! Started logfile: /vlbi/sb072/temp_maps//J1939-1525_C_dfm.log on Sat Dec 15 22:38:08 2018 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/sb072/temp_maps//J1939-1525_C_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J1939-1525_C_uvm.fits ! AN table 1: 3 integrations on 21 of 21 possible baselines. ! AN table 2: 4 integrations on 15 of 15 possible baselines. ! AN table 3: 4 integrations on 15 of 15 possible baselines. ! AN table 4: 4 integrations on 15 of 15 possible baselines. ! AN table 5: 4 integrations on 3 of 3 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1939-1525 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 2040 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J1939-1525_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.658085Jy sigma=75.248083 ! Fit after self-cal, rms=0.374598Jy sigma=16.180901 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.287 mas, bmaj=3.465 mas, bpa=-6.743 degrees ! Estimated noise=0.564181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03222 Jy ! Component: 100 - total flux cleaned = 1.2581 Jy ! Total flux subtracted in 100 components = 1.2581 Jy ! Clean residual min=-0.034465 max=0.068458 Jy/beam ! Clean residual mean=0.000020 rms=0.007712 Jy/beam ! Combined flux in latest and established models = 1.2581 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.2581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160999Jy sigma=6.795145 ! Fit after self-cal, rms=0.160996Jy sigma=6.795022 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0661483 Jy ! Component: 100 - total flux cleaned = 0.0870069 Jy ! Total flux subtracted in 100 components = 0.0870069 Jy ! Clean residual min=-0.025375 max=0.035895 Jy/beam ! Clean residual mean=0.000014 rms=0.005843 Jy/beam ! Combined flux in latest and established models = 1.34511 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 1.34511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.123237Jy sigma=5.340259 ! Fit after self-cal, rms=0.123236Jy sigma=5.340121 ! Inverting map ! Added new window around map position (3.3, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305011 Jy ! Component: 100 - total flux cleaned = 0.0426572 Jy ! Total flux subtracted in 100 components = 0.0426572 Jy ! Clean residual min=-0.026159 max=0.029939 Jy/beam ! Clean residual mean=0.000012 rms=0.005412 Jy/beam ! Combined flux in latest and established models = 1.38777 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 1.38777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.112735Jy sigma=4.847940 ! Fit after self-cal, rms=0.112033Jy sigma=4.803702 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.643 mas, bmaj=4.218 mas, bpa=-5.617 degrees ! Estimated noise=0.401213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240921 Jy ! Component: 100 - total flux cleaned = 0.0387464 Jy ! Component: 150 - total flux cleaned = 0.0484313 Jy ! Component: 200 - total flux cleaned = 0.0544917 Jy ! Total flux subtracted in 200 components = 0.0544917 Jy ! Clean residual min=-0.027817 max=0.030886 Jy/beam ! Clean residual mean=0.000006 rms=0.006614 Jy/beam ! Combined flux in latest and established models = 1.44226 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 56 components and 1.44226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.106392Jy sigma=4.525387 ! Fit after self-cal, rms=0.106219Jy sigma=4.498276 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.643 x 4.218 at -5.617 degrees (North through East) ! Clean map min=-0.02667 max=1.325 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 LA 1.01 MK 0.98 ! NL 0.97 OV 1.00 PT 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 LA 1.07 MK 0.99 OV 1.03 ! PT 0.91 SC 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 0.99 LA 1.03 NL 0.97 ! PT 0.91 SC 1.10 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 LA 1.10 MK 0.95 NL 1.03 ! OV 1.03 SC 0.93 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 LA 1.01 MK 1.00 ! NL 0.95 OV 1.01 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 LA 1.07 MK 0.97 OV 1.03 ! PT 0.91 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.98 LA 1.04 NL 0.96 ! PT 0.90 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 LA 1.11 MK 0.93 NL 1.01 ! OV 0.97 SC 