! Started logfile: .//J1927+7358_X_dfm.log on Sun Oct 21 00:06:32 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J1927+7358_X_uvm.fits ! Reading UV FITS file: .//J1927+7358_X_uvm.fits ! AN table 1: 3 integrations on 10 of 10 possible baselines. ! AN table 2: 6 integrations on 45 of 45 possible baselines. ! AN table 3: 6 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1.61502 visibilities/baseline/integration-bin. ! Found source: J1927+7358 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 5504 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1927+7358_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.443764Jy sigma=165.825875 ! Fit after self-cal, rms=2.315526Jy sigma=110.921605 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7197 mas, bmaj=2.456 mas, bpa=17.74 degrees ! Estimated noise=0.41236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31755 Jy ! Component: 100 - total flux cleaned = 2.97204 Jy ! Total flux subtracted in 100 components = 2.97204 Jy ! Clean residual min=-0.113045 max=0.289729 Jy/beam ! Clean residual mean=0.000893 rms=0.024541 Jy/beam ! Combined flux in latest and established models = 2.97204 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.97204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.692850Jy sigma=33.023547 ! Fit after self-cal, rms=0.692389Jy sigma=32.996018 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31074 Jy ! Component: 100 - total flux cleaned = 0.470937 Jy ! Total flux subtracted in 100 components = 0.470937 Jy ! Clean residual min=-0.073771 max=0.186060 Jy/beam ! Clean residual mean=0.000616 rms=0.016441 Jy/beam ! Combined flux in latest and established models = 3.44298 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 12 components and 3.44298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.487050Jy sigma=23.423893 ! Fit after self-cal, rms=0.486487Jy sigma=23.398101 ! Inverting map ! Added new window around map position (1.6, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16506 Jy ! Component: 100 - total flux cleaned = 0.260361 Jy ! Total flux subtracted in 100 components = 0.260361 Jy ! Clean residual min=-0.063571 max=0.079484 Jy/beam ! Clean residual mean=0.000473 rms=0.012805 Jy/beam ! Combined flux in latest and established models = 3.70334 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 3.70334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.404811Jy sigma=19.523456 ! Fit after self-cal, rms=0.400926Jy sigma=19.343681 ! Inverting map ! Added new window around map position (-4.6, -5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0846147 Jy ! Component: 100 - total flux cleaned = 0.139545 Jy ! Total flux subtracted in 100 components = 0.139545 Jy ! Clean residual min=-0.056436 max=0.068641 Jy/beam ! Clean residual mean=0.000411 rms=0.011168 Jy/beam ! Combined flux in latest and established models = 3.84288 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 3.84288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.375361Jy sigma=18.289595 ! Fit after self-cal, rms=0.374214Jy sigma=18.230786 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9215 mas, bmaj=2.697 mas, bpa=17.4 degrees ! Estimated noise=0.273582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0914945 Jy ! Component: 100 - total flux cleaned = 0.150396 Jy ! Component: 150 - total flux cleaned = 0.194699 Jy ! Component: 200 - total flux cleaned = 0.229039 Jy ! Total flux subtracted in 200 components = 0.229039 Jy ! Clean residual min=-0.044703 max=0.076286 Jy/beam ! Clean residual mean=0.000828 rms=0.013431 Jy/beam ! Combined flux in latest and established models = 4.07192 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 4.07192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.345561Jy sigma=17.014523 ! Fit after self-cal, rms=0.342668Jy sigma=16.887116 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9215 x 2.697 at 17.4 degrees (North through East) ! Clean map min=-0.041967 max=3.1508 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 1.05 NL 1.08 OV 1.04 ! PT 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.02 HN 0.91 KP 1.03 ! LA 0.97 MK 1.00 NL 0.98 OV 1.00 ! PT 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.08 KP 0.99 LA 1.02 MK 1.01 ! NL 1.08 OV 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 KP 1.05 NL 1.12 OV 1.00 ! PT 