! Started logfile: /vlbi/uf001/uva//J0010-4153_S_b_dfm.log on Sun Jan 13 20:27:51 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0010-4153_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0010-4153_S_b_uva.fits
! AN table 1: 148 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.735843 visibilities/baseline/integration-bin.
! Found source: J0010-4153
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6861 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0010-4153_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 172 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 172 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 172 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.642515Jy  sigma=15.622580
! Fit after  self-cal, rms=0.787172Jy  sigma=7.251464
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.469 mas, bmaj=15.64 mas, bpa=-24.59 degrees
! Estimated noise=1.4292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.503072 Jy
! Component: 100  -  total flux cleaned = 0.757866 Jy
! Total flux subtracted in 100 components = 0.757866 Jy
! Clean residual min=-0.100626 max=0.134375 Jy/beam
! Clean residual mean=-0.001700 rms=0.034353 Jy/beam
! Combined flux in latest and established models = 0.757867 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.757867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.796864Jy  sigma=6.182484
! Fit after  self-cal, rms=0.795649Jy  sigma=6.178231
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.113 mas, bmaj=18.35 mas, bpa=-24.08 degrees
! Estimated noise=0.838004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.333781 Jy
! Component: 100  -  total flux cleaned = 0.520141 Jy
! Component: 150  -  total flux cleaned = 0.636478 Jy
! Component: 200  -  total flux cleaned = 0.712884 Jy
! Total flux subtracted in 200 components = 0.712884 Jy
! Clean residual min=-0.144237 max=0.147597 Jy/beam
! Clean residual mean=-0.002041 rms=0.053303 Jy/beam
! Combined flux in latest and established models = 1.47075 Jy
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 117 components and 1.47075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.557343Jy  sigma=4.508215
! Fit after  self-cal, rms=0.554833Jy  sigma=4.488675
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.113 x 18.35 at -24.08 degrees (North through East)
! Clean map  min=-0.14138  max=0.71095 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.23     KP        0.88     LA        0.85     MK        1.05     
!   NL        1.08     OV        0.93     PT        1.14     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.25     KP        0.92     LA        0.88     MK        1.08     
!   NL        1.18     OV        0.82     PT        1.17     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     KP        1.09     LA        0.77     MK        1.03     
!   NL        1.25     OV        1.05     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.554833Jy  sigma=4.488675
! Fit after  self-cal, rms=0.487317Jy  sigma=4.043604
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.173 mas, bmaj=18.31 mas, bpa=-23.87 degrees
! Estimated noise=0.845335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0453907 Jy
! Component: 100  -  total flux cleaned = 0.0695628 Jy
! Component: 150  -  total flux cleaned = 0.0751774 Jy
! Component: 200  -  total flux cleaned = 0.0777416 Jy
! Total flux subtracted in 200 components = 0.0777416 Jy
! Clean residual min=-0.132681 max=0.140091 Jy/beam
! Clean residual mean=-0.000964 rms=0.045471 Jy/beam
! Combined flux in latest and established models = 1.54849 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 134 components and 1.54849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.477542Jy  sigma=4.028253
! Fit after  self-cal, rms=0.478509Jy  sigma=4.019302
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.478509Jy  sigma=4.019302
! Fit after  self-cal, rms=0.475092Jy  sigma=3.500224
