! Started logfile: /vlbi/sb072/temp_maps//J1905-1153_X_dfm.log on Tue Mar  5 23:30:09 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/sb072/temp_maps//J1905-1153_X_uvm.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J1905-1153_X_uvm.fits
! AN table 1: 6 integrations on 28 of 28 possible baselines.
! AN table 2: 13 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.916335 visibilities/baseline/integration-bin.
! Found source: J1905-1153
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 5520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1905-1153_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.011104Jy  sigma=34.087115
! Fit after  self-cal, rms=0.856272Jy  sigma=28.689894
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7669 mas, bmaj=1.902 mas, bpa=-6.408 degrees
! Estimated noise=0.482098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100213 Jy
! Component: 100  -  total flux cleaned = 0.135237 Jy
! Total flux subtracted in 100 components = 0.135237 Jy
! Clean residual min=-0.007548 max=0.015785 Jy/beam
! Clean residual mean=-0.000014 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 0.135237 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.135237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056297Jy  sigma=1.654307
! Fit after  self-cal, rms=0.055860Jy  sigma=1.640978
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186441 Jy
! Component: 100  -  total flux cleaned = 0.0285006 Jy
! Total flux subtracted in 100 components = 0.0285006 Jy
! Clean residual min=-0.005417 max=0.010655 Jy/beam
! Clean residual mean=-0.000009 rms=0.001091 Jy/beam
! Combined flux in latest and established models = 0.163738 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.163738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046404Jy  sigma=1.258744
! Fit after  self-cal, rms=0.046210Jy  sigma=1.252835
! Inverting map 
! Added new window around map position (-1.8, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00950793 Jy
! Component: 100  -  total flux cleaned = 0.0153479 Jy
! Total flux subtracted in 100 components = 0.0153479 Jy
! Clean residual min=-0.004370 max=0.005696 Jy/beam
! Clean residual mean=-0.000006 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.179086 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.179086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043332Jy  sigma=1.122586
! Fit after  self-cal, rms=0.043220Jy  sigma=1.118457
! Inverting map 
! Added new window around map position (-5, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545115 Jy
! Component: 100  -  total flux cleaned = 0.0091846 Jy
! Total flux subtracted in 100 components = 0.0091846 Jy
! Clean residual min=-0.004439 max=0.004196 Jy/beam
! Clean residual mean=-0.000004 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.18827 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.18827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042272Jy  sigma=1.076377
! Fit after  self-cal, rms=0.042212Jy  sigma=1.074065
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=2.355 mas, bpa=-2.024 degrees
! Estimated noise=0.303371 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048925 Jy
! Component: 100  -  total flux cleaned = 0.00802136 Jy
! Component: 150  -  total flux cleaned = 0.0102149 Jy
! Component: 200  -  total flux cleaned = 0.0112716 Jy
! Total flux subtracted in 200 components = 0.0112716 Jy
! Clean residual min=-0.004198 max=0.004341 Jy/beam
! Clean residual mean=-0.000006 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.199542 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 49 components and 0.199542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041479Jy  sigma=1.047984
! Fit after  self-cal, rms=0.041425Jy  sigma=1.045819
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.015 x 2.355 at -2.024 degrees (North through East)
! Clean map  min=-0.0040955  max=0.14011 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.03     LA        1.03     
!   NL        1.28     OV        1.00     PT        1.00     SC        1.14     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.95     HN        0.91     KP        1.21     
!   LA        0.98     MK        1.03     NL        0.97     OV        1.00     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        1.11     LA        1.07     
!   NL        1.24     OV        1.04     PT        0.99     SC        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.96     HN        0.91     KP        1.27     
