! Started logfile: /vlbi/sb072/temp_maps//J2223+1326_X_dfm.log on Fri Jan 25 19:56:41 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/sb072/temp_maps//J2223+1326_X_uvm.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J2223+1326_X_uvm.fits
! AN table 1: 23 integrations on 36 of 36 possible baselines.
! AN table 2: 23 integrations on 21 of 21 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2223+1326
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 10488 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2223+1326_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003554Jy  sigma=35.554462
! Fit after  self-cal, rms=0.958693Jy  sigma=33.926735
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8375 mas, bmaj=1.777 mas, bpa=6.933 degrees
! Estimated noise=0.4235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311484 Jy
! Component: 100  -  total flux cleaned = 0.0389024 Jy
! Total flux subtracted in 100 components = 0.0389024 Jy
! Clean residual min=-0.001621 max=0.003204 Jy/beam
! Clean residual mean=-0.000003 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.0389024 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0389024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023172Jy  sigma=0.725972
! Fit after  self-cal, rms=0.021544Jy  sigma=0.669816
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037405 Jy
! Component: 100  -  total flux cleaned = 0.0053771 Jy
! Total flux subtracted in 100 components = 0.0053771 Jy
! Clean residual min=-0.001348 max=0.002192 Jy/beam
! Clean residual mean=-0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0442795 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.0442795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020804Jy  sigma=0.640359
! Fit after  self-cal, rms=0.020804Jy  sigma=0.640135
! Inverting map 
! Added new window around map position (-7.8, 15.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182434 Jy
! Component: 100  -  total flux cleaned = 0.00274175 Jy
! Total flux subtracted in 100 components = 0.00274175 Jy
! Clean residual min=-0.001303 max=0.001378 Jy/beam
! Clean residual mean=-0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0470213 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.0470213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020659Jy  sigma=0.634525
! Fit after  self-cal, rms=0.020638Jy  sigma=0.633851
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.117 mas, bmaj=2.175 mas, bpa=5.028 degrees
! Estimated noise=0.212848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.2, -15.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112968 Jy
! Component: 100  -  total flux cleaned = 0.00143017 Jy
! Component: 150  -  total flux cleaned = 0.00154937 Jy
! Component: 200  -  total flux cleaned = 0.00163124 Jy
! Total flux subtracted in 200 components = 0.00163124 Jy
! Clean residual min=-0.000743 max=0.000771 Jy/beam
! Clean residual mean=-0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.0486525 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 49 components and 0.0486525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020563Jy  sigma=0.631195
! Fit after  self-cal, rms=0.020558Jy  sigma=0.631028
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.117 x 2.175 at 5.028 degrees (North through East)
! Clean map  min=-0.00071308  max=0.041594 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.96     KP        0.97     
!   LA        0.99     NL        0.99     OV        1.06     PT        0.95     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     HN        1.00*    MK        0.98     NL        0.98     
!   OV        1.08     PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        0.95     KP        1.02     
!   LA        1.04     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     HN        1.00*    MK        0.98     NL        1.01     
!   OV        1.06     PT        1.08     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        0.94     
!   LA        1.02     NL        1.02     OV        1.00     PT        0.98     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     HN        1.00*    MK        0.98     NL        0.99     
