! Started logfile: /vlbi/sb072/temp_maps//J1754+3446_X_dfm.log on Sat Dec 15 22:30:47 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J1754+3446_X_uva.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J1754+3446_X_uva.fits ! AN table 1: 23 integrations on 10 of 10 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1754+3446 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 1840 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1754+3446_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.999290Jy sigma=45.389816 ! Fit after self-cal, rms=0.993128Jy sigma=45.105766 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=11.07 mas, bpa=58.03 degrees ! Estimated noise=0.64598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552968 Jy ! Component: 100 - total flux cleaned = 0.00616598 Jy ! Total flux subtracted in 100 components = 0.00616598 Jy ! Clean residual min=-0.000833 max=0.000837 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.00616598 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.00616598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.013120Jy sigma=0.590050 ! Fit after self-cal, rms=0.011870Jy sigma=0.532578 ! Inverting map ! Added new window around map position (0.6, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244334 Jy ! Component: 100 - total flux cleaned = 0.00255532 Jy ! Total flux subtracted in 100 components = 0.00255532 Jy ! Clean residual min=-0.001190 max=0.000876 Jy/beam ! Clean residual mean=0.000001 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0087213 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.0087213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011440Jy sigma=0.510860 ! Fit after self-cal, rms=0.011427Jy sigma=0.510427 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=9.687 mas, bpa=54.49 degrees ! Estimated noise=0.365783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435446 Jy ! Component: 100 - total flux cleaned = -0.000528463 Jy ! Component: 150 - total flux cleaned = -0.000433587 Jy ! Component: 200 - total flux cleaned = -0.000376973 Jy ! Total flux subtracted in 200 components = -0.000376973 Jy ! Clean residual min=-0.000710 max=0.000492 Jy/beam ! Clean residual mean=0.000002 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.00834433 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 65 components and 0.00834433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011380Jy sigma=0.507924 ! Fit after self-cal, rms=0.011367Jy sigma=0.507179 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.092 x 9.687 at 54.49 degrees (North through East) ! Clean map min=-0.00083774 max=0.0087896 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 KP 0.90 LA 1.01 OV 1.00 ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.11 KP 1.10 LA 1.09 OV 0.84 ! PT 1.30 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 KP 1.02 LA 0.99 OV 0.92 ! PT 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 1.01 LA 0.88 OV 0.93 ! PT 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 0.88 LA 0.87 OV 1.29 ! PT 0.93 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 1.00 LA 0.83 OV 0.95 ! PT 1.15 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 KP 1.00 LA 0.87 OV 0.92 ! PT 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 KP 1.10 LA 0.99 OV 0.98 ! PT 0.99 ! ! ! Fit before self-cal, rms=0.011367Jy sigma=0.507179 ! Fit after self-cal, rms=0.011395Jy sigma=0.504066 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=9.542 mas, bpa=54.24 degrees ! Estimated noise=0.358945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337248 Jy ! Component: 100 - total flux cleaned = 0.000456741 Jy ! Component: 150 - total flux cleaned = 0.000517229 Jy ! Component: 200 - total flux cleaned = 0.000578892 Jy ! Total flux subtracted in 200 components = 0.000578892 Jy ! Clean residual min=-0.000425 max=0.000313 Jy/beam ! Clean residual mean=0.000002 rms=0.000104 Jy/beam ! Combined flux in latest and established models = 0.00892322 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 101 components and 0.00892322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011373Jy sigma=0.503075 ! Fit after self-cal, rms=0.011428Jy sigma=0.502122 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011428Jy sigma=0.502122 ! Fit after self-cal, rms=0.011656Jy sigma=0.501826 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.082 mas, bmaj=9.487 mas, bpa=54.14 degrees ! Estimated noise=0.358511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233457 