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 LA 1.00 MK 1.00 ! NL 0.97 OV 1.04 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 LA 1.05 MK 1.00 OV 1.01 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.98 LA 1.04 NL 0.97 ! PT 0.89 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 LA 1.08 MK 1.01 NL 1.03 ! OV 1.04 SC 0.98 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 LA 1.00 MK 0.98 ! NL 0.97 OV 0.98 PT 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 LA 0.89 MK 0.96 OV 1.03 ! PT 0.89 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.99 LA 1.05 NL 0.97 ! PT 0.92 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 LA 1.07 MK 1.00 NL 1.05 ! OV 1.06 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 LA 1.00 MK 0.99 ! NL 0.97 OV 1.02 PT 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 LA 1.04 MK 0.99 OV 1.03 ! PT 0.91 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.98 LA 1.03 NL 1.04 ! PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 LA 1.05 MK 1.02 NL 1.07 ! OV 1.06 SC 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 LA 1.01 MK 0.99 ! NL 0.98 OV 1.02 PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 LA 1.05 MK 0.99 OV 1.02 ! PT 0.91 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 0.98 LA 1.03 NL 1.09 ! PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 LA 1.05 MK 1.07 NL 1.09 ! OV 1.04 SC 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 LA 1.01 MK 0.99 ! NL 0.99 OV 1.03 PT 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 LA 1.04 MK 1.00 OV 1.02 ! PT 0.90 SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.98 LA 1.04 NL 1.07 ! PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.98 LA 1.03 MK 1.04 NL 1.09 ! OV 1.04 SC 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 LA 1.02 MK 0.99 ! NL 0.99 OV 1.02 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 LA 1.05 MK 0.98 OV 1.02 ! PT 0.92 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.98 LA 1.03 NL 1.08 ! PT 0.91 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 LA 1.04 MK 1.05 NL 1.07 ! OV 1.05 SC 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HN 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106219Jy sigma=4.498276 ! Fit after self-cal, rms=0.047645Jy sigma=1.636707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.635 mas, bmaj=4.26 mas, bpa=-5.82 degrees ! Estimated noise=0.404058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112054 Jy ! Component: 100 - total flux cleaned = -0.0124046 Jy ! Component: 150 - total flux cleaned = -0.0128626 Jy ! Component: 200 - total flux cleaned = -0.0132469 Jy ! Total flux subtracted in 200 components = -0.0132469 Jy ! Clean residual min=-0.009117 max=0.010011 Jy/beam ! Clean residual mean=-0.000023 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 1.42901 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 1.42901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044710Jy sigma=1.514353 ! Fit after self-cal, rms=0.043755Jy sigma=1.488944 ! Inverting map ! Added new window around map position (-2.4, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00919165 Jy ! Component: 100 - total flux cleaned = 0.0101889 Jy ! Component: 150 - total flux cleaned = 0.0105501 Jy ! Component: 200 - total flux cleaned = 0.0104271 Jy ! Total flux subtracted in 200 components = 0.0104271 Jy ! Clean residual min=-0.007062 max=0.005748 Jy/beam ! Clean residual mean=-0.000023 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 1.43944 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 1.43944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040957Jy sigma=1.322079 ! Fit after self-cal, rms=0.040000Jy sigma=1.279592 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040000Jy sigma=1.279592 ! Fit after self-cal, rms=0.039592Jy sigma=1.253297 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.633 mas, bmaj=4.259 mas, bpa=-5.802 degrees ! Estimated noise=0.404181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0030531 Jy ! Component: 100 - total flux cleaned = -0.00263273 Jy ! Component: 150 - total flux cleaned = -0.00191405 Jy ! Component: 200 - total flux cleaned = -0.00201431 Jy ! Total flux subtracted in 200 components = -0.00201431 Jy ! Clean residual