! Started logfile: /vlbi/sb072/temp_maps//J1934-2419_X_dfm.log on Tue Mar  5 23:31:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/sb072/temp_maps//J1934-2419_X_uvm.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J1934-2419_X_uvm.fits
! AN table 1: 23 integrations on 3 of 3 possible baselines.
! AN table 2: 23 integrations on 10 of 10 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1934-2419
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 2392 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1934-2419_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.000252Jy  sigma=39.430133
! Fit after  self-cal, rms=0.990057Jy  sigma=39.027735
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.636 mas, bmaj=10.58 mas, bpa=-1.546 degrees
! Estimated noise=0.735398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0078009 Jy
! Component: 100  -  total flux cleaned = 0.010101 Jy
! Total flux subtracted in 100 components = 0.010101 Jy
! Clean residual min=-0.001248 max=0.001251 Jy/beam
! Clean residual mean=-0.000004 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.010101 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.010101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016607Jy  sigma=0.629346
! Fit after  self-cal, rms=0.015112Jy  sigma=0.572106
! Inverting map 
! Added new window around map position (0, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0029855 Jy
! Component: 100  -  total flux cleaned = 0.00391136 Jy
! Total flux subtracted in 100 components = 0.00391136 Jy
! Clean residual min=-0.001351 max=0.001174 Jy/beam
! Clean residual mean=0.000000 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0140123 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.0140123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014593Jy  sigma=0.552401
! Fit after  self-cal, rms=0.014580Jy  sigma=0.551852
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.922 mas, bmaj=10.52 mas, bpa=-0.8222 degrees
! Estimated noise=0.371035 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172613 Jy
! Component: 100  -  total flux cleaned = -0.000318216 Jy
! Component: 150  -  total flux cleaned = -0.000420505 Jy
! Component: 200  -  total flux cleaned = -0.000422308 Jy
! Total flux subtracted in 200 components = -0.000422308 Jy
! Clean residual min=-0.000942 max=0.000791 Jy/beam
! Clean residual mean=0.000001 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.01359 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 62 components and 0.01359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014513Jy  sigma=0.549489
! Fit after  self-cal, rms=0.014466Jy  sigma=0.549163
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.922 x 10.52 at -0.8222 degrees (North through East)
! Clean map  min=-0.0010796  max=0.011832 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     KP        0.96     LA        1.11     NL        1.19     
!   OV        0.92     
! 
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.25     KP        1.21     LA        1.10     NL        0.78     
!   OV        1.01     
! 
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.89     KP        1.17     LA        1.13     NL        0.92     
!   OV        1.10     
! 
! 
! Correcting IF 4.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.94     KP        1.05     LA        1.20     NL        0.87     
!   OV        1.04     
! 
! 
! Correcting IF 5.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.08     KP        0.94     LA        1.09     NL        0.77     
!   OV        1.10     
! 
! 
! Correcting IF 6.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     KP        1.17     LA        1.04     NL        0.76     
!   OV        1.00     
! 
! 
! Correcting IF 7.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.04     LA        1.05     NL        0.87     
!   OV        0.98     
! 
! 
! Correcting IF 8.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     KP        1.14     LA        1.11     NL        0.94     
!   OV        0.85     
! 
! 
! Fit before self-cal, rms=0.014466Jy  sigma=0.549163
! Fit after  self-cal, rms=0.015389Jy  sigma=0.566152
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.464 mas, bmaj=9.766 mas, bpa=-1.75 degrees
! Estimated noise=0.437498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.46807e-05 Jy
! Component: 100  -  total flux cleaned = 8.12667e-05 Jy
! Component: 150  -  total flux cleaned = 6.33493e-05 Jy
! Component: 200  -  total flux cleaned = 7.24257e-05 Jy
! Total flux subtracted in 200 components = 7.24257e-05 Jy
! Clean residual min=-0.000560 max=0.000659 Jy/beam
! Clean residual mean=0.000000 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0136624 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.0136624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015381Jy  sigma=0.565920
