! Started logfile: /vlbi/uf001/uva//J0008-2339_X_dfm.log on Sun Jan 13 20:25:22 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0008-2339_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0008-2339_X_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.987739 visibilities/baseline/integration-bin. ! Found source: J0008-2339 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 30936 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0008-2339_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.018066Jy sigma=21.379752 ! Fit after self-cal, rms=0.855263Jy sigma=17.822772 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6016 mas, bmaj=1.669 mas, bpa=-4.217 degrees ! Estimated noise=0.414631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107734 Jy ! Component: 100 - total flux cleaned = 0.139351 Jy ! Total flux subtracted in 100 components = 0.139351 Jy ! Clean residual min=-0.025045 max=0.068574 Jy/beam ! Clean residual mean=-0.000029 rms=0.005021 Jy/beam ! Combined flux in latest and established models = 0.139351 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.139351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125582Jy sigma=2.600253 ! Fit after self-cal, rms=0.125439Jy sigma=2.597525 ! Inverting map ! Added new window around map position (1.8, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0585373 Jy ! Component: 100 - total flux cleaned = 0.0822383 Jy ! Total flux subtracted in 100 components = 0.0822383 Jy ! Clean residual min=-0.012998 max=0.038005 Jy/beam ! Clean residual mean=-0.000017 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.221589 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.221589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093837Jy sigma=1.926308 ! Fit after self-cal, rms=0.083667Jy sigma=1.701882 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268946 Jy ! Component: 100 - total flux cleaned = 0.0387699 Jy ! Total flux subtracted in 100 components = 0.0387699 Jy ! Clean residual min=-0.007881 max=0.017376 Jy/beam ! Clean residual mean=-0.000012 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.260359 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 14 components and 0.260359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073405Jy sigma=1.460202 ! Fit after self-cal, rms=0.071855Jy sigma=1.425562 ! Inverting map ! Added new window around map position (1, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164989 Jy ! Component: 100 - total flux cleaned = 0.0226463 Jy ! Total flux subtracted in 100 components = 0.0226463 Jy ! Clean residual min=-0.006028 max=0.008899 Jy/beam ! Clean residual mean=-0.000008 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.283005 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.283005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067227Jy sigma=1.317553 ! Fit after self-cal, rms=0.067024Jy sigma=1.311819 ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702993 Jy ! Component: 100 - total flux cleaned = 0.00840712 Jy ! Total flux subtracted in 100 components = 0.00840712 Jy ! Clean residual min=-0.005180 max=0.006620 Jy/beam ! Clean residual mean=-0.000007 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.291412 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.291412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065856Jy sigma=1.285023 ! Fit after self-cal, rms=0.065719Jy sigma=1.281476 ! Inverting map ! Added new window around map position (2.8, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546702 Jy ! Component: 100 - total flux cleaned = 0.00754889 Jy ! Total flux subtracted in 100 components = 0.00754889 Jy ! Clean residual min=-0.004804 max=0.005350 Jy/beam ! Clean residual mean=-0.000006 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.298961 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.298961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064985Jy sigma=1.265929 ! Fit after self-cal, rms=0.064928Jy sigma=1.264150 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.787 mas, bmaj=2.061 mas, bpa=-3.041 degrees ! Estimated noise=0.198109 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567721 Jy ! Component: 100 - total flux cleaned = 0.00961024 Jy ! Component: 150 - total flux cleaned = 0.0125339 Jy ! Component: 200 - total flux cleaned = 0.0147564 Jy ! Total flux subtracted in 200 components = 0.0147564 Jy ! Clean residual min=-0.004447 max=0.006328 Jy/beam ! Clean residual mean=-0.000013 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.313718 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.313718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064332Jy sigma=1.249247 ! Fit after