min=-0.006007 max=0.004990 Jy/beam ! Clean residual mean=-0.000022 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 1.43743 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 1.43743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038303Jy sigma=1.189532 ! Fit after self-cal, rms=0.037949Jy sigma=1.175315 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173513 Jy ! Component: 100 - total flux cleaned = 0.00029023 Jy ! Component: 150 - total flux cleaned = 0.000384969 Jy ! Component: 200 - total flux cleaned = 0.000224584 Jy ! Total flux subtracted in 200 components = 0.000224584 Jy ! Clean residual min=-0.005314 max=0.004843 Jy/beam ! Clean residual mean=-0.000022 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 1.43765 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 1.43765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037314Jy sigma=1.148717 ! Fit after self-cal, rms=0.037187Jy sigma=1.143445 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037187Jy sigma=1.143445 ! Fit after self-cal, rms=0.036884Jy sigma=1.130170 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.632 mas, bmaj=4.258 mas, bpa=-5.795 degrees ! Estimated noise=0.404041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198218 Jy ! Component: 100 - total flux cleaned = -0.00179392 Jy ! Component: 150 - total flux cleaned = -0.00187234 Jy ! Component: 200 - total flux cleaned = -0.00187139 Jy ! Total flux subtracted in 200 components = -0.00187139 Jy ! Clean residual min=-0.004632 max=0.004253 Jy/beam ! Clean residual mean=-0.000021 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 1.43578 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 127 components and 1.43578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036349Jy sigma=1.106862 ! Fit after self-cal, rms=0.036266Jy sigma=1.103722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.92635e-06 Jy ! Component: 100 - total flux cleaned = 0.000137453 Jy ! Component: 150 - total flux cleaned = 7.32574e-05 Jy ! Component: 200 - total flux cleaned = 1.49532e-05 Jy ! Total flux subtracted in 200 components = 1.49532e-05 Jy ! Clean residual min=-0.004218 max=0.004183 Jy/beam ! Clean residual mean=-0.000021 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 1.43579 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 1.43579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035950Jy sigma=1.094304 ! Fit after self-cal, rms=0.035938Jy sigma=1.092993 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035938Jy sigma=1.092993 ! Fit after self-cal, rms=0.035749Jy sigma=1.084775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=8.594 mas, bpa=-6.681 degrees ! Estimated noise=0.487825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000740887 Jy ! Component: 100 - total flux cleaned = -0.00099883 Jy ! Component: 150 - total flux cleaned = -0.00115076 Jy ! Component: 200 - total flux cleaned = -0.00128139 Jy ! Total flux subtracted in 200 components = -0.00128139 Jy ! Clean residual min=-0.003981 max=0.003508 Jy/beam ! Clean residual mean=-0.000042 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 1.43451 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 143 components and 1.43451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035579Jy sigma=1.078882 ! Fit after self-cal, rms=0.035523Jy sigma=1.077248 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177285 Jy ! Component: 100 - total flux cleaned = -0.000175493 Jy ! Component: 150 - total flux cleaned = -0.000211311 Jy ! Component: 200 - total flux cleaned = -0.000279786 Jy ! Total flux subtracted in 200 components = -0.000279786 Jy ! Clean residual min=-0.003851 max=0.003604 Jy/beam ! Clean residual mean=-0.000042 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 1.43423 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 152 components and 1.43423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035423Jy sigma=1.075282 ! Fit after self-cal, rms=0.035420Jy sigma=1.074431 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.631 mas, bmaj=4.257 mas, bpa=-5.79 degrees ! Estimated noise=0.404006 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.631 x 4.257 at -5.79 degrees (North through East) ! Clean map min=-0.0035058 