! Started logfile: /vlbi/uf001/uva//J0005+5428_S_dfm.log on Sun Jan 13 20:23:28 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0005+5428_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0005+5428_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.851543 visibilities/baseline/integration-bin.
! Found source: J0005+5428
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8277 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0005+5428_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.048553Jy  sigma=21.221884
! Fit after  self-cal, rms=0.713320Jy  sigma=14.412461
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=4.312 mas, bpa=-16.27 degrees
! Estimated noise=0.600045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.22038 Jy
! Component: 100  -  total flux cleaned = 0.273874 Jy
! Total flux subtracted in 100 components = 0.273874 Jy
! Clean residual min=-0.006944 max=0.020923 Jy/beam
! Clean residual mean=-0.000022 rms=0.002105 Jy/beam
! Combined flux in latest and established models = 0.273874 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.273874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078309Jy  sigma=1.396853
! Fit after  self-cal, rms=0.078272Jy  sigma=1.396007
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219351 Jy
! Component: 100  -  total flux cleaned = 0.0329113 Jy
! Total flux subtracted in 100 components = 0.0329113 Jy
! Clean residual min=-0.005201 max=0.008881 Jy/beam
! Clean residual mean=-0.000007 rms=0.001268 Jy/beam
! Combined flux in latest and established models = 0.306785 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.306785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071623Jy  sigma=1.235305
! Fit after  self-cal, rms=0.071565Jy  sigma=1.233903
! Inverting map 
! Added new window around map position (-5.5, -7.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00830501 Jy
! Component: 100  -  total flux cleaned = 0.0128327 Jy
! Total flux subtracted in 100 components = 0.0128327 Jy
! Clean residual min=-0.005024 max=0.006447 Jy/beam
! Clean residual mean=-0.000001 rms=0.001082 Jy/beam
! Combined flux in latest and established models = 0.319618 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.319618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070618Jy  sigma=1.210024
! Fit after  self-cal, rms=0.070549Jy  sigma=1.208452
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=5.061 mas, bpa=-14.8 degrees
! Estimated noise=0.388196 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00421574 Jy
! Component: 100  -  total flux cleaned = 0.0057955 Jy
! Component: 150  -  total flux cleaned = 0.00711286 Jy
! Component: 200  -  total flux cleaned = 0.00770139 Jy
! Total flux subtracted in 200 components = 0.00770139 Jy
! Clean residual min=-0.003897 max=0.003366 Jy/beam
! Clean residual mean=0.000002 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.327319 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 46 components and 0.327319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070046Jy  sigma=1.195572
! Fit after  self-cal, rms=0.070036Jy  sigma=1.195345
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.625 x 5.061 at -14.8 degrees (North through East)
! Clean map  min=-0.0036538  max=0.28575 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.93     KP        1.01     
!   LA        0.96     MK        1.02     NL        1.04     OV        0.98     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.93     KP        1.02     
!   LA        0.97     MK        1.03     NL        1.04     OV        1.00     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.94     KP        1.06     
!   LA        0.97     MK        1.03     NL        1.03     OV        0.98     
!   PT        1.02     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.070036Jy  sigma=1.195345
! Fit after  self-cal, rms=0.067709Jy  sigma=1.165394
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.64 mas, bmaj=5.079 mas, bpa=-15.42 degrees
! Estimated noise=0.388141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0010484 Jy
! Component: 100  -  total flux cleaned = -0.000761315 Jy
! Component: 150  -  total flux cleaned = -0.000575783 Jy
! Component: 200  -  total flux cleaned = -0.000472288 Jy
! Total flux subtracted in 200 components = -0.000472288 Jy
! Clean residual min=-0.002347 max=0.002395 Jy/beam
! Clean residual mean=0.000005 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.326847 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.326847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067574Jy  sigma=1.162335
! Fit after  self-cal, rms=0.067589Jy  sigma=1.162177
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067589Jy  sigma=1.162177