self-cal, rms=0.064308Jy sigma=1.248145 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.787 x 2.061 at -3.041 degrees (North through East) ! Clean map min=-0.0040294 max=0.13681 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.07 KP 0.99 ! LA 1.00 MK 1.00 NL 1.08 OV 0.91 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.08 KP 1.00 ! LA 1.00 MK 0.99 NL 1.09 OV 0.91 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 1.10 KP 0.98 ! LA 1.01 MK 0.99 NL 1.08 OV 0.90 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 1.05 KP 0.99 ! LA 1.00 MK 1.00 NL 1.08 OV 0.90 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.09 KP 1.00 ! LA 0.98 MK 1.01 NL 1.09 OV 0.91 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 1.05 KP 1.01 ! LA 0.98 MK 1.00 NL 1.10 OV 0.93 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.12 KP 1.02 ! LA 1.01 MK 1.02 NL 1.10 OV 0.91 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.06 HN 1.06 KP 1.01 ! LA 1.00 MK 1.02 NL 1.09 OV 0.90 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.10 KP 1.01 ! LA 1.01 MK 1.00 NL 1.10 OV 0.92 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 1.08 KP 1.01 ! LA 1.03 MK 1.01 NL 1.10 OV 0.93 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 1.00 KP 1.03 ! LA 1.02 MK 1.02 NL 1.12 OV 0.93 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.06 KP 1.01 ! LA 1.02 MK 1.04 NL 1.11 OV 0.94 ! PT 0.94 SC 1.02 ! ! ! Fit before self-cal, rms=0.064308Jy sigma=1.248145 ! Fit after self-cal, rms=0.065464Jy sigma=1.205489 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7888 mas, bmaj=2.068 mas, bpa=-2.852 degrees ! Estimated noise=0.202017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.71597e-05 Jy ! Component: 100 - total flux cleaned = 0.00025858 Jy ! Component: 150 - total flux cleaned = 0.000198915 Jy ! Component: 200 - total flux cleaned = 8.8834e-05 Jy ! Total flux subtracted in 200 components = 8.8834e-05 Jy ! Clean residual min=-0.002310 max=0.002504 Jy/beam ! Clean residual mean=-0.000001 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.313807 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.313807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065257Jy sigma=1.201174 ! Fit after self-cal, rms=0.065305Jy sigma=1.200618 ! Inverting map ! Added new window around map position (-22.8, 47.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017102 Jy ! Component: 100 - total flux cleaned = 0.00199521 Jy ! Component: 150 - total flux cleaned = 0.00209344 Jy ! Component: 200 - total flux cleaned = 0.00209308 Jy ! Total flux subtracted in 200 components = 0.00209308 Jy ! Clean residual min=-0.002129 max=0.002024 Jy/beam ! Clean residual mean=0.000000 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.3159 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 91 components and 0.3159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065197Jy sigma=1.198261 ! Fit after self-cal, rms=0.065190Jy sigma=1.198108 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065190Jy sigma=1.198108 ! Fit after self-cal, rms=0.065308Jy sigma=1.197899 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7897 mas, bmaj=2.068 mas, bpa=-2.723 degrees ! Estimated noise=0.201971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320552 Jy ! Component: 100 - total flux cleaned = -0.000230453 Jy ! Component: 150 - total flux cleaned = -0.000271258 Jy ! Component: 200 - total flux cleaned = -0.000309447 Jy ! Total flux subtracted in 200 components = -0.000309447 Jy ! Clean residual min=-0.002009 max=0.001876 Jy/beam ! Clean residual mean=0.000000 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.31559 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 98 components and 0.31559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065252Jy sigma=1.196782 ! Fit after self-cal, rms=0.065250Jy sigma=1.196734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.91461e-05 Jy ! Component: 100 - total flux cleaned = -3.81074e-06 Jy ! Component: 150 - total flux cleaned = -3.4944e-06 Jy ! Component: 200 - total flux cleaned = -6.3666e-05 Jy ! Total flux subtracted in 200 components = -6.3666e-05 Jy ! Clean residual min=-0.001917 max=0.001829 Jy/beam ! Clean residual mean=0.000000 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.315527 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.315527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065217Jy sigma=1.196110 ! Fit after self-cal, rms=0.065215Jy sigma=1.196089 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065215Jy sigma=1.196089 ! Fit after self-cal, rms=0.065548Jy sigma=1.191877 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7902 mas, bmaj=2.067 mas, bpa=-2.66 