! Started logfile: /vlbi/uf001/uvm//J0019+7327_X_b_dfm.log on Sun Jan 13 20:22:52 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0019+7327_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0019+7327_X_b_uvm.fits ! AN table 1: 13 integrations on 21 of 21 possible baselines. ! AN table 2: 17 integrations on 36 of 36 possible baselines. ! AN table 3: 4 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.808425 visibilities/baseline/integration-bin. ! Found source: J0019+7327 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 9672 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0019+7327_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=2.210543Jy sigma=20.994323 ! Fit after self-cal, rms=0.992030Jy sigma=9.193844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8139 mas, bmaj=1.642 mas, bpa=9.559 degrees ! Estimated noise=1.27436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40411 Jy ! Component: 100 - total flux cleaned = 1.7829 Jy ! Total flux subtracted in 100 components = 1.7829 Jy ! Clean residual min=-0.050865 max=0.152599 Jy/beam ! Clean residual mean=0.000099 rms=0.011910 Jy/beam ! Combined flux in latest and established models = 1.7829 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.7829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.348907Jy sigma=3.247068 ! Fit after self-cal, rms=0.348882Jy sigma=3.246998 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.153432 Jy ! Component: 100 - total flux cleaned = 0.216951 Jy ! Total flux subtracted in 100 components = 0.216951 Jy ! Clean residual min=-0.048007 max=0.054876 Jy/beam ! Clean residual mean=0.000078 rms=0.009096 Jy/beam ! Combined flux in latest and established models = 1.99985 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 1.99985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.258067Jy sigma=2.453455 ! Fit after self-cal, rms=0.258048Jy sigma=2.453416 ! Inverting map ! Added new window around map position (-0.4, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0482245 Jy ! Component: 100 - total flux cleaned = 0.0665081 Jy ! Total flux subtracted in 100 components = 0.0665081 Jy ! Clean residual min=-0.046751 max=0.049847 Jy/beam ! Clean residual mean=0.000071 rms=0.008632 Jy/beam ! Combined flux in latest and established models = 2.06636 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 2.06636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.243557Jy sigma=2.318990 ! Fit after self-cal, rms=0.242781Jy sigma=2.311566 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.079 mas, bmaj=1.903 mas, bpa=7.104 degrees ! Estimated noise=0.956413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061935 Jy ! Component: 100 - total flux cleaned = 0.085608 Jy ! Component: 150 - total flux cleaned = 0.0986471 Jy ! Component: 200 - total flux cleaned = 0.103397 Jy ! Total flux subtracted in 200 components = 0.103397 Jy ! Clean residual min=-0.051875 max=0.048805 Jy/beam ! Clean residual mean=0.000103 rms=0.009290 Jy/beam ! Combined flux in latest and established models = 2.16976 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 38 components and 2.16976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.222125Jy sigma=2.130782 ! Fit after self-cal, rms=0.221633Jy sigma=2.124227 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.079 x 1.903 at 7.104 degrees (North through East) ! Clean map min=-0.049946 max=1.8576 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.98 KP 1.01 LA 1.01 ! NL 1.05 OV 0.92 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.15 HN 0.96 KP 1.04 ! LA 0.81 MK 1.04 NL 1.14 OV 0.95 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00 HN 0.95 KP 1.05 ! LA 1.00 MK 1.01 NL 1.08 PT 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.99 KP 1.01 LA 1.02 ! NL 1.04 OV 0.93 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.12 HN 0.98 KP 1.04 ! LA 0.82 MK 1.01 NL 1.15 OV 0.95 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HN 0.96 KP 1.04 ! LA 1.01 MK 1.00 NL 1.08 PT 