Jy ! Component: 100 - total flux cleaned = 0.000331784 Jy ! Component: 150 - total flux cleaned = 0.000409334 Jy ! Component: 200 - total flux cleaned = 0.000457172 Jy ! Total flux subtracted in 200 components = 0.000457172 Jy ! Clean residual min=-0.000334 max=0.000264 Jy/beam ! Clean residual mean=0.000001 rms=0.000086 Jy/beam ! Combined flux in latest and established models = 0.00938039 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 129 components and 0.00938039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011645Jy sigma=0.501309 ! Fit after self-cal, rms=0.011675Jy sigma=0.501094 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.5053e-05 Jy ! Component: 100 - total flux cleaned = 6.31847e-05 Jy ! Component: 150 - total flux cleaned = 0.000101464 Jy ! Component: 200 - total flux cleaned = 0.000139036 Jy ! Total flux subtracted in 200 components = 0.000139036 Jy ! Clean residual min=-0.000319 max=0.000255 Jy/beam ! Clean residual mean=0.000002 rms=0.000079 Jy/beam ! Combined flux in latest and established models = 0.00951943 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 148 components and 0.00951943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011669Jy sigma=0.500792 ! Fit after self-cal, rms=0.011671Jy sigma=0.500503 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011671Jy sigma=0.500503 ! Fit after self-cal, rms=0.011785Jy sigma=0.500403 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.081 mas, bmaj=9.449 mas, bpa=54.1 degrees ! Estimated noise=0.35781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170354 Jy ! Component: 100 - total flux cleaned = 0.000265603 Jy ! Component: 150 - total flux cleaned = 0.000326048 Jy ! Component: 200 - total flux cleaned = 0.000361173 Jy ! Total flux subtracted in 200 components = 0.000361173 Jy ! Clean residual min=-0.000289 max=0.000289 Jy/beam ! Clean residual mean=0.000001 rms=0.000081 Jy/beam ! Combined flux in latest and established models = 0.00988061 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 175 components and 0.0098806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011776Jy sigma=0.500004 ! Fit after self-cal, rms=0.011761Jy sigma=0.498952 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.05501e-05 Jy ! Component: 100 - total flux cleaned = 8.26813e-05 Jy ! Component: 150 - total flux cleaned = 0.000110277 Jy ! Component: 200 - total flux cleaned = 0.000104425 Jy ! Total flux subtracted in 200 components = 0.000104425 Jy ! Clean residual min=-0.000277 max=0.000309 Jy/beam ! Clean residual mean=0.000001 rms=0.000093 Jy/beam ! Combined flux in latest and established models = 0.00998503 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 187 components and 0.00998503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011750Jy sigma=0.498431 ! Fit after self-cal, rms=0.011738Jy sigma=0.498073 ! Inverting map ! Added new window around map position (-48.8, 34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116195 Jy ! Component: 100 - total flux cleaned = 5.48313e-05 Jy ! Component: 150 - total flux cleaned = -3.68021e-06 Jy ! Component: 200 - total flux cleaned = -5.00529e-05 Jy ! Total flux subtracted in 200 components = -5.00529e-05 Jy ! Clean residual min=-0.000188 max=0.000231 Jy/beam ! Clean residual mean=0.000001 rms=0.000060 Jy/beam ! Combined flux in latest and established models = 0.00993497 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 229 components and 0.00993497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011723Jy sigma=0.497410 ! Fit after self-cal, rms=0.011719Jy sigma=0.497119 ! Inverting map ! Added new window around map position (41, 37.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.5814e-05 Jy ! Component: 100 - total flux cleaned = 9.58508e-07 Jy ! Component: 150 - total flux cleaned = 6.3959e-06 Jy ! Component: 200 - total flux cleaned = 4.84734e-05 Jy ! Total flux subtracted in 200 components = 4.84734e-05 Jy ! Clean residual min=-0.000179 max=0.000170 Jy/beam ! Clean residual mean=0.000000 rms=0.000049 Jy/beam ! Combined flux in latest and established models = 0.00998345 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 275 components and 0.00998344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011705Jy sigma=0.496536 ! Fit after self-cal, rms=0.011695Jy sigma=0.496153 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011695Jy sigma=0.496153 ! Fit after self-cal, rms=0.011681Jy sigma=0.496050 