! Started logfile: /vlbi/sb072/temp_maps//J1625-2527_C_dfm.log on Tue Mar 5 23:19:33 2019 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/sb072/temp_maps//J1625-2527_C_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J1625-2527_C_uvm.fits ! AN table 1: 4 integrations on 21 of 21 possible baselines. ! AN table 2: 6 integrations on 36 of 36 possible baselines. ! AN table 3: 4 integrations on 36 of 36 possible baselines. ! AN table 4: 6 integrations on 28 of 28 possible baselines. ! AN table 5: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965909 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 6120 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J1625-2527_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.078567Jy sigma=35.565975 ! Fit after self-cal, rms=0.606925Jy sigma=19.779112 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.209 mas, bmaj=3.317 mas, bpa=-6.963 degrees ! Estimated noise=0.458202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.281438 Jy ! Component: 100 - total flux cleaned = 0.35431 Jy ! Total flux subtracted in 100 components = 0.35431 Jy ! Clean residual min=-0.012911 max=0.034532 Jy/beam ! Clean residual mean=-0.000032 rms=0.003295 Jy/beam ! Combined flux in latest and established models = 0.35431 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.35431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.128318Jy sigma=4.326628 ! Fit after self-cal, rms=0.128312Jy sigma=4.326076 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415191 Jy ! Component: 100 - total flux cleaned = 0.0680364 Jy ! Total flux subtracted in 100 components = 0.0680364 Jy ! Clean residual min=-0.009454 max=0.016695 Jy/beam ! Clean residual mean=-0.000027 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 0.422346 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.422346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099032Jy sigma=3.305346 ! Fit after self-cal, rms=0.099029Jy sigma=3.304753 ! Inverting map ! Added new window around map position (-0.9, -4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185802 Jy ! Component: 100 - total flux cleaned = 0.0314887 Jy ! Total flux subtracted in 100 components = 0.0314887 Jy ! Clean residual min=-0.008745 max=0.014903 Jy/beam ! Clean residual mean=-0.000024 rms=0.002250 Jy/beam ! Combined flux in latest and established models = 0.453835 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.453835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.090688Jy sigma=3.007425 ! Fit after self-cal, rms=0.090654Jy sigma=3.006342 ! Inverting map ! Added new window around map position (-17.4, 32.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136084 Jy ! Component: 100 - total flux cleaned = 0.0222895 Jy ! Total flux subtracted in 100 components = 0.0222895 Jy ! Clean residual min=-0.008844 max=0.012711 Jy/beam ! Clean residual mean=-0.000024 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 0.476124 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.476124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.086755Jy sigma=2.856573 ! Fit after self-cal, rms=0.086625Jy sigma=2.850204 ! Inverting map ! Added new window around map position (-3, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013047 Jy ! Component: 100 - total flux cleaned = 0.0216203 Jy ! Total flux subtracted in 100 components = 0.0216203 Jy ! Clean residual min=-0.008525 max=0.009877 Jy/beam ! Clean residual mean=-0.000022 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.497745 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.497745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082410Jy sigma=2.709026 ! Fit after self-cal, rms=0.081989Jy sigma=2.700512 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.626 mas, bmaj=4.129 mas, bpa=-5.209 degrees ! Estimated noise=0.296017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171047 Jy ! Component: 100 - total flux cleaned = 0.0283796 Jy ! Component: 150 - total flux cleaned = 0.0365472 Jy ! Component: 200 - total flux cleaned = 0.0425324 Jy ! Total flux subtracted in 200 components = 0.0425324 Jy ! Clean