! Started logfile: /vlbi/uf001/uvm//J0008-3601_X_a_dfm.log on Sun Jan 13 20:21:02 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0008-3601_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0008-3601_X_a_uvm.fits ! AN table 1: 29 integrations on 21 of 21 possible baselines. ! AN table 2: 58 integrations on 36 of 36 possible baselines. ! AN table 3: 29 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.925287 visibilities/baseline/integration-bin. ! Found source: J0008-3601 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 34776 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0008-3601_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.005509Jy sigma=17.066905 ! Fit after self-cal, rms=0.952956Jy sigma=16.149897 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6532 mas, bmaj=2.389 mas, bpa=-0.332 degrees ! Estimated noise=0.549751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361275 Jy ! Component: 100 - total flux cleaned = 0.0472282 Jy ! Total flux subtracted in 100 components = 0.0472282 Jy ! Clean residual min=-0.004529 max=0.005828 Jy/beam ! Clean residual mean=0.000018 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0472282 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0472282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076444Jy sigma=1.171615 ! Fit after self-cal, rms=0.075059Jy sigma=1.147222 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064818 Jy ! Component: 100 - total flux cleaned = 0.00949352 Jy ! Total flux subtracted in 100 components = 0.00949352 Jy ! Clean residual min=-0.004202 max=0.005121 Jy/beam ! Clean residual mean=0.000016 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.0567217 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0567217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074372Jy sigma=1.131136 ! Fit after self-cal, rms=0.074353Jy sigma=1.130735 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8569 mas, bmaj=2.925 mas, bpa=-0.4128 degrees ! Estimated noise=0.252708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387187 Jy ! Component: 100 - total flux cleaned = 0.00582852 Jy ! Component: 150 - total flux cleaned = 0.00686683 Jy ! Component: 200 - total flux cleaned = 0.00719705 Jy ! Total flux subtracted in 200 components = 0.00719705 Jy ! Clean residual min=-0.003636 max=0.004502 Jy/beam ! Clean residual mean=0.000026 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.0639188 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0639188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074219Jy sigma=1.126274 ! Fit after self-cal, rms=0.074189Jy sigma=1.125380 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8569 x 2.925 at -0.4128 degrees (North through East) ! Clean map min=-0.0034716 max=0.0477 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.04 KP 0.89 LA 0.88 ! MK 1.14 NL 1.29 OV 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 0.97 HN 1.02 KP 0.89 ! LA 0.81 NL 1.60 OV 1.03 PT 1.00* ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.79 LA 0.62 MK 1.00 NL 1.38 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 KP 0.91 LA 0.90 ! MK 1.09 NL 1.40 OV 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.42 FD 1.04 HN 1.03 KP 0.91 ! LA 0.86 NL 1.49 OV 1.03 PT 1.00* ! SC 1.17 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 LA 0.60 MK 1.06 NL 1.27 ! PT 0.96 SC 1.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 KP 0.95 LA 0.79 ! MK 1.25 NL 1.36 OV 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.32 FD 1.03 HN 1.00 KP 0.91 ! LA 0.84 NL 1.33 OV 1.04 PT 1.00* ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.84 LA 0.62 MK 0.95 NL 1.44 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.01 KP 0.96 LA 0.85 ! MK 1.19 NL 1.41 OV 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.23 FD 1.08 HN 0.90 KP 0.95 ! LA 0.88 NL 1.47 OV 0.98 PT 1.00* ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 LA 0.56 MK 1.05 NL 1.47 ! PT 0.91 SC 1.27 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 KP 1.03 LA 0.85 ! MK 1.06 NL 1.36 OV 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 1.00 HN 1.06 KP 0.96 ! LA 0.91 NL 1.40 OV 0.97 PT 1.00* ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 LA 0.56 MK 1.30 NL 1.41 ! PT 1.14 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 KP 1.01 LA 0.84 ! MK 0.92 NL 1.44 OV 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 0.97 HN 0.98 KP 0.97 ! LA 0.95 NL 1.39 OV 0.97 PT 1.00* ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 LA 0.61 MK 1.12 NL 1.21 