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.26 mas, bmaj=9.32 mas, bpa=53.93 degrees ! Estimated noise=0.357589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51679e-05 Jy ! Component: 100 - total flux cleaned = -2.15451e-05 Jy ! Component: 150 - total flux cleaned = 7.03763e-05 Jy ! Component: 200 - total flux cleaned = 0.000127931 Jy ! Total flux subtracted in 200 components = 0.000127931 Jy ! Clean residual min=-0.000137 max=0.000156 Jy/beam ! Clean residual mean=0.000001 rms=0.000047 Jy/beam ! Combined flux in latest and established models = 0.0101114 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 311 components and 0.0101114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011672Jy sigma=0.495692 ! Fit after self-cal, rms=0.011668Jy sigma=0.495504 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.70998e-05 Jy ! Component: 100 - total flux cleaned = -3.38616e-05 Jy ! Component: 150 - total flux cleaned = 2.92739e-05 Jy ! Component: 200 - total flux cleaned = 7.31525e-05 Jy ! Total flux subtracted in 200 components = 7.31525e-05 Jy ! Clean residual min=-0.000137 max=0.000160 Jy/beam ! Clean residual mean=0.000000 rms=0.000045 Jy/beam ! Combined flux in latest and established models = 0.0101845 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 349 components and 0.0101845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011662Jy sigma=0.495250 ! Fit after self-cal, rms=0.011660Jy sigma=0.495099 ! Inverting map ! Added new window around map position (37, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.00739e-05 Jy ! Component: 100 - total flux cleaned = 0.000126881 Jy ! Component: 150 - total flux cleaned = 0.000174294 Jy ! Component: 200 - total flux cleaned = 0.000174971 Jy ! Total flux subtracted in 200 components = 0.000174971 Jy ! Clean residual min=-0.000138 max=0.000133 Jy/beam ! Clean residual mean=0.000000 rms=0.000039 Jy/beam ! Combined flux in latest and established models = 0.0103595 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 421 components and 0.0103595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011651Jy sigma=0.494811 ! Fit after self-cal, rms=0.011645Jy sigma=0.494708 ! Inverting map ! Added new window around map position (-47.2, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110565 Jy ! Component: 100 - total flux cleaned = 9.82727e-05 Jy ! Component: 150 - total flux cleaned = 8.09125e-05 Jy ! Component: 200 - total flux cleaned = 7.55837e-05 Jy ! Total flux subtracted in 200 components = 7.55837e-05 Jy ! Clean residual min=-0.000107 max=0.000104 Jy/beam ! Clean residual mean=0.000001 rms=0.000038 Jy/beam ! Combined flux in latest and established models = 0.0104351 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 482 components and 0.0104351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011638Jy sigma=0.494454 ! Fit after self-cal, rms=0.011631Jy sigma=0.494143 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113148 Jy ! Component: 100 - total flux cleaned = 0.000168565 Jy ! Component: 150 - total flux cleaned = 0.000187442 Jy ! Component: 200 - total flux cleaned = 0.000178954 Jy ! Total flux subtracted in 200 components = 0.000178954 Jy ! Clean residual min=-0.000092 max=0.000100 Jy/beam ! Clean residual mean=0.000000 rms=0.000030 Jy/beam ! Combined flux in latest and established models = 0.010614 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 542 components and 0.010614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011625Jy sigma=0.493947 ! Fit after self-cal, rms=0.011622Jy sigma=0.493900 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.72074e-05 Jy ! Component: 100 - total flux cleaned = 0.000122111 Jy ! Component: 150 - total flux cleaned = 0.000118251 Jy ! Component: 200 - total flux cleaned = 0.000103198 Jy ! Total flux subtracted in 200 components = 0.000103198 Jy ! Clean residual min=-0.000091 max=0.000097 Jy/beam ! Clean residual mean=0.000000 rms=0.000028 Jy/beam ! Combined flux in latest and established models = 0.0107172 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 574 components and 0.0107172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011618Jy sigma=0.493769 ! Fit after self-cal, rms=0.011615Jy sigma=0.493739 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.58669e-05 Jy ! Component: 100 - total flux cleaned = 9.80043e-05 Jy ! Component: 150 - total flux cleaned = 8.70945e-05 Jy ! Component: 200 - total flux cleaned = 7.6714e-05 Jy ! Total