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.99 KP 1.02 LA 1.02 ! NL 1.04 OV 0.91 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.14 HN 0.96 KP 1.05 ! LA 0.84 MK 1.01 NL 1.13 OV 0.98 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 0.98 KP 1.03 ! LA 1.00 MK 1.01 NL 1.08 PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.98 KP 1.03 LA 1.02 ! NL 1.03 OV 0.93 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.11 HN 0.97 KP 1.05 ! LA 0.86 MK 1.02 NL 1.14 OV 0.98 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.01 HN 0.96 KP 1.04 ! LA 1.01 MK 1.00 NL 1.06 PT 0.95 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.99 KP 1.02 LA 1.02 ! NL 1.05 OV 0.93 PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.10 HN 0.97 KP 1.05 ! LA 0.84 MK 1.07 NL 1.14 OV 0.94 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 HN 0.95 KP 1.03 ! LA 1.01 MK 1.01 NL 1.10 PT 0.96 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.99 KP 1.01 LA 1.03 ! NL 1.04 OV 0.95 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.13 HN 0.97 KP 1.06 ! LA 0.82 MK 1.05 NL 1.13 OV 0.96 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 HN 0.95 KP 1.05 ! LA 1.00 MK 1.03 NL 1.07 PT 0.96 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.99 KP 1.02 LA 1.02 ! NL 1.03 OV 0.94 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.11 HN 0.97 KP 1.08 ! LA 0.83 MK 1.02 NL 1.15 OV 0.97 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.94 KP 1.05 ! LA 1.02 MK 1.03 NL 1.08 PT 0.95 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.00 KP 1.02 LA 1.01 ! NL 1.04 OV 0.95 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.11 HN 0.95 KP 1.04 ! LA 0.85 MK 1.04 NL 1.14 OV 0.95 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.99 HN 0.97 KP 1.05 ! LA 1.02 MK 1.01 NL 1.08 PT 0.96 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.00 KP 1.02 LA 1.03 ! NL 1.05 OV 0.94 PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.15 HN 0.96 KP 1.04 ! LA 0.84 MK 1.01 NL 1.13 OV 0.97 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 0.99 KP 1.04 ! LA 1.02 MK 1.02 NL 1.05 PT 0.96 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.00 KP 1.04 LA 1.01 ! NL 1.05 OV 0.95 PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.14 HN 0.98 KP 1.05 ! LA 0.84 MK 1.00 NL 1.13 OV 0.96 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 HN 0.97 KP 1.04 ! LA 1.03 MK 1.02 NL 1.06 PT 0.95 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.99 KP 1.02 LA 1.02 ! NL 1.04 OV 0.94 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.10 HN 0.98 KP 1.05 ! LA 0.84 MK 0.99 NL 1.13 OV 0.97 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 HN 0.95 KP 1.05 ! LA 1.01 MK 1.02 NL 1.11 PT 0.95 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.00 KP 1.03 LA 1.01 ! NL 1.05 OV 0.95 PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.12 HN 0.98 KP 1.04 ! LA 0.85 MK 0.95 NL 1.14 OV 0.95 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.99 HN 0.94 KP 1.04 ! LA 1.03 MK 1.02 NL 1.06 PT 0.97 ! ! ! Fit before self-cal, rms=0.221633Jy sigma=2.124227 ! Fit after self-cal, rms=0.138735Jy sigma=1.305596 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.078 mas, bmaj=1.894 mas, bpa=6.795 degrees ! Estimated noise=0.961182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170378 Jy ! Component: 100 - total flux cleaned = -0.00181272 Jy ! Component: 150 - total flux cleaned = -0.00581694 Jy ! Component: 200 - total flux cleaned = -0.00916418 Jy ! Total flux subtracted in 200 components = -0.00916418 Jy ! Clean residual min=-0.020135 max=0.026470 Jy/beam ! Clean residual mean=-0.000088 rms=0.004609 Jy/beam ! Combined flux in latest and established models = 2.16059 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 2.16059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129083Jy sigma=1.211926 ! Fit after self-cal, rms=0.128538Jy sigma=1.205940 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128538Jy sigma=1.205940 ! Fit after self-cal, rms=0.077867Jy sigma=0.724518 