.406938 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 135 components and 0.406938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065393Jy  sigma=1.220143
! Fit after  self-cal, rms=0.065391Jy  sigma=1.220071
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065391Jy  sigma=1.220071
! Fit after  self-cal, rms=0.065740Jy  sigma=1.219158
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.203 mas, bmaj=7.152 mas, bpa=-1.177 degrees
! Estimated noise=0.484042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014063 Jy
! Component: 100  -  total flux cleaned = 0.002015 Jy
! Component: 150  -  total flux cleaned = 0.00233249 Jy
! Component: 200  -  total flux cleaned = 0.00258448 Jy
! Total flux subtracted in 200 components = 0.00258448 Jy
! Clean residual min=-0.002744 max=0.002762 Jy/beam
! Clean residual mean=-0.000000 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.409522 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 143 components and 0.409522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065668Jy  sigma=1.217616
! Fit after  self-cal, rms=0.065672Jy  sigma=1.217571
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15, -103.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182428 Jy
! Component: 100  -  total flux cleaned = 0.00222401 Jy
! Component: 150  -  total flux cleaned = 0.00252509 Jy
! Component: 200  -  total flux cleaned = 0.00264039 Jy
! Total flux subtracted in 200 components = 0.00264039 Jy
! Clean residual min=-0.002536 max=0.002538 Jy/beam
! Clean residual mean=-0.000001 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.412163 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 163 components and 0.412163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065578Jy  sigma=1.215367
! Fit after  self-cal, rms=0.065570Jy  sigma=1.215271
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065570Jy  sigma=1.215271
! Fit after  self-cal, rms=0.065641Jy  sigma=1.215017
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.022 mas, bmaj=11.33 mas, bpa=-0.01109 degrees
! Estimated noise=0.62751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163083 Jy
! Component: 100  -  total flux cleaned = 0.00255399 Jy
! Component: 150  -  total flux cleaned = 0.00311138 Jy
! Component: 200  -  total flux cleaned = 0.00348287 Jy
! Total flux subtracted in 200 components = 0.00348287 Jy
! Clean residual min=-0.002852 max=0.002828 Jy/beam
! Clean residual mean=-0.000006 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.415645 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 185 components and 0.415645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065629Jy  sigma=1.214910
! Fit after  self-cal, rms=0.065625Jy  sigma=1.214837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028176 Jy
! Component: 100  -  total flux cleaned = 0.000407847 Jy
! Component: 150  -  total flux cleaned = 0.00048584 Jy
! Component: 200  -  total flux cleaned = 0.000593204 Jy
! Total flux subtracted in 200 components = 0.000593204 Jy
! Clean residual min=-0.002809 max=0.002764 Jy/beam
! Clean residual mean=-0.000006 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.416239 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 194 components and 0.416239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065627Jy  sigma=1.214854
! Fit after  self-cal, rms=0.065625Jy  sigma=1.214836
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.199 mas, bmaj=7.144 mas, bpa=-1.171 degrees
! Estimated noise=0.483735 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.199 x 7.144 at -1.171 degrees (North through East)
! Clean map  min=-0.0023156  max=0.21041 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.752 mas, bmaj=6.507 mas, bpa=-2.011 degrees
! Estimated noise=0.604984 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155478 Jy
! Component: 100  -  total flux cleaned = 0.221028 Jy
! Component: 150  -  total flux cleaned = 0.262297 Jy
! Component: 200  -  total flux cleaned = 0.290692 Jy
! Total flux subtracted in 200 components = 0.290692 Jy
! Clean residual min=-0.009216 max=0.016077 Jy/beam
! Clean residual mean=0.000002 rms=0.002693 Jy/beam
! Combined flux in latest and established models = 0.290692 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.290692 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.199 mas, bmaj=7.144 mas, bpa=-1.171 degrees
! Estimated noise=0.483735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0269274 Jy
! Component: 100  -  total flux cleaned = 0.0464089 Jy
! Component: 150  -  total flux cleaned = 0.0610575 Jy
! Component: 200  -  total flux cleaned = 0.0722308 Jy
! Total flux subtracted in 200 components = 0.0722308 Jy
! Clean residual min=-0.004677 max=0.006541 Jy/beam
! Clean residual mean=-0.000011 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.362922 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 70 components and 0.362922 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00871784 Jy
! Component: 100  -  total flux cleaned = 0.0155707 Jy
! Component: 150  -  total flux cleaned = 0.0210301 Jy
! Component: 200  -  total flux cleaned = 0.0254778 Jy
! Total flux subtracted in 200 components = 0.0254778 Jy
! Clean residual min=-0.003446 max=0.003158 Jy/beam
! Clean residual mean=-0.000005 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.3884 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 105 components and 0.3884 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.022 mas, bmaj=11.33 mas, bpa=-0.01109 degrees
! Estimated noise=0.62751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00632048 Jy
! Component: 100  -  total flux cleaned = 0.0106602 Jy
! Component: 150  -  total flux cleaned = 0.0138837 Jy
! Component: 200  -  total flux cleaned = 0.0164251 Jy
! Total flux subtracted in 200 components = 0.0164251 Jy
! Clean residual min=-0.003103 max=0.002951 Jy/beam
! Clean residual mean=-0.000008 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.404825 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206337 Jy
! Component: 100  -  total flux cleaned = 0.00374821 Jy
! Component: 150  -  total flux cleaned = 0.00513033 Jy
! Component: 200  -  total flux cleaned = 0.00627927 Jy
! Total flux subtracted in 200 components = 0.00627927 Jy
! Clean residual min=-0.002890 max=0.002684 Jy/beam
! Clean residual mean=-0.000009 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.411105 Jy
! Adding 115 model components to the UV plane model.