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.86 HN 1.10 KP 1.07 ! LA 1.09 MK 1.16 NL 1.14 OV 1.16 ! PT 1.08 SC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.06 KP 0.99 LA 1.01 MK 1.00 ! NL 1.07 OV 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 1.04 NL 1.11 OV 1.04 ! PT 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.09 HN 0.95 KP 0.92 ! LA 0.96 MK 1.02 NL 0.98 OV 0.97 ! PT 0.91 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 KP 0.98 LA 1.01 MK 1.01 ! NL 1.08 OV 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 1.05 NL 1.09 OV 1.03 ! PT 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.02 HN 0.99 KP 0.91 ! LA 0.98 MK 1.03 NL 0.97 OV 0.99 ! PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.06 KP 0.98 LA 1.01 MK 1.04 ! NL 1.06 OV 1.00 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 KP 1.06 NL 1.08 OV 1.01 ! PT 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.05 HN 0.92 KP 0.94 ! LA 0.98 MK 0.99 NL 1.02 OV 0.98 ! PT 0.94 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 KP 0.98 LA 1.00 MK 1.02 ! NL 1.06 OV 1.00 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 1.06 NL 1.11 OV 1.03 ! PT 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.07 HN 0.95 KP 0.98 ! LA 1.01 MK 1.01 NL 1.05 OV 0.99 ! PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 KP 0.98 LA 1.00 MK 0.99 ! NL 1.07 OV 0.99 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 KP 1.05 NL 1.11 OV 1.01 ! PT 1.18 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.01 HN 0.93 KP 0.90 ! LA 0.99 MK 0.99 NL 0.93 OV 1.01 ! PT 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 KP 0.99 LA 1.00 MK 1.02 ! NL 1.06 OV 0.98 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 1.05 NL 1.11 OV 1.04 ! PT 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 0.94 KP 0.85 ! LA 1.00 MK 0.99 NL 0.92 OV 0.94 ! PT 0.87 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.06 KP 0.97 LA 1.00 MK 1.02 ! NL 1.06 OV 0.98 SC 1.01 ! ! ! Fit before self-cal, rms=0.342668Jy sigma=16.887116 ! Fit after self-cal, rms=0.097085Jy sigma=4.526444 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9246 mas, bmaj=2.71 mas, bpa=17.45 degrees ! Estimated noise=0.272945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268977 Jy ! Component: 100 - total flux cleaned = 0.0323954 Jy ! Component: 150 - total flux cleaned = 0.0325906 Jy ! Component: 200 - total flux cleaned = 0.0314399 Jy ! Total flux subtracted in 200 components = 0.0314399 Jy ! Clean residual min=-0.015881 max=0.019460 Jy/beam ! Clean residual mean=0.000103 rms=0.003590 Jy/beam ! Combined flux in latest and established models = 4.10336 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 4.10336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.078460Jy sigma=3.575243 ! Fit after self-cal, rms=0.076130Jy sigma=3.484387 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.076130Jy sigma=3.484387 ! Fit after self-cal, rms=0.074274Jy sigma=3.404889 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=2.711 mas, bpa=17.43 degrees ! Estimated noise=0.272828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781463 Jy ! Component: 100 - total flux cleaned = 0.00885634 Jy ! Component: 150 - total flux cleaned = 0.00838487 Jy ! Component: 200 - total flux cleaned = 0.00876865 Jy ! Total flux subtracted in 200 components = 0.00876865 Jy ! Clean residual min=-0.012071 max=0.014827 Jy/beam ! Clean residual mean=0.000072 rms=0.002855 Jy/beam ! Combined flux in latest and established models = 4.11213 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 4.11213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.066860Jy sigma=3.030776 ! Fit after self-cal, rms=0.066142Jy sigma=3.001826 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142341 Jy ! Component: 100 - total flux cleaned = 0.0184937 Jy ! Component: 150 - total flux cleaned = 0.019927 Jy ! Component: 200 - total flux cleaned = 0.0195981 Jy ! Total flux subtracted in 200 components = 0.0195981 Jy ! Clean residual min=-0.010078 max=0.013551 Jy/beam ! Clean residual mean=0.000037 rms=0.002460 Jy/beam ! Combined flux in latest and established models = 4.13173 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 87 components and 4.13173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.061241Jy sigma=2.749452 ! Fit after self-cal, rms=0.060944Jy sigma=2.737863 ! Inverting map ! Added new window