! Started logfile: /vlbi/uf001/uva//J0013+4636_S_dfm.log on Sun Jan 13 20:29:41 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0013+4636_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0013+4636_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.917739 visibilities/baseline/integration-bin.
! Found source: J0013+4636
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7062 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0013+4636_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012567Jy  sigma=23.322422
! Fit after  self-cal, rms=0.815497Jy  sigma=18.775230
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.997 mas, bmaj=4.713 mas, bpa=-13.13 degrees
! Estimated noise=0.554258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142202 Jy
! Component: 100  -  total flux cleaned = 0.192963 Jy
! Total flux subtracted in 100 components = 0.192963 Jy
! Clean residual min=-0.008080 max=0.021399 Jy/beam
! Clean residual mean=-0.000010 rms=0.002325 Jy/beam
! Combined flux in latest and established models = 0.192963 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.192963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070727Jy  sigma=1.601783
! Fit after  self-cal, rms=0.070207Jy  sigma=1.589467
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238883 Jy
! Component: 100  -  total flux cleaned = 0.0352646 Jy
! Total flux subtracted in 100 components = 0.0352646 Jy
! Clean residual min=-0.005006 max=0.009368 Jy/beam
! Clean residual mean=0.000003 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.228228 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.228228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061386Jy  sigma=1.372130
! Fit after  self-cal, rms=0.061297Jy  sigma=1.369836
! Inverting map 
! Added new window around map position (4.5, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00882711 Jy
! Component: 100  -  total flux cleaned = 0.0115831 Jy
! Total flux subtracted in 100 components = 0.0115831 Jy
! Clean residual min=-0.003929 max=0.005334 Jy/beam
! Clean residual mean=0.000007 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.239811 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.239811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060184Jy  sigma=1.342397
! Fit after  self-cal, rms=0.060104Jy  sigma=1.340499
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.645 mas, bmaj=5.473 mas, bpa=-11.7 degrees
! Estimated noise=0.373749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00517592 Jy
! Component: 100  -  total flux cleaned = 0.00780786 Jy
! Component: 150  -  total flux cleaned = 0.00844671 Jy
! Component: 200  -  total flux cleaned = 0.00860274 Jy
! Total flux subtracted in 200 components = 0.00860274 Jy
! Clean residual min=-0.002974 max=0.004249 Jy/beam
! Clean residual mean=0.000006 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.248414 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 42 components and 0.248414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059624Jy  sigma=1.328076
! Fit after  self-cal, rms=0.059584Jy  sigma=1.327117
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.645 x 5.473 at -11.7 degrees (North through East)
! Clean map  min=-0.0028888  max=0.17993 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.90     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.06     OV        0.97     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.94     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.09     OV        0.99     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.94     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.05     OV        1.00     
!   PT        1.01     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.059584Jy  sigma=1.327117
! Fit after  self-cal, rms=0.058905Jy  sigma=1.305037
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=5.484 mas, bpa=-12.6 degrees
! Estimated noise=0.373106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.48812e-05 Jy
! Component: 100  -  total flux cleaned = -3.13056e-05 Jy
! Component: 150  -  total flux cleaned = -6.59831e-05 Jy
! Component: 200  -  total flux cleaned = -0.000131312 Jy
! Total flux subtracted in 200 components = -0.000131312 Jy
! Clean residual min=-0.002115 max=0.001962 Jy/beam
! Clean residual mean=0.000008 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.248282 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 65 components and 0.248282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058856Jy  sigma=1.303879
! Fit after  self-cal, rms=0.058876Jy  sigma=1.303752
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058876Jy  sigma=1.303752
! Fit after  self-cal, rms=0.058627Jy  sigma=1.298497