!   LA        0.98     MK        1.05     NL        0.97     OV        0.99     
!   PT        0.90     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.12     HN        1.06     LA        1.06     
!   NL        1.21     OV        0.99     PT        1.02     SC        1.14     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.97     HN        0.91     KP        1.24     
!   LA        0.99     MK        1.03     NL        0.97     OV        0.99     
!   PT        0.90     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.14     HN        1.08     LA        1.04     
!   NL        1.23     OV        1.03     PT        1.02     SC        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.98     HN        0.90     KP        1.21     
!   LA        1.01     MK        1.06     NL        0.97     OV        0.99     
!   PT        0.90     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        1.10     LA        1.04     
!   NL        1.23     OV        1.01     PT        1.03     SC        1.15     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.95     HN        0.91     KP        1.22     
!   LA        1.01     MK        1.00     NL        0.96     OV        1.01     
!   PT        0.92     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        1.11     LA        1.05     
!   NL        1.21     OV        1.01     PT        0.99     SC        1.13     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.98     HN        0.93     KP        1.25     
!   LA        1.00     MK        1.08     NL        0.95     OV        1.01     
!   PT        0.91     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.08     HN        1.12     LA        1.07     
!   NL        1.24     OV        0.99     PT        1.02     SC        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        1.00     HN        0.93     KP        1.21     
!   LA        1.01     MK        1.08     NL        0.97     OV        1.00     
!   PT        0.90     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.08     LA        1.02     
!   NL        1.24     OV        1.06     PT        0.98     SC        1.13     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.98     HN        0.91     KP        1.25     
!   LA        1.00     MK        1.04     NL        0.96     OV        1.00     
!   PT        0.91     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.041425Jy  sigma=1.045819
! Fit after  self-cal, rms=0.039531Jy  sigma=0.857493
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.36 mas, bpa=-1.97 degrees
! Estimated noise=0.303603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000789883 Jy
! Component: 100  -  total flux cleaned = 0.00105922 Jy
! Component: 150  -  total flux cleaned = 0.00114517 Jy
! Component: 200  -  total flux cleaned = 0.00125458 Jy
! Total flux subtracted in 200 components = 0.00125458 Jy
! Clean residual min=-0.001512 max=0.001440 Jy/beam
! Clean residual mean=-0.000004 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.200796 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 0.200796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039360Jy  sigma=0.852332
! Fit after  self-cal, rms=0.039357Jy  sigma=0.851912
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039357Jy  sigma=0.851912
! Fit after  self-cal, rms=0.039463Jy  sigma=0.850861
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=2.355 mas, bpa=-2.014 degrees
! Estimated noise=0.304316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000392155 Jy
! Component: 100  -  total flux cleaned = 0.000679354 Jy
! Component: 150  -  total flux cleaned = 0.00082899 Jy
! Component: 200  -  total flux cleaned = 0.000934232 Jy
! Total flux subtracted in 200 components = 0.000934232 Jy
! Clean residual min=-0.001496 max=0.001309 Jy/beam
! Clean residual mean=-0.000004 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.201731 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 87 components and 0.201731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039367Jy  sigma=0.849293
! Fit after  self-cal, rms=0.039362Jy  sigma=0.849188
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.20472e-05 Jy
! Component: 100  -  total flux cleaned = -8.52346e-05 Jy
! Component: 150  -  total flux cleaned = -8.4777e-05 Jy
! Component: 200  -  total flux cleaned = -8.45379e-05 Jy
! Total flux subtracted in 200 components = -8.45379e-05 Jy
! Clean residual min=-0.001483 max=0.001288 Jy/beam
