! Started logfile: /vlbi/uf001/uvm//J0013+4051_X_a_dfm.log on Sun Jan 13 20:22:14 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0013+4051_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0013+4051_X_a_uvm.fits ! AN table 1: 7 integrations on 6 of 6 possible baselines. ! AN table 2: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.700041 visibilities/baseline/integration-bin. ! Found source: J0013+4051 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 20388 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0013+4051_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.164014Jy sigma=20.239991 ! Fit after self-cal, rms=0.470106Jy sigma=7.859439 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.736 mas, bmaj=1.22 mas, bpa=5.603 degrees ! Estimated noise=0.454513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.413465 Jy ! Component: 100 - total flux cleaned = 0.52988 Jy ! Total flux subtracted in 100 components = 0.52988 Jy ! Clean residual min=-0.018157 max=0.049015 Jy/beam ! Clean residual mean=0.000011 rms=0.003299 Jy/beam ! Combined flux in latest and established models = 0.52988 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.52988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169955Jy sigma=2.712275 ! Fit after self-cal, rms=0.169777Jy sigma=2.709950 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520133 Jy ! Component: 100 - total flux cleaned = 0.0764225 Jy ! Total flux subtracted in 100 components = 0.0764225 Jy ! Clean residual min=-0.015993 max=0.023299 Jy/beam ! Clean residual mean=0.000010 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 0.606303 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.606303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.152594Jy sigma=2.289631 ! Fit after self-cal, rms=0.152403Jy sigma=2.286441 ! Inverting map ! Added new window around map position (-1, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215375 Jy ! Component: 100 - total flux cleaned = 0.031586 Jy ! Total flux subtracted in 100 components = 0.031586 Jy ! Clean residual min=-0.013759 max=0.016335 Jy/beam ! Clean residual mean=0.000008 rms=0.002595 Jy/beam ! Combined flux in latest and established models = 0.637889 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.637889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149761Jy sigma=2.216351 ! Fit after self-cal, rms=0.149542Jy sigma=2.211840 ! Inverting map ! Added new window around map position (-1.8, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139854 Jy ! Component: 100 - total flux cleaned = 0.0180269 Jy ! Total flux subtracted in 100 components = 0.0180269 Jy ! Clean residual min=-0.013105 max=0.015842 Jy/beam ! Clean residual mean=0.000007 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.655916 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.655916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148124Jy sigma=2.180734 ! Fit after self-cal, rms=0.148020Jy sigma=2.178520 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9716 mas, bmaj=1.61 mas, bpa=6.749 degrees ! Estimated noise=0.303729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102583 Jy ! Component: 100 - total flux cleaned = 0.0122997 Jy ! Component: 150 - total flux cleaned = 0.012296 Jy ! Component: 200 - total flux cleaned = 0.0125094 Jy ! Total flux subtracted in 200 components = 0.0125094 Jy ! Clean residual min=-0.012060 max=0.013384 Jy/beam ! Clean residual mean=0.000006 rms=0.002662 Jy/beam ! Combined flux in latest and established models = 0.668425 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.668425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147328Jy sigma=2.153554 ! Fit after self-cal, rms=0.147289Jy sigma=2.152782 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9716 x 1.61 at 6.749 degrees (North through East) ! Clean map min=-0.011413 max=0.55719 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 HN 1.01 NL 1.11 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.01 HN 0.90 KP 1.00 ! LA 1.06 MK 1.07 NL 1.03 OV 0.92 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 HN 0.97 NL 1.17 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 0.91 KP 1.00 ! LA 1.05 MK 1.07 NL 1.02 OV 0.92 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 HN 1.02 NL 1.13 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 0.92 KP 1.01 ! LA 1.06 MK 1.05 NL 1.01 OV 0.91 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 HN 0.94 NL 1.18 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.02 HN 0.92 KP 1.00 ! LA 1.05 MK 1.07 NL 1.02 OV 0.93 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 HN 0.99 NL 1.16 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.01 HN 0.91 KP 1.00 ! LA 1.06 MK 1.06 NL 1.02 OV 0.91 