! Fit after  self-cal, rms=0.015445Jy  sigma=0.564155
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015445Jy  sigma=0.564155
! Fit after  self-cal, rms=0.015807Jy  sigma=0.563509
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.436 mas, bmaj=9.722 mas, bpa=-1.965 degrees
! Estimated noise=0.439384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.13406e-05 Jy
! Component: 100  -  total flux cleaned = -2.8683e-05 Jy
! Component: 150  -  total flux cleaned = -1.28817e-05 Jy
! Component: 200  -  total flux cleaned = 1.52347e-05 Jy
! Total flux subtracted in 200 components = 1.52347e-05 Jy
! Clean residual min=-0.000600 max=0.000655 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0136777 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 91 components and 0.0136777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015801Jy  sigma=0.563362
! Fit after  self-cal, rms=0.015859Jy  sigma=0.562699
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000151431 Jy
! Component: 100  -  total flux cleaned = -0.000150751 Jy
! Component: 150  -  total flux cleaned = -0.000169351 Jy
! Component: 200  -  total flux cleaned = -0.000207915 Jy
! Total flux subtracted in 200 components = -0.000207915 Jy
! Clean residual min=-0.000646 max=0.000654 Jy/beam
! Clean residual mean=0.000000 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.0134698 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 107 components and 0.0134698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015851Jy  sigma=0.562479
! Fit after  self-cal, rms=0.015844Jy  sigma=0.562285
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015844Jy  sigma=0.562285
! Fit after  self-cal, rms=0.016135Jy  sigma=0.562114
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.432 mas, bmaj=9.697 mas, bpa=-2.031 degrees
! Estimated noise=0.441739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.23532e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139374 Jy
! Component: 150  -  total flux cleaned = 0.000160662 Jy
! Component: 200  -  total flux cleaned = 0.000179371 Jy
! Total flux subtracted in 200 components = 0.000179371 Jy
! Clean residual min=-0.000603 max=0.000650 Jy/beam
! Clean residual mean=0.000000 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0136491 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 112 components and 0.0136491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016130Jy  sigma=0.561986
! Fit after  self-cal, rms=0.016165Jy  sigma=0.561691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.07605e-05 Jy
! Component: 100  -  total flux cleaned = -1.52893e-05 Jy
! Component: 150  -  total flux cleaned = -2.1684e-06 Jy
! Component: 200  -  total flux cleaned = 9.33263e-06 Jy
! Total flux subtracted in 200 components = 9.33263e-06 Jy
! Clean residual min=-0.000594 max=0.000632 Jy/beam
! Clean residual mean=0.000000 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0136585 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 126 components and 0.0136585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016162Jy  sigma=0.561604
! Fit after  self-cal, rms=0.016163Jy  sigma=0.561565
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016163Jy  sigma=0.561565
! Fit after  self-cal, rms=0.016339Jy  sigma=0.561505
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.696 mas, bmaj=9.589 mas, bpa=-1.814 degrees
! Estimated noise=0.451274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.48415e-05 Jy
! Component: 100  -  total flux cleaned = 2.2629e-05 Jy
! Component: 150  -  total flux cleaned = 4.26404e-05 Jy
! Component: 200  -  total flux cleaned = 6.34219e-05 Jy
! Total flux subtracted in 200 components = 6.34219e-05 Jy
! Clean residual min=-0.000587 max=0.000543 Jy/beam
! Clean residual mean=0.000000 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.0137219 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 126 components and 0.0137219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016337Jy  sigma=0.561429
! Fit after  self-cal, rms=0.016356Jy  sigma=0.561300
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.51264e-05 Jy
! Component: 100  -  total flux cleaned = -7.86591e-05 Jy
! Component: 150  -  total flux cleaned = -9.0438e-05 Jy
! Component: 200  -  total flux cleaned = -9.72148e-05 Jy
! Total flux subtracted in 200 components = -9.72148e-05 Jy
! Clean residual min=-0.000597 max=0.000540 Jy/beam
! Clean residual mean=0.000000 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.0136247 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 137 components and 0.0136247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016353Jy  sigma=0.561235
! Fit after  self-cal, rms=0.016353Jy  sigma=0.561214
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.433 mas, bmaj=9.685 mas, bpa=-2.054 degrees
