! Started logfile: /vlbi/uf001/uvm//J0010-4153_S_a_dfm.log on Sun Jan 13 20:21:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J0010-4153_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0010-4153_S_a_uvm.fits ! AN table 1: 37 integrations on 28 of 28 possible baselines. ! AN table 2: 72 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.841052 visibilities/baseline/integration-bin. ! Found source: J0010-4153 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6429 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0010-4153_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.455693Jy sigma=14.898590 ! Fit after self-cal, rms=0.738738Jy sigma=7.667149 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.245 mas, bmaj=6.932 mas, bpa=-3.134 degrees ! Estimated noise=1.33842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.427519 Jy ! Component: 100 - total flux cleaned = 0.640624 Jy ! Total flux subtracted in 100 components = 0.640624 Jy ! Clean residual min=-0.075842 max=0.132620 Jy/beam ! Clean residual mean=-0.000807 rms=0.023358 Jy/beam ! Combined flux in latest and established models = 0.640624 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.640624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.694148Jy sigma=5.862023 ! Fit after self-cal, rms=0.693403Jy sigma=5.857591 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.664 mas, bmaj=7.849 mas, bpa=-1.948 degrees ! Estimated noise=0.814794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.274634 Jy ! Component: 100 - total flux cleaned = 0.428769 Jy ! Component: 150 - total flux cleaned = 0.517712 Jy ! Component: 200 - total flux cleaned = 0.569534 Jy ! Total flux subtracted in 200 components = 0.569534 Jy ! Clean residual min=-0.096660 max=0.166623 Jy/beam ! Clean residual mean=-0.002701 rms=0.034377 Jy/beam ! Combined flux in latest and established models = 1.21016 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 1.21016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.520525Jy sigma=4.590363 ! Fit after self-cal, rms=0.519991Jy sigma=4.581556 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.664 x 7.849 at -1.948 degrees (North through East) ! Clean map min=-0.097212 max=0.58554 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.81 KP 1.49 LA 0.73 MK 1.31 ! NL 1.47 OV 1.03 PT 0.70 SC 1.27 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.68 LA 0.90 MK 1.20 NL 1.88 ! OV 1.61 PT 0.80 SC 1.43 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.80 KP 1.51 LA 0.75 MK 1.40 ! NL 1.59 OV 1.12 PT 0.61 SC 1.24 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.68 LA 0.96 MK 1.08 NL 2.04 ! OV 1.63 PT 0.84 SC 1.47 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.81 KP 1.38 LA 0.70 MK 1.29 ! NL 1.64 OV 1.17 PT 0.61 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.68 LA 0.95 MK 1.10 NL 2.21 ! OV 1.59 PT 0.86 SC 0.93 ! ! ! Fit before self-cal, rms=0.519991Jy sigma=4.581556 ! Fit after self-cal, rms=0.410915Jy sigma=3.047859 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=8.249 mas, bpa=-1.476 degrees ! Estimated noise=0.870803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00990995 Jy ! Component: 100 - total flux cleaned = 0.0064757 Jy ! Component: 150 - total flux cleaned = 0.0035823 Jy ! Component: 200 - total flux cleaned = 0.00107105 Jy ! Total flux subtracted in 200 components = 0.00107105 Jy ! Clean residual min=-0.073359 max=0.104410 Jy/beam ! Clean residual mean=-0.001232 rms=0.021091 Jy/beam ! Combined flux in latest and established models = 1.21123 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 1.21123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.406893Jy sigma=3.032439 ! Fit after self-cal, rms=0.418007Jy sigma=2.965275 ! Inverting map ! Added new window around map position (10, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0820254 Jy ! Component: 100 - total flux cleaned = 0.0862811 Jy ! Component: 150 - total flux cleaned = 0.0887432 Jy ! Component: 200 - total flux cleaned = 0.090891 Jy ! Total flux subtracted in 200 components = 0.090891 Jy ! Clean residual min=-0.068734 max=0.078775 Jy/beam ! Clean residual mean=-0.001130 rms=0.018427 Jy/beam ! Combined flux in