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=1.899 mas, bpa=6.605 degrees ! Estimated noise=0.959251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.01542 Jy ! Component: 100 - total flux cleaned = -0.0210299 Jy ! Component: 150 - total flux cleaned = -0.0240495 Jy ! Component: 200 - total flux cleaned = -0.0267933 Jy ! Total flux subtracted in 200 components = -0.0267933 Jy ! Clean residual min=-0.008986 max=0.007329 Jy/beam ! Clean residual mean=0.000003 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 2.1338 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 2.1338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073702Jy sigma=0.683894 ! Fit after self-cal, rms=0.073283Jy sigma=0.680935 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00356485 Jy ! Component: 100 - total flux cleaned = -0.00577949 Jy ! Component: 150 - total flux cleaned = -0.00673715 Jy ! Component: 200 - total flux cleaned = -0.00725188 Jy ! Total flux subtracted in 200 components = -0.00725188 Jy ! Clean residual min=-0.008639 max=0.006727 Jy/beam ! Clean residual mean=0.000006 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 2.12655 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 2.12655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072191Jy sigma=0.669775 ! Fit after self-cal, rms=0.072082Jy sigma=0.669212 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072082Jy sigma=0.669212 ! Fit after self-cal, rms=0.070509Jy sigma=0.656614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.081 mas, bmaj=1.899 mas, bpa=6.516 degrees ! Estimated noise=0.959017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00891477 Jy ! Component: 100 - total flux cleaned = -0.0117691 Jy ! Component: 150 - total flux cleaned = -0.0136114 Jy ! Component: 200 - total flux cleaned = -0.0143218 Jy ! Total flux subtracted in 200 components = -0.0143218 Jy ! Clean residual min=-0.007208 max=0.006293 Jy/beam ! Clean residual mean=0.000010 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 2.11223 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 2.11223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068872Jy sigma=0.640097 ! Fit after self-cal, rms=0.068726Jy sigma=0.639311 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00186622 Jy ! Component: 100 - total flux cleaned = -0.00216932 Jy ! Component: 150 - total flux cleaned = -0.00217051 Jy ! Component: 200 - total flux cleaned = -0.00243008 Jy ! Total flux subtracted in 200 components = -0.00243008 Jy ! Clean residual min=-0.006841 max=0.005750 Jy/beam ! Clean residual mean=0.000011 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 2.1098 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 2.1098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068209Jy sigma=0.633753 ! Fit after self-cal, rms=0.068163Jy sigma=0.633588 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068163Jy sigma=0.633588 ! Fit after self-cal, rms=0.067426Jy sigma=0.627716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.348 mas, bmaj=3.113 mas, bpa=-23.76 degrees ! Estimated noise=1.18834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00671715 Jy ! Component: 100 - total flux cleaned = -0.00943585 Jy ! Component: 150 - total flux cleaned = -0.0112236 Jy ! Component: 200 - total flux cleaned = -0.012626 Jy ! Total flux subtracted in 200 components = -0.012626 Jy ! Clean residual min=-0.005839 max=0.004765 Jy/beam ! Clean residual mean=0.000026 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 2.09717 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 128 components and 2.09717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066747Jy sigma=0.621828 ! Fit after self-cal, rms=0.066684Jy sigma=0.621461 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144802 Jy ! Component: 100 - total flux cleaned = -0.00194514 Jy ! Component: 150 - total flux cleaned = -0.00230264 Jy ! Component: 200 - total flux cleaned = -0.00261795 Jy ! Total flux subtracted in 200 components = -0.00261795 Jy ! Clean residual min=-0.005526 max=0.004595 Jy/beam ! Clean residual mean=0.000029 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 2.09455 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 2.09455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066557Jy sigma=0.620311 ! Fit after self-cal, rms=0.066539Jy sigma=0.620242 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.081 mas, bmaj=1.899 mas, bpa=6.45 degrees ! Estimated noise=0.958795 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.081 x 1.899 at 6.45 degrees (North through East) ! Clean map min=-0.0089419 max=1.8561 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066539Jy sigma=0.620242 ! Fit after self-cal, rms=0.063284Jy sigma=0.571974 ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=1.899 mas, bpa=6.417 degrees ! Estimated noise=0.958891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00575466 Jy ! Component: 100 - total flux cleaned = -0.00691335 Jy ! Component: 150 - total flux cleaned = -0.00719632 Jy ! Component: 200 - total flux cleaned = -0.00732564 Jy ! Total flux subtracted in 200 components = -0.00732564 Jy ! Clean residual min=-0.005967 max=0.005054 Jy/beam ! Clean residual mean=0.000013 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 2.08723 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 146 components and 2.08723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062532Jy sigma=0.563834 ! Fit after self-cal, rms=0.062485Jy sigma=0.563626 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000685194 Jy ! Component: 100 - total flux cleaned = -0.000920625 Jy ! Component: 150 - total flux cleaned = -0.000919727 Jy ! Component: 200 - total flux cleaned = -0.00102368 Jy ! Total flux subtracted in 200 components = -0.00102368 Jy ! Clean residual min=-0.005582 max=0.004785 Jy/beam ! Clean residual mean=0.000014 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 2.0862 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 152 components and 2.0862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062159Jy sigma=0.559829 ! Fit after self-cal, rms=0.062137Jy sigma=0.559752 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062137Jy sigma=0.559752 ! Fit after self-cal, rms=0.061870Jy sigma=0.557486 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8183 mas, bmaj=1.633 mas, bpa=8.836 degrees ! Estimated noise=1.27904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40749 Jy ! Component: 100 - total flux cleaned = 1.77851 Jy ! Component: 150 - total flux cleaned = 1.92758 Jy ! Component: 200 - total flux cleaned = 1.98871 Jy ! Total flux subtracted in 200 components = 1.98871 Jy ! Clean residual min=-0.012126 max=0.025249 Jy/beam ! Clean residual mean=0.000018 rms=0.002415 Jy/beam ! Combined flux in latest and established models = 1.98871 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.98871 Jy ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=1.899 mas, bpa=6.364 degrees ! Estimated noise=0.958879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0384753 Jy ! Component: 100 - total flux cleaned = 0.0599415 Jy ! Component: 150 - total flux cleaned = 0.0741181 Jy ! Component: 200 - total flux cleaned = 0.0831358 Jy ! Total flux subtracted in 200 components = 0.0831358 Jy ! Clean residual min=-0.005826 max=0.007598 Jy/beam ! Clean residual mean=0.000014 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 2.07185 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 2.07185 Jy ! Inverting map ! Added new window around map position (0.8, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048676 Jy ! Component: 100 - total flux cleaned = 0.00675681 Jy ! Component: 150 - total flux cleaned = 0.00794031 Jy ! Component: 200 - total flux cleaned = 0.00878427 Jy ! Total flux subtracted in 200 components = 0.00878427 Jy ! Clean residual min=-0.005877 max=0.005495 Jy/beam ! Clean residual mean=0.000012 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 2.08063 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 