! The established model now contains 204 components and 0.411105 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.199 mas, bmaj=7.144 mas, bpa=-1.171 degrees
! Estimated noise=0.483735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158715 Jy
! Component: 100  -  total flux cleaned = 0.00193817 Jy
! Component: 150  -  total flux cleaned = 0.0022377 Jy
! Component: 200  -  total flux cleaned = 0.00241966 Jy
! Total flux subtracted in 200 components = 0.00241966 Jy
! Clean residual min=-0.002530 max=0.002422 Jy/beam
! Clean residual mean=-0.000003 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.413524 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 224 components and 0.413524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065603Jy  sigma=1.214715
! Fit after  self-cal, rms=0.065595Jy  sigma=1.214519
wmodel J0029+0509_S_map.mod
! Writing 224 model components to file: J0029+0509_S_map.mod
wobs   J0029+0509_S_uvs.fits
! Writing UV FITS file: J0029+0509_S_uvs.fits
wwins  J0029+0509_S_map.win
! wwins: Wrote 4 windows to J0029+0509_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000447147 Jy
! Component: 100  -  total flux cleaned = -0.000448524 Jy
! Component: 150  -  total flux cleaned = -0.000264413 Jy
! Component: 200  -  total flux cleaned = -0.000194329 Jy
! Component: 250  -  total flux cleaned = -0.000227258 Jy
! Component: 300  -  total flux cleaned = -0.000228098 Jy
! Component: 350  -  total flux cleaned = -0.000228218 Jy
! Component: 400  -  total flux cleaned = -1.30767e-05 Jy
! Component: 450  -  total flux cleaned = 4.62926e-05 Jy
! Component: 500  -  total flux cleaned = 0.000104368 Jy
! Component: 550  -  total flux cleaned = 0.000161551 Jy
! Component: 600  -  total flux cleaned = 0.000217187 Jy
! Component: 650  -  total flux cleaned = 0.000326156 Jy
! Component: 700  -  total flux cleaned = 0.000406037 Jy
! Component: 750  -  total flux cleaned = 0.00043226 Jy
! Component: 800  -  total flux cleaned = 0.000561636 Jy
! Component: 850  -  total flux cleaned = 0.000688461 Jy
! Component: 900  -  total flux cleaned = 0.000763303 Jy
! Component: 950  -  total flux cleaned = 0.000934718 Jy
! Component: 1000  -  total flux cleaned = 0.000982582 Jy
! Component: 1050  -  total flux cleaned = 0.00103046 Jy
! Component: 1100  -  total flux cleaned = 0.00114756 Jy
! Component: 1150  -  total flux cleaned = 0.00126244 Jy
! Component: 1200  -  total flux cleaned = 0.00130724 Jy
! Component: 1250  -  total flux cleaned = 0.00124016 Jy
! Component: 1300  -  total flux cleaned = 0.00135051 Jy
! Component: 1350  -  total flux cleaned = 0.00132878 Jy
! Component: 1400  -  total flux cleaned = 0.00137155 Jy
! Component: 1450  -  total flux cleaned = 0.00137179 Jy
! Component: 1500  -  total flux cleaned = 0.00137163 Jy
! Component: 1550  -  total flux cleaned = 0.00137137 Jy
! Component: 1600  -  total flux cleaned = 0.00137127 Jy
! Component: 1650  -  total flux cleaned = 0.00141164 Jy
! Component: 1700  -  total flux cleaned = 0.00145143 Jy
! Component: 1750  -  total flux cleaned = 0.00149075 Jy
! Component: 1800  -  total flux cleaned = 0.00152928 Jy
! Component: 1850  -  total flux cleaned = 0.00147197 Jy
! Component: 1900  -  total flux cleaned = 0.00158618 Jy
! Component: 1950  -  total flux cleaned = 0.00160473 Jy
! Component: 2000  -  total flux cleaned = 0.00166056 Jy
! Component: 2050  -  total flux cleaned = 0.00171568 Jy
! Component: 2100  -  total flux cleaned = 0.00180648 Jy
! Component: 2150  -  total flux cleaned = 0.00186025 Jy