latest and established models = 1.30212 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 1.30212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.390635Jy sigma=2.754754 ! Fit after self-cal, rms=0.388025Jy sigma=2.717576 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.388025Jy sigma=2.717576 ! Fit after self-cal, rms=0.365365Jy sigma=2.654233 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=8.073 mas, bpa=-1.213 degrees ! Estimated noise=0.842424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362108 Jy ! Component: 100 - total flux cleaned = 0.0386841 Jy ! Component: 150 - total flux cleaned = 0.0400635 Jy ! Component: 200 - total flux cleaned = 0.0413416 Jy ! Total flux subtracted in 200 components = 0.0413416 Jy ! Clean residual min=-0.056440 max=0.076928 Jy/beam ! Clean residual mean=-0.000408 rms=0.016762 Jy/beam ! Combined flux in latest and established models = 1.34346 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 1.34346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.358506Jy sigma=2.606950 ! Fit after self-cal, rms=0.358438Jy sigma=2.600539 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-65.5, 127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0718713 Jy ! Component: 100 - total flux cleaned = 0.106799 Jy ! Component: 150 - total flux cleaned = 0.129996 Jy ! Component: 200 - total flux cleaned = 0.144475 Jy ! Total flux subtracted in 200 components = 0.144475 Jy ! Clean residual min=-0.050301 max=0.057159 Jy/beam ! Clean residual mean=-0.000313 rms=0.015223 Jy/beam ! Combined flux in latest and established models = 1.48794 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 141 components and 1.48794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.337114Jy sigma=2.422243 ! Fit after self-cal, rms=0.334291Jy sigma=2.392431 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.334291Jy sigma=2.392431 ! Fit after self-cal, rms=0.305422Jy sigma=2.335985 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.997 mas, bpa=-1.737 degrees ! Estimated noise=0.824458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321515 Jy ! Component: 100 - total flux cleaned = 0.053053 Jy ! Component: 150 - total flux cleaned = 0.0597175 Jy ! Component: 200 - total flux cleaned = 0.062686 Jy ! Total flux subtracted in 200 components = 0.062686 Jy ! Clean residual min=-0.044314 max=0.057991 Jy/beam ! Clean residual mean=0.000078 rms=0.013708 Jy/beam ! Combined flux in latest and established models = 1.55062 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 160 components and 1.55062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.299318Jy sigma=2.284453 ! Fit after self-cal, rms=0.299088Jy sigma=2.279521 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (106.5, -62). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569602 Jy ! Component: 100 - total flux cleaned = 0.0810523 Jy ! Component: 150 - total flux cleaned = 0.0855298 Jy ! Component: 200 - total flux cleaned = 0.0893738 Jy ! Total flux subtracted in 200 components = 0.0893738 Jy ! Clean residual min=-0.042667 max=0.050004 Jy/beam ! Clean residual mean=-0.000311 rms=0.012603 Jy/beam ! Combined flux in latest and established models = 1.64 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 204 components and 1.64 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.281462Jy sigma=2.163710 ! Fit after self-cal, rms=0.278393Jy sigma=2.143437 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.278393Jy sigma=2.143437 ! Fit after self-cal, rms=0.265982Jy sigma=2.103875 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.315 mas, bmaj=25.13 mas, bpa=4.856 degrees ! Estimated noise=1.1772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421404 Jy ! Component: 100 - total flux cleaned = 0.0499749 Jy ! Component: 150 - total flux cleaned = 0.0533019 Jy ! Component: 200 - total flux cleaned = 0.0555119 Jy ! Total flux subtracted in 200 components = 0.0555119 Jy ! Clean residual min=-0.069401 max=0.084221 Jy/beam ! Clean residual mean=-0.000623 rms=0.022226 Jy/beam ! Combined flux in latest and established models = 1.69551 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 222 components and 