around map position (-5, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132536 Jy ! Component: 100 - total flux cleaned = 0.0162426 Jy ! Component: 150 - total flux cleaned = 0.0185329 Jy ! Component: 200 - total flux cleaned = 0.0200453 Jy ! Total flux subtracted in 200 components = 0.0200453 Jy ! Clean residual min=-0.009452 max=0.009470 Jy/beam ! Clean residual mean=0.000017 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 4.15177 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 106 components and 4.15177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056217Jy sigma=2.532728 ! Fit after self-cal, rms=0.056147Jy sigma=2.529287 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056147Jy sigma=2.529287 ! Fit after self-cal, rms=0.054685Jy sigma=2.447407 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9251 mas, bmaj=2.711 mas, bpa=17.42 degrees ! Estimated noise=0.272867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157741 Jy ! Component: 100 - total flux cleaned = 0.00509128 Jy ! Component: 150 - total flux cleaned = 0.00668256 Jy ! Component: 200 - total flux cleaned = 0.008663 Jy ! Total flux subtracted in 200 components = 0.008663 Jy ! Clean residual min=-0.008501 max=0.009209 Jy/beam ! Clean residual mean=0.000012 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 4.16044 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 121 components and 4.16044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.051970Jy sigma=2.317510 ! Fit after self-cal, rms=0.051902Jy sigma=2.313722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573729 Jy ! Component: 100 - total flux cleaned = 0.00549838 Jy ! Component: 150 - total flux cleaned = 0.00527322 Jy ! Component: 200 - total flux cleaned = 0.00506517 Jy ! Total flux subtracted in 200 components = 0.00506517 Jy ! Clean residual min=-0.007634 max=0.007722 Jy/beam ! Clean residual mean=0.000001 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 4.1655 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 128 components and 4.1655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.049664Jy sigma=2.204642 ! Fit after self-cal, rms=0.049645Jy sigma=2.203214 ! Inverting map ! Added new window around map position (8.6, 12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043662 Jy ! Component: 100 - total flux cleaned = 0.00457304 Jy ! Component: 150 - total flux cleaned = 0.00516003 Jy ! Component: 200 - total flux cleaned = 0.00515871 Jy ! Total flux subtracted in 200 components = 0.00515871 Jy ! Clean residual min=-0.007159 max=0.006612 Jy/beam ! Clean residual mean=0.000000 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 4.17066 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 145 components and 4.17066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.047907Jy sigma=2.121760 ! Fit after self-cal, rms=0.047868Jy sigma=2.120160 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.047868Jy sigma=2.120160 ! Fit after self-cal, rms=0.046912Jy sigma=2.064389 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=3.271 mas, bpa=15.62 degrees ! Estimated noise=0.33774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222728 Jy ! Component: 100 - total flux cleaned = 0.0029447 Jy ! Component: 150 - total flux cleaned = 0.00405592 Jy ! Component: 200 - total flux cleaned = 0.00446794 Jy ! Total flux subtracted in 200 components = 0.00446794 Jy ! Clean residual min=-0.007928 max=0.007519 Jy/beam ! Clean residual mean=-0.000004 rms=0.001959 Jy/beam ! Combined flux in latest and established models = 4.17513 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 174 components and 4.17513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046264Jy sigma=2.027101 ! Fit after self-cal, rms=0.046245Jy sigma=2.023828 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000609071 Jy ! Component: 100 - total flux cleaned = -0.000240219 Jy ! Component: 150 - total flux cleaned = 0.000212972 Jy ! Component: 200 - total flux cleaned = 0.000424879 Jy ! Total flux subtracted in 200 components = 0.000424879 Jy ! Clean residual min=-0.007630 max=0.007104 Jy/beam ! Clean residual mean=-0.000008 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 4.17555 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 191 components and 4.17555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.045997Jy sigma=2.009475 ! Fit after self-cal, rms=0.045992Jy sigma=2.008225 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=2.711 mas, bpa=17.41 degrees ! Estimated noise=0.27281 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.925 x 2.711 at 17.41 degrees (North through East) ! Clean map min=-0.0077853 max=3.1463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.045992Jy sigma=2.008225 ! Fit after self-cal, rms=0.041407Jy sigma=1.775382 ! Inverting map and beam ! Estimated beam: bmin=0.9251 mas, bmaj=2.711 mas, bpa=17.4 degrees ! Estimated noise=0.272908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191022 Jy ! Component: 100 - total flux cleaned = 0.00156398 Jy ! Component: 150 - total flux cleaned = 0.00187094 Jy ! Component: 200 - total flux cleaned = 0.00276356 Jy ! Total flux subtracted in 200 components = 0.00276356 Jy ! Clean residual min=-0.005953 max=0.005138 Jy/beam ! Clean residual mean=0.000000 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 4.17832 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 205 components and 4.17832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040145Jy sigma=1.714974 ! Fit after self-cal, rms=0.040125Jy sigma=1.714010 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.16384e-05 Jy ! Component: 100 - total flux cleaned = 0.000396869 Jy ! Component: 150 - total flux cleaned = 0.00106682 Jy ! Component: 200 - total flux cleaned = 0.00158402 Jy ! Total flux subtracted in 200 components = 0.00158402 Jy ! Clean residual min=-0.005835 max=0.004890 Jy/beam ! Clean residual mean=-0.000001 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 4.1799 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 215 components and 4.1799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039286Jy sigma=1.675005 ! Fit after self-cal, rms=0.039286Jy sigma=1.674410 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039286Jy sigma=1.674410 ! Fit after self-cal, rms=0.039205Jy sigma=1.671737 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7213 mas, bmaj=2.472 mas, bpa=17.79 degrees ! Estimated noise=0.411287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31286 Jy ! Component: 100 - total flux cleaned = 2.96409 Jy ! Component: 150 - total flux cleaned = 3.28438 Jy ! Component: 200 - total flux cleaned = 3.47963 Jy ! Total flux subtracted in 200 components = 3.47963 Jy ! Clean residual min=-0.056649 max=0.104962 Jy/beam ! Clean residual mean=0.000415 rms=0.011018 Jy/beam ! Combined flux in latest and established models = 3.47963 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 3.47963 Jy ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=2.711 mas, bpa=17.4 degrees ! Estimated noise=0.272892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193536 Jy ! Component: 100 - total flux cleaned = 0.319912 Jy ! Component: 150 - total flux cleaned = 0.405586 Jy ! Component: 200 - total flux cleaned = 0.464604 Jy ! Total flux subtracted in 200 components = 0.464604 Jy ! Clean residual min=-0.019008 max=0.033106 Jy/beam ! Clean residual mean=0.000381 rms=0.005760 Jy/beam ! Combined flux in latest and established models = 3.94423 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 3.94423 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429307 Jy ! Component: 100 - total flux cleaned = 0.0754905 Jy ! Component: 150 - total flux cleaned = 0.100829 Jy ! Component: 200 - total flux cleaned = 0.116456 Jy ! Total flux subtracted in 200 components = 0.116456 Jy ! Clean residual min=-0.013610 max=0.014173 Jy/beam ! Clean residual mean=0.000174 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 4.06069 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 4.06069 Jy ! Inverting map ! Added new window around map position (2.2, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130591 Jy ! Component: 100 - total flux cleaned = 0.0257064 Jy ! Component: 150 - total flux cleaned = 0.0363486 Jy ! Component: 200 - total flux cleaned = 0.0458353 Jy ! Total flux subtracted in 200 components = 0.0458353 Jy ! Clean residual min=-0.008793 max=0.009884 Jy/beam ! Clean residual mean=0.000105 rms=0.002155 Jy/beam ! Combined flux in latest and established models = 4.10652 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 64 components and 4.10652 Jy ! Inverting map ! Added new window around map position (-6.4, 27.