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 KP 0.90 LA 0.82 ! MK 0.99 NL 1.45 OV 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 0.92 KP 0.99 ! LA 0.92 NL 1.45 OV 0.97 PT 1.00* ! SC 1.18 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 LA 0.57 MK 1.15 NL 1.74 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.90 KP 1.02 LA 0.86 ! MK 0.90 NL 1.59 OV 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 1.01 KP 1.01 ! LA 0.91 NL 1.49 OV 0.95 PT 1.00* ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.75 LA 0.66 MK 1.00 NL 1.25 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.03 KP 1.00 LA 0.80 ! MK 1.06 NL 1.41 OV 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.00 HN 0.88 KP 0.96 ! LA 0.91 NL 1.42 OV 1.05 PT 1.00* ! SC 1.17 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 LA 0.64 MK 1.03 NL 1.41 ! PT 1.18 SC 0.79 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.10 KP 0.88 LA 0.89 ! MK 0.90 NL 1.58 OV 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.98 HN 0.82 KP 1.00 ! LA 0.91 NL 1.42 OV 0.98 PT 1.00* ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 LA 0.62 MK 0.93 NL 1.34 ! PT 1.04 SC 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.88 KP 0.97 LA 1.01 ! MK 0.86 NL 1.29 OV 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 0.81 KP 0.99 ! LA 0.86 NL 1.42 OV 1.03 PT 1.00* ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.78 LA 0.63 MK 0.82 NL 1.74 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 KP 0.97 LA 0.88 ! MK 0.70 NL 1.48 OV 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 1.01 HN 0.79 KP 1.02 ! LA 0.96 NL 1.41 OV 0.96 PT 1.00* ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 LA 0.63 MK 0.94 NL 1.20 ! PT 0.98 SC 0.90 ! ! ! Fit before self-cal, rms=0.074189Jy sigma=1.125380 ! Fit after self-cal, rms=0.077892Jy sigma=1.102040 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8579 mas, bmaj=2.874 mas, bpa=-0.7697 degrees ! Estimated noise=0.253112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888873 Jy ! Component: 100 - total flux cleaned = 0.000746417 Jy ! Component: 150 - total flux cleaned = 0.000717518 Jy ! Component: 200 - total flux cleaned = 0.000717528 Jy ! Total flux subtracted in 200 components = 0.000717528 Jy ! Clean residual min=-0.001635 max=0.001446 Jy/beam ! Clean residual mean=0.000005 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0646363 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0646363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077850Jy sigma=1.101459 ! Fit after self-cal, rms=0.078583Jy sigma=1.096801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078583Jy sigma=1.096801 ! Fit after self-cal, rms=0.081743Jy sigma=1.095326 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8641 mas, bmaj=2.898 mas, bpa=-0.9859 degrees ! Estimated noise=0.254726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422136 Jy ! Component: 100 - total flux cleaned = 0.000422959 Jy ! Component: 150 - total flux cleaned = 0.000397287 Jy ! Component: 200 - total flux cleaned = 0.000418522 Jy ! Total flux subtracted in 200 components = 0.000418522 Jy ! Clean residual min=-0.001525 max=0.001286 Jy/beam ! Clean residual mean=0.000003 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0650548 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.0650548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081719Jy sigma=1.094959 ! Fit after self-cal, rms=0.082007Jy sigma=1.094418 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107509 Jy ! Component: 100 - total flux cleaned = 0.000104939 Jy ! Component: 150 - total flux cleaned = 8.20821e-05 Jy ! Component: 200 - total flux cleaned = 6.20711e-05 Jy ! Total flux subtracted in 200 components = 6.20711e-05 Jy ! Clean residual min=-0.001470 max=0.001339 Jy/beam ! Clean residual mean=0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0651169 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.0651169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081988Jy sigma=1.094149 ! Fit after self-cal, rms=0.081994Jy sigma=1.093967 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081994Jy sigma=1.093967 ! Fit after self-cal, rms=0.084052Jy sigma=1.093295 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8703 mas, bmaj=2.934 mas, bpa=-1.053 degrees ! Estimated noise=0.255534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158435 Jy ! Component: 100 - total flux cleaned = 9.34178e-05 Jy ! Component: 150 - total flux cleaned = 5.28069e-05 Jy ! Component: 200 - total flux cleaned = 3.38636e-05 Jy ! Total flux