1.69551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.259414Jy sigma=2.087814 ! Fit after self-cal, rms=0.259086Jy sigma=2.080523 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103563 Jy ! Component: 100 - total flux cleaned = 0.0103536 Jy ! Component: 150 - total flux cleaned = 0.0109647 Jy ! Component: 200 - total flux cleaned = 0.0114901 Jy ! Total flux subtracted in 200 components = 0.0114901 Jy ! Clean residual min=-0.070319 max=0.083952 Jy/beam ! Clean residual mean=-0.000533 rms=0.022022 Jy/beam ! Combined flux in latest and established models = 1.707 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 225 components and 1.707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.256490Jy sigma=2.085577 ! Fit after self-cal, rms=0.256813Jy sigma=2.083931 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=8.003 mas, bpa=-1.483 degrees ! Estimated noise=0.816691 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.775 x 8.003 at -1.483 degrees (North through East) ! Clean map min=-0.042424 max=0.64219 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.256813Jy sigma=2.083931 ! Fit after self-cal, rms=0.256793Jy sigma=2.021833 ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=8.068 mas, bpa=-1.556 degrees ! Estimated noise=0.826934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527118 Jy ! Component: 100 - total flux cleaned = 0.00581639 Jy ! Component: 150 - total flux cleaned = 0.00630594 Jy ! Component: 200 - total flux cleaned = 0.00763439 Jy ! Total flux subtracted in 200 components = 0.00763439 Jy ! Clean residual min=-0.045589 max=0.048736 Jy/beam ! Clean residual mean=-0.000240 rms=0.011879 Jy/beam ! Combined flux in latest and established models = 1.71463 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 241 components and 1.71463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.253246Jy sigma=1.996614 ! Fit after self-cal, rms=0.252880Jy sigma=1.994157 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017306 Jy ! Component: 100 - total flux cleaned = 0.0024942 Jy ! Component: 150 - total flux cleaned = 0.00318075 Jy ! Component: 200 - total flux cleaned = 0.0031866 Jy ! Total flux subtracted in 200 components = 0.0031866 Jy ! Clean residual min=-0.046152 max=0.048434 Jy/beam ! Clean residual mean=-0.000227 rms=0.011813 Jy/beam ! Combined flux in latest and established models = 1.71782 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 255 components and 1.71782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.251370Jy sigma=1.985439 ! Fit after self-cal, rms=0.251430Jy sigma=1.984952 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.251430Jy sigma=1.984952 ! Fit after self-cal, rms=0.251543Jy sigma=1.979276 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=6.967 mas, bpa=-2.376 degrees ! Estimated noise=1.43414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.451309 Jy ! Component: 100 - total flux cleaned = 0.670192 Jy ! Component: 150 - total flux cleaned = 0.819394 Jy ! Component: 200 - total flux cleaned = 0.933124 Jy ! Total flux subtracted in 200 components = 0.933124 Jy ! Clean residual min=-0.063022 max=0.093234 Jy/beam ! Clean residual mean=-0.000180 rms=0.018202 Jy/beam ! Combined flux in latest and established models = 0.933125 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.933125 Jy ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=8.07 mas, bpa=-1.423 degrees ! Estimated noise=0.825742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143478 Jy ! Component: 100 - total flux cleaned = 0.246698 Jy ! Component: 150 - total flux cleaned = 0.330678 Jy ! Component: 200 - total flux cleaned = 0.400368 Jy ! Total flux subtracted in 200 components = 0.400368 Jy ! Clean residual min=-0.051812 max=0.076007 Jy/beam ! Clean residual mean=-0.000172 rms=0.016880 Jy/beam ! Combined flux in latest and established models = 1.33349 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 91 components and 1.33349 Jy ! Inverting map ! Added new window around map position (94, 101). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735276 Jy ! Component: 100 - total flux cleaned = 0.124067 Jy ! Component: 150 - total flux cleaned = 0.166817 Jy ! Component: 200 - total flux cleaned = 0.203782 Jy ! Total flux subtracted in 200 components = 0.203782 Jy ! Clean residual min=-0.046554 max=0.051116 Jy/beam ! Clean residual mean=-0.000460 rms=0.012962 Jy/beam ! Combined flux in latest and established models = 1.53727 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 137 components and 1.53727 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.386 mas, bmaj=25.46 mas, bpa=4.947 degrees ! Estimated noise=1.17114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0603134 Jy ! Component: 100 - total flux cleaned = 0.105604 Jy ! Component: 150 - total flux cleaned = 0.140277 Jy ! Component: 200 - total flux cleaned = 0.164417 Jy ! Total flux subtracted in 200 components = 0.164417 Jy ! Clean residual min=-0.078565 max=0.075684 Jy/beam ! Clean residual mean=-0.001400 rms=0.021322 Jy/beam ! Combined flux in latest and established models = 1.70169 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00919803 Jy ! Component: 100 - total flux cleaned = 0.0140977 Jy ! Component: 150 - total flux cleaned = 0.0178434 Jy ! Component: 200 - total flux cleaned = 0.0206664 Jy ! Total flux subtracted in 200 components = 0.0206664 Jy ! Clean residual min=-0.078481 max=0.076853 Jy/beam ! Clean residual mean=-0.001405 rms=0.020854 Jy/beam ! Combined flux in latest and established models = 1.72236 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 177 components and 1.72236 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=8.07 mas, bpa=-1.423 degrees ! Estimated noise=0.825742 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279751 Jy ! Component: 100 - total flux cleaned = 0.00972615 Jy ! Component: 150 - total flux cleaned = 0.0156549 Jy ! Component: 200 - total flux cleaned = 0.0179023 Jy ! Total flux subtracted in 200 components = 0.0179023 Jy ! Clean residual min=-0.045101 max=0.047043 Jy/beam ! Clean residual mean=-0.000571 rms=0.011873 Jy/beam ! Combined flux in latest and established models = 1.74026 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 201 components and 1.74026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.247126Jy sigma=2.009652 ! Fit after self-cal, rms=0.246622Jy sigma=1.977320 wmodel J0010-4153_S_a_map.mod ! Writing 201 model components to file: J0010-4153_S_a_map.mod wobs J0010-4153_S_a_uvs.fits ! Writing UV FITS file: J0010-4153_S_a_uvs.fits wwins J0010-4153_S_a_map.win ! wwins: Wrote 6 windows to J0010-4153_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00314951 Jy ! Component: 100 - total flux cleaned = -0.000983491 Jy ! Component: 150 - total flux cleaned = 0.00107639 Jy ! Component: 200 - total flux cleaned = 0.0017311 Jy ! Component: 250 - total flux cleaned = 0.00234822 Jy ! Component: 300 - total flux cleaned = 0.00293964 Jy ! Component: 350 - total flux cleaned = 0.00235912 Jy ! Component: 400 - total flux cleaned = 0.0023457 Jy ! Component: 450 - total flux cleaned = 0.00181722 Jy ! Component: 500 - total flux cleaned = 0.00183457 Jy ! Component: 550 - total flux cleaned = 0.00233609 Jy ! Component: 600 - total flux cleaned = 0.00233271 Jy ! Component: 650 - total flux cleaned = 0.000471431 Jy ! Component: 700 - total flux cleaned = 0.000481375 Jy ! Component: 750 - total flux cleaned = 2.78394e-05 Jy ! Component: 800 - total flux cleaned = -0.00169448 Jy ! Component: 850 - total flux cleaned = -0.00252259 Jy ! Component: 900 - total flux cleaned = -0.00170034 Jy ! Component: 950 - total flux cleaned = -0.00250099 Jy ! Component: 1000 - total flux cleaned = -0.00211293 Jy ! Component: 1050 - total flux cleaned = -0.00174044 Jy ! Component: 1100 - total flux cleaned = -0.00248774 Jy ! Component: 1150 - total flux cleaned = -0.00248784 Jy ! Component: 1200 - total flux cleaned = -0.00213493 Jy ! Component: 1250 - total flux cleaned = -0.00248236 Jy ! Component: 1300 - total flux cleaned = -0.00247929 Jy ! Component: 1350 - total flux cleaned = -0.00214243 Jy ! Component: 1400 - total flux cleaned = -0.00148426 Jy ! Component: 1450 - total flux cleaned = -0.00116471 Jy ! Component: 1500 - total flux cleaned = -0.000222246 Jy ! Component: 1550 - total flux cleaned = 0.000387077 Jy ! Component: 1600 - total flux cleaned = 7.88487e-05 Jy ! Component: 