! Clean residual mean=-0.000004 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.201646 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 95 components and 0.201646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039327Jy  sigma=0.848431
! Fit after  self-cal, rms=0.039326Jy  sigma=0.848396
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039326Jy  sigma=0.848396
! Fit after  self-cal, rms=0.039365Jy  sigma=0.843873
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=2.35 mas, bpa=-2.075 degrees
! Estimated noise=0.305023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000418908 Jy
! Component: 100  -  total flux cleaned = 0.000636538 Jy
! Component: 150  -  total flux cleaned = 0.000745653 Jy
! Component: 200  -  total flux cleaned = 0.000783964 Jy
! Total flux subtracted in 200 components = 0.000783964 Jy
! Clean residual min=-0.001318 max=0.001124 Jy/beam
! Clean residual mean=-0.000003 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.20243 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.20243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039295Jy  sigma=0.843456
! Fit after  self-cal, rms=0.039292Jy  sigma=0.843400
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163888 Jy
! Component: 100  -  total flux cleaned = -0.000162897 Jy
! Component: 150  -  total flux cleaned = -0.000129987 Jy
! Component: 200  -  total flux cleaned = -0.000130135 Jy
! Total flux subtracted in 200 components = -0.000130135 Jy
! Clean residual min=-0.001309 max=0.001143 Jy/beam
! Clean residual mean=-0.000003 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.2023 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 113 components and 0.2023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039268Jy  sigma=0.843111
! Fit after  self-cal, rms=0.039268Jy  sigma=0.843088
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039268Jy  sigma=0.843088
! Fit after  self-cal, rms=0.039478Jy  sigma=0.841897
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=3.97 mas, bpa=-3.041 degrees
! Estimated noise=0.368184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554064 Jy
! Component: 100  -  total flux cleaned = 0.000830037 Jy
! Component: 150  -  total flux cleaned = 0.000969915 Jy
! Component: 200  -  total flux cleaned = 0.00102555 Jy
! Total flux subtracted in 200 components = 0.00102555 Jy
! Clean residual min=-0.001746 max=0.001327 Jy/beam
! Clean residual mean=-0.000005 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.203325 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 130 components and 0.203325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039419Jy  sigma=0.842353
! Fit after  self-cal, rms=0.039418Jy  sigma=0.842304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.53504e-05 Jy
! Component: 100  -  total flux cleaned = 2.52507e-05 Jy
! Component: 150  -  total flux cleaned = 6.11638e-05 Jy
! Component: 200  -  total flux cleaned = 0.000114214 Jy
! Total flux subtracted in 200 components = 0.000114214 Jy
! Clean residual min=-0.001716 max=0.001339 Jy/beam
! Clean residual mean=-0.000004 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.20344 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 142 components and 0.20344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039404Jy  sigma=0.842636
! Fit after  self-cal, rms=0.039404Jy  sigma=0.842620
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.347 mas, bpa=-2.1 degrees
! Estimated noise=0.305979 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 2.347 at -2.1 degrees (North through East)
! Clean map  min=-0.0012956  max=0.14159 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7592 mas, bmaj=1.897 mas, bpa=-6.53 degrees
! Estimated noise=0.485149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10137 Jy
! Component: 100  -  total flux cleaned = 0.139015 Jy
! Component: 150  -  total flux cleaned = 0.157977 Jy
! Component: 200  -  total flux cleaned = 0.16925 Jy
! Total flux subtracted in 200 components = 0.16925 Jy
! Clean residual min=-0.002935 max=0.006163 Jy/beam
! Clean residual mean=-0.000010 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.16925 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.16925 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.347 mas, bpa=-2.1 degrees
! Estimated noise=0.305979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122854 Jy
! Component: 100  -  total flux cleaned = 0.0194283 Jy
! Component: 150  -  total flux cleaned = 0.024004 Jy
! Component: 200  -  total flux cleaned = 0.0270942 Jy