! Fit after  self-cal, rms=0.067911Jy  sigma=1.157611
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=5.078 mas, bpa=-15.37 degrees
! Estimated noise=0.388321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.84885e-05 Jy
! Component: 100  -  total flux cleaned = 2.89389e-05 Jy
! Component: 150  -  total flux cleaned = -9.13443e-05 Jy
! Component: 200  -  total flux cleaned = -0.000236112 Jy
! Total flux subtracted in 200 components = -0.000236112 Jy
! Clean residual min=-0.002138 max=0.001730 Jy/beam
! Clean residual mean=0.000002 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.326611 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 79 components and 0.326611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067860Jy  sigma=1.156376
! Fit after  self-cal, rms=0.067861Jy  sigma=1.156330
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.8229e-05 Jy
! Component: 100  -  total flux cleaned = -0.00013913 Jy
! Component: 150  -  total flux cleaned = -0.000252801 Jy
! Component: 200  -  total flux cleaned = -0.000305421 Jy
! Total flux subtracted in 200 components = -0.000305421 Jy
! Clean residual min=-0.002057 max=0.001689 Jy/beam
! Clean residual mean=0.000002 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.326305 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.326305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067838Jy  sigma=1.155777
! Fit after  self-cal, rms=0.067837Jy  sigma=1.155757
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067837Jy  sigma=1.155757
! Fit after  self-cal, rms=0.067915Jy  sigma=1.155575
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=5.078 mas, bpa=-15.4 degrees
! Estimated noise=0.388536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158561 Jy
! Component: 100  -  total flux cleaned = 0.000222288 Jy
! Component: 150  -  total flux cleaned = 0.000168768 Jy
! Component: 200  -  total flux cleaned = 9.52282e-05 Jy
! Total flux subtracted in 200 components = 9.52282e-05 Jy
! Clean residual min=-0.001971 max=0.001646 Jy/beam
! Clean residual mean=0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.3264 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 93 components and 0.3264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067893Jy  sigma=1.155064
! Fit after  self-cal, rms=0.067893Jy  sigma=1.155052
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.28712e-05 Jy
! Component: 100  -  total flux cleaned = -5.29509e-05 Jy
! Component: 150  -  total flux cleaned = -7.36147e-05 Jy
! Component: 200  -  total flux cleaned = -9.3508e-05 Jy
! Total flux subtracted in 200 components = -9.3508e-05 Jy
! Clean residual min=-0.001939 max=0.001632 Jy/beam
! Clean residual mean=0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.326307 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 103 components and 0.326307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067881Jy  sigma=1.154776
! Fit after  self-cal, rms=0.067881Jy  sigma=1.154770
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067881Jy  sigma=1.154770
! Fit after  self-cal, rms=0.067923Jy  sigma=1.154687
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.013 mas, bmaj=8.664 mas, bpa=-33.22 degrees
! Estimated noise=0.494948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000401285 Jy
! Component: 100  -  total flux cleaned = -0.000351484 Jy
! Component: 150  -  total flux cleaned = -0.000330535 Jy
! Component: 200  -  total flux cleaned = -0.00034666 Jy
! Total flux subtracted in 200 components = -0.00034666 Jy
! Clean residual min=-0.001715 max=0.001802 Jy/beam
! Clean residual mean=0.000000 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.32596 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 117 components and 0.32596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067924Jy  sigma=1.154705
! Fit after  self-cal, rms=0.067924Jy  sigma=1.154659
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.31628e-05 Jy
! Component: 100  -  total flux cleaned = -6.78507e-05 Jy
! Component: 150  -  total flux cleaned = -6.66177e-05 Jy
! Component: 200  -  total flux cleaned = -6.65964e-05 Jy
! Total flux subtracted in 200 components = -6.65964e-05 Jy
! Clean residual min=-0.001669 max=0.001798 Jy/beam
! Clean residual mean=0.000000 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.325894 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.325894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067928Jy  sigma=1.154744
! Fit after  self-cal, rms=0.067928Jy  sigma=1.154735
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=5.078 mas, bpa=-15.43 degrees
! Estimated noise=0.388626 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.638 x 5.078 at -15.43 degrees (North through East)