flux subtracted in 200 components = 7.6714e-05 Jy ! Clean residual min=-0.000091 max=0.000095 Jy/beam ! Clean residual mean=0.000000 rms=0.000026 Jy/beam ! Combined flux in latest and established models = 0.0107939 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 605 components and 0.0107939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011612Jy sigma=0.493639 ! Fit after self-cal, rms=0.011610Jy sigma=0.493538 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.48585e-05 Jy ! Component: 100 - total flux cleaned = 0.000129951 Jy ! Component: 150 - total flux cleaned = 0.000154558 Jy ! Component: 200 - total flux cleaned = 0.000161345 Jy ! Total flux subtracted in 200 components = 0.000161345 Jy ! Clean residual min=-0.000082 max=0.000103 Jy/beam ! Clean residual mean=0.000000 rms=0.000025 Jy/beam ! Combined flux in latest and established models = 0.0109553 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 647 components and 0.0109553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011607Jy sigma=0.493431 ! Fit after self-cal, rms=0.011604Jy sigma=0.493201 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.24939e-05 Jy ! Component: 100 - total flux cleaned = 2.91218e-05 Jy ! Component: 150 - total flux cleaned = 2.2565e-05 Jy ! Component: 200 - total flux cleaned = 7.76729e-06 Jy ! Total flux subtracted in 200 components = 7.76729e-06 Jy ! Clean residual min=-0.000081 max=0.000100 Jy/beam ! Clean residual mean=0.000000 rms=0.000022 Jy/beam ! Combined flux in latest and established models = 0.0109631 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 686 components and 0.0109631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011601Jy sigma=0.493108 ! Fit after self-cal, rms=0.011594Jy sigma=0.493009 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54968e-05 Jy ! Component: 100 - total flux cleaned = 7.18124e-06 Jy ! Component: 150 - total flux cleaned = -1.28008e-05 Jy ! Component: 200 - total flux cleaned = -3.15455e-05 Jy ! Total flux subtracted in 200 components = -3.15455e-05 Jy ! Clean residual min=-0.000099 max=0.000101 Jy/beam ! Clean residual mean=0.000000 rms=0.000023 Jy/beam ! Combined flux in latest and established models = 0.0109315 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 720 components and 0.0109315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011591Jy sigma=0.492929 ! Fit after self-cal, rms=0.011587Jy sigma=0.492876 ! Inverting map ! Added new window around map position (-49.6, -51.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.24189e-05 Jy ! Component: 100 - total flux cleaned = 8.79952e-05 Jy ! Component: 150 - total flux cleaned = 0.000114813 Jy ! Component: 200 - total flux cleaned = 0.000146594 Jy ! Total flux subtracted in 200 components = 0.000146594 Jy ! Clean residual min=-0.000090 max=0.000105 Jy/beam ! Clean residual mean=0.000000 rms=0.000025 Jy/beam ! Combined flux in latest and established models = 0.0110781 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 758 components and 0.0110781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011584Jy sigma=0.492809 ! Fit after self-cal, rms=0.011577Jy sigma=0.492789 ! Inverting map ! Added new window around map position (-31, -47.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.22782e-05 Jy ! Component: 100 - total flux cleaned = 5.82963e-05 Jy ! Component: 150 - total flux cleaned = 7.26753e-05 Jy ! Component: 200 - total flux cleaned = 0.000102548 Jy ! Total flux subtracted in 200 components = 0.000102548 Jy ! Clean residual min=-0.000121 max=0.000079 Jy/beam ! Clean residual mean=-0.000000 rms=0.000024 Jy/beam ! Combined flux in latest and established models = 0.0111807 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 802 components and 0.0111807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011574Jy sigma=0.492699 ! Fit after self-cal, rms=0.011566Jy sigma=0.492668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=9.441 mas, bpa=54.1 degrees ! Estimated noise=0.356532 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.083 x 9.441 at 54.1 degrees (North through East) ! Clean map min=-0.00095438 max=0.0086718 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=10.85 mas, bpa=57.76 degrees ! Estimated noise=0.628694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383347 Jy ! Component: 100 - total flux cleaned = 0.0034739 Jy ! Component: 150 - total flux cleaned = 0.00291749 Jy ! Component: 200 - total flux cleaned = 0.00246931 Jy ! Total flux subtracted in 200 components = 0.00246931 Jy ! Clean residual min=-0.001100 max=0.000896 Jy/beam ! Clean residual mean=-0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.00246931 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.00246931 Jy ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=9.441 mas, bpa=54.1 degrees ! Estimated noise=0.356532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557591 Jy ! Component: 100 - total flux cleaned = 0.000525953 Jy ! Component: 150 - total flux cleaned = 0.000204346 Jy ! Component: 200 - total flux cleaned = -5.37888e-05 Jy ! Total flux subtracted in 200 components = -5.37888e-05 Jy ! Clean residual min=-0.000439 max=0.000495 Jy/beam ! Clean residual mean=-0.000002 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.00241552 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 89 components and 0.00241552 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.26 mas, bmaj=9.32 mas, bpa=53.93 degrees ! Estimated noise=0.357589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.26212e-06 Jy ! Component: 100 - total flux cleaned = -3.57456e-05 Jy ! Component: 150 - total flux cleaned = 1.27056e-05 Jy ! Component: 200 - total flux cleaned = 2.9116e-05 Jy ! Total flux subtracted in 200 components = 2.9116e-05 Jy ! Clean residual min=-0.000205 max=0.000172 Jy/beam ! Clean residual mean=-0.000001 rms=0.000060 Jy/beam ! Combined flux in latest and established models = 0.00244464 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.52502e-05 Jy ! Component: 100 - total flux cleaned = -5.95816e-05 Jy ! Component: 150 - total flux cleaned = -0.000101948 Jy ! Component: 200 - total flux cleaned = -0.000136578 Jy ! Total flux subtracted in 200 components = -0.000136578 Jy ! Clean residual min=-0.000166 max=0.000139 Jy/beam ! Clean residual mean=-0.000002 rms=0.000049 Jy/beam ! Combined flux in latest and established models = 0.00230806 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 166 components and 0.00230806 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=9.441 mas, bpa=54.1 degrees ! Estimated noise=0.356532 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.05215e-05 Jy ! Component: 100 - total flux cleaned = 0.000105734 Jy ! Component: 150 - total flux cleaned = 0.000132031 Jy ! Component: 200 - total flux cleaned = 0.000146904 Jy ! Total flux subtracted in 200 components = 0.000146904 Jy ! Clean residual min=-0.000123 max=0.000115 Jy/beam ! Clean residual mean=-0.000001 rms=0.000036 Jy/beam ! Combined flux in latest and established models = 0.00245496 Jy selfcal ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 225 components and 0.00245496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.011574Jy sigma=0.493091 ! Fit after self-cal, rms=0.011566Jy sigma=0.492926 wmodel J1754+3446_X_map.mod ! Writing 225 model components to file: J1754+3446_X_map.mod wobs J1754+3446_X_uvs.fits ! Writing UV FITS file: J1754+3446_X_uvs.fits wwins J1754+3446_X_map.win ! wwins: Wrote 7 windows to J1754+3446_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.8157e-05 Jy ! Component: 100 - total flux cleaned = 5.84364e-05 Jy ! Component: 150 - total flux cleaned = 6.86848e-05 Jy ! Component: 200 - total flux cleaned = 7.52053e-05 Jy ! Component: 250 - total flux cleaned = 8.30493e-05 Jy ! Component: 300 - total flux cleaned = 8.60795e-05 Jy ! Component: 350 - total flux cleaned = 9.65463e-05 Jy ! Component: 400 - total flux cleaned = 0.00010391 Jy ! Component: 450 - total flux cleaned = 0.000112643 Jy ! Component: 500 - total flux cleaned = 0.000124152 Jy ! Component: 550 - total flux cleaned = 0.000134153 Jy ! Component: 600 - total flux cleaned = 0.000146918 Jy ! Component: 650 - total flux cleaned = 0.000159585 Jy ! Component: 700 - total flux cleaned = 0.000170798 Jy ! Component: 750 - total flux cleaned = 0.000184745 Jy ! Component: 800 - total flux cleaned = 0.000197239 Jy ! Component: 850 - total flux cleaned = 0.000208325 Jy ! Component: 900 - total flux cleaned = 0.000215292 Jy ! Component: 950 - total flux cleaned = 0.000223661 Jy ! Component: 1000 - total flux cleaned = 0.000232068 Jy ! Component: 1050 - total flux cleaned = 0.000240526 Jy ! Component: 1100 - total flux cleaned = 0.000243361 Jy ! Component: 1150 - total flux cleaned = 0.000247642 Jy ! Component: 1200 - total flux cleaned = 0.000254856 Jy ! Component: 1250 - total flux cleaned = 0.000260692 Jy ! Component: 1300 - total flux cleaned = 0.000265122 