subtracted in 200 components = 3.38636e-05 Jy ! Clean residual min=-0.001384 max=0.001340 Jy/beam ! Clean residual mean=0.000002 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0651508 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.0651508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084038Jy sigma=1.093112 ! Fit after self-cal, rms=0.084186Jy sigma=1.092880 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.88667e-05 Jy ! Component: 100 - total flux cleaned = -6.84179e-05 Jy ! Component: 150 - total flux cleaned = -8.67972e-05 Jy ! Component: 200 - total flux cleaned = -0.000103509 Jy ! Total flux subtracted in 200 components = -0.000103509 Jy ! Clean residual min=-0.001342 max=0.001343 Jy/beam ! Clean residual mean=0.000002 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0650472 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.0650473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084174Jy sigma=1.092735 ! Fit after self-cal, rms=0.084186Jy sigma=1.092641 ! Inverting map ! Added new window around map position (-0.2, -14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806038 Jy ! Component: 100 - total flux cleaned = 0.00064793 Jy ! Component: 150 - total flux cleaned = 0.000565167 Jy ! Component: 200 - total flux cleaned = 0.000515836 Jy ! Total flux subtracted in 200 components = 0.000515836 Jy ! Clean residual min=-0.001242 max=0.001271 Jy/beam ! Clean residual mean=0.000002 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.0655631 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.0655631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084153Jy sigma=1.092170 ! Fit after self-cal, rms=0.084134Jy sigma=1.092067 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084134Jy sigma=1.092067 ! Fit after self-cal, rms=0.085054Jy sigma=1.091968 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=6.703 mas, bpa=2.016 degrees ! Estimated noise=0.312517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575456 Jy ! Component: 100 - total flux cleaned = 0.000751496 Jy ! Component: 150 - total flux cleaned = 0.000885439 Jy ! Component: 200 - total flux cleaned = 0.000917669 Jy ! Total flux subtracted in 200 components = 0.000917669 Jy ! Clean residual min=-0.001332 max=0.001096 Jy/beam ! Clean residual mean=0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0664808 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.0664808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085051Jy sigma=1.091870 ! Fit after self-cal, rms=0.085132Jy sigma=1.091804 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346937 Jy ! Component: 100 - total flux cleaned = 0.000338223 Jy ! Component: 150 - total flux cleaned = 0.00034769 Jy ! Component: 200 - total flux cleaned = 0.000347428 Jy ! Total flux subtracted in 200 components = 0.000347428 Jy ! Clean residual min=-0.001316 max=0.001078 Jy/beam ! Clean residual mean=0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.0668282 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.0668282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085130Jy sigma=1.091764 ! Fit after self-cal, rms=0.085133Jy sigma=1.091757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=2.942 mas, bpa=-1.024 degrees ! Estimated noise=0.255274 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8714 x 2.942 at -1.024 degrees (North through East) ! Clean map min=-0.0026536 max=0.047371 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6622 mas, bmaj=2.398 mas, bpa=-0.554 degrees ! Estimated noise=0.568357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371023 Jy ! Component: 100 - total flux cleaned = 0.0500257 Jy ! Component: 150 - total flux cleaned = 0.0559649 Jy ! Component: 200 - total flux cleaned = 0.0590069 Jy ! Total flux subtracted in 200 components = 0.0590069 Jy ! Clean residual min=-0.003409 max=0.003480 Jy/beam ! Clean residual mean=0.000007 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.0590069 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0590069 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=2.942 mas, bpa=-1.024 degrees ! Estimated noise=0.255274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040851 Jy ! Component: 100 - total flux cleaned = 0.00522945 Jy ! Component: 150 - total flux cleaned = 0.00557479 Jy ! Component: 200 - total flux cleaned = 0.00581122 Jy ! Total flux subtracted in 200 components = 0.00581122 Jy ! Clean residual min=-0.001521 max=0.001547 Jy/beam ! Clean residual mean=0.000005 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0648181 