degrees ! Estimated noise=0.202092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000684941 Jy ! Component: 100 - total flux cleaned = -0.00103634 Jy ! Component: 150 - total flux cleaned = -0.00123068 Jy ! Component: 200 - total flux cleaned = -0.00140601 Jy ! Total flux subtracted in 200 components = -0.00140601 Jy ! Clean residual min=-0.001285 max=0.001435 Jy/beam ! Clean residual mean=-0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.314121 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 123 components and 0.314121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065521Jy sigma=1.191354 ! Fit after self-cal, rms=0.065525Jy sigma=1.191327 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142533 Jy ! Component: 100 - total flux cleaned = 0.00171198 Jy ! Component: 150 - total flux cleaned = 0.00171006 Jy ! Component: 200 - total flux cleaned = 0.00168603 Jy ! Total flux subtracted in 200 components = 0.00168603 Jy ! Clean residual min=-0.001252 max=0.001295 Jy/beam ! Clean residual mean=-0.000000 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.315807 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 137 components and 0.315807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065482Jy sigma=1.190541 ! Fit after self-cal, rms=0.065476Jy sigma=1.190453 ! Inverting map ! Added new window around map position (-9.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000974503 Jy ! Component: 100 - total flux cleaned = 0.00110018 Jy ! Component: 150 - total flux cleaned = 0.00123075 Jy ! Component: 200 - total flux cleaned = 0.00116072 Jy ! Total flux subtracted in 200 components = 0.00116072 Jy ! Clean residual min=-0.001216 max=0.001219 Jy/beam ! Clean residual mean=-0.000000 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.316968 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.316968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065442Jy sigma=1.189876 ! Fit after self-cal, rms=0.065440Jy sigma=1.189834 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065440Jy sigma=1.189834 ! Fit after self-cal, rms=0.065580Jy sigma=1.189776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.17 mas, bmaj=5.192 mas, bpa=3.053 degrees ! Estimated noise=0.26107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227059 Jy ! Component: 100 - total flux cleaned = -0.000476556 Jy ! Component: 150 - total flux cleaned = -0.00053268 Jy ! Component: 200 - total flux cleaned = -0.000488642 Jy ! Total flux subtracted in 200 components = -0.000488642 Jy ! Clean residual min=-0.001348 max=0.001169 Jy/beam ! Clean residual mean=-0.000002 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.316479 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 169 components and 0.316479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065572Jy sigma=1.189703 ! Fit after self-cal, rms=0.065572Jy sigma=1.189686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.0914e-05 Jy ! Component: 100 - total flux cleaned = 2.12918e-06 Jy ! Component: 150 - total flux cleaned = 4.99088e-05 Jy ! Component: 200 - total flux cleaned = 0.000115967 Jy ! Total flux subtracted in 200 components = 0.000115967 Jy ! Clean residual min=-0.001296 max=0.001086 Jy/beam ! Clean residual mean=-0.000002 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.316595 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 177 components and 0.316595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065569Jy sigma=1.189668 ! Fit after self-cal, rms=0.065568Jy sigma=1.189662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7905 mas, bmaj=2.067 mas, bpa=-2.646 degrees ! Estimated noise=0.202207 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7905 x 2.067 at -2.646 degrees (North through East) ! Clean map min=-0.0010177 max=0.1385 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6027 mas, bmaj=1.665 mas, bpa=-3.704 degrees ! Estimated noise=0.426881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124746 Jy ! Component: 100 - total flux cleaned = 0.187442 Jy ! Component: 150 - total flux cleaned = 0.224645 Jy ! Component: 200 - total flux cleaned = 0.248265 Jy ! Total flux subtracted in 200 components = 0.248265 Jy ! Clean residual min=-0.005867 max=0.012502 Jy/beam ! Clean residual mean=-0.000010 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.248265 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.248265 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7905 mas, bmaj=2.067 mas, bpa=-2.646 degrees ! Estimated noise=0.202207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218494 Jy ! Component: 100 - total flux cleaned = 0.0342814 Jy ! Component: 150 - total flux cleaned = 0.0421067 Jy ! Component: 200 - total flux cleaned = 0.047569 Jy ! Total flux subtracted in 200 components = 0.047569 Jy ! Clean residual min=-0.001968 max=0.003155 Jy/beam ! Clean residual mean=-0.000010 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.295834 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.295834 Jy ! Inverting map ! Added new window around map position (0.