55 components and 2.08063 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=3.118 mas, bpa=-23.7 degrees ! Estimated noise=1.18722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271163 Jy ! Component: 100 - total flux cleaned = 0.0025686 Jy ! Component: 150 - total flux cleaned = 0.00245199 Jy ! Component: 200 - total flux cleaned = 0.00224032 Jy ! Total flux subtracted in 200 components = 0.00224032 Jy ! Clean residual min=-0.005236 max=0.004159 Jy/beam ! Clean residual mean=0.000023 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 2.08287 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.19654e-05 Jy ! Component: 100 - total flux cleaned = -0.00034067 Jy ! Component: 150 - total flux cleaned = -0.000574835 Jy ! Component: 200 - total flux cleaned = -0.000796805 Jy ! Total flux subtracted in 200 components = -0.000796805 Jy ! Clean residual min=-0.005256 max=0.004161 Jy/beam ! Clean residual mean=0.000024 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 2.08208 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 87 components and 2.08208 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=1.899 mas, bpa=6.364 degrees ! Estimated noise=0.958879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135657 Jy ! Component: 100 - total flux cleaned = -0.00105584 Jy ! Component: 150 - total flux cleaned = -0.00105714 Jy ! Component: 200 - total flux cleaned = -0.00118607 Jy ! Total flux subtracted in 200 components = -0.00118607 Jy ! Clean residual min=-0.005638 max=0.004637 Jy/beam ! Clean residual mean=0.000014 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 2.08089 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 2.08089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061772Jy sigma=0.561954 ! Fit after self-cal, rms=0.061552Jy sigma=0.559505 wmodel J0019+7327_X_b_map.mod ! Writing 108 model components to file: J0019+7327_X_b_map.mod wobs J0019+7327_X_b_uvs.fits ! Writing UV FITS file: J0019+7327_X_b_uvs.fits wwins J0019+7327_X_b_map.win ! wwins: Wrote 5 windows to J0019+7327_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000442653 Jy ! Component: 100 - total flux cleaned = -3.00154e-05 Jy ! Component: 150 - total flux cleaned = 0.00044926 Jy ! Component: 200 - total flux cleaned = 0.000374809 Jy ! Component: 250 - total flux cleaned = 0.000668191 Jy ! Component: 300 - total flux cleaned = 0.00088072 Jy ! Component: 350 - total flux cleaned = 0.00102034 Jy ! Component: 400 - total flux cleaned = 0.00115736 Jy ! Component: 450 - total flux cleaned = 0.00122392 Jy ! Component: 500 - total flux cleaned = 0.00115994 Jy ! Component: 550 - total flux cleaned = 0.00116136 Jy ! Component: 600 - total flux cleaned = 0.00122445 Jy ! Component: 650 - total flux cleaned = 0.0011642 Jy ! Component: 700 - total flux cleaned = 0.000986536 Jy ! Component: 750 - total flux cleaned = 0.00098712 Jy ! Component: 800 - total flux cleaned = 0.000930707 Jy ! Component: 850 - total flux cleaned = 0.00104303 Jy ! Component: 900 - total flux cleaned = 0.00104321 Jy ! Component: 950 - total flux cleaned = 0.000825369 Jy ! Component: 1000 - total flux cleaned = 0.000717292 Jy ! Component: 1050 - total flux cleaned = 0.000664106 Jy ! Component: 1100 - total flux cleaned = 0.00040259 Jy ! Component: 1150 - total flux cleaned = 0.000350764 Jy ! Component: 1200 - total flux cleaned = 0.000248481 Jy ! Component: 1250 - total flux cleaned = 9.7336e-05 Jy ! Component: 1300 - total flux cleaned = 9.76253e-05 Jy ! Component: 1350 - total flux cleaned = -4.98848e-05 Jy ! Component: 1400 - total flux cleaned = 0.000143587 Jy ! Component: 1450 - total flux cleaned = -0.000240266 Jy ! Component: 1500 - total flux cleaned = -2.33192e-06 Jy ! Component: 1550 - total flux cleaned = -4.91215e-05 Jy ! Component: 1600 - total flux cleaned = 9.08119e-05 Jy ! Component: 1650 - total flux cleaned = 0.000136957 Jy ! Component: 1700 - total flux cleaned = 0.000182568 Jy ! Component: 1750 - total flux cleaned = 0.000318426 