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.0648181 Jy ! Inverting map ! Added new window around map position (7.2, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804831 Jy ! Component: 100 - total flux cleaned = 0.000894016 Jy ! Component: 150 - total flux cleaned = 0.000933613 Jy ! Component: 200 - total flux cleaned = 0.000895853 Jy ! Total flux subtracted in 200 components = 0.000895853 Jy ! Clean residual min=-0.001345 max=0.001381 Jy/beam ! Clean residual mean=0.000004 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.065714 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.065714 Jy ! Inverting map ! Added new window around map position (10, -28.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054963 Jy ! Component: 100 - total flux cleaned = 0.000445102 Jy ! Component: 150 - total flux cleaned = 0.000414634 Jy ! Component: 200 - total flux cleaned = 0.000385515 Jy ! Total flux subtracted in 200 components = 0.000385515 Jy ! Clean residual min=-0.001265 max=0.001198 Jy/beam ! Clean residual mean=0.000003 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.0660995 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 0.0660995 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=6.703 mas, bpa=2.016 degrees ! Estimated noise=0.312517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716956 Jy ! Component: 100 - total flux cleaned = 0.000911415 Jy ! Component: 150 - total flux cleaned = 0.000948599 Jy ! Component: 200 - total flux cleaned = 0.000916028 Jy ! Total flux subtracted in 200 components = 0.000916028 Jy ! Clean residual min=-0.001319 max=0.001226 Jy/beam ! Clean residual mean=0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0670155 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.96898e-05 Jy ! Component: 100 - total flux cleaned = -5.72587e-05 Jy ! Component: 150 - total flux cleaned = -0.000108313 Jy ! Component: 200 - total flux cleaned = -0.000131531 Jy ! Total flux subtracted in 200 components = -0.000131531 Jy ! Clean residual min=-0.001293 max=0.001160 Jy/beam ! Clean residual mean=0.000002 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.066884 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 101 components and 0.066884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=2.942 mas, bpa=-1.024 degrees ! Estimated noise=0.255274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017757 Jy ! Component: 100 - total flux cleaned = -0.000285353 Jy ! Component: 150 - total flux cleaned = -0.000310319 Jy ! Component: 200 - total flux cleaned = -0.000334253 Jy ! Total flux subtracted in 200 components = -0.000334253 Jy ! Clean residual min=-0.001117 max=0.001140 Jy/beam ! Clean residual mean=0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0665497 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 115 components and 0.0665497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085090Jy sigma=1.091270 ! Fit after self-cal, rms=0.085082Jy sigma=1.090962 wmodel J0008-3601_X_a_map.mod ! Writing 115 model components to file: J0008-3601_X_a_map.mod wobs J0008-3601_X_a_uvs.fits ! Writing UV FITS file: J0008-3601_X_a_uvs.fits wwins J0008-3601_X_a_map.win ! wwins: Wrote 5 windows to J0008-3601_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137187 Jy ! Component: 100 - total flux cleaned = -1.47351e-05 Jy ! Component: 150 - total flux cleaned = 6.3486e-05 Jy ! Component: 200 - total flux cleaned = 8.23582e-05 Jy ! Component: 250 - total flux cleaned = 0.000174961 Jy ! Component: 300 - total flux cleaned = 0.00031973 Jy ! Component: 350 - total flux cleaned = 0.000496714 Jy ! Component: 400 - total flux cleaned = 0.000669565 Jy ! Component: 450 - total flux cleaned = 0.00077116 Jy ! Component: 500 - total flux cleaned = 0.000821113 Jy ! Component: 550 - total flux cleaned = 0.000805086 Jy ! Component: 600 - total flux cleaned = 0.000853587 Jy ! Component: 650 - total flux cleaned = 0.000869671 Jy ! Component: 700 - total flux cleaned = 0.000885406 Jy ! Component: 750 - total flux cleaned = 0.000946654 Jy ! Component: 800 - total flux cleaned = 0.000976664 Jy ! Component: 850 - total flux cleaned = 0.000991316 Jy ! Component: 900 - total flux cleaned = 0.00100591 Jy ! Component: 950 - total flux cleaned = 0.00104924 Jy ! Component: 1000 - total flux cleaned = 0.000977555 Jy ! Component: 1050 - total flux cleaned = 0.000977455 Jy ! Component: 1100 - total flux cleaned = 0.000977287 Jy ! Component: 1150 - total flux cleaned = 0.000949524 Jy ! Component: 1200 - total flux cleaned = 0.000894668 