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.175 mas, bmaj=18.17 mas, bpa=-23.65 degrees
! Estimated noise=0.859701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0263467 Jy
! Component: 100  -  total flux cleaned = 0.0390307 Jy
! Component: 150  -  total flux cleaned = 0.0430762 Jy
! Component: 200  -  total flux cleaned = 0.046308 Jy
! Total flux subtracted in 200 components = 0.046308 Jy
! Clean residual min=-0.120846 max=0.135414 Jy/beam
! Clean residual mean=-0.001506 rms=0.038880 Jy/beam
! Combined flux in latest and established models = 1.5948 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 150 components and 1.5948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.471667Jy  sigma=3.492115
! Fit after  self-cal, rms=0.472520Jy  sigma=3.489291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109808 Jy
! Component: 100  -  total flux cleaned = 0.00482616 Jy
! Component: 150  -  total flux cleaned = 0.00776589 Jy
! Component: 200  -  total flux cleaned = 0.0100603 Jy
! Total flux subtracted in 200 components = 0.0100603 Jy
! Clean residual min=-0.120856 max=0.134682 Jy/beam
! Clean residual mean=-0.001477 rms=0.038803 Jy/beam
! Combined flux in latest and established models = 1.60486 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 155 components and 1.60486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.471193Jy  sigma=3.487126
! Fit after  self-cal, rms=0.471689Jy  sigma=3.485542
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.471689Jy  sigma=3.485542
! Fit after  self-cal, rms=0.480655Jy  sigma=3.477718
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.175 mas, bmaj=18.17 mas, bpa=-23.62 degrees
! Estimated noise=0.869683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222766 Jy
! Component: 100  -  total flux cleaned = 0.0341904 Jy
! Component: 150  -  total flux cleaned = 0.0380807 Jy
! Component: 200  -  total flux cleaned = 0.0411883 Jy
! Total flux subtracted in 200 components = 0.0411883 Jy
! Clean residual min=-0.124233 max=0.134998 Jy/beam
! Clean residual mean=-0.001545 rms=0.039168 Jy/beam
! Combined flux in latest and established models = 1.64605 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 166 components and 1.64605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.477812Jy  sigma=3.473407
! Fit after  self-cal, rms=0.478332Jy  sigma=3.472060
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168159 Jy
! Component: 100  -  total flux cleaned = 0.00523045 Jy
! Component: 150  -  total flux cleaned = 0.00805874 Jy
! Component: 200  -  total flux cleaned = 0.00992903 Jy
! Total flux subtracted in 200 components = 0.00992903 Jy
! Clean residual min=-0.124579 max=0.134337 Jy/beam
! Clean residual mean=-0.001509 rms=0.039079 Jy/beam
! Combined flux in latest and established models = 1.65598 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 168 components and 1.65598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.477117Jy  sigma=3.470351
! Fit after  self-cal, rms=0.477530Jy  sigma=3.469211
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.477530Jy  sigma=3.469211
! Fit after  self-cal, rms=0.485983Jy  sigma=3.462546
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.64 mas, bmaj=38.88 mas, bpa=-13.29 degrees
! Estimated noise=1.21176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0449558 Jy
! Component: 100  -  total flux cleaned = 0.0588059 Jy
! Component: 150  -  total flux cleaned = 0.0623739 Jy
! Component: 200  -  total flux cleaned = 0.0655441 Jy
! Total flux subtracted in 200 components = 0.0655441 Jy
! Clean residual min=-0.185337 max=0.229443 Jy/beam
! Clean residual mean=-0.002769 rms=0.068675 Jy/beam
! Combined flux in latest and established models = 1.72152 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 169 components and 1.72152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.483060Jy  sigma=3.475666
! Fit after  self-cal, rms=0.484431Jy  sigma=3.471723
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000451629 Jy