! Component: 2200  -  total flux cleaned = 0.00187768 Jy
! Component: 2250  -  total flux cleaned = 0.0018777 Jy
! Component: 2300  -  total flux cleaned = 0.00198225 Jy
! Component: 2350  -  total flux cleaned = 0.00203387 Jy
! Component: 2400  -  total flux cleaned = 0.00206817 Jy
! Component: 2450  -  total flux cleaned = 0.00210166 Jy
! Component: 2500  -  total flux cleaned = 0.00210137 Jy
! Component: 2550  -  total flux cleaned = 0.00211774 Jy
! Component: 2600  -  total flux cleaned = 0.00208525 Jy
! Component: 2650  -  total flux cleaned = 0.00210153 Jy
! Component: 2700  -  total flux cleaned = 0.00200527 Jy
! Component: 2750  -  total flux cleaned = 0.00210096 Jy
! Component: 2800  -  total flux cleaned = 0.00208513 Jy
! Component: 2850  -  total flux cleaned = 0.0020695 Jy
! Component: 2900  -  total flux cleaned = 0.00203861 Jy
! Component: 2950  -  total flux cleaned = 0.0019156 Jy
! Component: 3000  -  total flux cleaned = 0.00194617 Jy
! Component: 3050  -  total flux cleaned = 0.00191585 Jy
! Component: 3100  -  total flux cleaned = 0.00190082 Jy
! Component: 3150  -  total flux cleaned = 0.00194558 Jy
! Component: 3200  -  total flux cleaned = 0.00191597 Jy
! Component: 3250  -  total flux cleaned = 0.00197458 Jy
! Component: 3300  -  total flux cleaned = 0.00193095 Jy
! Component: 3350  -  total flux cleaned = 0.00194526 Jy
! Component: 3400  -  total flux cleaned = 0.00194525 Jy
! Component: 3450  -  total flux cleaned = 0.00201618 Jy
! Component: 3500  -  total flux cleaned = 0.00194553 Jy
! Component: 3550  -  total flux cleaned = 0.00195963 Jy
! Component: 3600  -  total flux cleaned = 0.002043 Jy
! Component: 3650  -  total flux cleaned = 0.0020566 Jy
! Component: 3700  -  total flux cleaned = 0.0021113 Jy
! Component: 3750  -  total flux cleaned = 0.0020839 Jy
! Component: 3800  -  total flux cleaned = 0.00211102 Jy
! Component: 3850  -  total flux cleaned = 0.00208413 Jy
! Component: 3900  -  total flux cleaned = 0.00213774 Jy
! Component: 3950  -  total flux cleaned = 0.00219076 Jy
! Component: 4000  -  total flux cleaned = 0.00216432 Jy
! Component: 4050  -  total flux cleaned = 0.00219057 Jy
! Total flux subtracted in 4096 components = 0.00219057 Jy
! Clean residual min=-0.000828 max=0.000823 Jy/beam
! Clean residual mean=-0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.415715 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 519 components and 0.415715 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0029+0509_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.199 x 7.144 at -1.171 degrees (North through East)
! Clean map  min=-0.0015236  max=0.21131 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0029+0509_S_map.fits
wmodel /vlbi/uf001/uva//J0029+0509_S_map.mod
! Writing 519 model components to file: /vlbi/uf001/uva//J0029+0509_S_map.mod
wobs   /vlbi/uf001/uva//J0029+0509_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0029+0509_S_uvs.fits
wwins  /vlbi/uf001/uva//J0029+0509_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0029+0509_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.211314 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000234202 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.332493 0.332493 0.664986 1.32997 2.65995 5.31989 10.6398 21.2796 42.5591 85.1183
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.211 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  902.274 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0029+0509_S_dfm.log closed on Sun Jan 13 20:35:32 2019