Jy ! Component: 1800 - total flux cleaned = 0.000408097 Jy ! Component: 1850 - total flux cleaned = 0.000408314 Jy ! Component: 1900 - total flux cleaned = 0.0004968 Jy ! Component: 1950 - total flux cleaned = 0.000322406 Jy ! Component: 2000 - total flux cleaned = 0.000365911 Jy ! Component: 2050 - total flux cleaned = 0.000451791 Jy ! Component: 2100 - total flux cleaned = 0.000579224 Jy ! Component: 2150 - total flux cleaned = 0.000536845 Jy ! Component: 2200 - total flux cleaned = 0.000620372 Jy ! Component: 2250 - total flux cleaned = 0.000579122 Jy ! Component: 2300 - total flux cleaned = 0.000825672 Jy ! Component: 2350 - total flux cleaned = 0.000744033 Jy ! Component: 2400 - total flux cleaned = 0.000703388 Jy ! Component: 2450 - total flux cleaned = 0.000863963 Jy ! Component: 2500 - total flux cleaned = 0.000783861 Jy ! Component: 2550 - total flux cleaned = 0.000823052 Jy ! Component: 2600 - total flux cleaned = 0.000862453 Jy ! Component: 2650 - total flux cleaned = 0.000784553 Jy ! Component: 2700 - total flux cleaned = 0.000669215 Jy ! Component: 2750 - total flux cleaned = 0.000745581 Jy ! Component: 2800 - total flux cleaned = 0.000669854 Jy ! Component: 2850 - total flux cleaned = 0.00074502 Jy ! Component: 2900 - total flux cleaned = 0.000707745 Jy ! Component: 2950 - total flux cleaned = 0.000670067 Jy ! Component: 3000 - total flux cleaned = 0.000633622 Jy ! Component: 3050 - total flux cleaned = 0.000487632 Jy ! Component: 3100 - total flux cleaned = 0.00037854 Jy ! Component: 3150 - total flux cleaned = 0.000378521 Jy ! Component: 3200 - total flux cleaned = 0.000307218 Jy ! Component: 3250 - total flux cleaned = 0.000307353 Jy ! Component: 3300 - total flux cleaned = 0.000201202 Jy ! Component: 3350 - total flux cleaned = 0.000201014 Jy ! Component: 3400 - total flux cleaned = -7.76175e-05 Jy ! Component: 3450 - total flux cleaned = -0.000146923 Jy ! Component: 3500 - total flux cleaned = -0.000284549 Jy ! Component: 3550 - total flux cleaned = -0.000523236 Jy ! Component: 3600 - total flux cleaned = -0.000455348 Jy ! Component: 3650 - total flux cleaned = -0.00062387 Jy ! Component: 3700 - total flux cleaned = -0.000657405 Jy ! Component: 3750 - total flux cleaned = -0.000723764 Jy ! Component: 3800 - total flux cleaned = -0.00078995 Jy ! Component: 3850 - total flux cleaned = -0.000823036 Jy ! Component: 3900 - total flux cleaned = -0.000986509 Jy ! Component: 3950 - total flux cleaned = -0.000954014 Jy ! Component: 4000 - total flux cleaned = -0.00105089 Jy ! Component: 4050 - total flux cleaned = -0.0011471 Jy ! Total flux subtracted in 4096 components = -0.00111487 Jy ! Clean residual min=-0.002034 max=0.001706 Jy/beam ! Clean residual mean=0.000004 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 2.07978 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 416 components and 2.07978 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0019+7327_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.082 x 1.899 at 6.364 degrees (North through East) ! Clean map min=-0.0049161 max=1.8645 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0019+7327_X_b_map.fits wmodel /vlbi/uf001/uvm//J0019+7327_X_b_map.mod ! Writing 416 model components to file: /vlbi/uf001/uvm//J0019+7327_X_b_map.mod wobs /vlbi/uf001/uvm//J0019+7327_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0019+7327_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0019+7327_X_b_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0019+7327_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.86454 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000554033 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0891428 0.0891428 0.178286 0.356571 0.713142 1.42628 2.85257 5.70514 11.4103 22.8206 45.6411 91.2822 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.864 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3365.39 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0019+7327_X_b_dfm.log closed on Sun Jan 13 20:22:57 2019