! Component: 100  -  total flux cleaned = 0.00238584 Jy
! Component: 150  -  total flux cleaned = 0.00482463 Jy
! Component: 200  -  total flux cleaned = 0.00649824 Jy
! Total flux subtracted in 200 components = 0.00649824 Jy
! Clean residual min=-0.184837 max=0.228479 Jy/beam
! Clean residual mean=-0.002754 rms=0.068621 Jy/beam
! Combined flux in latest and established models = 1.72802 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 170 components and 1.72802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.482658Jy  sigma=3.477805
! Fit after  self-cal, rms=0.483828Jy  sigma=3.474862
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.179 mas, bmaj=18.19 mas, bpa=-23.66 degrees
! Estimated noise=0.880787 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.179 x 18.19 at -23.66 degrees (North through East)
! Clean map  min=-0.12749  max=0.71685 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.483828Jy  sigma=3.474862
! Fit after  self-cal, rms=0.493571Jy  sigma=3.417213
! Inverting map and beam 
! Estimated beam: bmin=3.228 mas, bmaj=18.44 mas, bpa=-23.21 degrees
! Estimated noise=0.902481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224952 Jy
! Component: 100  -  total flux cleaned = 0.0277774 Jy
! Component: 150  -  total flux cleaned = 0.0322392 Jy
! Component: 200  -  total flux cleaned = 0.0348714 Jy
! Total flux subtracted in 200 components = 0.0348714 Jy
! Clean residual min=-0.133285 max=0.137363 Jy/beam
! Clean residual mean=-0.001624 rms=0.040280 Jy/beam
! Combined flux in latest and established models = 1.76289 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 179 components and 1.76289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.490878Jy  sigma=3.412951
! Fit after  self-cal, rms=0.491241Jy  sigma=3.411081
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000974943 Jy
! Component: 100  -  total flux cleaned = 0.00285097 Jy
! Component: 150  -  total flux cleaned = 0.00370938 Jy
! Component: 200  -  total flux cleaned = 0.00489672 Jy
! Total flux subtracted in 200 components = 0.00489672 Jy
! Clean residual min=-0.135091 max=0.136997 Jy/beam
! Clean residual mean=-0.001598 rms=0.040170 Jy/beam
! Combined flux in latest and established models = 1.76779 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 186 components and 1.76779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.490049Jy  sigma=3.407606
! Fit after  self-cal, rms=0.490498Jy  sigma=3.406410
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.490498Jy  sigma=3.406410
! Fit after  self-cal, rms=0.497975Jy  sigma=3.401552
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=15.46 mas, bpa=-23.9 degrees
! Estimated noise=1.60242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.554937 Jy
! Component: 100  -  total flux cleaned = 0.830956 Jy
! Component: 150  -  total flux cleaned = 1.01716 Jy
! Component: 200  -  total flux cleaned = 1.15512 Jy
! Total flux subtracted in 200 components = 1.15512 Jy
! Clean residual min=-0.098496 max=0.091024 Jy/beam
! Clean residual mean=-0.001570 rms=0.029147 Jy/beam
! Combined flux in latest and established models = 1.15512 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 74 model components to the UV plane model.
! The established model now contains 74 components and 1.15512 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=18.47 mas, bpa=-23.31 degrees
! Estimated noise=0.915477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.212717 Jy
! Component: 100  -  total flux cleaned = 0.346276 Jy
! Component: 150  -  total flux cleaned = 0.43508 Jy
! Component: 200  -  total flux cleaned = 0.495623 Jy
! Total flux subtracted in 200 components = 0.495623 Jy
! Clean residual min=-0.138925 max=0.130117 Jy/beam
! Clean residual mean=-0.002043 rms=0.042412 Jy/beam
! Combined flux in latest and established models = 1.65074 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 138 components and 1.65074 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.592 mas, bmaj=39.79 mas, bpa=-12.84 degrees