residual min=-0.008839 max=0.011795 Jy/beam ! Clean residual mean=-0.000026 rms=0.002764 Jy/beam ! Combined flux in latest and established models = 0.540277 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 111 components and 0.540277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.077875Jy sigma=2.570562 ! Fit after self-cal, rms=0.077532Jy sigma=2.561058 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.626 x 4.129 at -5.209 degrees (North through East) ! Clean map min=-0.0083647 max=0.38228 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.89 KP 0.93 LA 1.03 ! MK 0.98 OV 1.00 PT 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.01 HN 1.08 LA 1.04 ! MK 0.99 NL 1.04 OV 1.21 PT 1.01 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 1.02 KP 1.02 LA 1.09 ! MK 1.07 NL 0.97 OV 1.10 PT 0.98 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 KP 0.93 LA 0.77 MK 0.97 ! NL 1.00 OV 0.68 PT 0.80 SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.87 HN 1.00 KP 0.90 ! LA 0.97 MK 0.98 NL 0.98 OV 0.94 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 KP 0.95 LA 1.02 ! MK 0.96 OV 0.99 PT 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.04 HN 1.02 LA 1.05 ! MK 1.03 NL 1.07 OV 1.15 PT 1.02 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.00 KP 1.03 LA 1.07 ! MK 1.09 NL 0.90 OV 1.10 PT 1.00 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 KP 0.97 LA 0.76 MK 0.94 ! NL 1.03 OV 0.68 PT 0.90 SC 1.09 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.87 HN 0.99 KP 0.89 ! LA 0.97 MK 0.97 NL 0.99 OV 0.94 ! PT 0.87 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.92 KP 0.92 LA 1.03 ! MK 0.99 OV 0.98 PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.01 HN 1.14 LA 1.08 ! MK 1.00 NL 1.19 OV 1.13 PT 1.04 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 1.00 KP 1.02 LA 1.08 ! MK 1.10 NL 0.94 OV 1.09 PT 1.00 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.20 KP 1.00 LA 0.80 MK 1.07 ! NL 1.07 OV 0.92 PT 0.88 SC 1.09 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.88 HN 1.00 KP 0.90 ! LA 0.97 MK 1.00 NL 0.99 OV 0.96 ! PT 0.87 SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.90 KP 0.93 LA 1.01 ! MK 0.94 OV 1.01 PT 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.25 FD 1.04 HN 1.01 LA 0.99 ! MK 1.01 NL 0.97 OV 1.12 PT 1.03 ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 1.01 KP 1.04 LA 1.11 ! MK 1.07 NL 0.94 OV 1.07 PT 0.98 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.14 KP 1.01 LA 0.84 MK 0.98 ! NL 1.02 OV 1.04 PT 0.93 SC 1.10 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.87 HN 1.02 KP 0.90 ! LA 0.95 MK 1.00 NL 1.06 OV 0.94 ! PT 0.77 SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 KP 0.94 LA 1.03 ! MK 0.98 OV 1.03 PT 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.06 HN 1.15 LA 1.15 ! MK 0.99 NL 1.12 OV 1.15 PT 1.09 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.22 FD 1.01 KP 1.03 LA 1.10 ! MK 1.05 NL 0.97 OV 1.07 PT 0.99 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.25 KP 1.00 LA 1.10 MK 0.97 ! NL 1.03 OV 1.03 PT 0.91 SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.88 HN 0.98 KP 0.89 ! LA 0.96 MK 0.97 NL 0.99 OV 0.92 ! PT 0.86 SC 0.89 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 KP 0.94 LA 1.06 ! MK 1.01 OV 1.04 PT 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.03 HN 1.14 LA 1.18 ! MK 1.00 NL 1.17 OV 1.14 PT 1.06 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.01 KP 1.01 LA 1.08 ! MK 1.06 NL 1.74 OV 1.02 PT 1.00 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 KP 1.00 LA 1.09 MK 0.95 ! NL 1.03 OV 1.04 PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 0.87 HN 0.98 KP 0.88 ! LA 0.96 MK 0.96 NL 0.98 OV 0.92 ! PT 0.86 SC 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 KP 0.94 LA 1.04 ! MK 1.01 OV 1.04 PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.04 HN 1.17 LA 1.17 ! MK 0.99 NL 1.14 OV 1.16 PT 1.05 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.00 KP 1.00 LA 1.10 ! MK 1.06 NL 0.69 OV 1.04 PT 1.00 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 KP 0.98 LA 1.08 MK 0.93 ! NL 1.03 OV 