1650 - total flux cleaned = -0.000506078 Jy ! Component: 1700 - total flux cleaned = 0.00066878 Jy ! Component: 1750 - total flux cleaned = 0.000668477 Jy ! Component: 1800 - total flux cleaned = 0.000662738 Jy ! Component: 1850 - total flux cleaned = 0.000102249 Jy ! Component: 1900 - total flux cleaned = 0.000103747 Jy ! Component: 1950 - total flux cleaned = 0.000100545 Jy ! Component: 2000 - total flux cleaned = -0.000697211 Jy ! Component: 2050 - total flux cleaned = -0.000700776 Jy ! Component: 2100 - total flux cleaned = -0.00173525 Jy ! Component: 2150 - total flux cleaned = -0.00275754 Jy ! Component: 2200 - total flux cleaned = -0.00376301 Jy ! Component: 2250 - total flux cleaned = -0.00450355 Jy ! Component: 2300 - total flux cleaned = -0.00474971 Jy ! Component: 2350 - total flux cleaned = -0.00548161 Jy ! Component: 2400 - total flux cleaned = -0.00595886 Jy ! Component: 2450 - total flux cleaned = -0.00690075 Jy ! Component: 2500 - total flux cleaned = -0.00713044 Jy ! Component: 2550 - total flux cleaned = -0.00759166 Jy ! Component: 2600 - total flux cleaned = -0.00805186 Jy ! Component: 2650 - total flux cleaned = -0.00872972 Jy ! Component: 2700 - total flux cleaned = -0.00872955 Jy ! Component: 2750 - total flux cleaned = -0.00895354 Jy ! Component: 2800 - total flux cleaned = -0.00982905 Jy ! Component: 2850 - total flux cleaned = -0.00939071 Jy ! Component: 2900 - total flux cleaned = -0.00960776 Jy ! Component: 2950 - total flux cleaned = -0.0104581 Jy ! Component: 3000 - total flux cleaned = -0.0100359 Jy ! Component: 3050 - total flux cleaned = -0.0100371 Jy ! Component: 3100 - total flux cleaned = -0.0106586 Jy ! Component: 3150 - total flux cleaned = -0.0104537 Jy ! Component: 3200 - total flux cleaned = -0.0108585 Jy ! Component: 3250 - total flux cleaned = -0.0112596 Jy ! Component: 3300 - total flux cleaned = -0.0114583 Jy ! Component: 3350 - total flux cleaned = -0.0116559 Jy ! Component: 3400 - total flux cleaned = -0.0118522 Jy ! Component: 3450 - total flux cleaned = -0.0122407 Jy ! Component: 3500 - total flux cleaned = -0.0132011 Jy ! Component: 3550 - total flux cleaned = -0.0132008 Jy ! Component: 3600 - total flux cleaned = -0.0139563 Jy ! Component: 3650 - total flux cleaned = -0.0143286 Jy ! Component: 3700 - total flux cleaned = -0.0146981 Jy ! Component: 3750 - total flux cleaned = -0.0150642 Jy ! Component: 3800 - total flux cleaned = -0.0156097 Jy ! Component: 3850 - total flux cleaned = -0.0154269 Jy ! Component: 3900 - total flux cleaned = -0.016148 Jy ! Component: 3950 - total flux cleaned = -0.0166825 Jy ! Component: 4000 - total flux cleaned = -0.0168588 Jy ! Component: 4050 - total flux cleaned = -0.0173869 Jy ! Total flux subtracted in 4096 components = -0.0177373 Jy ! Clean residual min=-0.009663 max=0.010367 Jy/beam ! Clean residual mean=-0.000138 rms=0.003484 Jy/beam ! Combined flux in latest and established models = 1.72252 Jy keep ! Adding 449 model components to the UV plane model. ! The established model now contains 650 components and 1.72252 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0010-4153_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.799 x 8.07 at -1.423 degrees (North through East) ! Clean map min=-0.028325 max=0.68675 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0010-4153_S_a_map.fits wmodel /vlbi/uf001/uvm//J0010-4153_S_a_map.mod ! Writing 650 model components to file: /vlbi/uf001/uvm//J0010-4153_S_a_map.mod wobs /vlbi/uf001/uvm//J0010-4153_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0010-4153_S_a_uvs.fits wwins /vlbi/uf001/uvm//J0010-4153_S_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J0010-4153_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.686747 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00343406 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.50014 1.50014 3.00029 6.00057 12.0011 24.0023 48.0046 96.0092 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0103 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.686 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 199.98 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0010-4153_S_a_dfm.log closed on Sun Jan 13 20:21:37 2019