! Started logfile: /vlbi/sb072/temp_maps//J1714-2053_X_dfm.log on Thu Jan 31 09:42:56 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/sb072/temp_maps//J1714-2053_X_uva.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J1714-2053_X_uva.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.930556 visibilities/baseline/integration-bin.
! Found source: J1714-2053
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 1608 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1714-2053_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008537Jy  sigma=36.234709
! Fit after  self-cal, rms=0.940703Jy  sigma=34.011046
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6428 mas, bmaj=2.034 mas, bpa=-8.056 degrees
! Estimated noise=0.745008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0407199 Jy
! Component: 100  -  total flux cleaned = 0.052269 Jy
! Total flux subtracted in 100 components = 0.052269 Jy
! Clean residual min=-0.005052 max=0.006041 Jy/beam
! Clean residual mean=-0.000002 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.052269 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.052269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070065Jy  sigma=1.163884
! Fit after  self-cal, rms=0.069258Jy  sigma=1.138210
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8607 mas, bmaj=2.436 mas, bpa=-5.193 degrees
! Estimated noise=0.519867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00860477 Jy
! Component: 100  -  total flux cleaned = 0.0123281 Jy
! Component: 150  -  total flux cleaned = 0.0140801 Jy
! Component: 200  -  total flux cleaned = 0.0149151 Jy
! Total flux subtracted in 200 components = 0.0149151 Jy
! Clean residual min=-0.002647 max=0.003107 Jy/beam
! Clean residual mean=0.000000 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.0671841 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.0671841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067469Jy  sigma=1.076815
! Fit after  self-cal, rms=0.067472Jy  sigma=1.076386
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8607 x 2.436 at -5.193 degrees (North through East)
! Clean map  min=-0.0024996  max=0.057216 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        0.85     KP        0.90     LA        1.10     
!   MK        0.92     NL        1.02     OV        1.07     PT        0.96     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.01     KP        0.97     LA        1.05     
!   MK        0.95     NL        1.15     OV        1.07     PT        0.91     
!   SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.90     KP        0.98     LA        1.01     
!   MK        0.99     NL        1.14     OV        1.01     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.95     KP        0.94     LA        1.06     
!   MK        0.90     NL        1.26     OV        1.02     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.95     KP        0.93     LA        1.01     
!   MK        0.99     NL        1.25     OV        1.11     PT        0.97     
!   SC        1.13     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.28     KP        0.93     LA        1.00     
!   MK        1.00     NL        1.13     OV        1.09     PT        0.96     
!   SC        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        0.93     KP        1.06     LA        1.02     
!   MK        0.98     NL        1.38     OV        0.98     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.95     KP        1.05     LA        1.06     
!   MK        0.90     NL        1.04     OV        1.11     PT        0.93     
!   SC        1.09     
! 
! 
! Fit before self-cal, rms=0.067472Jy  sigma=1.076386
! Fit after  self-cal, rms=0.078152Jy  sigma=1.048525
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8504 mas, bmaj=2.437 mas, bpa=-5.55 degrees
! Estimated noise=0.524827 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149695 Jy
! Component: 100  -  total flux cleaned = 0.0019798 Jy
! Component: 150  -  total flux cleaned = 0.00206371 Jy
! Component: 200  -  total flux cleaned = 0.00215312 Jy
! Total flux subtracted in 200 components = 0.00215312 Jy
! Clean residual min=-0.002652 max=0.002202 Jy/beam
! Clean residual mean=0.000000 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.0693372 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.0693372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077997Jy  sigma=1.048567
! Fit after  self-cal, rms=0.078088Jy  sigma=1.047688
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.078088Jy  sigma=1.047688
! Fit after  self-cal, rms=0.080159Jy  sigma=1.046207
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8409 mas, bmaj=2.425 mas, bpa=-5.907 degrees