! Estimated noise=1.23429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0780726 Jy
! Component: 100  -  total flux cleaned = 0.119164 Jy
! Component: 150  -  total flux cleaned = 0.136044 Jy
! Component: 200  -  total flux cleaned = 0.139944 Jy
! Total flux subtracted in 200 components = 0.139944 Jy
! Clean residual min=-0.189742 max=0.227429 Jy/beam
! Clean residual mean=-0.002983 rms=0.070188 Jy/beam
! Combined flux in latest and established models = 1.79068 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367284 Jy
! Component: 100  -  total flux cleaned = 0.00647839 Jy
! Component: 150  -  total flux cleaned = 0.00906475 Jy
! Component: 200  -  total flux cleaned = 0.0116117 Jy
! Total flux subtracted in 200 components = 0.0116117 Jy
! Clean residual min=-0.189630 max=0.227551 Jy/beam
! Clean residual mean=-0.002902 rms=0.069797 Jy/beam
! Combined flux in latest and established models = 1.8023 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 161 components and 1.8023 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=18.47 mas, bpa=-23.31 degrees
! Estimated noise=0.915477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00784449 Jy
! Component: 100  -  total flux cleaned = -0.0102025 Jy
! Component: 150  -  total flux cleaned = -0.00929868 Jy
! Component: 200  -  total flux cleaned = -0.00869402 Jy
! Total flux subtracted in 200 components = -0.00869402 Jy
! Clean residual min=-0.135424 max=0.136016 Jy/beam
! Clean residual mean=-0.001584 rms=0.040985 Jy/beam
! Combined flux in latest and established models = 1.7936 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 172 components and 1.7936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.495488Jy  sigma=3.417183
! Fit after  self-cal, rms=0.497102Jy  sigma=3.403664
wmodel J0010-4153_S_b_map.mod
! Writing 172 model components to file: J0010-4153_S_b_map.mod
wobs   J0010-4153_S_b_uvs.fits
! Writing UV FITS file: J0010-4153_S_b_uvs.fits
wwins  J0010-4153_S_b_map.win
! wwins: Wrote 1 windows to J0010-4153_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118398 Jy
! Component: 100  -  total flux cleaned = 0.0375709 Jy
! Component: 150  -  total flux cleaned = 0.0664451 Jy
! Component: 200  -  total flux cleaned = 0.0860134 Jy
! Component: 250  -  total flux cleaned = 0.102738 Jy
! Component: 300  -  total flux cleaned = 0.12331 Jy
! Component: 350  -  total flux cleaned = 0.138418 Jy
! Component: 400  -  total flux cleaned = 0.15278 Jy
! Component: 450  -  total flux cleaned = 0.162408 Jy
! Component: 500  -  total flux cleaned = 0.170326 Jy
! Component: 550  -  total flux cleaned = 0.176688 Jy
! Component: 600  -  total flux cleaned = 0.184062 Jy
! Component: 650  -  total flux cleaned = 0.188743 Jy
! Component: 700  -  total flux cleaned = 0.193222 Jy
! Component: 750  -  total flux cleaned = 0.195365 Jy
! Component: 800  -  total flux cleaned = 0.199549 Jy
! Component: 850  -  total flux cleaned = 0.199554 Jy
! Component: 900  -  total flux cleaned = 0.199583 Jy
! Component: 950  -  total flux cleaned = 0.200534 Jy
! Component: 1000  -  total flux cleaned = 0.200527 Jy
! Component: 1050  -  total flux cleaned = 0.20142 Jy
! Component: 1100  -  total flux cleaned = 0.203144 Jy
! Component: 1150  -  total flux cleaned = 0.20732 Jy
! Component: 1200  -  total flux cleaned = 0.209728 Jy
! Component: 1250  -  total flux cleaned = 0.21211 Jy
! Component: 1300  -  total flux cleaned = 0.218277 Jy
! Component: 1350  -  total flux cleaned = 0.222788 Jy
! Component: 1400  -  total flux cleaned = 0.227886 Jy
! Component: 1450  -  total flux cleaned = 0.232854 Jy
! Component: 1500  -  total flux cleaned = 0.235627 Jy
! Component: 1550  -  total flux cleaned = 0.239016 Jy
! Component: 1600  -  total flux cleaned = 0.243642 Jy
! Component: 1650  -  total flux cleaned = 0.246865 Jy
! Component: 1700  -  total flux cleaned = 0.250005 Jy
! Component: 1750  -  total flux cleaned = 0.252458 Jy