! Estimated noise=0.442573 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.433 x 9.685 at -2.054 degrees (North through East)
! Clean map  min=-0.000946  max=0.011507 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=9.835 mas, bpa=-2.102 degrees
! Estimated noise=0.911634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00922907 Jy
! Component: 100  -  total flux cleaned = 0.0102744 Jy
! Component: 150  -  total flux cleaned = 0.0109775 Jy
! Component: 200  -  total flux cleaned = 0.01104 Jy
! Total flux subtracted in 200 components = 0.01104 Jy
! Clean residual min=-0.001475 max=0.001591 Jy/beam
! Clean residual mean=0.000000 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.01104 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.01104 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.433 mas, bmaj=9.685 mas, bpa=-2.054 degrees
! Estimated noise=0.442573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012767 Jy
! Component: 100  -  total flux cleaned = -0.000396676 Jy
! Component: 150  -  total flux cleaned = -0.000559145 Jy
! Component: 200  -  total flux cleaned = -0.000759977 Jy
! Total flux subtracted in 200 components = -0.000759977 Jy
! Clean residual min=-0.000788 max=0.000738 Jy/beam
! Clean residual mean=0.000000 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.01028 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 49 components and 0.01028 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.696 mas, bmaj=9.589 mas, bpa=-1.814 degrees
! Estimated noise=0.451274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271472 Jy
! Component: 100  -  total flux cleaned = -0.000368421 Jy
! Component: 150  -  total flux cleaned = -0.000441877 Jy
! Component: 200  -  total flux cleaned = -0.000518124 Jy
! Total flux subtracted in 200 components = -0.000518124 Jy
! Clean residual min=-0.000661 max=0.000591 Jy/beam
! Clean residual mean=0.000000 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.00976192 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.7055e-05 Jy
! Component: 100  -  total flux cleaned = -0.000125846 Jy
! Component: 150  -  total flux cleaned = -0.000177684 Jy
! Component: 200  -  total flux cleaned = -0.000224093 Jy
! Total flux subtracted in 200 components = -0.000224093 Jy
! Clean residual min=-0.000628 max=0.000569 Jy/beam
! Clean residual mean=0.000000 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.00953783 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 74 components and 0.00953783 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.433 mas, bmaj=9.685 mas, bpa=-2.054 degrees
! Estimated noise=0.442573 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.12021e-07 Jy
! Component: 100  -  total flux cleaned = -6.64177e-05 Jy
! Component: 150  -  total flux cleaned = -0.000119376 Jy
! Component: 200  -  total flux cleaned = -0.000170699 Jy
! Total flux subtracted in 200 components = -0.000170699 Jy
! Clean residual min=-0.000650 max=0.000603 Jy/beam
! Clean residual mean=0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.00936713 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 93 components and 0.00936713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016361Jy  sigma=0.561801
! Fit after  self-cal, rms=0.016350Jy  sigma=0.561262
wmodel J1934-2419_X_map.mod
! Writing 93 model components to file: J1934-2419_X_map.mod
wobs   J1934-2419_X_uvs.fits
! Writing UV FITS file: J1934-2419_X_uvs.fits
wwins  J1934-2419_X_map.win
! wwins: Wrote 1 windows to J1934-2419_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.34805e-05 Jy
! Component: 100  -  total flux cleaned = 6.167e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100701 Jy
! Component: 200  -  total flux cleaned = 0.000136244 Jy
! Component: 250  -  total flux cleaned = 0.000187296 Jy
! Component: 300  -  total flux cleaned = 0.000222451 Jy
! Component: 350  -  total flux cleaned = 0.000238863 Jy
! Component: 400  -  total flux cleaned = 0.000238809 Jy
! Component: 450  -  total flux cleaned = 0.00025737 Jy
! Component: 500  -  total flux cleaned = 0.000248726 Jy
! Component: 550  -  total flux cleaned = 0.000231815 Jy
! Component: 600  -  total flux cleaned = 0.000203134 Jy
! Component: 650  -  total flux cleaned = 0.000183298 Jy
! Component: 700  -  total flux cleaned = 0.000152386 Jy
! Component: 750  -  total flux cleaned = 0.000129496 Jy
! Component: 800  -  total flux cleaned = 0.000114382 Jy
! Component: 850  -  total flux cleaned = 9.18785e-05 Jy
! Component: 900  -  total flux cleaned = 8.07078e-05 Jy
! Component: 950  -  total flux cleaned = 6.20579e-05 Jy
! Component: 1000  -  total flux cleaned = 4.7051e-05 Jy
! Component: 1050  -  total flux cleaned = 3.19895e-05 Jy
! Component: 1100  -  total flux cleaned = 1.30683e-05 Jy
! Component: 1150  -  total flux cleaned = -9.92102e-06 Jy