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=5.469 mas, bpa=-12.22 degrees
! Estimated noise=0.371876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211708 Jy
! Component: 100  -  total flux cleaned = 2.61115e-05 Jy
! Component: 150  -  total flux cleaned = 0.000150524 Jy
! Component: 200  -  total flux cleaned = 0.000214471 Jy
! Total flux subtracted in 200 components = 0.000214471 Jy
! Clean residual min=-0.001777 max=0.001907 Jy/beam
! Clean residual mean=0.000001 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.248497 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.248497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058599Jy  sigma=1.297844
! Fit after  self-cal, rms=0.058597Jy  sigma=1.297789
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38, 71.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155238 Jy
! Component: 100  -  total flux cleaned = 0.00203706 Jy
! Component: 150  -  total flux cleaned = 0.00218594 Jy
! Component: 200  -  total flux cleaned = 0.00225261 Jy
! Total flux subtracted in 200 components = 0.00225261 Jy
! Clean residual min=-0.001667 max=0.001735 Jy/beam
! Clean residual mean=0.000002 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.250749 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 97 components and 0.250749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058546Jy  sigma=1.296828
! Fit after  self-cal, rms=0.058546Jy  sigma=1.296790
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058546Jy  sigma=1.296790
! Fit after  self-cal, rms=0.058503Jy  sigma=1.296646
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.633 mas, bmaj=5.464 mas, bpa=-12.13 degrees
! Estimated noise=0.371531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.22126e-05 Jy
! Component: 100  -  total flux cleaned = 2.26272e-06 Jy
! Component: 150  -  total flux cleaned = 8.2442e-05 Jy
! Component: 200  -  total flux cleaned = 0.000137879 Jy
! Total flux subtracted in 200 components = 0.000137879 Jy
! Clean residual min=-0.001630 max=0.001659 Jy/beam
! Clean residual mean=0.000002 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.250887 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.250887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058486Jy  sigma=1.296336
! Fit after  self-cal, rms=0.058486Jy  sigma=1.296319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.14837e-05 Jy
! Component: 100  -  total flux cleaned = -3.49518e-05 Jy
! Component: 150  -  total flux cleaned = 1.23677e-05 Jy
! Component: 200  -  total flux cleaned = 5.71631e-05 Jy
! Total flux subtracted in 200 components = 5.71631e-05 Jy
! Clean residual min=-0.001612 max=0.001657 Jy/beam
! Clean residual mean=0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.250944 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 119 components and 0.250944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058476Jy  sigma=1.296161
! Fit after  self-cal, rms=0.058476Jy  sigma=1.296157
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058476Jy  sigma=1.296157
! Fit after  self-cal, rms=0.058469Jy  sigma=1.296106
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.09 mas, bmaj=8.882 mas, bpa=-15.3 degrees
! Estimated noise=0.4676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242739 Jy
! Component: 100  -  total flux cleaned = 0.000277403 Jy
! Component: 150  -  total flux cleaned = 0.000306053 Jy
! Component: 200  -  total flux cleaned = 0.000329439 Jy
! Total flux subtracted in 200 components = 0.000329439 Jy
! Clean residual min=-0.001542 max=0.001511 Jy/beam
! Clean residual mean=0.000005 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.251274 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 127 components and 0.251274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058467Jy  sigma=1.296080
! Fit after  self-cal, rms=0.058467Jy  sigma=1.296060
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.5319e-05 Jy
! Component: 100  -  total flux cleaned = 6.63132e-05 Jy
! Component: 150  -  total flux cleaned = 8.41903e-05 Jy
! Component: 200  -  total flux cleaned = 0.000100999 Jy
! Total flux subtracted in 200 components = 0.000100999 Jy
! Clean residual min=-0.001510 max=0.001470 Jy/beam
! Clean residual mean=0.000005 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.251375 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 137 components and 0.251375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058467Jy  sigma=1.296083
! Fit after  self-cal, rms=0.058467Jy  sigma=1.296076
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.63 mas, bmaj=5.459 mas, bpa=-12.09 degrees
! Estimated noise=0.371438 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.63 x 5.459 at -12.09 degrees (North through East)