! Clean map  min=-0.0018386  max=0.286 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.126 mas, bmaj=4.328 mas, bpa=-16.98 degrees
! Estimated noise=0.602471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221179 Jy
! Component: 100  -  total flux cleaned = 0.275506 Jy
! Component: 150  -  total flux cleaned = 0.297521 Jy
! Component: 200  -  total flux cleaned = 0.308083 Jy
! Total flux subtracted in 200 components = 0.308083 Jy
! Clean residual min=-0.003200 max=0.005065 Jy/beam
! Clean residual mean=-0.000006 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.308083 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.308083 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=5.078 mas, bpa=-15.43 degrees
! Estimated noise=0.388626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00670726 Jy
! Component: 100  -  total flux cleaned = 0.0107721 Jy
! Component: 150  -  total flux cleaned = 0.0135876 Jy
! Component: 200  -  total flux cleaned = 0.0155487 Jy
! Total flux subtracted in 200 components = 0.0155487 Jy
! Clean residual min=-0.001988 max=0.001898 Jy/beam
! Clean residual mean=-0.000001 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.323632 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.323632 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.013 mas, bmaj=8.664 mas, bpa=-33.22 degrees
! Estimated noise=0.494948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141542 Jy
! Component: 100  -  total flux cleaned = 0.00188982 Jy
! Component: 150  -  total flux cleaned = 0.00213961 Jy
! Component: 200  -  total flux cleaned = 0.00229586 Jy
! Total flux subtracted in 200 components = 0.00229586 Jy
! Clean residual min=-0.001832 max=0.001771 Jy/beam
! Clean residual mean=0.000000 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.325928 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.61761e-05 Jy
! Component: 100  -  total flux cleaned = 6.71984e-05 Jy
! Component: 150  -  total flux cleaned = 0.000106466 Jy
! Component: 200  -  total flux cleaned = 0.000124251 Jy
! Total flux subtracted in 200 components = 0.000124251 Jy
! Clean residual min=-0.001810 max=0.001800 Jy/beam
! Clean residual mean=0.000000 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.326052 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 77 components and 0.326052 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=5.078 mas, bpa=-15.43 degrees
! Estimated noise=0.388626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00048608 Jy
! Component: 100  -  total flux cleaned = -0.000396676 Jy
! Component: 150  -  total flux cleaned = -0.000314875 Jy
! Component: 200  -  total flux cleaned = -0.000275812 Jy
! Total flux subtracted in 200 components = -0.000275812 Jy
! Clean residual min=-0.001993 max=0.001835 Jy/beam
! Clean residual mean=0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.325776 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 89 components and 0.325776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068011Jy  sigma=1.156332
! Fit after  self-cal, rms=0.067996Jy  sigma=1.156077
wmodel J0005+5428_S_map.mod
! Writing 89 model components to file: J0005+5428_S_map.mod
wobs   J0005+5428_S_uvs.fits
! Writing UV FITS file: J0005+5428_S_uvs.fits
wwins  J0005+5428_S_map.win
! wwins: Wrote 3 windows to J0005+5428_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.75989e-06 Jy
! Component: 100  -  total flux cleaned = -5.64746e-05 Jy
! Component: 150  -  total flux cleaned = -0.000204676 Jy
! Component: 200  -  total flux cleaned = -0.00040218 Jy
! Component: 250  -  total flux cleaned = -0.000538638 Jy
! Component: 300  -  total flux cleaned = -0.00064531 Jy
! Component: 350  -  total flux cleaned = -0.000722913 Jy
! Component: 400  -  total flux cleaned = -0.000798796 Jy
! Component: 450  -  total flux cleaned = -0.00089714 Jy
! Component: 500  -  total flux cleaned = -0.000873407 Jy
! Component: 550  -  total flux cleaned = -0.00089752 Jy
! Component: 600  -  total flux cleaned = -0.000943552 Jy
! Component: 650  -  total flux cleaned = -0.000943567 Jy
! Component: 700  -  total flux cleaned = -0.000965716 Jy
! Component: 750  -  total flux cleaned = -0.0010086 Jy
! Component: 800  -  total flux cleaned = -0.000986735 Jy
! Component: 850  -  total flux cleaned = -0.00100697 Jy
! Component: 900  -  total flux cleaned = -0.00102704 Jy
! Component: 950  -  total flux cleaned = -0.00100681 Jy
! Component: 1000  -  total flux cleaned = -0.00100692 Jy
! Component: 1050  -  total flux cleaned = -0.00100701 Jy
! Component: 1100  -  total flux cleaned = -0.00104541 Jy
! Component: 1150  -  total flux cleaned = -0.00102634 Jy
! Component: 1200  -  total flux cleaned = -0.00102652 Jy