! Estimated noise=0.531254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134556 Jy
! Component: 100  -  total flux cleaned = 0.00188196 Jy
! Component: 150  -  total flux cleaned = 0.00195454 Jy
! Component: 200  -  total flux cleaned = 0.00201507 Jy
! Total flux subtracted in 200 components = 0.00201507 Jy
! Clean residual min=-0.002623 max=0.002200 Jy/beam
! Clean residual mean=-0.000000 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0713522 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.0713523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080019Jy  sigma=1.046739
! Fit after  self-cal, rms=0.080020Jy  sigma=1.046711
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.59325e-05 Jy
! Component: 100  -  total flux cleaned = 5.65119e-05 Jy
! Component: 150  -  total flux cleaned = 6.56496e-05 Jy
! Component: 200  -  total flux cleaned = 7.45144e-05 Jy
! Total flux subtracted in 200 components = 7.45144e-05 Jy
! Clean residual min=-0.002600 max=0.002212 Jy/beam
! Clean residual mean=-0.000000 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0714268 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 32 components and 0.0714268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080014Jy  sigma=1.046610
! Fit after  self-cal, rms=0.080014Jy  sigma=1.046591
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080014Jy  sigma=1.046591
! Fit after  self-cal, rms=0.081409Jy  sigma=1.045186
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8325 mas, bmaj=2.417 mas, bpa=-6.314 degrees
! Estimated noise=0.537934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123876 Jy
! Component: 100  -  total flux cleaned = 0.00176103 Jy
! Component: 150  -  total flux cleaned = 0.00200778 Jy
! Component: 200  -  total flux cleaned = 0.00202399 Jy
! Total flux subtracted in 200 components = 0.00202399 Jy
! Clean residual min=-0.002591 max=0.002227 Jy/beam
! Clean residual mean=-0.000000 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.0734507 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.0734507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081277Jy  sigma=1.045929
! Fit after  self-cal, rms=0.081271Jy  sigma=1.045895
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.31216e-05 Jy
! Component: 100  -  total flux cleaned = 8.31798e-05 Jy
! Component: 150  -  total flux cleaned = 9.75469e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104429 Jy
! Total flux subtracted in 200 components = 0.000104429 Jy
! Clean residual min=-0.002576 max=0.002240 Jy/beam
! Clean residual mean=-0.000000 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0735552 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 42 components and 0.0735552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081268Jy  sigma=1.045844
! Fit after  self-cal, rms=0.081267Jy  sigma=1.045818
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081267Jy  sigma=1.045818
! Fit after  self-cal, rms=0.082638Jy  sigma=1.044456
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=5.269 mas, bpa=-4.173 degrees
! Estimated noise=0.735792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016183 Jy
! Component: 100  -  total flux cleaned = 0.00215531 Jy
! Component: 150  -  total flux cleaned = 0.00222896 Jy
! Component: 200  -  total flux cleaned = 0.00225351 Jy
! Total flux subtracted in 200 components = 0.00225351 Jy
! Clean residual min=-0.002656 max=0.002762 Jy/beam
! Clean residual mean=-0.000000 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.0758087 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.0758087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082515Jy  sigma=1.045776
! Fit after  self-cal, rms=0.082505Jy  sigma=1.045407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.0666e-05 Jy
! Component: 100  -  total flux cleaned = 3.94444e-05 Jy
! Component: 150  -  total flux cleaned = 5.35554e-05 Jy
! Component: 200  -  total flux cleaned = 6.55879e-05 Jy
! Total flux subtracted in 200 components = 6.55879e-05 Jy
! Clean residual min=-0.002678 max=0.002796 Jy/beam
! Clean residual mean=-0.000000 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.0758743 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 51 components and 0.0758743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082505Jy  sigma=1.045593
! Fit after  self-cal, rms=0.082504Jy  sigma=1.045520
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.825 mas, bmaj=2.412 mas, bpa=-6.702 degrees
! Estimated noise=0.545279 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.825 x 2.412 at -6.702 degrees (North through East)