! Clean map  min=-0.0015712  max=0.17914 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.984 mas, bmaj=4.706 mas, bpa=-13.51 degrees
! Estimated noise=0.548266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141113 Jy
! Component: 100  -  total flux cleaned = 0.192353 Jy
! Component: 150  -  total flux cleaned = 0.215799 Jy
! Component: 200  -  total flux cleaned = 0.22818 Jy
! Total flux subtracted in 200 components = 0.22818 Jy
! Clean residual min=-0.003683 max=0.006001 Jy/beam
! Clean residual mean=-0.000002 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.22818 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.22818 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.63 mas, bmaj=5.459 mas, bpa=-12.09 degrees
! Estimated noise=0.371438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00817347 Jy
! Component: 100  -  total flux cleaned = 0.0125071 Jy
! Component: 150  -  total flux cleaned = 0.015188 Jy
! Component: 200  -  total flux cleaned = 0.0171085 Jy
! Total flux subtracted in 200 components = 0.0171085 Jy
! Clean residual min=-0.001872 max=0.001855 Jy/beam
! Clean residual mean=0.000002 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.245288 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.245288 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.09 mas, bmaj=8.882 mas, bpa=-15.3 degrees
! Estimated noise=0.4676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205676 Jy
! Component: 100  -  total flux cleaned = 0.00328265 Jy
! Component: 150  -  total flux cleaned = 0.00414755 Jy
! Component: 200  -  total flux cleaned = 0.00477575 Jy
! Total flux subtracted in 200 components = 0.00477575 Jy
! Clean residual min=-0.001465 max=0.001582 Jy/beam
! Clean residual mean=0.000005 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.250064 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000278866 Jy
! Component: 100  -  total flux cleaned = 0.000485572 Jy
! Component: 150  -  total flux cleaned = 0.00068354 Jy
! Component: 200  -  total flux cleaned = 0.000808007 Jy
! Total flux subtracted in 200 components = 0.000808007 Jy
! Clean residual min=-0.001450 max=0.001529 Jy/beam
! Clean residual mean=0.000005 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.250872 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 78 components and 0.250872 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.63 mas, bmaj=5.459 mas, bpa=-12.09 degrees
! Estimated noise=0.371438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000485829 Jy
! Component: 100  -  total flux cleaned = -0.000423444 Jy
! Component: 150  -  total flux cleaned = -0.000337941 Jy
! Component: 200  -  total flux cleaned = -0.000311478 Jy
! Total flux subtracted in 200 components = -0.000311478 Jy
! Clean residual min=-0.001725 max=0.001569 Jy/beam
! Clean residual mean=0.000003 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.250561 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 96 components and 0.250561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058515Jy  sigma=1.296915
! Fit after  self-cal, rms=0.058506Jy  sigma=1.296780
wmodel J0013+4636_S_map.mod
! Writing 96 model components to file: J0013+4636_S_map.mod
wobs   J0013+4636_S_uvs.fits
! Writing UV FITS file: J0013+4636_S_uvs.fits
wwins  J0013+4636_S_map.win
! wwins: Wrote 4 windows to J0013+4636_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000605068 Jy
! Component: 100  -  total flux cleaned = -0.000604286 Jy
! Component: 150  -  total flux cleaned = -0.000576399 Jy
! Component: 200  -  total flux cleaned = -0.000577073 Jy
! Component: 250  -  total flux cleaned = -0.000525346 Jy
! Component: 300  -  total flux cleaned = -0.00047389 Jy
! Component: 350  -  total flux cleaned = -0.000399873 Jy
! Component: 400  -  total flux cleaned = -0.000400473 Jy
! Component: 450  -  total flux cleaned = -0.00037653 Jy
! Component: 500  -  total flux cleaned = -0.0003303 Jy
! Component: 550  -  total flux cleaned = -0.000353752 Jy
! Component: 600  -  total flux cleaned = -0.000444365 Jy
! Component: 650  -  total flux cleaned = -0.000399818 Jy
! Component: 700  -  total flux cleaned = -0.00046571 Jy
! Component: 750  -  total flux cleaned = -0.000486959 Jy
! Component: 800  -  total flux cleaned = -0.000465958 Jy
! Component: 850  -  total flux cleaned = -0.000529121 Jy
! Component: 900  -  total flux cleaned = -0.000570474 Jy
! Component: 950  -  total flux cleaned = -0.000509267 Jy
! Component: 1000  -  total flux cleaned = -0.000590023 Jy
! Component: 1050  -  total flux cleaned = -0.000629805 Jy
! Component: 1100  -  total flux cleaned = -0.000649335 Jy
! Component: 1150  -  total flux cleaned = -0.000649274 Jy
! Component: 1200  -  total flux cleaned = -0.000630275 Jy