1.06 PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.87 HN 0.98 KP 0.89 ! LA 0.96 MK 0.95 NL 0.99 OV 0.92 ! PT 0.87 SC 0.90 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 KP 0.94 LA 1.07 ! MK 0.99 OV 1.04 PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.03 HN 1.16 LA 1.18 ! MK 1.00 NL 1.16 OV 1.16 PT 1.06 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.98 KP 1.00 LA 1.09 ! MK 1.06 NL 0.90 OV 1.07 PT 0.99 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 KP 1.00 LA 1.08 MK 0.94 ! NL 1.04 OV 1.03 PT 0.89 SC 1.02 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.87 HN 0.98 KP 0.89 ! LA 0.96 MK 0.96 NL 0.98 OV 0.91 ! PT 0.86 SC 0.90 ! ! ! Fit before self-cal, rms=0.077532Jy sigma=2.561058 ! Fit after self-cal, rms=0.031298Jy sigma=0.789970 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.635 mas, bmaj=4.162 mas, bpa=-5.392 degrees ! Estimated noise=0.297483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00537278 Jy ! Component: 100 - total flux cleaned = -0.00665186 Jy ! Component: 150 - total flux cleaned = -0.00712185 Jy ! Component: 200 - total flux cleaned = -0.00749893 Jy ! Total flux subtracted in 200 components = -0.00749893 Jy ! Clean residual min=-0.001976 max=0.003581 Jy/beam ! Clean residual mean=-0.000014 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.532778 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 122 components and 0.532778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030029Jy sigma=0.756517 ! Fit after self-cal, rms=0.029806Jy sigma=0.749749 ! Inverting map ! Added new window around map position (3, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161999 Jy ! Component: 100 - total flux cleaned = 0.00152541 Jy ! Component: 150 - total flux cleaned = 0.00159374 Jy ! Component: 200 - total flux cleaned = 0.00159301 Jy ! Total flux subtracted in 200 components = 0.00159301 Jy ! Clean residual min=-0.001834 max=0.002515 Jy/beam ! Clean residual mean=-0.000013 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.534371 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 0.534371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029238Jy sigma=0.731860 ! Fit after self-cal, rms=0.029149Jy sigma=0.729680 ! Inverting map ! Added new window around map position (-6.3, 8.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014573 Jy ! Component: 100 - total flux cleaned = 0.00145583 Jy ! Component: 150 - total flux cleaned = 0.00156926 Jy ! Component: 200 - total flux cleaned = 0.00177997 Jy ! Total flux subtracted in 200 components = 0.00177997 Jy ! Clean residual min=-0.001774 max=0.001947 Jy/beam ! Clean residual mean=-0.000013 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.536151 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 153 components and 0.536151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028777Jy sigma=0.720239 ! Fit after self-cal, rms=0.028749Jy sigma=0.719618 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028749Jy sigma=0.719618 ! Fit after self-cal, rms=0.028340Jy sigma=0.705457 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.634 mas, bmaj=4.163 mas, bpa=-5.422 degrees ! Estimated noise=0.297085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212143 Jy ! Component: 100 - total flux cleaned = -0.00270546 Jy ! Component: 150 - total flux cleaned = -0.002707 Jy ! Component: 200 - total flux cleaned = -0.00261021 Jy ! Total flux subtracted in 200 components = -0.00261021 Jy ! Clean residual min=-0.001492 max=0.001620 Jy/beam ! Clean residual mean=-0.000011 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.533541 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 169 components and 0.533541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027935Jy sigma=0.694876 ! Fit after self-cal, rms=0.027880Jy sigma=0.693513 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215029 Jy ! Component: 100 - total flux cleaned = -7.27657e-05 Jy ! Component: 150 - total flux cleaned = 1.13723e-05 Jy ! Component: 200 - total flux cleaned = 9.07192e-05 Jy ! Total flux subtracted in 200 components = 9.07192e-05 Jy ! Clean residual min=-0.001471 max=0.001580 Jy/beam ! Clean residual mean=-0.000011 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.533632 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 179 components and 0.533631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027702Jy sigma=0.689051 ! Fit after self-cal, rms=0.027681Jy sigma=0.688656 ! Inverting map ! Added new window around map position (-3.3, -18.