! Component: 1200  -  total flux cleaned = -2.15052e-05 Jy
! Component: 1250  -  total flux cleaned = -3.7203e-05 Jy
! Component: 1300  -  total flux cleaned = -4.91177e-05 Jy
! Component: 1350  -  total flux cleaned = -4.10279e-05 Jy
! Component: 1400  -  total flux cleaned = -3.67965e-05 Jy
! Component: 1450  -  total flux cleaned = -3.24515e-05 Jy
! Component: 1500  -  total flux cleaned = -2.80049e-05 Jy
! Component: 1550  -  total flux cleaned = -2.34599e-05 Jy
! Component: 1600  -  total flux cleaned = -1.87667e-05 Jy
! Component: 1650  -  total flux cleaned = -9.01979e-06 Jy
! Component: 1700  -  total flux cleaned = -9.05692e-06 Jy
! Component: 1750  -  total flux cleaned = 6.4061e-06 Jy
! Component: 1800  -  total flux cleaned = 1.17296e-05 Jy
! Component: 1850  -  total flux cleaned = 2.26455e-05 Jy
! Component: 1900  -  total flux cleaned = 3.3939e-05 Jy
! Component: 1950  -  total flux cleaned = 4.57773e-05 Jy
! Component: 2000  -  total flux cleaned = 5.79181e-05 Jy
! Component: 2050  -  total flux cleaned = 6.42549e-05 Jy
! Component: 2100  -  total flux cleaned = 7.71811e-05 Jy
! Component: 2150  -  total flux cleaned = 9.06439e-05 Jy
! Component: 2200  -  total flux cleaned = 9.76075e-05 Jy
! Component: 2250  -  total flux cleaned = 0.000111789 Jy
! Component: 2300  -  total flux cleaned = 0.000126564 Jy
! Component: 2350  -  total flux cleaned = 0.000134168 Jy
! Component: 2400  -  total flux cleaned = 0.000149784 Jy
! Component: 2450  -  total flux cleaned = 0.000166162 Jy
! Component: 2500  -  total flux cleaned = 0.000183087 Jy
! Component: 2550  -  total flux cleaned = 0.000191933 Jy
! Component: 2600  -  total flux cleaned = 0.000209925 Jy
! Component: 2650  -  total flux cleaned = 0.000219064 Jy
! Component: 2700  -  total flux cleaned = 0.000238289 Jy
! Component: 2750  -  total flux cleaned = 0.000248327 Jy
! Component: 2800  -  total flux cleaned = 0.000258436 Jy
! Component: 2850  -  total flux cleaned = 0.000269132 Jy
! Component: 2900  -  total flux cleaned = 0.000280214 Jy
! Component: 2950  -  total flux cleaned = 0.000291789 Jy
! Component: 3000  -  total flux cleaned = 0.0003037 Jy
! Component: 3050  -  total flux cleaned = 0.000316111 Jy
! Component: 3100  -  total flux cleaned = 0.000316169 Jy
! Component: 3150  -  total flux cleaned = 0.000329231 Jy
! Component: 3200  -  total flux cleaned = 0.000342897 Jy
! Component: 3250  -  total flux cleaned = 0.000357089 Jy
! Component: 3300  -  total flux cleaned = 0.000356999 Jy
! Component: 3350  -  total flux cleaned = 0.000372066 Jy
! Component: 3400  -  total flux cleaned = 0.000387622 Jy
! Component: 3450  -  total flux cleaned = 0.000387586 Jy
! Component: 3500  -  total flux cleaned = 0.000404422 Jy
! Component: 3550  -  total flux cleaned = 0.000404533 Jy
! Component: 3600  -  total flux cleaned = 0.000422511 Jy
! Component: 3650  -  total flux cleaned = 0.000422816 Jy
! Component: 3700  -  total flux cleaned = 0.000442093 Jy
! Component: 3750  -  total flux cleaned = 0.000441805 Jy
! Component: 3800  -  total flux cleaned = 0.000462506 Jy
! Component: 3850  -  total flux cleaned = 0.00046273 Jy
! Component: 3900  -  total flux cleaned = 0.000484391 Jy
! Component: 3950  -  total flux cleaned = 0.000530001 Jy
! Component: 4000  -  total flux cleaned = 0.000554316 Jy
! Component: 4050  -  total flux cleaned = 0.000579309 Jy
! Total flux subtracted in 4096 components = 0.000579121 Jy
! Clean residual min=-0.001423 max=0.001367 Jy/beam
! Clean residual mean=-0.000002 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.00994625 Jy
keep
! Adding 153 model components to the UV plane model.
! The established model now contains 246 components and 0.00994625 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/sb072/temp_maps//J1934-2419_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.433 x 9.685 at -2.054 degrees (North through East)
! Clean map  min=-0.0037645  max=0.011339 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1934-2419_X_map.fits
wmodel /vlbi/sb072/temp_maps//J1934-2419_X_map.mod
! Writing 246 model components to file: /vlbi/sb072/temp_maps//J1934-2419_X_map.mod
wobs   /vlbi/sb072/temp_maps//J1934-2419_X_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J1934-2419_X_uvs.fits
wwins  /vlbi/sb072/temp_maps//J1934-2419_X_map.win
! wwins: Wrote 2 windows to /vlbi/sb072/temp_maps//J1934-2419_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0113387 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000460645 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -12.1877 12.1877 24.3755 48.751 97.5019
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.011 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  24.614 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J1934-2419_X_dfm.log closed on Tue Mar  5 23:31:26 2019