Jy ! Component: 1350 - total flux cleaned = 0.000269584 Jy ! Component: 1400 - total flux cleaned = 0.000275616 Jy ! Component: 1450 - total flux cleaned = 0.000281713 Jy ! Component: 1500 - total flux cleaned = 0.000286364 Jy ! Component: 1550 - total flux cleaned = 0.000292622 Jy ! Component: 1600 - total flux cleaned = 0.000297386 Jy ! Component: 1650 - total flux cleaned = 0.000300608 Jy ! Component: 1700 - total flux cleaned = 0.00030226 Jy ! Component: 1750 - total flux cleaned = 0.0003056 Jy ! Component: 1800 - total flux cleaned = 0.000307303 Jy ! Component: 1850 - total flux cleaned = 0.00030209 Jy ! Component: 1900 - total flux cleaned = 0.000296765 Jy ! Component: 1950 - total flux cleaned = 0.000293126 Jy ! Component: 2000 - total flux cleaned = 0.00028942 Jy ! Component: 2050 - total flux cleaned = 0.000281808 Jy ! Component: 2100 - total flux cleaned = 0.000277874 Jy ! Component: 2150 - total flux cleaned = 0.000275867 Jy ! Component: 2200 - total flux cleaned = 0.000269775 Jy ! Component: 2250 - total flux cleaned = 0.0002656 Jy ! Component: 2300 - total flux cleaned = 0.000261311 Jy ! Component: 2350 - total flux cleaned = 0.000259129 Jy ! Component: 2400 - total flux cleaned = 0.000252351 Jy ! Component: 2450 - total flux cleaned = 0.000247692 Jy ! Component: 2500 - total flux cleaned = 0.000242901 Jy ! Component: 2550 - total flux cleaned = 0.000240437 Jy ! Component: 2600 - total flux cleaned = 0.000232905 Jy ! Component: 2650 - total flux cleaned = 0.000227692 Jy ! Component: 2700 - total flux cleaned = 0.000222362 Jy ! Component: 2750 - total flux cleaned = 0.000216883 Jy ! Component: 2800 - total flux cleaned = 0.0002113 Jy ! Component: 2850 - total flux cleaned = 0.000205539 Jy ! Component: 2900 - total flux cleaned = 0.000199619 Jy ! Component: 2950 - total flux cleaned = 0.000193631 Jy ! Component: 3000 - total flux cleaned = 0.000187425 Jy ! Component: 3050 - total flux cleaned = 0.000180976 Jy ! Component: 3100 - total flux cleaned = 0.00017437 Jy ! Component: 3150 - total flux cleaned = 0.000167611 Jy ! Component: 3200 - total flux cleaned = 0.000160616 Jy ! Component: 3250 - total flux cleaned = 0.000153452 Jy ! Component: 3300 - total flux cleaned = 0.000146125 Jy ! Component: 3350 - total flux cleaned = 0.000138585 Jy ! Component: 3400 - total flux cleaned = 0.000130838 Jy ! Component: 3450 - total flux cleaned = 0.000122907 Jy ! Component: 3500 - total flux cleaned = 0.000114721 Jy ! Component: 3550 - total flux cleaned = 0.000106252 Jy ! Component: 3600 - total flux cleaned = 9.32419e-05 Jy ! Component: 3650 - total flux cleaned = 8.87553e-05 Jy ! Component: 3700 - total flux cleaned = 7.96514e-05 Jy ! Component: 3750 - total flux cleaned = 7.01928e-05 Jy ! Component: 3800 - total flux cleaned = 5.56312e-05 Jy ! Component: 3850 - total flux cleaned = 4.55401e-05 Jy ! Component: 3900 - total flux cleaned = 3.52409e-05 Jy ! Component: 3950 - total flux cleaned = 1.9219e-05 Jy ! Component: 4000 - total flux cleaned = 1.36683e-05 Jy ! Component: 4050 - total flux cleaned = 2.44704e-06 Jy ! Total flux subtracted in 4096 components = -1.49274e-05 Jy ! Clean residual min=-0.000313 max=0.000294 Jy/beam ! Clean residual mean=-0.000001 rms=0.000106 Jy/beam ! Combined flux in latest and established models = 0.00244004 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 429 components and 0.00244004 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J1754+3446_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.083 x 9.441 at 54.1 degrees (North through East) ! Clean map min=-0.0019248 max=0.0072544 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1754+3446_X_map.fits wmodel /vlbi/sb072/temp_maps//J1754+3446_X_map.mod ! Writing 429 model components to file: /vlbi/sb072/temp_maps//J1754+3446_X_map.mod wobs /vlbi/sb072/temp_maps//J1754+3446_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J1754+3446_X_uvs.fits wwins /vlbi/sb072/temp_maps//J1754+3446_X_map.win ! wwins: Wrote 8 windows to /vlbi/sb072/temp_maps//J1754+3446_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.00725445 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000109103 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.51182 4.51182 9.02364 18.0473 36.0945 72.1891 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.007 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 66.492 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J1754+3446_X_dfm.log closed on Sat Dec 15 22:30:52 2018