! Clean map  min=-0.0024223  max=0.059304 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6209 mas, bmaj=2.067 mas, bpa=-9.338 degrees
! Estimated noise=0.739166 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.040786 Jy
! Component: 100  -  total flux cleaned = 0.0542538 Jy
! Component: 150  -  total flux cleaned = 0.0620473 Jy
! Component: 200  -  total flux cleaned = 0.0667686 Jy
! Total flux subtracted in 200 components = 0.0667686 Jy
! Clean residual min=-0.003360 max=0.003383 Jy/beam
! Clean residual mean=-0.000001 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.0667686 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0667686 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.825 mas, bmaj=2.412 mas, bpa=-6.702 degrees
! Estimated noise=0.545279 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00436756 Jy
! Component: 100  -  total flux cleaned = 0.00663979 Jy
! Component: 150  -  total flux cleaned = 0.00787861 Jy
! Component: 200  -  total flux cleaned = 0.00853686 Jy
! Total flux subtracted in 200 components = 0.00853686 Jy
! Clean residual min=-0.002600 max=0.002231 Jy/beam
! Clean residual mean=-0.000000 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.0753055 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.0753054 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=5.269 mas, bpa=-4.173 degrees
! Estimated noise=0.735792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000364 Jy
! Component: 100  -  total flux cleaned = 0.000379307 Jy
! Component: 150  -  total flux cleaned = 0.000407176 Jy
! Component: 200  -  total flux cleaned = 0.000419234 Jy
! Total flux subtracted in 200 components = 0.000419234 Jy
! Clean residual min=-0.002604 max=0.002756 Jy/beam
! Clean residual mean=-0.000000 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.0757247 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.14817e-05 Jy
! Component: 100  -  total flux cleaned = 3.13736e-05 Jy
! Component: 150  -  total flux cleaned = 4.83415e-05 Jy
! Component: 200  -  total flux cleaned = 6.30883e-05 Jy
! Total flux subtracted in 200 components = 6.30883e-05 Jy
! Clean residual min=-0.002632 max=0.002756 Jy/beam
! Clean residual mean=-0.000000 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.0757878 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 36 components and 0.0757878 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.825 mas, bmaj=2.412 mas, bpa=-6.702 degrees
! Estimated noise=0.545279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000318962 Jy
! Component: 100  -  total flux cleaned = -0.000300557 Jy
! Component: 150  -  total flux cleaned = -0.00028667 Jy
! Component: 200  -  total flux cleaned = -0.000262245 Jy
! Total flux subtracted in 200 components = -0.000262245 Jy
! Clean residual min=-0.002596 max=0.002245 Jy/beam
! Clean residual mean=-0.000000 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.0755255 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.0755255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082511Jy  sigma=1.045126
! Fit after  self-cal, rms=0.082509Jy  sigma=1.045010
wmodel J1714-2053_X_map.mod
! Writing 45 model components to file: J1714-2053_X_map.mod
wobs   J1714-2053_X_uvs.fits
! Writing UV FITS file: J1714-2053_X_uvs.fits
wwins  J1714-2053_X_map.win
! wwins: Wrote 1 windows to J1714-2053_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000511328 Jy
! Component: 100  -  total flux cleaned = -0.00087447 Jy
! Component: 150  -  total flux cleaned = -0.00117986 Jy
! Component: 200  -  total flux cleaned = -0.00136142 Jy
! Component: 250  -  total flux cleaned = -0.00146498 Jy
! Component: 300  -  total flux cleaned = -0.00149764 Jy
! Component: 350  -  total flux cleaned = -0.00146516 Jy
! Component: 400  -  total flux cleaned = -0.00143384 Jy
! Component: 450  -  total flux cleaned = -0.00140343 Jy
! Component: 500  -  total flux cleaned = -0.00137375 Jy
! Component: 550  -  total flux cleaned = -0.00131747 Jy
! Component: 600  -  total flux cleaned = -0.00137312 Jy
! Component: 650  -  total flux cleaned = -0.00131956 Jy
! Component: 700  -  total flux cleaned = -0.00131948 Jy
! Component: 750  -  total flux cleaned = -0.00129322 Jy
! Component: 800  -  total flux cleaned = -0.00134344 Jy
! Component: 850  -  total flux cleaned = -0.00136783 Jy
! Component: 900  -  total flux cleaned = -0.00146498 Jy
! Component: 950  -  total flux cleaned = -0.00153648 Jy
! Component: 1000  -  total flux cleaned = -0.00163036 Jy
! Component: 1050  -  total flux cleaned = -0.00167672 Jy
! Component: 1100  -  total flux cleaned = -0.00181276 Jy
! Component: 1150  -  total flux cleaned = -0.00190166 Jy
! Component: 1200  -  total flux cleaned = -0.00190178 Jy