!   OV        1.10     PT        1.02     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.94     KP        1.00     
!   LA        1.00     NL        0.96     OV        0.98     PT        0.97     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     HN        1.00*    MK        1.00     NL        0.98     
!   OV        1.10     PT        1.11     SC        0.91     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.96     KP        0.97     
!   LA        1.03     NL        1.02     OV        1.02     PT        0.97     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     HN        1.00*    MK        0.99     NL        0.96     
!   OV        1.09     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.91     KP        1.02     
!   LA        1.00     NL        1.04     OV        1.01     PT        0.94     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.00*    MK        1.00     NL        0.99     
!   OV        1.09     PT        0.98     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.96     KP        0.98     
!   LA        0.99     NL        1.03     OV        0.98     PT        0.96     
!   SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     HN        1.00*    MK        1.05     NL        0.99     
!   OV        1.09     PT        1.03     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.96     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.96     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     HN        1.00*    MK        0.98     NL        0.99     
!   OV        1.06     PT        1.06     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.020558Jy  sigma=0.631028
! Fit after  self-cal, rms=0.020544Jy  sigma=0.626628
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=2.169 mas, bpa=5.065 degrees
! Estimated noise=0.211742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.52477e-06 Jy
! Component: 100  -  total flux cleaned = 1.95885e-05 Jy
! Component: 150  -  total flux cleaned = -2.65214e-05 Jy
! Component: 200  -  total flux cleaned = -5.13316e-05 Jy
! Total flux subtracted in 200 components = -5.13316e-05 Jy
! Clean residual min=-0.000567 max=0.000548 Jy/beam
! Clean residual mean=-0.000000 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.0486012 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 0.0486012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020529Jy  sigma=0.626238
! Fit after  self-cal, rms=0.020529Jy  sigma=0.626135
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020529Jy  sigma=0.626135
! Fit after  self-cal, rms=0.020516Jy  sigma=0.626089
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.115 mas, bmaj=2.166 mas, bpa=5.146 degrees
! Estimated noise=0.211833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.78809e-05 Jy
! Component: 100  -  total flux cleaned = 2.82569e-05 Jy
! Component: 150  -  total flux cleaned = 1.39028e-05 Jy
! Component: 200  -  total flux cleaned = 7.42682e-06 Jy
! Total flux subtracted in 200 components = 7.42682e-06 Jy
! Clean residual min=-0.000574 max=0.000522 Jy/beam
! Clean residual mean=-0.000000 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0486086 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.0486086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020508Jy  sigma=0.625870
! Fit after  self-cal, rms=0.020506Jy  sigma=0.625837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.83269e-05 Jy
! Component: 100  -  total flux cleaned = -1.15394e-05 Jy
! Component: 150  -  total flux cleaned = -1.1513e-05 Jy
! Component: 200  -  total flux cleaned = -6.04909e-06 Jy
! Total flux subtracted in 200 components = -6.04909e-06 Jy
! Clean residual min=-0.000581 max=0.000511 Jy/beam
! Clean residual mean=-0.000000 rms=0.000128 Jy/beam
! Combined flux in latest and established models = 0.0486025 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.0486025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020501Jy  sigma=0.625715
! Fit after  self-cal, rms=0.020501Jy  sigma=0.625700
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020501Jy  sigma=0.625700
! Fit after  self-cal, rms=0.020515Jy  sigma=0.625588
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=2.164 mas, bpa=5.196 degrees