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000794735 Jy ! Component: 100 - total flux cleaned = 0.000962264 Jy ! Component: 150 - total flux cleaned = 0.00123077 Jy ! Component: 200 - total flux cleaned = 0.00133884 Jy ! Total flux subtracted in 200 components = 0.00133884 Jy ! Clean residual min=-0.001413 max=0.001393 Jy/beam ! Clean residual mean=-0.000011 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.53497 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 195 components and 0.53497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027521Jy sigma=0.684277 ! Fit after self-cal, rms=0.027511Jy sigma=0.684096 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027511Jy sigma=0.684096 ! Fit after self-cal, rms=0.027433Jy sigma=0.680548 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.634 mas, bmaj=4.165 mas, bpa=-5.448 degrees ! Estimated noise=0.29692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136444 Jy ! Component: 100 - total flux cleaned = -0.0015781 Jy ! Component: 150 - total flux cleaned = -0.00150545 Jy ! Component: 200 - total flux cleaned = -0.00140363 Jy ! Total flux subtracted in 200 components = -0.00140363 Jy ! Clean residual min=-0.001274 max=0.001171 Jy/beam ! Clean residual mean=-0.000010 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.533567 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 210 components and 0.533567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027274Jy sigma=0.676341 ! Fit after self-cal, rms=0.027256Jy sigma=0.675975 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016604 Jy ! Component: 100 - total flux cleaned = -6.83705e-05 Jy ! Component: 150 - total flux cleaned = -6.23662e-06 Jy ! Component: 200 - total flux cleaned = 8.26921e-05 Jy ! Total flux subtracted in 200 components = 8.26921e-05 Jy ! Clean residual min=-0.001230 max=0.001125 Jy/beam ! Clean residual mean=-0.000010 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.533649 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 218 components and 0.533649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027168Jy sigma=0.673638 ! Fit after self-cal, rms=0.027160Jy sigma=0.673524 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027160Jy sigma=0.673524 ! Fit after self-cal, rms=0.027159Jy sigma=0.672516 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=9.15 mas, bpa=-0.5816 degrees ! Estimated noise=0.366826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435212 Jy ! Component: 100 - total flux cleaned = -0.000191698 Jy ! Component: 150 - total flux cleaned = -7.56147e-05 Jy ! Component: 200 - total flux cleaned = 2.8201e-05 Jy ! Total flux subtracted in 200 components = 2.8201e-05 Jy ! Clean residual min=-0.001327 max=0.001484 Jy/beam ! Clean residual mean=-0.000017 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.533677 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 236 components and 0.533678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027097Jy sigma=0.670606 ! Fit after self-cal, rms=0.027081Jy sigma=0.670231 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117205 Jy ! Component: 100 - total flux cleaned = 1.21046e-05 Jy ! Component: 150 - total flux cleaned = 0.0001048 Jy ! Component: 200 - total flux cleaned = 0.000190562 Jy ! Total flux subtracted in 200 components = 0.000190562 Jy ! Clean residual min=-0.001289 max=0.001407 Jy/beam ! Clean residual mean=-0.000017 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.533868 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 247 components and 0.533868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027052Jy sigma=0.669149 ! Fit after self-cal, rms=0.027042Jy sigma=0.669006 