! Component: 1250  -  total flux cleaned = -0.00198813 Jy
! Component: 1300  -  total flux cleaned = -0.00200938 Jy
! Component: 1350  -  total flux cleaned = -0.0020723 Jy
! Component: 1400  -  total flux cleaned = -0.00209281 Jy
! Component: 1450  -  total flux cleaned = -0.00219507 Jy
! Component: 1500  -  total flux cleaned = -0.00219519 Jy
! Component: 1550  -  total flux cleaned = -0.00227506 Jy
! Component: 1600  -  total flux cleaned = -0.0023146 Jy
! Component: 1650  -  total flux cleaned = -0.00239208 Jy
! Component: 1700  -  total flux cleaned = -0.00243058 Jy
! Component: 1750  -  total flux cleaned = -0.00250641 Jy
! Component: 1800  -  total flux cleaned = -0.00252521 Jy
! Component: 1850  -  total flux cleaned = -0.00261793 Jy
! Component: 1900  -  total flux cleaned = -0.00263638 Jy
! Component: 1950  -  total flux cleaned = -0.00272678 Jy
! Component: 2000  -  total flux cleaned = -0.0028518 Jy
! Component: 2050  -  total flux cleaned = -0.00290465 Jy
! Component: 2100  -  total flux cleaned = -0.00299196 Jy
! Component: 2150  -  total flux cleaned = -0.00306125 Jy
! Component: 2200  -  total flux cleaned = -0.0031296 Jy
! Component: 2250  -  total flux cleaned = -0.00321426 Jy
! Component: 2300  -  total flux cleaned = -0.00328119 Jy
! Component: 2350  -  total flux cleaned = -0.00331452 Jy
! Component: 2400  -  total flux cleaned = -0.00334758 Jy
! Component: 2450  -  total flux cleaned = -0.0034127 Jy
! Component: 2500  -  total flux cleaned = -0.0034611 Jy
! Component: 2550  -  total flux cleaned = -0.00346095 Jy
! Component: 2600  -  total flux cleaned = -0.00352421 Jy
! Component: 2650  -  total flux cleaned = -0.00353982 Jy
! Component: 2700  -  total flux cleaned = -0.00357073 Jy
! Component: 2750  -  total flux cleaned = -0.00357066 Jy
! Component: 2800  -  total flux cleaned = -0.0036317 Jy
! Component: 2850  -  total flux cleaned = -0.00358636 Jy
! Component: 2900  -  total flux cleaned = -0.00357158 Jy
! Component: 2950  -  total flux cleaned = -0.00360147 Jy
! Component: 3000  -  total flux cleaned = -0.00357202 Jy
! Component: 3050  -  total flux cleaned = -0.00358687 Jy
! Component: 3100  -  total flux cleaned = -0.003616 Jy
! Component: 3150  -  total flux cleaned = -0.0035727 Jy
! Component: 3200  -  total flux cleaned = -0.00360119 Jy
! Component: 3250  -  total flux cleaned = -0.00360124 Jy
! Component: 3300  -  total flux cleaned = -0.00360114 Jy
! Component: 3350  -  total flux cleaned = -0.00354505 Jy
! Component: 3400  -  total flux cleaned = -0.003545 Jy
! Component: 3450  -  total flux cleaned = -0.00353128 Jy
! Component: 3500  -  total flux cleaned = -0.00358604 Jy
! Component: 3550  -  total flux cleaned = -0.00355863 Jy
! Component: 3600  -  total flux cleaned = -0.00358564 Jy
! Component: 3650  -  total flux cleaned = -0.00357213 Jy
! Component: 3700  -  total flux cleaned = -0.00358548 Jy
! Component: 3750  -  total flux cleaned = -0.00358545 Jy
! Component: 3800  -  total flux cleaned = -0.00358551 Jy
! Component: 3850  -  total flux cleaned = -0.00359873 Jy
! Component: 3900  -  total flux cleaned = -0.00355949 Jy
! Component: 3950  -  total flux cleaned = -0.00354656 Jy
! Component: 4000  -  total flux cleaned = -0.00357238 Jy
! Component: 4050  -  total flux cleaned = -0.00354682 Jy
! Total flux subtracted in 4096 components = -0.00357231 Jy
! Clean residual min=-0.000742 max=0.000738 Jy/beam
! Clean residual mean=0.000000 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.0719532 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 372 components and 0.0719533 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/sb072/temp_maps//J1714-2053_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.825 x 2.412 at -6.702 degrees (North through East)
! Clean map  min=-0.0017191  max=0.059091 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1714-2053_X_map.fits
wmodel /vlbi/sb072/temp_maps//J1714-2053_X_map.mod
! Writing 372 model components to file: /vlbi/sb072/temp_maps//J1714-2053_X_map.mod
wobs   /vlbi/sb072/temp_maps//J1714-2053_X_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J1714-2053_X_uvs.fits
wwins  /vlbi/sb072/temp_maps//J1714-2053_X_map.win
! wwins: Wrote 2 windows to /vlbi/sb072/temp_maps//J1714-2053_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0590913 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000233033 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.18308 1.18308 2.36617 4.73233 9.46467 18.9293 37.8587 75.7173
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  253.574 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J1714-2053_X_dfm.log closed on Thu Jan 31 09:43:00 2019