! Estimated noise=0.212125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.95062e-05 Jy
! Component: 100  -  total flux cleaned = -1.14496e-05 Jy
! Component: 150  -  total flux cleaned = -1.70256e-05 Jy
! Component: 200  -  total flux cleaned = -1.72386e-05 Jy
! Total flux subtracted in 200 components = -1.72386e-05 Jy
! Clean residual min=-0.000580 max=0.000497 Jy/beam
! Clean residual mean=-0.000000 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.0485853 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.0485853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020510Jy  sigma=0.625467
! Fit after  self-cal, rms=0.020510Jy  sigma=0.625454
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.17228e-06 Jy
! Component: 100  -  total flux cleaned = 4.18529e-06 Jy
! Component: 150  -  total flux cleaned = 4.31589e-06 Jy
! Component: 200  -  total flux cleaned = 4.37418e-06 Jy
! Total flux subtracted in 200 components = 4.37418e-06 Jy
! Clean residual min=-0.000582 max=0.000502 Jy/beam
! Clean residual mean=-0.000000 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0485897 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 89 components and 0.0485897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020507Jy  sigma=0.625383
! Fit after  self-cal, rms=0.020507Jy  sigma=0.625376
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020507Jy  sigma=0.625376
! Fit after  self-cal, rms=0.020503Jy  sigma=0.625272
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.357 mas, bmaj=3.103 mas, bpa=-1.663 degrees
! Estimated noise=0.24878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.76817e-05 Jy
! Component: 100  -  total flux cleaned = 2.21733e-05 Jy
! Component: 150  -  total flux cleaned = 2.22363e-05 Jy
! Component: 200  -  total flux cleaned = 2.99479e-05 Jy
! Total flux subtracted in 200 components = 2.99479e-05 Jy
! Clean residual min=-0.000641 max=0.000519 Jy/beam
! Clean residual mean=-0.000001 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0486196 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 98 components and 0.0486196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020502Jy  sigma=0.625196
! Fit after  self-cal, rms=0.020502Jy  sigma=0.625186
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.89456e-05 Jy
! Component: 100  -  total flux cleaned = 2.23062e-05 Jy
! Component: 150  -  total flux cleaned = 1.62624e-05 Jy
! Component: 200  -  total flux cleaned = 1.91534e-05 Jy
! Total flux subtracted in 200 components = 1.91534e-05 Jy
! Clean residual min=-0.000640 max=0.000510 Jy/beam
! Clean residual mean=-0.000001 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0486388 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 103 components and 0.0486388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020501Jy  sigma=0.625157
! Fit after  self-cal, rms=0.020501Jy  sigma=0.625153
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=2.161 mas, bpa=5.259 degrees
! Estimated noise=0.212251 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.112 x 2.161 at 5.259 degrees (North through East)
! Clean map  min=-0.00054989  max=0.041349 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8337 mas, bmaj=1.768 mas, bpa=7.132 degrees
! Estimated noise=0.419372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0314688 Jy
! Component: 100  -  total flux cleaned = 0.0395648 Jy
! Component: 150  -  total flux cleaned = 0.0430343 Jy
! Component: 200  -  total flux cleaned = 0.0449278 Jy
! Total flux subtracted in 200 components = 0.0449278 Jy
! Clean residual min=-0.001175 max=0.001240 Jy/beam
! Clean residual mean=-0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.0449278 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0449278 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=2.161 mas, bpa=5.259 degrees
! Estimated noise=0.212251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165978 Jy
! Component: 100  -  total flux cleaned = 0.00248981 Jy
! Component: 150  -  total flux cleaned = 0.00282011 Jy
! Component: 200  -  total flux cleaned = 0.00300223 Jy
! Total flux subtracted in 200 components = 0.00300223 Jy
