! Started logfile: /vlbi/uf001/uva//J0025-2227_S_dfm.log on Sun Jan 13 20:34:00 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0025-2227_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0025-2227_S_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.96746 visibilities/baseline/integration-bin.
! Found source: J0025-2227
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3657 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0025-2227_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003443Jy  sigma=16.418845
! Fit after  self-cal, rms=0.799201Jy  sigma=13.098192
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.491 mas, bmaj=6.981 mas, bpa=-3.421 degrees
! Estimated noise=1.02549 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153965 Jy
! Component: 100  -  total flux cleaned = 0.196573 Jy
! Total flux subtracted in 100 components = 0.196573 Jy
! Clean residual min=-0.009493 max=0.017092 Jy/beam
! Clean residual mean=-0.000020 rms=0.002492 Jy/beam
! Combined flux in latest and established models = 0.196573 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.196573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094242Jy  sigma=1.373179
! Fit after  self-cal, rms=0.094144Jy  sigma=1.371440
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177066 Jy
! Component: 100  -  total flux cleaned = 0.0263785 Jy
! Total flux subtracted in 100 components = 0.0263785 Jy
! Clean residual min=-0.008060 max=0.011193 Jy/beam
! Clean residual mean=-0.000014 rms=0.001901 Jy/beam
! Combined flux in latest and established models = 0.222952 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.222952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090436Jy  sigma=1.287893
! Fit after  self-cal, rms=0.090416Jy  sigma=1.287378
! Inverting map 
! Added new window around map position (4.5, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103826 Jy
! Component: 100  -  total flux cleaned = 0.0156224 Jy
! Total flux subtracted in 100 components = 0.0156224 Jy
! Clean residual min=-0.007092 max=0.007733 Jy/beam
! Clean residual mean=-0.000009 rms=0.001672 Jy/beam
! Combined flux in latest and established models = 0.238574 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 36 components and 0.238574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089029Jy  sigma=1.260514
! Fit after  self-cal, rms=0.088845Jy  sigma=1.257795
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=7.885 mas, bpa=-3.647 degrees
! Estimated noise=0.792084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620101 Jy
! Component: 100  -  total flux cleaned = 0.00991784 Jy
! Component: 150  -  total flux cleaned = 0.0123655 Jy
! Component: 200  -  total flux cleaned = 0.0136007 Jy
! Total flux subtracted in 200 components = 0.0136007 Jy
! Clean residual min=-0.004757 max=0.006059 Jy/beam
! Clean residual mean=-0.000009 rms=0.001364 Jy/beam
! Combined flux in latest and established models = 0.252175 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 51 components and 0.252175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088423Jy  sigma=1.248278
! Fit after  self-cal, rms=0.088377Jy  sigma=1.247743
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.949 x 7.885 at -3.647 degrees (North through East)
! Clean map  min=-0.0046779  max=0.19606 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.98     HN        1.10     KP        0.99     
!   LA        0.96     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        0.95     HN        1.15     KP        1.00     
!   LA        0.96     MK        0.98     NL        1.01     OV        0.96     
!   PT        1.04     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.00     HN        1.12     KP        0.98     
!   LA        0.96     MK        1.01     NL        0.98     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.088377Jy  sigma=1.247743
! Fit after  self-cal, rms=0.091995Jy  sigma=1.218585
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.958 mas, bmaj=7.859 mas, bpa=-3.338 degrees
! Estimated noise=0.791722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00195399 Jy
! Component: 100  -  total flux cleaned = -0.00212455 Jy
! Component: 150  -  total flux cleaned = -0.00217425 Jy
! Component: 200  -  total flux cleaned = -0.00217621 Jy
! Total flux subtracted in 200 components = -0.00217621 Jy
! Clean residual min=-0.004081 max=0.004115 Jy/beam
! Clean residual mean=0.000003 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.249999 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 61 components and 0.249999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091905Jy  sigma=1.217109
! Fit after  self-cal, rms=0.092012Jy  sigma=1.216820
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092012Jy  sigma=1.216820