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.634 mas, bmaj=4.167 mas, bpa=-5.476 degrees ! Estimated noise=0.296821 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.634 x 4.167 at -5.476 degrees (North through East) ! Clean map min=-0.0013759 max=0.3834 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.213 mas, bmaj=3.333 mas, bpa=-7.151 degrees ! Estimated noise=0.460929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28303 Jy ! Component: 100 - total flux cleaned = 0.355911 Jy ! Component: 150 - total flux cleaned = 0.397185 Jy ! Component: 200 - total flux cleaned = 0.423676 Jy ! Total flux subtracted in 200 components = 0.423676 Jy ! Clean residual min=-0.005045 max=0.014716 Jy/beam ! Clean residual mean=-0.000015 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.423676 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.423676 Jy ! Inverting map and beam ! Estimated beam: bmin=1.634 mas, bmaj=4.167 mas, bpa=-5.476 degrees ! Estimated noise=0.296821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371775 Jy ! Component: 100 - total flux cleaned = 0.0576629 Jy ! Component: 150 - total flux cleaned = 0.0700323 Jy ! Component: 200 - total flux cleaned = 0.0782975 Jy ! Total flux subtracted in 200 components = 0.0782975 Jy ! Clean residual min=-0.002354 max=0.005039 Jy/beam ! Clean residual mean=-0.000014 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.501973 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 103 components and 0.501973 Jy ! Inverting map ! Added new window around map position (-0.3, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616746 Jy ! Component: 100 - total flux cleaned = 0.0108693 Jy ! Component: 150 - total flux cleaned = 0.0145144 Jy ! Component: 200 - total flux cleaned = 0.0173786 Jy ! Total flux subtracted in 200 components = 0.0173786 Jy ! Clean residual min=-0.001626 max=0.002397 Jy/beam ! Clean residual mean=-0.000012 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.519352 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 159 components and 0.519352 Jy ! Inverting map ! Added new window around map position (1.8, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252156 Jy ! Component: 100 - total flux cleaned = 0.00445698 Jy ! Component: 150 - total flux cleaned = 0.00609247 Jy ! Component: 200 - total flux cleaned = 0.00750097 Jy ! Total flux subtracted in 200 components = 0.00750097 Jy ! Clean residual min=-0.001306 max=0.001515 Jy/beam ! Clean residual mean=-0.000010 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.526853 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 206 components and 0.526853 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=9.15 mas, bpa=-0.5816 degrees ! Estimated noise=0.366826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194301 Jy ! Component: 100 - total flux cleaned = 0.00337251 Jy ! Component: 150 - total flux cleaned = 0.00448054 Jy ! Component: 200 - total flux cleaned = 0.00535203 Jy ! Total flux subtracted in 200 components = 0.00535203 Jy ! Clean residual min=-0.001355 max=0.001358 Jy/beam ! Clean residual mean=-0.000017 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.532205 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691596 Jy ! Component: 100 - total flux cleaned = 0.00125046 Jy ! Component: 150 - total flux cleaned = 0.00170882 Jy ! Component: 200 - total flux cleaned = 0.00208691 Jy ! Total flux subtracted in 200 components = 0.00208691 Jy ! Clean residual min=-0.001286 max=0.001231 Jy/beam ! Clean residual mean=-0.000016 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.534292 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 271 components and 0.534292 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.634 mas, bmaj=4.167 mas, bpa=-5.476 degrees ! Estimated noise=0.296821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147612 Jy ! Component: 100 - total flux cleaned = -0.000123485 Jy ! Component: 150 - total flux cleaned = -7.76295e-05 Jy ! Component: 200 - total flux cleaned = -3.48243e-05 Jy ! Total flux subtracted in 200 components = -3.48243e-05 Jy ! Clean residual min=-0.001145 