! Clean residual min=-0.000639 max=0.000553 Jy/beam
! Clean residual mean=-0.000001 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.04793 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 38 components and 0.04793 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.357 mas, bmaj=3.103 mas, bpa=-1.663 degrees
! Estimated noise=0.24878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000342068 Jy
! Component: 100  -  total flux cleaned = 0.000474143 Jy
! Component: 150  -  total flux cleaned = 0.000542775 Jy
! Component: 200  -  total flux cleaned = 0.00058512 Jy
! Total flux subtracted in 200 components = 0.00058512 Jy
! Clean residual min=-0.000659 max=0.000511 Jy/beam
! Clean residual mean=-0.000001 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0485151 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84159e-05 Jy
! Component: 100  -  total flux cleaned = 2.94677e-05 Jy
! Component: 150  -  total flux cleaned = 3.971e-05 Jy
! Component: 200  -  total flux cleaned = 4.93104e-05 Jy
! Total flux subtracted in 200 components = 4.93104e-05 Jy
! Clean residual min=-0.000661 max=0.000507 Jy/beam
! Clean residual mean=-0.000001 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0485644 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 61 components and 0.0485644 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=2.161 mas, bpa=5.259 degrees
! Estimated noise=0.212251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.41876e-05 Jy
! Component: 100  -  total flux cleaned = -8.39484e-05 Jy
! Component: 150  -  total flux cleaned = -8.3514e-05 Jy
! Component: 200  -  total flux cleaned = -6.95645e-05 Jy
! Total flux subtracted in 200 components = -6.95645e-05 Jy
! Clean residual min=-0.000613 max=0.000489 Jy/beam
! Clean residual mean=-0.000001 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.0484949 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 76 components and 0.0484949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020508Jy  sigma=0.625418
! Fit after  self-cal, rms=0.020508Jy  sigma=0.625384
wmodel J2223+1326_X_map.mod
! Writing 76 model components to file: J2223+1326_X_map.mod
wobs   J2223+1326_X_uvs.fits
! Writing UV FITS file: J2223+1326_X_uvs.fits
wwins  J2223+1326_X_map.win
! wwins: Wrote 3 windows to J2223+1326_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00022444 Jy
! Component: 100  -  total flux cleaned = -0.000334653 Jy
! Component: 150  -  total flux cleaned = -0.00038564 Jy
! Component: 200  -  total flux cleaned = -0.000418007 Jy
! Component: 250  -  total flux cleaned = -0.000472199 Jy
! Component: 300  -  total flux cleaned = -0.000472077 Jy
! Component: 350  -  total flux cleaned = -0.000464951 Jy
! Component: 400  -  total flux cleaned = -0.0004859 Jy
! Component: 450  -  total flux cleaned = -0.000492688 Jy
! Component: 500  -  total flux cleaned = -0.000479587 Jy
! Component: 550  -  total flux cleaned = -0.000473307 Jy
! Component: 600  -  total flux cleaned = -0.000460965 Jy
! Component: 650  -  total flux cleaned = -0.000442645 Jy
! Component: 700  -  total flux cleaned = -0.000424761 Jy
! Component: 750  -  total flux cleaned = -0.000412964 Jy
! Component: 800  -  total flux cleaned = -0.000401273 Jy
! Component: 850  -  total flux cleaned = -0.000373033 Jy
! Component: 900  -  total flux cleaned = -0.000367462 Jy
! Component: 950  -  total flux cleaned = -0.000351112 Jy
! Component: 1000  -  total flux cleaned = -0.000329604 Jy
! Component: 1050  -  total flux cleaned = -0.000308479 Jy
! Component: 1100  -  total flux cleaned = -0.000298124 Jy
! Component: 1150  -  total flux cleaned = -0.000277531 Jy
! Component: 1200  -  total flux cleaned = -0.000247033 Jy
! Component: 1250  -  total flux cleaned = -0.000221915 Jy
! Component: 1300  -  total flux cleaned = -0.000202123 Jy
! Component: 1350  -  total flux cleaned = -0.000192333 Jy
! Component: 1400  -  total flux cleaned = -0.000153655 Jy
! Component: 1450  -  total flux cleaned = -0.000144067 Jy
! Component: 1500  -  total flux cleaned = -0.000115732 Jy
! Component: 1550  -  total flux cleaned = -8.31558e-05 Jy
! Component: 1600  -  total flux cleaned = -5.09882e-05 Jy