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 HN 0.99 NL 1.13 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.01 HN 0.92 KP 1.00 ! LA 1.06 MK 1.05 NL 1.01 OV 0.91 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 0.95 NL 1.18 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.03 HN 0.90 KP 1.01 ! LA 1.05 MK 1.06 NL 1.02 OV 0.91 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 HN 0.96 NL 1.17 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 0.91 KP 0.99 ! LA 1.05 MK 1.05 NL 1.01 OV 0.92 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 0.97 NL 1.16 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.01 HN 0.91 KP 0.99 ! LA 1.05 MK 1.05 NL 1.02 OV 0.91 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 HN 0.97 NL 1.18 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 0.91 KP 0.99 ! LA 1.05 MK 1.05 NL 1.03 OV 0.91 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 HN 1.00 NL 1.07 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 0.91 KP 1.00 ! LA 1.05 MK 1.02 NL 1.02 OV 0.91 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 HN 0.99 NL 1.13 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.02 HN 0.91 KP 1.00 ! LA 1.06 MK 1.03 NL 1.02 OV 0.91 ! PT 0.92 SC 0.94 ! ! ! Fit before self-cal, rms=0.147289Jy sigma=2.152782 ! Fit after self-cal, rms=0.137903Jy sigma=1.961224 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9708 mas, bmaj=1.613 mas, bpa=6.935 degrees ! Estimated noise=0.299033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00859508 Jy ! Component: 100 - total flux cleaned = -0.0142975 Jy ! Component: 150 - total flux cleaned = -0.017655 Jy ! Component: 200 - total flux cleaned = -0.0187429 Jy ! Total flux subtracted in 200 components = -0.0187429 Jy ! Clean residual min=-0.008372 max=0.011172 Jy/beam ! Clean residual mean=0.000021 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.649682 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.649682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136668Jy sigma=1.956138 ! Fit after self-cal, rms=0.136665Jy sigma=1.955372 ! Inverting map ! Added new window around map position (13.4, -48.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112204 Jy ! Component: 100 - total flux cleaned = 0.0164706 Jy ! Component: 150 - total flux cleaned = 0.0163141 Jy ! Component: 200 - total flux cleaned = 0.0158027 Jy ! Total flux subtracted in 200 components = 0.0158027 Jy ! Clean residual min=-0.008946 max=0.010341 Jy/beam ! Clean residual mean=0.000014 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.665485 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.665485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135261Jy sigma=1.938999 ! Fit after self-cal, rms=0.135149Jy sigma=1.936227 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135149Jy sigma=1.936227 ! Fit after self-cal, rms=0.180795Jy sigma=1.307278 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9758 mas, bmaj=1.611 mas, bpa=7.527 degrees ! Estimated noise=0.30115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00332191 Jy ! Component: 100 - total flux cleaned = -0.00519801 Jy ! Component: 150 - total flux cleaned = -0.00655663 Jy ! Component: 200 - total flux cleaned = -0.00696806 Jy ! Total flux subtracted in 200 components = -0.00696806 Jy ! Clean residual min=-0.003453 max=0.003465 Jy/beam ! Clean residual mean=-0.000001 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.658517 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.658517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.180562Jy sigma=1.296875 ! Fit after self-cal, rms=0.181046Jy sigma=1.294887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (39.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374498 Jy ! Component: 100 - total flux cleaned = 2.06139e-05 Jy ! Component: 150 - total flux cleaned = -0.00050413 Jy ! Component: 200 - total flux cleaned = -0.000968412 Jy ! Total flux subtracted in 200 components = -0.000968412 Jy ! Clean residual min=-0.003367 max=0.002938 Jy/beam ! Clean residual mean=0.000000 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.657548 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 106 components and 0.657548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.180911Jy sigma=1.289240 ! Fit after self-cal, rms=0.180924Jy sigma=1.288895 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.180924Jy sigma=1.288895 ! Fit after self-cal, rms=0.184257Jy sigma=1.264216 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9754 mas, bmaj=1.61 mas, bpa=7.621 degrees ! Estimated noise=0.3016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000683428 Jy ! Component: 100 - total flux cleaned = -0.00194389 Jy ! Component: 150 - total flux cleaned = -0.00241376 Jy ! Component: 200 - total flux cleaned = -0.00255513 Jy ! Total flux subtracted in 200 components = -0.00255513 Jy ! Clean residual min=-0.002688 max=0.002433 Jy/beam ! Clean residual mean=-0.000000 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.654993 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 0.654993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184177Jy sigma=1.260391 ! Fit after self-cal, rms=0.184186Jy sigma=1.259987 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379091 Jy ! Component: 100 - total flux cleaned = -0.000723604 Jy ! Component: 150 - total flux cleaned = -0.000848698 Jy ! Component: 200 - total flux cleaned = -0.000848065 Jy ! Total flux subtracted in 200 components = -0.000848065 Jy ! Clean residual min=-0.002644 max=0.002412 Jy/beam ! Clean residual mean=0.000000 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.654145 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 119 components and 0.654145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184152Jy sigma=1.258097 ! Fit after self-cal, rms=0.184162Jy sigma=1.257949 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184162Jy sigma=1.257949 ! Fit after self-cal, rms=0.185885Jy sigma=1.245863 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.138 mas, bmaj=2.544 mas, bpa=9.077 degrees ! Estimated noise=0.38427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.20527e-05 Jy ! Component: 100 - total flux cleaned = 5.7133e-05 Jy ! Component: 150 - total flux cleaned = 5.7566e-05 Jy ! Component: 200 - total flux cleaned = -3.42962e-05 Jy ! Total flux subtracted in 200 components = -3.42962e-05 Jy ! Clean residual min=-0.003096 max=0.002156 Jy/beam ! Clean residual mean=-0.000001 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.654111 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 0.654111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185864Jy sigma=1.244851 ! Fit after self-cal, rms=0.185867Jy sigma=1.244735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215702 Jy ! Component: 100 - total flux cleaned = -0.000174129 Jy ! Component: 150 - total flux cleaned = -0.000212416 Jy ! Component: 200 - total flux cleaned = -0.000247123 Jy ! Total flux subtracted in 200 components = -0.000247123 Jy ! Clean residual min=-0.002982 max=0.002105 Jy/beam ! Clean residual mean=0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.653864 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 152 components and 0.653864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185853Jy sigma=1.244281 ! Fit after self-cal, rms=0.185855Jy sigma=1.244239 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9752 mas, bmaj=1.608 mas, bpa=7.665 degrees ! Estimated noise=0.30186 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9752 x 1.608 at 7.665 degrees (North through East) ! Clean map min=-0.0026862 max=0.55265 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185855Jy sigma=1.244239 ! Fit after self-cal, rms=0.246773Jy sigma=0.931442 ! Inverting map and beam ! Estimated beam: bmin=0.976 mas, bmaj=1.608 mas, bpa=7.611 degrees ! Estimated noise=0.302127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383202 Jy ! Component: 100 - total flux cleaned = -0.000572825 Jy ! Component: 150 - total flux cleaned = -0.000626373 Jy ! Component: 200 - total flux cleaned = -0.000575793 Jy ! Total flux subtracted in 200 components = -0.000575793 Jy ! Clean residual min=-0.001896 max=0.001614 Jy/beam ! Clean residual mean=0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.653288 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 159 components and 0.653288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246748Jy sigma=0.929220 ! Fit after self-cal, rms=0.246755Jy sigma=0.929040 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224561 Jy ! Component: 100 - total flux cleaned = -0.000223535 Jy ! Component: 150 - total flux cleaned = -0.000178501 Jy ! Component: 200 - total flux cleaned = -0.000178091 Jy ! Total flux subtracted in 200 components = -0.000178091 Jy ! Clean residual min=-0.001874 max=0.001569 Jy/beam ! Clean residual mean=0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.65311 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 166 components and 0.65311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246741Jy sigma=0.927704 ! Fit after self-cal, rms=0.246746Jy sigma=0.927611 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246746Jy sigma=0.927611 ! Fit after self-cal, rms=0.247764Jy sigma=0.927351 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7413 mas, bmaj=1.213 mas, bpa=6.589 degrees ! Estimated noise=0.45299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.411528 Jy ! Component: 100 - total flux cleaned = 0.531499 