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00889152 Jy ! Component: 100 - total flux cleaned = 0.0150373 Jy ! Component: 150 - total flux cleaned = 0.0199098 Jy ! Component: 200 - total flux cleaned = 0.0237522 Jy ! Total flux subtracted in 200 components = 0.0237522 Jy ! Clean residual min=-0.007474 max=0.008191 Jy/beam ! Clean residual mean=0.000068 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 4.13027 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 87 components and 4.13027 Jy ! Inverting map ! Added new window around map position (4.6, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587008 Jy ! Component: 100 - total flux cleaned = 0.00804058 Jy ! Component: 150 - total flux cleaned = 0.0109418 Jy ! Component: 200 - total flux cleaned = 0.0128463 Jy ! Total flux subtracted in 200 components = 0.0128463 Jy ! Clean residual min=-0.006808 max=0.006360 Jy/beam ! Clean residual mean=0.000048 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 4.14312 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 105 components and 4.14312 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.1 mas, bmaj=3.271 mas, bpa=15.61 degrees ! Estimated noise=0.337898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555776 Jy ! Component: 100 - total flux cleaned = 0.0101509 Jy ! Component: 150 - total flux cleaned = 0.0132 Jy ! Component: 200 - total flux cleaned = 0.0162379 Jy ! Total flux subtracted in 200 components = 0.0162379 Jy ! Clean residual min=-0.006646 max=0.006229 Jy/beam ! Clean residual mean=0.000038 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 4.15936 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228794 Jy ! Component: 100 - total flux cleaned = 0.00369975 Jy ! Component: 150 - total flux cleaned = 0.00461823 Jy ! Component: 200 - total flux cleaned = 0.00547905 Jy ! Total flux subtracted in 200 components = 0.00547905 Jy ! Clean residual min=-0.006277 max=0.005937 Jy/beam ! Clean residual mean=0.000021 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 4.16484 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 165 components and 4.16484 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=2.711 mas, bpa=17.4 degrees ! Estimated noise=0.272892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108668 Jy ! Component: 100 - total flux cleaned = -0.00107877 Jy ! Component: 150 - total flux cleaned = -0.00107469 Jy ! Component: 200 - total flux cleaned = -0.00127602 Jy ! Total flux subtracted in 200 components = -0.00127602 Jy ! Clean residual min=-0.005394 max=0.005148 Jy/beam ! Clean residual mean=0.000012 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 4.16356 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 186 components and 4.16356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042479Jy sigma=1.779147 ! Fit after self-cal, rms=0.042099Jy sigma=1.753259 wmodel J1927+7358_X_map.mod ! Writing 186 model components to file: J1927+7358_X_map.mod wobs J1927+7358_X_uvs.fits ! Writing UV FITS file: J1927+7358_X_uvs.fits wwins J1927+7358_X_map.win ! wwins: Wrote 10 windows to J1927+7358_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219774 Jy ! Component: 100 - total flux cleaned = 0.000250852 Jy ! Component: 150 - total flux cleaned = 0.00141765 Jy ! Component: 200 - total flux cleaned = 0.00237265 Jy ! Component: 250 - total flux cleaned = 0.00321759 Jy ! Component: 300 - total flux cleaned = 0.00403861 Jy ! Component: 350 - total flux cleaned = 0.00468088 Jy ! Component: 400 - total flux cleaned = 0.00523011 Jy ! Component: 450 - total flux cleaned = 0.00561445 Jy ! Component: 500 - total flux cleaned = 0.00599219 Jy ! Component: 550 - total flux cleaned = 0.00636438 Jy ! Component: 600 - total flux cleaned = 0.00694613 Jy ! Component: 650 - total flux cleaned = 0.00744544 Jy ! Component: 700 - total flux cleaned = 0.00800788 Jy ! Component: 750 - total flux cleaned = 0.00848936 Jy ! Component: 800 - total flux cleaned = 0.00903193 Jy ! Component: 850 - total flux cleaned = 0.00936604 Jy ! Component: 900 - total flux cleaned = 0.00969547 Jy ! Component: 950 - total flux cleaned = 0.0100844 Jy ! Component: 1000 - total flux cleaned = 0.0104693 Jy ! Component: 1050 - total flux cleaned = 0.0106605 Jy ! Component: 1100 - total flux cleaned = 0.0110352 Jy ! Component: 1150 - total flux cleaned = 0.0115266 Jy ! Component: 1200 - total flux cleaned = 0.0117076 