! Component: 1650  -  total flux cleaned = -2.82998e-05 Jy
! Component: 1700  -  total flux cleaned = 1.6657e-05 Jy
! Component: 1750  -  total flux cleaned = 3.88709e-05 Jy
! Component: 1800  -  total flux cleaned = 8.28338e-05 Jy
! Component: 1850  -  total flux cleaned = 0.000104621 Jy
! Component: 1900  -  total flux cleaned = 0.00013054 Jy
! Component: 1950  -  total flux cleaned = 0.000168933 Jy
! Component: 2000  -  total flux cleaned = 0.00019857 Jy
! Component: 2050  -  total flux cleaned = 0.0002195 Jy
! Component: 2100  -  total flux cleaned = 0.000256827 Jy
! Component: 2150  -  total flux cleaned = 0.000302034 Jy
! Component: 2200  -  total flux cleaned = 0.000314234 Jy
! Component: 2250  -  total flux cleaned = 0.000354644 Jy
! Component: 2300  -  total flux cleaned = 0.000394691 Jy
! Component: 2350  -  total flux cleaned = 0.000414541 Jy
! Component: 2400  -  total flux cleaned = 0.00046174 Jy
! Component: 2450  -  total flux cleaned = 0.000477306 Jy
! Component: 2500  -  total flux cleaned = 0.00051209 Jy
! Component: 2550  -  total flux cleaned = 0.000542749 Jy
! Component: 2600  -  total flux cleaned = 0.000565499 Jy
! Component: 2650  -  total flux cleaned = 0.000591923 Jy
! Component: 2700  -  total flux cleaned = 0.000614459 Jy
! Component: 2750  -  total flux cleaned = 0.000640482 Jy
! Component: 2800  -  total flux cleaned = 0.000658957 Jy
! Component: 2850  -  total flux cleaned = 0.000699204 Jy
! Component: 2900  -  total flux cleaned = 0.000720989 Jy
! Component: 2950  -  total flux cleaned = 0.000746238 Jy
! Component: 3000  -  total flux cleaned = 0.000760571 Jy
! Component: 3050  -  total flux cleaned = 0.000803289 Jy
! Component: 3100  -  total flux cleaned = 0.000817404 Jy
! Component: 3150  -  total flux cleaned = 0.000849012 Jy
! Component: 3200  -  total flux cleaned = 0.000876908 Jy
! Component: 3250  -  total flux cleaned = 0.000894229 Jy
! Component: 3300  -  total flux cleaned = 0.000921798 Jy
! Component: 3350  -  total flux cleaned = 0.000942335 Jy
! Component: 3400  -  total flux cleaned = 0.000972984 Jy
! Component: 3450  -  total flux cleaned = 0.000993294 Jy
! Component: 3500  -  total flux cleaned = 0.00102024 Jy
! Component: 3550  -  total flux cleaned = 0.00105032 Jy
! Component: 3600  -  total flux cleaned = 0.0010703 Jy
! Component: 3650  -  total flux cleaned = 0.00108685 Jy
! Component: 3700  -  total flux cleaned = 0.00110335 Jy
! Component: 3750  -  total flux cleaned = 0.0011263 Jy
! Component: 3800  -  total flux cleaned = 0.00114585 Jy
! Component: 3850  -  total flux cleaned = 0.00117507 Jy
! Component: 3900  -  total flux cleaned = 0.00119125 Jy
! Component: 3950  -  total flux cleaned = 0.001217 Jy
! Component: 4000  -  total flux cleaned = 0.00123621 Jy
! Component: 4050  -  total flux cleaned = 0.00125217 Jy
! Total flux subtracted in 4096 components = 0.00128073 Jy
! Clean residual min=-0.000200 max=0.000189 Jy/beam
! Clean residual mean=0.000000 rms=0.000053 Jy/beam
! Combined flux in latest and established models = 0.0497756 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 363 components and 0.0497756 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/sb072/temp_maps//J2223+1326_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.112 x 2.161 at 5.259 degrees (North through East)
! Clean map  min=-0.00048491  max=0.041253 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J2223+1326_X_map.fits
wmodel /vlbi/sb072/temp_maps//J2223+1326_X_map.mod
! Writing 363 model components to file: /vlbi/sb072/temp_maps//J2223+1326_X_map.mod
wobs   /vlbi/sb072/temp_maps//J2223+1326_X_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J2223+1326_X_uvs.fits
wwins  /vlbi/sb072/temp_maps//J2223+1326_X_map.win
! wwins: Wrote 4 windows to /vlbi/sb072/temp_maps//J2223+1326_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0412533 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.26206e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.382665 0.382665 0.765329 1.53066 3.06132 6.12263 12.2453 24.4905 48.9811 97.9621
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  783.976 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J2223+1326_X_dfm.log closed on Fri Jan 25 19:56:45 2019