! Fit after  self-cal, rms=0.092704Jy  sigma=1.205068
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=7.85 mas, bpa=-3.423 degrees
! Estimated noise=0.790927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.001048 Jy
! Component: 100  -  total flux cleaned = -0.00128558 Jy
! Component: 150  -  total flux cleaned = -0.00135036 Jy
! Component: 200  -  total flux cleaned = -0.00135113 Jy
! Total flux subtracted in 200 components = -0.00135113 Jy
! Clean residual min=-0.003730 max=0.003819 Jy/beam
! Clean residual mean=0.000001 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.248648 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.248648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092665Jy  sigma=1.204464
! Fit after  self-cal, rms=0.092700Jy  sigma=1.204371
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-82, -116).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00327384 Jy
! Component: 100  -  total flux cleaned = 0.00373843 Jy
! Component: 150  -  total flux cleaned = 0.00398625 Jy
! Component: 200  -  total flux cleaned = 0.00404024 Jy
! Total flux subtracted in 200 components = 0.00404024 Jy
! Clean residual min=-0.003341 max=0.003371 Jy/beam
! Clean residual mean=-0.000001 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.252688 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 89 components and 0.252688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092542Jy  sigma=1.201399
! Fit after  self-cal, rms=0.092523Jy  sigma=1.201099
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092523Jy  sigma=1.201099
! Fit after  self-cal, rms=0.093475Jy  sigma=1.199050
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=7.848 mas, bpa=-3.493 degrees
! Estimated noise=0.789843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000620176 Jy
! Component: 100  -  total flux cleaned = 0.00067208 Jy
! Component: 150  -  total flux cleaned = 0.000629052 Jy
! Component: 200  -  total flux cleaned = 0.000548353 Jy
! Total flux subtracted in 200 components = 0.000548353 Jy
! Clean residual min=-0.003182 max=0.003330 Jy/beam
! Clean residual mean=-0.000004 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.253236 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 98 components and 0.253236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093421Jy  sigma=1.198100
! Fit after  self-cal, rms=0.093433Jy  sigma=1.198033
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-96.5, 108).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000524084 Jy
! Component: 100  -  total flux cleaned = 0.000125538 Jy
! Component: 150  -  total flux cleaned = 0.000120659 Jy
! Component: 200  -  total flux cleaned = 6.79307e-05 Jy
! Total flux subtracted in 200 components = 6.79307e-05 Jy
! Clean residual min=-0.003169 max=0.003003 Jy/beam
! Clean residual mean=-0.000003 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.253304 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.253304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093307Jy  sigma=1.195069
! Fit after  self-cal, rms=0.093300Jy  sigma=1.194976
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093300Jy  sigma=1.194976
! Fit after  self-cal, rms=0.093214Jy  sigma=1.194829
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.513 mas, bmaj=17.62 mas, bpa=1.656 degrees
! Estimated noise=1.03106 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024592 Jy
! Component: 100  -  total flux cleaned = 0.000249897 Jy
! Component: 150  -  total flux cleaned = 7.38048e-05 Jy
! Component: 200  -  total flux cleaned = 1.87773e-05 Jy
! Total flux subtracted in 200 components = 1.87773e-05 Jy
! Clean residual min=-0.003043 max=0.002912 Jy/beam
! Clean residual mean=-0.000002 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.253323 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 127 components and 0.253323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093200Jy  sigma=1.194746
! Fit after  self-cal, rms=0.093203Jy  sigma=1.194731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.91407e-05 Jy
! Component: 100  -  total flux cleaned = -5.64673e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104822 Jy
! Component: 200  -  total flux cleaned = -0.000173404 Jy
! Total flux subtracted in 200 components = -0.000173404 Jy
! Clean residual min=-0.003023 max=0.002904 Jy/beam
! Clean residual mean=-0.000002 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.253149 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 135 components and 0.253149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093196Jy  sigma=1.194732
! Fit after  self-cal, rms=0.093198Jy  sigma=1.194726
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.844 mas, bpa=-3.518 degrees