Jy ! Component: 150 - total flux cleaned = 0.585468 Jy ! Component: 200 - total flux cleaned = 0.612349 Jy ! Total flux subtracted in 200 components = 0.612349 Jy ! Clean residual min=-0.004668 max=0.013414 Jy/beam ! Clean residual mean=0.000003 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.612349 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.612349 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9759 mas, bmaj=1.607 mas, bpa=7.628 degrees ! Estimated noise=0.30236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193253 Jy ! Component: 100 - total flux cleaned = 0.0287678 Jy ! Component: 150 - total flux cleaned = 0.0338823 Jy ! Component: 200 - total flux cleaned = 0.0370448 Jy ! Total flux subtracted in 200 components = 0.0370448 Jy ! Clean residual min=-0.001803 max=0.001855 Jy/beam ! Clean residual mean=0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.649393 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.649393 Jy ! Inverting map ! Added new window around map position (-1.4, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149478 Jy ! Component: 100 - total flux cleaned = 0.00228124 Jy ! Component: 150 - total flux cleaned = 0.00277473 Jy ! Component: 200 - total flux cleaned = 0.00316568 Jy ! Total flux subtracted in 200 components = 0.00316568 Jy ! Clean residual min=-0.001812 max=0.001487 Jy/beam ! Clean residual mean=0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.652559 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 46 components and 0.652559 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.137 mas, bmaj=2.543 mas, bpa=8.992 degrees ! Estimated noise=0.384942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000540255 Jy ! Component: 100 - total flux cleaned = 0.00106223 Jy ! Component: 150 - total flux cleaned = 0.00144394 Jy ! Component: 200 - total flux cleaned = 0.00164922 Jy ! Total flux subtracted in 200 components = 0.00164922 Jy ! Clean residual min=-0.001600 max=0.001404 Jy/beam ! Clean residual mean=0.000005 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.654208 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143733 Jy ! Component: 100 - total flux cleaned = 0.000273456 Jy ! Component: 150 - total flux cleaned = 0.000362454 Jy ! Component: 200 - total flux cleaned = 0.000444778 Jy ! Total flux subtracted in 200 components = 0.000444778 Jy ! Clean residual min=-0.001598 max=0.001361 Jy/beam ! Clean residual mean=0.000005 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.654653 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 102 components and 0.654653 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9759 mas, bmaj=1.607 mas, bpa=7.628 degrees ! Estimated noise=0.30236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115615 Jy ! Component: 100 - total flux cleaned = 0.000217185 Jy ! Component: 150 - total flux cleaned = 0.000357761 Jy ! Component: 200 - total flux cleaned = 0.000485783 Jy ! Total flux subtracted in 200 components = 0.000485783 Jy ! Clean residual min=-0.001744 max=0.001356 Jy/beam ! Clean residual mean=0.000002 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.655139 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.655139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.247685Jy sigma=0.925756 ! Fit after self-cal, rms=0.247683Jy sigma=0.924428 wmodel J0013+4051_X_a_map.mod ! Writing 111 model components to file: J0013+4051_X_a_map.mod wobs J0013+4051_X_a_uvs.fits ! Writing UV FITS file: J0013+4051_X_a_uvs.fits wwins J0013+4051_X_a_map.win ! wwins: Wrote 6 windows to J0013+4051_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000818548 Jy ! Component: 100 - total flux cleaned = -0.00150828 Jy ! Component: 150 - total flux cleaned = -0.00184139 Jy ! Component: 200 - total flux cleaned = -0.00196421 Jy ! Component: 250 - total flux cleaned = -0.00203536 Jy ! Component: 300 - total flux cleaned = -0.00210434 Jy ! Component: 350 - total flux cleaned = -0.00219493 Jy ! Component: 400 - total flux cleaned = -0.00226115 Jy ! Component: 450 - total flux cleaned = -0.00223886 Jy ! Component: 500 - total flux cleaned = -0.00232545 Jy ! Component: 550 - total flux cleaned = -0.00238979 Jy ! Component: 600 - total flux cleaned = -0.00245282 Jy ! Component: 650 - total flux cleaned = -0.00241127 Jy ! Component: 700 - total flux cleaned = -0.0024733 Jy ! Component: 750 - total flux cleaned = -0.0024735 Jy ! Component: 800 - total flux cleaned = -0.00253425 Jy ! Component: 850 - total flux cleaned = -0.00253447 Jy ! Component: 900 - total flux cleaned = -0.0025939 Jy ! Component: 950 - total flux cleaned = -0.00263318 Jy ! Component: 1000 - total flux cleaned = -0.00263325 Jy ! Component: 1050 - total flux cleaned = -0.00272991 Jy ! Component: 