! Total flux subtracted in 200 components = 0.0270942 Jy
! Clean residual min=-0.001677 max=0.002145 Jy/beam
! Clean residual mean=-0.000008 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.196344 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 49 components and 0.196344 Jy
! Inverting map 
! Added new window around map position (-4.6, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234987 Jy
! Component: 100  -  total flux cleaned = 0.00406754 Jy
! Component: 150  -  total flux cleaned = 0.00537882 Jy
! Component: 200  -  total flux cleaned = 0.00639531 Jy
! Total flux subtracted in 200 components = 0.00639531 Jy
! Clean residual min=-0.001349 max=0.001171 Jy/beam
! Clean residual mean=-0.000004 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.202739 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 67 components and 0.202739 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=3.97 mas, bpa=-3.041 degrees
! Estimated noise=0.368184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107057 Jy
! Component: 100  -  total flux cleaned = 0.00113286 Jy
! Component: 150  -  total flux cleaned = 0.00118292 Jy
! Component: 200  -  total flux cleaned = 0.00120624 Jy
! Total flux subtracted in 200 components = 0.00120624 Jy
! Clean residual min=-0.001699 max=0.001426 Jy/beam
! Clean residual mean=-0.000005 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.203946 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.95826e-05 Jy
! Component: 100  -  total flux cleaned = 1.91661e-05 Jy
! Component: 150  -  total flux cleaned = 1.87341e-05 Jy
! Component: 200  -  total flux cleaned = 1.83977e-05 Jy
! Total flux subtracted in 200 components = 1.83977e-05 Jy
! Clean residual min=-0.001726 max=0.001430 Jy/beam
! Clean residual mean=-0.000004 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.203964 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 92 components and 0.203964 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.347 mas, bpa=-2.1 degrees
! Estimated noise=0.305979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208704 Jy
! Component: 100  -  total flux cleaned = -0.00023252 Jy
! Component: 150  -  total flux cleaned = -0.000210818 Jy
! Component: 200  -  total flux cleaned = -0.000229918 Jy
! Total flux subtracted in 200 components = -0.000229918 Jy
! Clean residual min=-0.001301 max=0.001191 Jy/beam
! Clean residual mean=-0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.203734 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 107 components and 0.203734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039382Jy  sigma=0.842231
! Fit after  self-cal, rms=0.039375Jy  sigma=0.841957
wmodel J1905-1153_X_map.mod
! Writing 107 model components to file: J1905-1153_X_map.mod
wobs   J1905-1153_X_uvs.fits
! Writing UV FITS file: J1905-1153_X_uvs.fits
wwins  J1905-1153_X_map.win
! wwins: Wrote 5 windows to J1905-1153_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000324015 Jy
! Component: 100  -  total flux cleaned = -0.000404761 Jy
! Component: 150  -  total flux cleaned = -0.000444029 Jy
! Component: 200  -  total flux cleaned = -0.000519248 Jy
! Component: 250  -  total flux cleaned = -0.000610362 Jy
! Component: 300  -  total flux cleaned = -0.000734529 Jy
! Component: 350  -  total flux cleaned = -0.000872936 Jy
! Component: 400  -  total flux cleaned = -0.000957791 Jy
! Component: 450  -  total flux cleaned = -0.00107413 Jy
! Component: 500  -  total flux cleaned = -0.00117193 Jy
! Component: 550  -  total flux cleaned = -0.00128368 Jy
! Component: 600  -  total flux cleaned = -0.0013306 Jy
! Component: 650  -  total flux cleaned = -0.00137717 Jy
! Component: 700  -  total flux cleaned = -0.00143843 Jy
! Component: 750  -  total flux cleaned = -0.00146839 Jy
! Component: 800  -  total flux cleaned = -0.00148326 Jy
! Component: 850  -  total flux cleaned = -0.00146856 Jy
! Component: 900  -  total flux cleaned = -0.00148305 Jy
! Component: 950  -  total flux cleaned = -0.00149721 Jy
! Component: 1000  -  total flux cleaned = -0.00148297 Jy
! Component: 1050  -  total flux cleaned = -0.00145458 Jy
! Component: 1100  -  total flux cleaned = -0.00144039 Jy
! Component: 1150  -  total flux cleaned = -0.00144031 Jy
! Component: 1200  -  total flux cleaned = -0.0013994 Jy
! Component: 1250  -  total flux cleaned = -0.00141298 Jy
! Component: 1300  -  total flux cleaned = -0.00141305 Jy
! Component: 1350  -  total flux cleaned = -0.00142618 Jy
! Component: 1400  -  total flux cleaned = -0.00136001 Jy