max=1.3276 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035420Jy sigma=1.074431 ! Fit after self-cal, rms=0.033233Jy sigma=0.934134 ! Inverting map and beam ! Estimated beam: bmin=1.63 mas, bmaj=4.256 mas, bpa=-5.772 degrees ! Estimated noise=0.404109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037591 Jy ! Component: 100 - total flux cleaned = -0.000573781 Jy ! Component: 150 - total flux cleaned = -0.000631061 Jy ! Component: 200 - total flux cleaned = -0.000683226 Jy ! Total flux subtracted in 200 components = -0.000683226 Jy ! Clean residual min=-0.003446 max=0.003649 Jy/beam ! Clean residual mean=-0.000021 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 1.43355 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 160 components and 1.43355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032940Jy sigma=0.923299 ! Fit after self-cal, rms=0.032934Jy sigma=0.922460 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.8319e-05 Jy ! Component: 100 - total flux cleaned = -0.000247246 Jy ! Component: 150 - total flux cleaned = -0.000341009 Jy ! Component: 200 - total flux cleaned = -0.000340836 Jy ! Total flux subtracted in 200 components = -0.000340836 Jy ! Clean residual min=-0.003266 max=0.003547 Jy/beam ! Clean residual mean=-0.000021 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 1.43321 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 163 components and 1.43321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032747Jy sigma=0.917151 ! Fit after self-cal, rms=0.032754Jy sigma=0.916755 ! Inverting map ! Added new window around map position (-9.3, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194124 Jy ! Component: 100 - total flux cleaned = 0.00187293 Jy ! Component: 150 - total flux cleaned = 0.00187594 Jy ! Component: 200 - total flux cleaned = 0.00192861 Jy ! Total flux subtracted in 200 components = 0.00192861 Jy ! Clean residual min=-0.003054 max=0.002647 Jy/beam ! Clean residual mean=-0.000020 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 1.43514 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 181 components and 1.43514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032325Jy sigma=0.902610 ! Fit after self-cal, rms=0.032248Jy sigma=0.899921 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032248Jy sigma=0.899921 ! Fit after self-cal, rms=0.032153Jy sigma=0.894914 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.268 mas, bmaj=3.464 mas, bpa=-6.969 degrees ! Estimated noise=0.574132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03485 Jy ! Component: 100 - total flux cleaned = 1.26269 Jy ! Component: 150 - total flux cleaned = 1.33112 Jy ! Component: 200 - total flux cleaned = 1.35811 Jy ! Total flux subtracted in 200 components = 1.35811 Jy ! Clean residual min=-0.007962 max=0.015920 Jy/beam ! Clean residual mean=-0.000003 rms=0.001955 Jy/beam ! Combined flux in latest and established models = 1.35811 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.35811 Jy ! Inverting map and beam ! Estimated beam: bmin=1.629 mas, bmaj=4.255 mas, bpa=-5.765 degrees ! Estimated noise=0.40423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253177 Jy ! Component: 100 - total flux cleaned = 0.0404279 Jy ! Component: 150 - total flux cleaned = 0.0506814 Jy ! Component: 200 - total flux cleaned = 0.0580506 Jy ! Total flux subtracted in 200 components = 0.0580506 Jy ! Clean residual min=-0.004445 max=0.007694 Jy/beam ! Clean residual mean=-0.000021 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 1.41616 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 53 components and 1.41616 Jy ! Inverting map ! Added new window around map position (3.3, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692451 Jy ! Component: 100 - total flux cleaned = 0.0113173 Jy ! Component: 150 - total flux cleaned = 0.0146488 Jy ! Component: 200 - total flux cleaned = 0.0170252 Jy ! Total flux subtracted in 200 components = 0.0170252 Jy ! Clean residual min=-0.003218 max=0.003552 Jy/beam ! Clean residual mean=-0.000020 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 1.43319 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 77 components and 1.43319 Jy ! Inverting map ! Added new window around map position (10.5, -3.