1100 - total flux cleaned = -0.00274934 Jy ! Component: 1150 - total flux cleaned = -0.00280637 Jy ! Component: 1200 - total flux cleaned = -0.00284426 Jy ! Component: 1250 - total flux cleaned = -0.00293793 Jy ! Component: 1300 - total flux cleaned = -0.00299354 Jy ! Component: 1350 - total flux cleaned = -0.00301191 Jy ! Component: 1400 - total flux cleaned = -0.00304854 Jy ! Component: 1450 - total flux cleaned = -0.00299385 Jy ! Component: 1500 - total flux cleaned = -0.00303017 Jy ! Component: 1550 - total flux cleaned = -0.00310227 Jy ! Component: 1600 - total flux cleaned = -0.0031557 Jy ! Component: 1650 - total flux cleaned = -0.00312 Jy ! Component: 1700 - total flux cleaned = -0.0031024 Jy ! Component: 1750 - total flux cleaned = -0.0031551 Jy ! Component: 1800 - total flux cleaned = -0.00308536 Jy ! Component: 1850 - total flux cleaned = -0.00318973 Jy ! Component: 1900 - total flux cleaned = -0.00310323 Jy ! Component: 1950 - total flux cleaned = -0.00312029 Jy ! Component: 2000 - total flux cleaned = -0.00312033 Jy ! Component: 2050 - total flux cleaned = -0.00306911 Jy ! Component: 2100 - total flux cleaned = -0.00306912 Jy ! Component: 2150 - total flux cleaned = -0.00301846 Jy ! Component: 2200 - total flux cleaned = -0.00310255 Jy ! Component: 2250 - total flux cleaned = -0.00306902 Jy ! Component: 2300 - total flux cleaned = -0.00303561 Jy ! Component: 2350 - total flux cleaned = -0.00301888 Jy ! Component: 2400 - total flux cleaned = -0.00300239 Jy ! Component: 2450 - total flux cleaned = -0.00298588 Jy ! Component: 2500 - total flux cleaned = -0.00300225 Jy ! Component: 2550 - total flux cleaned = -0.00293688 Jy ! Component: 2600 - total flux cleaned = -0.00296936 Jy ! Component: 2650 - total flux cleaned = -0.00292076 Jy ! Component: 2700 - total flux cleaned = -0.00293678 Jy ! Component: 2750 - total flux cleaned = -0.00285634 Jy ! Component: 2800 - total flux cleaned = -0.00290452 Jy ! Component: 2850 - total flux cleaned = -0.00287252 Jy ! Component: 2900 - total flux cleaned = -0.0028088 Jy ! Component: 2950 - total flux cleaned = -0.00282467 Jy ! Component: 3000 - total flux cleaned = -0.00277718 Jy ! Component: 3050 - total flux cleaned = -0.00279292 Jy ! Component: 3100 - total flux cleaned = -0.0027772 Jy ! Component: 3150 - total flux cleaned = -0.00271469 Jy ! Component: 3200 - total flux cleaned = -0.00268349 Jy ! Component: 3250 - total flux cleaned = -0.00269893 Jy ! Component: 3300 - total flux cleaned = -0.00265258 Jy ! Component: 3350 - total flux cleaned = -0.00268336 Jy ! Component: 3400 - total flux cleaned = -0.00271415 Jy ! Component: 3450 - total flux cleaned = -0.00272945 Jy ! Component: 3500 - total flux cleaned = -0.00272951 Jy ! Component: 3550 - total flux cleaned = -0.00276005 Jy ! Component: 3600 - total flux cleaned = -0.00268403 Jy ! Component: 3650 - total flux cleaned = -0.00275973 Jy ! Component: 3700 - total flux cleaned = -0.00277474 Jy ! Component: 3750 - total flux cleaned = -0.0027748 Jy ! Component: 3800 - total flux cleaned = -0.00265471 Jy ! Component: 3850 - total flux cleaned = -0.00280429 Jy ! Component: 3900 - total flux cleaned = -0.00274465 Jy ! Component: 3950 - total flux cleaned = -0.00275953 Jy ! Component: 4000 - total flux cleaned = -0.00275952 Jy ! Component: 4050 - total flux cleaned = -0.00280379 Jy ! Total flux subtracted in 4096 components = -0.00280381 Jy ! Clean residual min=-0.000906 max=0.000927 Jy/beam ! Clean residual mean=0.000002 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.652335 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 418 components and 0.652335 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0013+4051_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9759 x 1.607 at 7.628 degrees (North through East) ! Clean map min=-0.0019174 max=0.5541 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0013+4051_X_a_map.fits wmodel /vlbi/uf001/uvm//J0013+4051_X_a_map.mod ! Writing 418 model components to file: /vlbi/uf001/uvm//J0013+4051_X_a_map.mod wobs /vlbi/uf001/uvm//J0013+4051_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0013+4051_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0013+4051_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J0013+4051_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.554104 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025275 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.136843 0.136843 0.273685 0.547371 1.09474 2.18948 4.37897 8.75793 17.5159 35.0317 70.0635 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.554 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2192.3 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0013+4051_X_a_dfm.log closed on Sun Jan 13 20:22:19 2019