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039865 Jy ! Component: 100 - total flux cleaned = 0.0070207 Jy ! Component: 150 - total flux cleaned = 0.00942152 Jy ! Component: 200 - total flux cleaned = 0.0113757 Jy ! Total flux subtracted in 200 components = 0.0113757 Jy ! Clean residual min=-0.001477 max=0.001580 Jy/beam ! Clean residual mean=-0.000005 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.30721 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 74 components and 0.30721 Jy ! Inverting map ! Added new window around map position (7.6, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169127 Jy ! Component: 100 - total flux cleaned = 0.00304298 Jy ! Component: 150 - total flux cleaned = 0.00420279 Jy ! Component: 200 - total flux cleaned = 0.00505378 Jy ! Total flux subtracted in 200 components = 0.00505378 Jy ! Clean residual min=-0.001289 max=0.001244 Jy/beam ! Clean residual mean=-0.000002 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.312263 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 97 components and 0.312263 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.17 mas, bmaj=5.192 mas, bpa=3.053 degrees ! Estimated noise=0.26107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139719 Jy ! Component: 100 - total flux cleaned = 0.00235757 Jy ! Component: 150 - total flux cleaned = 0.00308092 Jy ! Component: 200 - total flux cleaned = 0.00365715 Jy ! Total flux subtracted in 200 components = 0.00365715 Jy ! Clean residual min=-0.001282 max=0.001144 Jy/beam ! Clean residual mean=-0.000002 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.315921 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329512 Jy ! Component: 100 - total flux cleaned = 0.000534091 Jy ! Component: 150 - total flux cleaned = 0.000672899 Jy ! Component: 200 - total flux cleaned = 0.000744378 Jy ! Total flux subtracted in 200 components = 0.000744378 Jy ! Clean residual min=-0.001270 max=0.001120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.316665 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 141 components and 0.316665 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7905 mas, bmaj=2.067 mas, bpa=-2.646 degrees ! Estimated noise=0.202207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269582 Jy ! Component: 100 - total flux cleaned = -0.000272615 Jy ! Component: 150 - total flux cleaned = -0.000175612 Jy ! Component: 200 - total flux cleaned = -0.000152991 Jy ! Total flux subtracted in 200 components = -0.000152991 Jy ! Clean residual min=-0.001178 max=0.001174 Jy/beam ! Clean residual mean=-0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.316512 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 157 components and 0.316512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065555Jy sigma=1.189447 ! Fit after self-cal, rms=0.065545Jy sigma=1.189250 wmodel J0008-2339_X_map.mod ! Writing 157 model components to file: J0008-2339_X_map.mod wobs J0008-2339_X_uvs.fits ! Writing UV FITS file: J0008-2339_X_uvs.fits wwins J0008-2339_X_map.win ! wwins: Wrote 11 windows to J0008-2339_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.79011e-05 Jy ! Component: 100 - total flux cleaned = -7.86452e-05 Jy ! Component: 150 - total flux cleaned = -0.000284295 Jy ! Component: 200 - total flux cleaned = -0.000415818 Jy ! Component: 250 - total flux cleaned = -0.000543121 Jy ! Component: 300 - total flux cleaned = -0.000681099 Jy ! Component: 350 - total flux cleaned = -0.000845109 Jy ! Component: 400 - total flux cleaned = -0.000976136 Jy ! Component: 450 - total flux cleaned = -0.00108987 Jy ! Component: 500 - total flux cleaned = -0.00115979 Jy ! Component: 550 - total flux cleaned = -0.00126957 Jy ! Component: 600 - total flux cleaned = -0.00137717 Jy ! Component: 650 - total flux cleaned = -0.00142976 Jy ! Component: 700 - total flux cleaned = -0.00145561 Jy ! Component: 750 - total flux cleaned = -0.00148125 Jy ! Component: 800 - total flux cleaned = -0.00151908 Jy ! Component: 850 - total flux cleaned = -0.00153156 Jy ! Component: 900 - total flux cleaned = -0.00156851 Jy ! Component: 950 - total flux cleaned = -0.00158045 Jy ! Component: 1000 - total flux cleaned = -0.00156856 Jy ! Component: 1050 - total flux cleaned = -0.00161586 Jy ! Component: 1100 - total flux cleaned = -0.00165089 Jy ! Component: 1150 - total flux cleaned = -0.00167373 Jy ! Component: 1200 - total flux cleaned = -0.0017079 Jy ! Component: 1250 - total flux cleaned = -0.00170791 Jy ! Component: 1300 - total flux cleaned = -0.00174144 Jy ! Component: 1350 - total flux cleaned = -0.0017413 Jy ! Component: 1400 - total flux cleaned = -0.00173041 Jy ! Component: 1450 - total flux cleaned = -0.00178424 Jy ! Component: 1500 - total flux cleaned = -0.00176265 Jy ! Component: 1550 - total flux cleaned = -0.00173092 Jy ! Component: 1600 - total flux cleaned = -0.00174146 Jy ! Component: 1650 - total flux cleaned = -0.00177243 Jy ! Component: 1700 - total flux cleaned = -0.00175188 Jy ! Component: 1750 - total flux cleaned = -0.00177233 Jy ! Component: 1800 - total flux cleaned = -0.00180259 Jy ! Component: 1850 - total flux cleaned = -0.00183258 Jy ! Component: 1900 - total flux cleaned = -0.00186218 Jy ! Component: 1950 - total flux cleaned = -0.00186207 Jy ! Component: 2000 - total flux cleaned = -0.00191064 Jy ! Component: 2050 - total flux cleaned = -0.00190102 Jy ! Component: 2100 - total flux cleaned = -0.00192009 Jy ! Component: 2150 - total flux cleaned = -0.00192015 Jy ! Component: 2200 - total flux cleaned = -0.00195778 Jy ! Component: 2250 - total flux cleaned = -0.00196717 Jy ! Component: 2300 - total flux cleaned = -0.00194854 Jy ! Component: 2350 - total flux cleaned = -0.00194857 Jy ! Component: 2400 - total flux cleaned = -0.00195773 Jy ! Component: 2450 - total flux cleaned = -0.00195781 Jy ! Component: 2500 - total flux cleaned = -0.0019668 Jy ! Component: 2550 - total flux cleaned = -0.00196689 Jy ! Component: 2600 - total flux cleaned = -0.00201099 Jy ! Component: 2650 - total flux cleaned = -0.00197608 Jy ! Component: 2700 - total flux cleaned = -0.00196729 Jy ! Component: 2750 - total flux cleaned = -0.00201912 Jy ! Component: 2800 - total flux cleaned = -0.00202771 Jy ! Component: 2850 - total flux cleaned = -0.00203623 Jy ! Component: 2900 - total flux cleaned = -0.00204466 Jy ! Component: 2950 - total flux cleaned = -0.00207819 Jy ! Component: 3000 - total flux cleaned = -0.00211973 Jy ! Component: 3050 - total flux cleaned = -0.00212805 Jy ! Component: 3100 - total flux cleaned = -0.00213632 Jy ! Component: 3150 - total flux cleaned = -0.00211993 Jy ! Component: 3200 - total flux cleaned = -0.00212796 Jy ! Component: 3250 - total flux cleaned = -0.00210379 Jy ! Component: 3300 - total flux cleaned = -0.00215175 Jy ! Component: 3350 - total flux cleaned = -0.00214386 Jy ! Component: 3400 - total flux cleaned = -0.00212026 Jy ! Component: 3450 - total flux cleaned = -0.00215945 Jy ! Component: 3500 - total flux cleaned = -0.00216731 Jy ! Component: 3550 - total flux cleaned = -0.00218276 Jy ! Component: 3600 - total flux cleaned = -0.00217501 Jy ! Component: 3650 - total flux cleaned = -0.00214454 Jy ! Component: 3700 - total flux cleaned = -0.00212937 Jy ! Component: 3750 - total flux cleaned = -0.00212185 Jy ! Component: 3800 - total flux cleaned = -0.00211441 Jy ! Component: 3850 - total flux cleaned = -0.00209954 Jy ! Component: 3900 - total flux cleaned = -0.00212173 Jy ! Component: 3950 - total flux cleaned = -0.0021291 Jy ! Component: 4000 - total flux cleaned = -0.00211451 Jy ! Component: 4050 - total flux cleaned = -0.00212176 Jy ! Total flux subtracted in 4096 components = -0.00212899 Jy ! Clean residual min=-0.000448 max=0.000480 Jy/beam ! Clean residual mean=0.000000 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.314383 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 448 components and 0.314383 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0008-2339_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7905 x 2.067 at -2.646 degrees (North through East) ! Clean map min=-0.00078789 max=0.1366 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0008-2339_X_map.fits wmodel /vlbi/uf001/uva//J0008-2339_X_map.mod ! Writing 448 model components to file: /vlbi/uf001/uva//J0008-2339_X_map.mod wobs /vlbi/uf001/uva//J0008-2339_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0008-2339_X_uvs.fits wwins /vlbi/uf001/uva//J0008-2339_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0008-2339_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.136604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000122252 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.268481 0.268481 0.536962 1.07392 2.14785 4.2957 8.59139 17.1828 34.3656 68.7312 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.136 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1117.4 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0008-2339_X_dfm.log closed on Sun Jan 13 20:25:28 2019