! Component: 1800  -  total flux cleaned = 0.256658 Jy
! Component: 1850  -  total flux cleaned = 0.259586 Jy
! Component: 1900  -  total flux cleaned = 0.264183 Jy
! Component: 1950  -  total flux cleaned = 0.269243 Jy
! Component: 2000  -  total flux cleaned = 0.273098 Jy
! Component: 2050  -  total flux cleaned = 0.277957 Jy
! Component: 2100  -  total flux cleaned = 0.282714 Jy
! Component: 2150  -  total flux cleaned = 0.287381 Jy
! Component: 2200  -  total flux cleaned = 0.291452 Jy
! Component: 2250  -  total flux cleaned = 0.295945 Jy
! Component: 2300  -  total flux cleaned = 0.300353 Jy
! Component: 2350  -  total flux cleaned = 0.303722 Jy
! Component: 2400  -  total flux cleaned = 0.307043 Jy
! Component: 2450  -  total flux cleaned = 0.310779 Jy
! Component: 2500  -  total flux cleaned = 0.313536 Jy
! Component: 2550  -  total flux cleaned = 0.31671 Jy
! Component: 2600  -  total flux cleaned = 0.319392 Jy
! Component: 2650  -  total flux cleaned = 0.321596 Jy
! Component: 2700  -  total flux cleaned = 0.323766 Jy
! Component: 2750  -  total flux cleaned = 0.325475 Jy
! Component: 2800  -  total flux cleaned = 0.326747 Jy
! Component: 2850  -  total flux cleaned = 0.328003 Jy
! Component: 2900  -  total flux cleaned = 0.329668 Jy
! Component: 2950  -  total flux cleaned = 0.330491 Jy
! Component: 3000  -  total flux cleaned = 0.331719 Jy
! Component: 3050  -  total flux cleaned = 0.333737 Jy
! Component: 3100  -  total flux cleaned = 0.334535 Jy
! Component: 3150  -  total flux cleaned = 0.335723 Jy
! Component: 3200  -  total flux cleaned = 0.337294 Jy
! Component: 3250  -  total flux cleaned = 0.338072 Jy
! Component: 3300  -  total flux cleaned = 0.339615 Jy
! Component: 3350  -  total flux cleaned = 0.339998 Jy
! Component: 3400  -  total flux cleaned = 0.341139 Jy
! Component: 3450  -  total flux cleaned = 0.34114 Jy
! Component: 3500  -  total flux cleaned = 0.341889 Jy
! Component: 3550  -  total flux cleaned = 0.341144 Jy
! Component: 3600  -  total flux cleaned = 0.341514 Jy
! Component: 3650  -  total flux cleaned = 0.341512 Jy
! Component: 3700  -  total flux cleaned = 0.340779 Jy
! Component: 3750  -  total flux cleaned = 0.340778 Jy
! Component: 3800  -  total flux cleaned = 0.340778 Jy
! Component: 3850  -  total flux cleaned = 0.340416 Jy
! Component: 3900  -  total flux cleaned = 0.340415 Jy
! Component: 3950  -  total flux cleaned = 0.340056 Jy
! Component: 4000  -  total flux cleaned = 0.339698 Jy
! Component: 4050  -  total flux cleaned = 0.340411 Jy
! Total flux subtracted in 4096 components = 0.340053 Jy
! Clean residual min=-0.020157 max=0.023924 Jy/beam
! Clean residual mean=0.000034 rms=0.008317 Jy/beam
! Combined flux in latest and established models = 2.13365 Jy
keep
! Adding 732 model components to the UV plane model.
! The established model now contains 903 components and 2.13366 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0010-4153_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.238 x 18.47 at -23.31 degrees (North through East)
! Clean map  min=-0.10199  max=0.74892 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0010-4153_S_b_map.fits
wmodel /vlbi/uf001/uva//J0010-4153_S_b_map.mod
! Writing 903 model components to file: /vlbi/uf001/uva//J0010-4153_S_b_map.mod
wobs   /vlbi/uf001/uva//J0010-4153_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0010-4153_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0010-4153_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0010-4153_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.748921 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00795479 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.1865 3.1865 6.373 12.746 25.492 50.984
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0238 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.748 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  94.147 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0010-4153_S_b_dfm.log closed on Sun Jan 13 20:27:56 2019