! Estimated noise=0.788611 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.954 x 7.844 at -3.518 degrees (North through East)
! Clean map  min=-0.0030338  max=0.19688 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.491 mas, bmaj=6.919 mas, bpa=-3.225 degrees
! Estimated noise=1.02338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153607 Jy
! Component: 100  -  total flux cleaned = 0.196625 Jy
! Component: 150  -  total flux cleaned = 0.214557 Jy
! Component: 200  -  total flux cleaned = 0.224152 Jy
! Total flux subtracted in 200 components = 0.224152 Jy
! Clean residual min=-0.005673 max=0.005984 Jy/beam
! Clean residual mean=-0.000007 rms=0.001375 Jy/beam
! Combined flux in latest and established models = 0.224152 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.224152 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.844 mas, bpa=-3.518 degrees
! Estimated noise=0.788611 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00882167 Jy
! Component: 100  -  total flux cleaned = 0.0143114 Jy
! Component: 150  -  total flux cleaned = 0.017398 Jy
! Component: 200  -  total flux cleaned = 0.0197666 Jy
! Total flux subtracted in 200 components = 0.0197666 Jy
! Clean residual min=-0.003823 max=0.003558 Jy/beam
! Clean residual mean=-0.000010 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.243919 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 63 components and 0.243919 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.513 mas, bmaj=17.62 mas, bpa=1.656 degrees
! Estimated noise=1.03106 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00416813 Jy
! Component: 100  -  total flux cleaned = 0.00599304 Jy
! Component: 150  -  total flux cleaned = 0.00640338 Jy
! Component: 200  -  total flux cleaned = 0.0068541 Jy
! Total flux subtracted in 200 components = 0.0068541 Jy
! Clean residual min=-0.002940 max=0.002787 Jy/beam
! Clean residual mean=-0.000010 rms=0.000918 Jy/beam
! Combined flux in latest and established models = 0.250773 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291799 Jy
! Component: 100  -  total flux cleaned = 0.000550197 Jy
! Component: 150  -  total flux cleaned = 0.000703221 Jy
! Component: 200  -  total flux cleaned = 0.000842537 Jy
! Total flux subtracted in 200 components = 0.000842537 Jy
! Clean residual min=-0.002996 max=0.002720 Jy/beam
! Clean residual mean=-0.000007 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.251615 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 107 components and 0.251615 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.844 mas, bpa=-3.518 degrees
! Estimated noise=0.788611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235405 Jy
! Component: 100  -  total flux cleaned = 2.13658e-05 Jy
! Component: 150  -  total flux cleaned = -0.000101163 Jy
! Component: 200  -  total flux cleaned = -0.000209327 Jy
! Total flux subtracted in 200 components = -0.000209327 Jy
! Clean residual min=-0.003236 max=0.003004 Jy/beam
! Clean residual mean=-0.000004 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.251406 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.251406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093236Jy  sigma=1.195846
! Fit after  self-cal, rms=0.093225Jy  sigma=1.195709
wmodel J0025-2227_S_map.mod
! Writing 124 model components to file: J0025-2227_S_map.mod
wobs   J0025-2227_S_uvs.fits
! Writing UV FITS file: J0025-2227_S_uvs.fits
wwins  J0025-2227_S_map.win
! wwins: Wrote 4 windows to J0025-2227_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251765 Jy
! Component: 100  -  total flux cleaned = 6.31638e-05 Jy
! Component: 150  -  total flux cleaned = 0.000214054 Jy
! Component: 200  -  total flux cleaned = 0.00050141 Jy
! Component: 250  -  total flux cleaned = 0.000687346 Jy
! Component: 300  -  total flux cleaned = 0.00100279 Jy
! Component: 350  -  total flux cleaned = 0.00126396 Jy
! Component: 400  -  total flux cleaned = 0.00126378 Jy
! Component: 450  -  total flux cleaned = 0.00122283 Jy
! Component: 500  -  total flux cleaned = 0.00122321 Jy
! Component: 550  -  total flux cleaned = 0.00126176 Jy
! Component: 600  -  total flux cleaned = 0.00110647 Jy
! Component: 650  -  total flux cleaned = 0.000992875 Jy
! Component: 700  -  total flux cleaned = 0.0011041 Jy
! Component: 750  -  total flux cleaned = 0.00102992 Jy
! Component: 800  -  total flux cleaned = 0.00106623 Jy
! Component: 850  -  total flux cleaned = 0.00110141 Jy
! Component: 900  -  total flux cleaned = 0.00110158 Jy
! Component: 950  -  total flux cleaned = 0.00113537 Jy
! Component: 1000  -  total flux cleaned = 0.00103407 Jy
! Component: 1050  -  total flux cleaned = 0.00110087 Jy
! Component: 1100  -  total flux cleaned = 0.00103482 Jy