! Component: 1450  -  total flux cleaned = -0.00136015 Jy
! Component: 1500  -  total flux cleaned = -0.0013602 Jy
! Component: 1550  -  total flux cleaned = -0.00134735 Jy
! Component: 1600  -  total flux cleaned = -0.00134732 Jy
! Component: 1650  -  total flux cleaned = -0.00136004 Jy
! Component: 1700  -  total flux cleaned = -0.00134751 Jy
! Component: 1750  -  total flux cleaned = -0.00134742 Jy
! Component: 1800  -  total flux cleaned = -0.0013349 Jy
! Component: 1850  -  total flux cleaned = -0.00129789 Jy
! Component: 1900  -  total flux cleaned = -0.00128558 Jy
! Component: 1950  -  total flux cleaned = -0.00126131 Jy
! Component: 2000  -  total flux cleaned = -0.00126138 Jy
! Component: 2050  -  total flux cleaned = -0.00126131 Jy
! Component: 2100  -  total flux cleaned = -0.00124935 Jy
! Component: 2150  -  total flux cleaned = -0.00116615 Jy
! Component: 2200  -  total flux cleaned = -0.00117791 Jy
! Component: 2250  -  total flux cleaned = -0.00118961 Jy
! Component: 2300  -  total flux cleaned = -0.00117783 Jy
! Component: 2350  -  total flux cleaned = -0.00121253 Jy
! Component: 2400  -  total flux cleaned = -0.00118938 Jy
! Component: 2450  -  total flux cleaned = -0.00116629 Jy
! Component: 2500  -  total flux cleaned = -0.00113212 Jy
! Component: 2550  -  total flux cleaned = -0.00116611 Jy
! Component: 2600  -  total flux cleaned = -0.00112093 Jy
! Component: 2650  -  total flux cleaned = -0.00112102 Jy
! Component: 2700  -  total flux cleaned = -0.00112103 Jy
! Component: 2750  -  total flux cleaned = -0.00110993 Jy
! Component: 2800  -  total flux cleaned = -0.0011099 Jy
! Component: 2850  -  total flux cleaned = -0.00110987 Jy
! Component: 2900  -  total flux cleaned = -0.00112076 Jy
! Component: 2950  -  total flux cleaned = -0.00106647 Jy
! Component: 3000  -  total flux cleaned = -0.00105576 Jy
! Component: 3050  -  total flux cleaned = -0.00101288 Jy
! Component: 3100  -  total flux cleaned = -0.0010449 Jy
! Component: 3150  -  total flux cleaned = -0.00104492 Jy
! Component: 3200  -  total flux cleaned = -0.00103432 Jy
! Component: 3250  -  total flux cleaned = -0.000981727 Jy
! Component: 3300  -  total flux cleaned = -0.000981659 Jy
! Component: 3350  -  total flux cleaned = -0.00100259 Jy
! Component: 3400  -  total flux cleaned = -0.00101294 Jy
! Component: 3450  -  total flux cleaned = -0.00100261 Jy
! Component: 3500  -  total flux cleaned = -0.00098197 Jy
! Component: 3550  -  total flux cleaned = -0.00094118 Jy
! Component: 3600  -  total flux cleaned = -0.000941143 Jy
! Component: 3650  -  total flux cleaned = -0.00100186 Jy
! Component: 3700  -  total flux cleaned = -0.000951501 Jy
! Component: 3750  -  total flux cleaned = -0.00097148 Jy
! Component: 3800  -  total flux cleaned = -0.000981481 Jy
! Component: 3850  -  total flux cleaned = -0.000991348 Jy
! Component: 3900  -  total flux cleaned = -0.000951933 Jy
! Component: 3950  -  total flux cleaned = -0.000991236 Jy
! Component: 4000  -  total flux cleaned = -0.000991242 Jy
! Component: 4050  -  total flux cleaned = -0.000971789 Jy
! Total flux subtracted in 4096 components = -0.00100089 Jy
! Clean residual min=-0.000544 max=0.000622 Jy/beam
! Clean residual mean=-0.000002 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.202733 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 412 components and 0.202733 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/sb072/temp_maps//J1905-1153_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 2.347 at -2.1 degrees (North through East)
! Clean map  min=-0.00094014  max=0.14214 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1905-1153_X_map.fits
wmodel /vlbi/sb072/temp_maps//J1905-1153_X_map.mod
! Writing 412 model components to file: /vlbi/sb072/temp_maps//J1905-1153_X_map.mod
wobs   /vlbi/sb072/temp_maps//J1905-1153_X_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J1905-1153_X_uvs.fits
wwins  /vlbi/sb072/temp_maps//J1905-1153_X_map.win
! wwins: Wrote 6 windows to /vlbi/sb072/temp_maps//J1905-1153_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.142135 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000177623 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.374903 0.374903 0.749807 1.49961 2.99923 5.99845 11.9969 23.9938 47.9876 95.9753
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.142 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  800.206 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J1905-1153_X_dfm.log closed on Tue Mar  5 23:30:14 2019