! Component: 1250  -  total flux cleaned = -0.000649463 Jy
! Component: 1300  -  total flux cleaned = -0.000724496 Jy
! Component: 1350  -  total flux cleaned = -0.000705868 Jy
! Component: 1400  -  total flux cleaned = -0.000669502 Jy
! Component: 1450  -  total flux cleaned = -0.000705869 Jy
! Component: 1500  -  total flux cleaned = -0.000723938 Jy
! Component: 1550  -  total flux cleaned = -0.000741435 Jy
! Component: 1600  -  total flux cleaned = -0.000828818 Jy
! Component: 1650  -  total flux cleaned = -0.000776793 Jy
! Component: 1700  -  total flux cleaned = -0.000776679 Jy
! Component: 1750  -  total flux cleaned = -0.000776407 Jy
! Component: 1800  -  total flux cleaned = -0.000759544 Jy
! Component: 1850  -  total flux cleaned = -0.000776033 Jy
! Component: 1900  -  total flux cleaned = -0.000726389 Jy
! Component: 1950  -  total flux cleaned = -0.000726341 Jy
! Component: 2000  -  total flux cleaned = -0.000774884 Jy
! Component: 2050  -  total flux cleaned = -0.000695004 Jy
! Component: 2100  -  total flux cleaned = -0.000758699 Jy
! Component: 2150  -  total flux cleaned = -0.000758501 Jy
! Component: 2200  -  total flux cleaned = -0.000711571 Jy
! Component: 2250  -  total flux cleaned = -0.000727025 Jy
! Component: 2300  -  total flux cleaned = -0.00071184 Jy
! Component: 2350  -  total flux cleaned = -0.000742355 Jy
! Component: 2400  -  total flux cleaned = -0.000727337 Jy
! Component: 2450  -  total flux cleaned = -0.000742195 Jy
! Component: 2500  -  total flux cleaned = -0.000727176 Jy
! Component: 2550  -  total flux cleaned = -0.000697719 Jy
! Component: 2600  -  total flux cleaned = -0.000697913 Jy
! Component: 2650  -  total flux cleaned = -0.000697865 Jy
! Component: 2700  -  total flux cleaned = -0.000669197 Jy
! Component: 2750  -  total flux cleaned = -0.000726329 Jy
! Component: 2800  -  total flux cleaned = -0.000712152 Jy
! Component: 2850  -  total flux cleaned = -0.00065596 Jy
! Component: 2900  -  total flux cleaned = -0.000697676 Jy
! Component: 2950  -  total flux cleaned = -0.000711515 Jy
! Component: 3000  -  total flux cleaned = -0.000711473 Jy
! Component: 3050  -  total flux cleaned = -0.000724985 Jy
! Component: 3100  -  total flux cleaned = -0.000697738 Jy
! Component: 3150  -  total flux cleaned = -0.000657455 Jy
! Component: 3200  -  total flux cleaned = -0.000617348 Jy
! Component: 3250  -  total flux cleaned = -0.000670379 Jy
! Component: 3300  -  total flux cleaned = -0.000643968 Jy
! Component: 3350  -  total flux cleaned = -0.000656914 Jy
! Component: 3400  -  total flux cleaned = -0.0006179 Jy
! Component: 3450  -  total flux cleaned = -0.000592099 Jy
! Component: 3500  -  total flux cleaned = -0.000553803 Jy
! Component: 3550  -  total flux cleaned = -0.000477541 Jy
! Component: 3600  -  total flux cleaned = -0.000477572 Jy
! Component: 3650  -  total flux cleaned = -0.000440017 Jy
! Component: 3700  -  total flux cleaned = -0.000415099 Jy
! Component: 3750  -  total flux cleaned = -0.000365567 Jy
! Component: 3800  -  total flux cleaned = -0.000341046 Jy
! Component: 3850  -  total flux cleaned = -0.000304341 Jy
! Component: 3900  -  total flux cleaned = -0.000316494 Jy
! Component: 3950  -  total flux cleaned = -0.000280171 Jy
! Component: 4000  -  total flux cleaned = -0.000232043 Jy
! Component: 4050  -  total flux cleaned = -0.000220093 Jy
! Total flux subtracted in 4096 components = -0.000219974 Jy
! Clean residual min=-0.000834 max=0.000698 Jy/beam
! Clean residual mean=0.000001 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.250341 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 380 components and 0.250341 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0013+4636_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.63 x 5.459 at -12.09 degrees (North through East)
! Clean map  min=-0.0013636  max=0.17918 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0013+4636_S_map.fits
wmodel /vlbi/uf001/uva//J0013+4636_S_map.mod
! Writing 380 model components to file: /vlbi/uf001/uva//J0013+4636_S_map.mod
wobs   /vlbi/uf001/uva//J0013+4636_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0013+4636_S_uvs.fits
wwins  /vlbi/uf001/uva//J0013+4636_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0013+4636_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.179179 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212037 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.355014 0.355014 0.710028 1.42006 2.84011 5.68023 11.3605 22.7209 45.4418 90.8836
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.179 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  845.036 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0013+4636_S_dfm.log closed on Sun Jan 13 20:29:45 2019