Jy ! Component: 1250 - total flux cleaned = 0.000894738 Jy ! Component: 1300 - total flux cleaned = 0.000868265 Jy ! Component: 1350 - total flux cleaned = 0.000868374 Jy ! Component: 1400 - total flux cleaned = 0.000894817 Jy ! Component: 1450 - total flux cleaned = 0.000881448 Jy ! Component: 1500 - total flux cleaned = 0.000868559 Jy ! Component: 1550 - total flux cleaned = 0.000842799 Jy ! Component: 1600 - total flux cleaned = 0.000868103 Jy ! Component: 1650 - total flux cleaned = 0.000842848 Jy ! Component: 1700 - total flux cleaned = 0.000805509 Jy ! Component: 1750 - total flux cleaned = 0.000830462 Jy ! Component: 1800 - total flux cleaned = 0.000854921 Jy ! Component: 1850 - total flux cleaned = 0.000806114 Jy ! Component: 1900 - total flux cleaned = 0.00079416 Jy ! Component: 1950 - total flux cleaned = 0.000794202 Jy ! Component: 2000 - total flux cleaned = 0.000817999 Jy ! Component: 2050 - total flux cleaned = 0.000817997 Jy ! Component: 2100 - total flux cleaned = 0.000806316 Jy ! Component: 2150 - total flux cleaned = 0.000794688 Jy ! Component: 2200 - total flux cleaned = 0.00080637 Jy ! Component: 2250 - total flux cleaned = 0.000829381 Jy ! Component: 2300 - total flux cleaned = 0.000840741 Jy ! Component: 2350 - total flux cleaned = 0.000840862 Jy ! Component: 2400 - total flux cleaned = 0.00085205 Jy ! Component: 2450 - total flux cleaned = 0.000829884 Jy ! Component: 2500 - total flux cleaned = 0.000874028 Jy ! Component: 2550 - total flux cleaned = 0.000852109 Jy ! Component: 2600 - total flux cleaned = 0.000884589 Jy ! Component: 2650 - total flux cleaned = 0.000873728 Jy ! Component: 2700 - total flux cleaned = 0.000905936 Jy ! Component: 2750 - total flux cleaned = 0.000905753 Jy ! Component: 2800 - total flux cleaned = 0.000947965 Jy ! Component: 2850 - total flux cleaned = 0.000958411 Jy ! Component: 2900 - total flux cleaned = 0.000968877 Jy ! Component: 2950 - total flux cleaned = 0.00102052 Jy ! Component: 3000 - total flux cleaned = 0.0010103 Jy ! Component: 3050 - total flux cleaned = 0.0010205 Jy ! Component: 3100 - total flux cleaned = 0.00105087 Jy ! Component: 3150 - total flux cleaned = 0.00108111 Jy ! Component: 3200 - total flux cleaned = 0.00112106 Jy ! Component: 3250 - total flux cleaned = 0.00110113 Jy ! Component: 3300 - total flux cleaned = 0.00116042 Jy ! Component: 3350 - total flux cleaned = 0.00119961 Jy ! Component: 3400 - total flux cleaned = 0.00121912 Jy ! Component: 3450 - total flux cleaned = 0.00121918 Jy ! Component: 3500 - total flux cleaned = 0.00129648 Jy ! Component: 3550 - total flux cleaned = 0.00135391 Jy ! Component: 3600 - total flux cleaned = 0.0013444 Jy ! Component: 3650 - total flux cleaned = 0.00141076 Jy ! Component: 3700 - total flux cleaned = 0.00140128 Jy ! Component: 3750 - total flux cleaned = 0.00143881 Jy ! Component: 3800 - total flux cleaned = 0.00147611 Jy ! Component: 3850 - total flux cleaned = 0.00148521 Jy ! Component: 3900 - total flux cleaned = 0.00151285 Jy ! Component: 3950 - total flux cleaned = 0.00154961 Jy ! Component: 4000 - total flux cleaned = 0.00154043 Jy ! Component: 4050 - total flux cleaned = 0.00152226 Jy ! Total flux subtracted in 4096 components = 0.00154939 Jy ! Clean residual min=-0.000533 max=0.000611 Jy/beam ! Clean residual mean=-0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.0680991 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 423 components and 0.0680991 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0008-3601_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8714 x 2.942 at -1.024 degrees (North through East) ! Clean map min=-0.0024882 max=0.047883 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0008-3601_X_a_map.fits wmodel /vlbi/uf001/uvm//J0008-3601_X_a_map.mod ! Writing 423 model components to file: /vlbi/uf001/uvm//J0008-3601_X_a_map.mod wobs /vlbi/uf001/uvm//J0008-3601_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0008-3601_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0008-3601_X_a_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0008-3601_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0478833 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160861 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00783 1.00783 2.01566 4.03133 8.06265 16.1253 32.2506 64.5012 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.047 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 297.668 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0008-3601_X_a_dfm.log closed on Sun Jan 13 20:21:07 2019