! Component: 1250  -  total flux cleaned = -0.00100815 Jy
! Component: 1300  -  total flux cleaned = -0.00102612 Jy
! Component: 1350  -  total flux cleaned = -0.000971964 Jy
! Component: 1400  -  total flux cleaned = -0.000971884 Jy
! Component: 1450  -  total flux cleaned = -0.000989276 Jy
! Component: 1500  -  total flux cleaned = -0.000919868 Jy
! Component: 1550  -  total flux cleaned = -0.000919974 Jy
! Component: 1600  -  total flux cleaned = -0.000903256 Jy
! Component: 1650  -  total flux cleaned = -0.000937006 Jy
! Component: 1700  -  total flux cleaned = -0.000821161 Jy
! Component: 1750  -  total flux cleaned = -0.000853931 Jy
! Component: 1800  -  total flux cleaned = -0.00085392 Jy
! Component: 1850  -  total flux cleaned = -0.000837909 Jy
! Component: 1900  -  total flux cleaned = -0.000901327 Jy
! Component: 1950  -  total flux cleaned = -0.000853999 Jy
! Component: 2000  -  total flux cleaned = -0.000869651 Jy
! Component: 2050  -  total flux cleaned = -0.000931393 Jy
! Component: 2100  -  total flux cleaned = -0.000977261 Jy
! Component: 2150  -  total flux cleaned = -0.000947164 Jy
! Component: 2200  -  total flux cleaned = -0.000977333 Jy
! Component: 2250  -  total flux cleaned = -0.00102185 Jy
! Component: 2300  -  total flux cleaned = -0.00108074 Jy
! Component: 2350  -  total flux cleaned = -0.00110964 Jy
! Component: 2400  -  total flux cleaned = -0.00108074 Jy
! Component: 2450  -  total flux cleaned = -0.0011093 Jy
! Component: 2500  -  total flux cleaned = -0.00115156 Jy
! Component: 2550  -  total flux cleaned = -0.00117957 Jy
! Component: 2600  -  total flux cleaned = -0.00120751 Jy
! Component: 2650  -  total flux cleaned = -0.00115219 Jy
! Component: 2700  -  total flux cleaned = -0.00119346 Jy
! Component: 2750  -  total flux cleaned = -0.00123409 Jy
! Component: 2800  -  total flux cleaned = -0.00124743 Jy
! Component: 2850  -  total flux cleaned = -0.0012474 Jy
! Component: 2900  -  total flux cleaned = -0.00124749 Jy
! Component: 2950  -  total flux cleaned = -0.00124743 Jy
! Component: 3000  -  total flux cleaned = -0.00132533 Jy
! Component: 3050  -  total flux cleaned = -0.0013381 Jy
! Component: 3100  -  total flux cleaned = -0.00128671 Jy
! Component: 3150  -  total flux cleaned = -0.00132477 Jy
! Component: 3200  -  total flux cleaned = -0.00132474 Jy
! Component: 3250  -  total flux cleaned = -0.00136212 Jy
! Component: 3300  -  total flux cleaned = -0.0013497 Jy
! Component: 3350  -  total flux cleaned = -0.00138662 Jy
! Component: 3400  -  total flux cleaned = -0.00137436 Jy
! Component: 3450  -  total flux cleaned = -0.00142271 Jy
! Component: 3500  -  total flux cleaned = -0.00141072 Jy
! Component: 3550  -  total flux cleaned = -0.00143467 Jy
! Component: 3600  -  total flux cleaned = -0.00145831 Jy
! Component: 3650  -  total flux cleaned = -0.00151702 Jy
! Component: 3700  -  total flux cleaned = -0.00147044 Jy
! Component: 3750  -  total flux cleaned = -0.00150532 Jy
! Component: 3800  -  total flux cleaned = -0.00148238 Jy
! Component: 3850  -  total flux cleaned = -0.00149377 Jy
! Component: 3900  -  total flux cleaned = -0.0015051 Jy
! Component: 3950  -  total flux cleaned = -0.00150501 Jy
! Component: 4000  -  total flux cleaned = -0.00150498 Jy
! Component: 4050  -  total flux cleaned = -0.00150491 Jy
! Total flux subtracted in 4096 components = -0.00147189 Jy
! Clean residual min=-0.000688 max=0.000761 Jy/beam
! Clean residual mean=0.000003 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.324304 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 359 components and 0.324304 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0005+5428_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.638 x 5.078 at -15.43 degrees (North through East)
! Clean map  min=-0.0012699  max=0.28663 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0005+5428_S_map.fits
wmodel /vlbi/uf001/uva//J0005+5428_S_map.mod
! Writing 359 model components to file: /vlbi/uf001/uva//J0005+5428_S_map.mod
wobs   /vlbi/uf001/uva//J0005+5428_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0005+5428_S_uvs.fits
wwins  /vlbi/uf001/uva//J0005+5428_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0005+5428_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.286626 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000194435 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.203507 0.203507 0.407014 0.814028 1.62806 3.25611 6.51222 13.0244 26.0489 52.0978
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.286 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1474.15 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0005+5428_S_dfm.log closed on Sun Jan 13 20:23:33 2019