Jy ! Component: 1250 - total flux cleaned = 0.0121865 Jy ! Component: 1300 - total flux cleaned = 0.0124234 Jy ! Component: 1350 - total flux cleaned = 0.0127155 Jy ! Component: 1400 - total flux cleaned = 0.0130615 Jy ! Component: 1450 - total flux cleaned = 0.0132317 Jy ! Component: 1500 - total flux cleaned = 0.0135142 Jy ! Component: 1550 - total flux cleaned = 0.0137369 Jy ! Component: 1600 - total flux cleaned = 0.0138476 Jy ! Component: 1650 - total flux cleaned = 0.0140667 Jy ! Component: 1700 - total flux cleaned = 0.0143365 Jy ! Component: 1750 - total flux cleaned = 0.0145511 Jy ! Component: 1800 - total flux cleaned = 0.0148152 Jy ! Component: 1850 - total flux cleaned = 0.01492 Jy ! Component: 1900 - total flux cleaned = 0.015128 Jy ! Component: 1950 - total flux cleaned = 0.0153847 Jy ! Component: 2000 - total flux cleaned = 0.0156387 Jy ! Component: 2050 - total flux cleaned = 0.0156891 Jy ! Component: 2100 - total flux cleaned = 0.0158385 Jy ! Component: 2150 - total flux cleaned = 0.0160361 Jy ! Component: 2200 - total flux cleaned = 0.016085 Jy ! Component: 2250 - total flux cleaned = 0.0162301 Jy ! Component: 2300 - total flux cleaned = 0.0163739 Jy ! Component: 2350 - total flux cleaned = 0.0165165 Jy ! Component: 2400 - total flux cleaned = 0.0166109 Jy ! Component: 2450 - total flux cleaned = 0.0166574 Jy ! Component: 2500 - total flux cleaned = 0.0167964 Jy ! Component: 2550 - total flux cleaned = 0.0170256 Jy ! Component: 2600 - total flux cleaned = 0.0171157 Jy ! Component: 2650 - total flux cleaned = 0.0172965 Jy ! Component: 2700 - total flux cleaned = 0.0174305 Jy ! Component: 2750 - total flux cleaned = 0.0174739 Jy ! Component: 2800 - total flux cleaned = 0.0176056 Jy ! Component: 2850 - total flux cleaned = 0.0177795 Jy ! Component: 2900 - total flux cleaned = 0.0179091 Jy ! Component: 2950 - total flux cleaned = 0.0180376 Jy ! Component: 3000 - total flux cleaned = 0.0180798 Jy ! Component: 3050 - total flux cleaned = 0.0182062 Jy ! Component: 3100 - total flux cleaned = 0.0182478 Jy ! Component: 3150 - total flux cleaned = 0.0184551 Jy ! Component: 3200 - total flux cleaned = 0.0185782 Jy ! Component: 3250 - total flux cleaned = 0.0186594 Jy ! Component: 3300 - total flux cleaned = 0.0187402 Jy ! Component: 3350 - total flux cleaned = 0.0187805 Jy ! Component: 3400 - total flux cleaned = 0.01902 Jy ! Component: 3450 - total flux cleaned = 0.0191384 Jy ! Component: 3500 - total flux cleaned = 0.0192952 Jy ! Component: 3550 - total flux cleaned = 0.0194122 Jy ! Component: 3600 - total flux cleaned = 0.0195284 Jy ! Component: 3650 - total flux cleaned = 0.0196822 Jy ! Component: 3700 - total flux cleaned = 0.0197589 Jy ! Component: 3750 - total flux cleaned = 0.0199486 Jy ! Component: 3800 - total flux cleaned = 0.0200995 Jy ! Component: 3850 - total flux cleaned = 0.0201744 Jy ! Component: 3900 - total flux cleaned = 0.0202117 Jy ! Component: 3950 - total flux cleaned = 0.0203596 Jy ! Component: 4000 - total flux cleaned = 0.0204329 Jy ! Component: 4050 - total flux cleaned = 0.0205058 Jy ! Total flux subtracted in 4096 components = 0.0205781 Jy ! Clean residual min=-0.001803 max=0.001802 Jy/beam ! Clean residual mean=-0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 4.18414 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 474 components and 4.18414 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J1927+7358_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.925 x 2.711 at 17.4 degrees (North through East) ! Clean map min=-0.0051172 max=3.1534 Jy/beam ! Writing clean map to FITS file: .//J1927+7358_X_map.fits wmodel .//J1927+7358_X_map.mod ! Writing 474 model components to file: .//J1927+7358_X_map.mod wobs .//J1927+7358_X_uvs.fits ! Writing UV FITS file: .//J1927+7358_X_uvs.fits wwins .//J1927+7358_X_map.win ! wwins: Wrote 11 windows to .//J1927+7358_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 3.15337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000625182 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0594775 0.0594775 0.118955 0.23791 0.47582 0.951641 1.90328 3.80656 7.61313 15.2263 30.4525 60.905 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 3.153 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5043.92 quit ! Quitting program ! Log file .//J1927+7358_X_dfm.log closed on Sun Oct 21 00:06:37 2018