! Component: 1150  -  total flux cleaned = 0.000970103 Jy
! Component: 1200  -  total flux cleaned = 0.000938064 Jy
! Component: 1250  -  total flux cleaned = 0.000875046 Jy
! Component: 1300  -  total flux cleaned = 0.000936976 Jy
! Component: 1350  -  total flux cleaned = 0.000967466 Jy
! Component: 1400  -  total flux cleaned = 0.000966944 Jy
! Component: 1450  -  total flux cleaned = 0.000937207 Jy
! Component: 1500  -  total flux cleaned = 0.00102586 Jy
! Component: 1550  -  total flux cleaned = 0.00102598 Jy
! Component: 1600  -  total flux cleaned = 0.00102634 Jy
! Component: 1650  -  total flux cleaned = 0.00108363 Jy
! Component: 1700  -  total flux cleaned = 0.00114001 Jy
! Component: 1750  -  total flux cleaned = 0.00114039 Jy
! Component: 1800  -  total flux cleaned = 0.00125051 Jy
! Component: 1850  -  total flux cleaned = 0.00116849 Jy
! Component: 1900  -  total flux cleaned = 0.0011414 Jy
! Component: 1950  -  total flux cleaned = 0.00108787 Jy
! Component: 2000  -  total flux cleaned = 0.00111414 Jy
! Component: 2050  -  total flux cleaned = 0.00111417 Jy
! Component: 2100  -  total flux cleaned = 0.00111407 Jy
! Component: 2150  -  total flux cleaned = 0.00113937 Jy
! Component: 2200  -  total flux cleaned = 0.00111372 Jy
! Component: 2250  -  total flux cleaned = 0.00108865 Jy
! Component: 2300  -  total flux cleaned = 0.00111359 Jy
! Component: 2350  -  total flux cleaned = 0.00111347 Jy
! Component: 2400  -  total flux cleaned = 0.00113819 Jy
! Component: 2450  -  total flux cleaned = 0.00106555 Jy
! Component: 2500  -  total flux cleaned = 0.00108937 Jy
! Component: 2550  -  total flux cleaned = 0.00113703 Jy
! Component: 2600  -  total flux cleaned = 0.0011131 Jy
! Component: 2650  -  total flux cleaned = 0.0011602 Jy
! Component: 2700  -  total flux cleaned = 0.0012067 Jy
! Component: 2750  -  total flux cleaned = 0.00125303 Jy
! Component: 2800  -  total flux cleaned = 0.00134426 Jy
! Component: 2850  -  total flux cleaned = 0.00145734 Jy
! Component: 2900  -  total flux cleaned = 0.00147961 Jy
! Component: 2950  -  total flux cleaned = 0.00141293 Jy
! Component: 3000  -  total flux cleaned = 0.00150149 Jy
! Component: 3050  -  total flux cleaned = 0.00165492 Jy
! Component: 3100  -  total flux cleaned = 0.00165497 Jy
! Component: 3150  -  total flux cleaned = 0.00169821 Jy
! Component: 3200  -  total flux cleaned = 0.00178397 Jy
! Component: 3250  -  total flux cleaned = 0.00184772 Jy
! Component: 3300  -  total flux cleaned = 0.00191129 Jy
! Component: 3350  -  total flux cleaned = 0.00197428 Jy
! Component: 3400  -  total flux cleaned = 0.00207855 Jy
! Component: 3450  -  total flux cleaned = 0.00209928 Jy
! Component: 3500  -  total flux cleaned = 0.00211989 Jy
! Component: 3550  -  total flux cleaned = 0.00220179 Jy
! Component: 3600  -  total flux cleaned = 0.00232364 Jy
! Component: 3650  -  total flux cleaned = 0.00242455 Jy
! Component: 3700  -  total flux cleaned = 0.00250476 Jy
! Component: 3750  -  total flux cleaned = 0.00258445 Jy
! Component: 3800  -  total flux cleaned = 0.00264366 Jy
! Component: 3850  -  total flux cleaned = 0.00274193 Jy
! Component: 3900  -  total flux cleaned = 0.00287853 Jy
! Component: 3950  -  total flux cleaned = 0.00293675 Jy
! Component: 4000  -  total flux cleaned = 0.00301381 Jy
! Component: 4050  -  total flux cleaned = 0.00307128 Jy
! Total flux subtracted in 4096 components = 0.00310946 Jy
! Clean residual min=-0.001232 max=0.000996 Jy/beam
! Clean residual mean=-0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.254516 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 396 components and 0.254516 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0025-2227_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.954 x 7.844 at -3.518 degrees (North through East)
! Clean map  min=-0.0024677  max=0.19861 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0025-2227_S_map.fits
wmodel /vlbi/uf001/uva//J0025-2227_S_map.mod
! Writing 396 model components to file: /vlbi/uf001/uva//J0025-2227_S_map.mod
wobs   /vlbi/uf001/uva//J0025-2227_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0025-2227_S_uvs.fits
wwins  /vlbi/uf001/uva//J0025-2227_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0025-2227_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.198607 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000329559 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.497804 0.497804 0.995608 1.99122 3.98243 7.96486 15.9297 31.8595 63.7189
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.198 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  602.646 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0025-2227_S_dfm.log closed on Sun Jan 13 20:34:04 2019