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285681 Jy ! Component: 100 - total flux cleaned = 0.00352663 Jy ! Component: 150 - total flux cleaned = 0.00390547 Jy ! Component: 200 - total flux cleaned = 0.00425814 Jy ! Total flux subtracted in 200 components = 0.00425814 Jy ! Clean residual min=-0.002918 max=0.002705 Jy/beam ! Clean residual mean=-0.000018 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 1.43745 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 1.43745 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=8.592 mas, bpa=-6.659 degrees ! Estimated noise=0.488507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158118 Jy ! Component: 100 - total flux cleaned = 0.00195051 Jy ! Component: 150 - total flux cleaned = 0.00207538 Jy ! Component: 200 - total flux cleaned = 0.00219156 Jy ! Total flux subtracted in 200 components = 0.00219156 Jy ! Clean residual min=-0.003202 max=0.002629 Jy/beam ! Clean residual mean=-0.000037 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 1.43964 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112101 Jy ! Component: 100 - total flux cleaned = 0.000184182 Jy ! Component: 150 - total flux cleaned = 0.000286265 Jy ! Component: 200 - total flux cleaned = 0.000384686 Jy ! Total flux subtracted in 200 components = 0.000384686 Jy ! Clean residual min=-0.003131 max=0.002641 Jy/beam ! Clean residual mean=-0.000037 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 1.44002 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 124 components and 1.44002 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.629 mas, bmaj=4.255 mas, bpa=-5.765 degrees ! Estimated noise=0.40423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000680661 Jy ! Component: 100 - total flux cleaned = -0.000679017 Jy ! Component: 150 - total flux cleaned = -0.000733167 Jy ! Component: 200 - total flux cleaned = -0.000587366 Jy ! Total flux subtracted in 200 components = -0.000587366 Jy ! Clean residual min=-0.002672 max=0.002269 Jy/beam ! Clean residual mean=-0.000018 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 1.43944 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 1.43944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031469Jy sigma=0.883412 ! Fit after self-cal, rms=0.031365Jy sigma=0.875696 wmodel J1939-1525_C_map.mod ! Writing 137 model components to file: J1939-1525_C_map.mod wobs J1939-1525_C_uvs.fits ! Writing UV FITS file: J1939-1525_C_uvs.fits wwins J1939-1525_C_map.win ! wwins: Wrote 6 windows to J1939-1525_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000841209 Jy ! Component: 100 - total flux cleaned = -0.00134812 Jy ! Component: 150 - total flux cleaned = -0.00178156 Jy ! Component: 200 - total flux cleaned = -0.00196833 Jy ! Component: 250 - total flux cleaned = -0.00210884 Jy ! Component: 300 - total flux cleaned = -0.00220982 Jy ! Component: 350 - total flux cleaned = -0.00227586 Jy ! Component: 400 - total flux cleaned = -0.00240358 Jy ! Component: 450 - total flux cleaned = -0.00252766 Jy ! Component: 500 - total flux cleaned = -0.00258739 Jy ! Component: 550 - total flux cleaned = -0.00255722 Jy ! Component: 600 - total flux cleaned = -0.0026437 Jy ! Component: 650 - total flux cleaned = -0.00269985 Jy ! Component: 700 - total flux cleaned = -0.00261682 Jy ! Component: 750 - total flux cleaned = -0.00267069 Jy ! Component: 800 - total flux cleaned = -0.00251062 Jy ! Component: 850 - total flux cleaned = -0.00251095 Jy ! Component: 900 - total flux cleaned = -0.00243356 Jy ! Component: 950 - total flux cleaned = -0.00235727 Jy ! Component: 1000 - total flux cleaned = -0.00225767 Jy ! Component: 1050 - total flux cleaned = -0.00228269 Jy ! Component: 1100 - total flux cleaned = -0.00228289 Jy ! Component: 1150 - total flux cleaned = -0.0022828 Jy ! Component: 1200 - total flux cleaned = -0.00235319 Jy ! Component: 1250 - total flux cleaned = -0.00232972 Jy ! Component: 1300 - total flux cleaned = -0.00235279 Jy ! Component: 1350 - total flux cleaned = -0.00239866 Jy ! Component: 1400 - total flux cleaned = -0.0024666 Jy ! Component: 1450 - total flux cleaned = -0.00253317 Jy ! Component: 1500 - total flux cleaned = -0.00251108 Jy ! Component: 1550 - total flux cleaned = -0.00246802 Jy ! Component: 1600 - total flux cleaned = -0.00253304 Jy ! Component: 1650 - total flux cleaned = -0.00261816 Jy ! Component: 1700 - total flux cleaned = -0.00268138 Jy ! Component: 1750 - total flux cleaned = -0.00278549 Jy ! Component: 1800 - total flux cleaned = -0.00282658 Jy ! Component: 1850 - total flux cleaned = -0.00296981 Jy ! Component: 1900 - total flux cleaned = -0.00309109 Jy ! Component: 1950 - total flux cleaned = -0.00315112 Jy ! Component: 2000 - total flux cleaned = -0.00321104 Jy ! Component: 2050 - total flux cleaned = -0.00340819 Jy ! Component: 2100 - total flux cleaned = -0.00348609 Jy ! Component: 2150 - total flux cleaned = -0.00352477 Jy ! Component: 2200 - total flux cleaned = -0.00365928 Jy ! Component: 2250 - total flux cleaned = -0.00371619 Jy ! Component: 2300 - total flux cleaned = -0.00379173 Jy ! Component: 2350 - total flux cleaned = -0.00386712 Jy ! Component: 2400 - total flux cleaned = -0.00403465 Jy ! Component: 2450 - total flux cleaned = -0.00405299 Jy ! Component: 2500 - total flux cleaned = -0.00414463 Jy ! Component: 2550 - total flux cleaned = -0.00419922 Jy ! Component: 2600 - total flux cleaned = -0.00428966 Jy ! Component: 2650 - total flux cleaned = -0.00439715 Jy ! Component: 2700 - total flux cleaned = -0.00446829 Jy ! Component: 2750 - total flux cleaned = -0.00453901 Jy ! Component: 2800 - total flux cleaned = -0.00464415 Jy ! Component: 2850 - total flux cleaned = -0.00474868 Jy ! Component: 2900 - total flux cleaned = -0.00483511 Jy ! Component: 2950 - total flux cleaned = -0.00495496 Jy ! Component: 3000 - total flux cleaned = -0.00502311 Jy ! Component: 3050 - total flux cleaned = -0.00515841 Jy ! Component: 3100 - total flux cleaned = -0.00519196 Jy ! Component: 3150 - total flux cleaned = -0.00532547 Jy ! Component: 3200 - total flux cleaned = -0.00545804 Jy ! Component: 3250 - total flux cleaned = -0.00552375 Jy ! Component: 3300 - total flux cleaned = -0.00563843 Jy ! Component: 3350 - total flux cleaned = -0.00573612 Jy ! Component: 3400 - total flux cleaned = -0.00583341 Jy ! Component: 3450 - total flux cleaned = -0.00599436 Jy ! Component: 3500 - total flux cleaned = -0.00609045 Jy ! Component: 3550 - total flux cleaned = -0.00617001 Jy ! Component: 3600 - total flux cleaned = -0.00634388 Jy ! Component: 3650 - total flux cleaned = -0.00643813 Jy ! Component: 3700 - total flux cleaned = -0.0065319 Jy ! Component: 3750 - total flux cleaned = -0.00664062 Jy ! Component: 3800 - total flux cleaned = -0.00676417 Jy ! Component: 3850 - total flux cleaned = -0.00685624 Jy ! Component: 3900 - total flux cleaned = -0.00697834 Jy ! Component: 3950 - total flux cleaned = -0.0070695 Jy ! Component: 4000 - total flux cleaned = -0.00720531 Jy ! Component: 4050 - total flux cleaned = -0.00732528 Jy ! Total flux subtracted in 4096 components = -0.00737017 Jy ! Clean residual min=-0.000784 max=0.000929 Jy/beam ! Clean residual mean=-0.000015 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 1.43207 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 403 components and 1.43207 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J1939-1525_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.629 x 4.255 at -5.765 degrees (North through East) ! Clean map min=-0.0018567 max=1.3286 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1939-1525_C_map.fits wmodel /vlbi/sb072/temp_maps//J1939-1525_C_map.mod ! Writing 403 model components to file: /vlbi/sb072/temp_maps//J1939-1525_C_map.mod wobs /vlbi/sb072/temp_maps//J1939-1525_C_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J1939-1525_C_uvs.fits wwins /vlbi/sb072/temp_maps//J1939-1525_C_map.win ! wwins: Wrote 7 windows to /vlbi/sb072/temp_maps//J1939-1525_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.32861 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253211 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0571748 0.0571748 0.11435 0.228699 0.457399 0.914797 1.82959 3.65919 7.31838 14.6368 29.2735 58.547 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.328 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5247.06 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J1939-1525_C_dfm.log closed on Sat Dec 15 22:38:12 2018