max=0.001143 Jy/beam ! Clean residual mean=-0.000009 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.534257 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 295 components and 0.534257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026819Jy sigma=0.662653 ! Fit after self-cal, rms=0.026756Jy sigma=0.661037 wmodel J1625-2527_C_map.mod ! Writing 295 model components to file: J1625-2527_C_map.mod wobs J1625-2527_C_uvs.fits ! Writing UV FITS file: J1625-2527_C_uvs.fits wwins J1625-2527_C_map.win ! wwins: Wrote 9 windows to J1625-2527_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.75234e-06 Jy ! Component: 100 - total flux cleaned = 1.48373e-05 Jy ! Component: 150 - total flux cleaned = 6.79567e-05 Jy ! Component: 200 - total flux cleaned = 0.000187507 Jy ! Component: 250 - total flux cleaned = 0.000286601 Jy ! Component: 300 - total flux cleaned = 0.000367107 Jy ! Component: 350 - total flux cleaned = 0.000461583 Jy ! Component: 400 - total flux cleaned = 0.000523043 Jy ! Component: 450 - total flux cleaned = 0.000598146 Jy ! Component: 500 - total flux cleaned = 0.000598442 Jy ! Component: 550 - total flux cleaned = 0.000613144 Jy ! Component: 600 - total flux cleaned = 0.000641495 Jy ! Component: 650 - total flux cleaned = 0.000655643 Jy ! Component: 700 - total flux cleaned = 0.000697253 Jy ! Component: 750 - total flux cleaned = 0.000751868 Jy ! Component: 800 - total flux cleaned = 0.000765398 Jy ! Component: 850 - total flux cleaned = 0.000818916 Jy ! Component: 900 - total flux cleaned = 0.000884924 Jy ! Component: 950 - total flux cleaned = 0.000911122 Jy ! Component: 1000 - total flux cleaned = 0.000988524 Jy ! Component: 1050 - total flux cleaned = 0.00102682 Jy ! Component: 1100 - total flux cleaned = 0.00107747 Jy ! Component: 1150 - total flux cleaned = 0.0010773 Jy ! Component: 1200 - total flux cleaned = 0.00111462 Jy ! Component: 1250 - total flux cleaned = 0.00112706 Jy ! Component: 1300 - total flux cleaned = 0.00117585 Jy ! Component: 1350 - total flux cleaned = 0.00121206 Jy ! Component: 1400 - total flux cleaned = 0.00120007 Jy ! Component: 1450 - total flux cleaned = 0.0012712 Jy ! Component: 1500 - total flux cleaned = 0.00127114 Jy ! Component: 1550 - total flux cleaned = 0.00130635 Jy ! Component: 1600 - total flux cleaned = 0.0013062 Jy ! Component: 1650 - total flux cleaned = 0.00136381 Jy ! Component: 1700 - total flux cleaned = 0.00138655 Jy ! Component: 1750 - total flux cleaned = 0.00142057 Jy ! Component: 1800 - total flux cleaned = 0.00146542 Jy ! Component: 1850 - total flux cleaned = 0.00147649 Jy ! Component: 1900 - total flux cleaned = 0.00147642 Jy ! Component: 1950 - total flux cleaned = 0.00148733 Jy ! Component: 2000 - total flux cleaned = 0.00154161 Jy ! Component: 2050 - total flux cleaned = 0.00153063 Jy ! Component: 2100 - total flux cleaned = 0.00158431 Jy ! Component: 2150 - total flux cleaned = 0.001563 Jy ! Component: 2200 - total flux cleaned = 0.00160518 Jy ! Component: 2250 - total flux cleaned = 0.00163677 Jy ! Component: 2300 - total flux cleaned = 0.00163671 Jy ! Component: 2350 - total flux cleaned = 0.00164704 Jy ! Component: 2400 - total flux cleaned = 0.00165739 Jy ! Component: 2450 - total flux cleaned = 0.0016778 Jy ! Component: 2500 - total flux cleaned = 0.00170826 Jy ! Component: 2550 - total flux cleaned = 0.00169819 Jy ! Component: 2600 - total flux cleaned = 0.00167811 Jy ! Component: 2650 - total flux cleaned = 0.00169805 Jy ! Component: 2700 - total flux cleaned = 0.00168817 Jy ! Component: 2750 - total flux cleaned = 0.00170795 Jy ! Component: 2800 - total flux cleaned = 0.00172765 Jy ! Component: 2850 - total flux cleaned = 0.0016886 Jy ! Component: 2900 - total flux cleaned = 0.00169836 Jy ! Component: 2950 - total flux cleaned = 0.00172735 Jy ! Component: 3000 - total flux cleaned = 0.0016985 Jy ! Component: 3050 - total flux cleaned = 0.00172707 Jy ! Component: 3100 - total flux cleaned = 0.00176508 Jy ! Component: 3150 - total flux cleaned = 0.00173669 Jy ! Component: 3200 - total flux cleaned = 0.00173667 Jy ! Component: 3250 - total flux cleaned = 0.00172726 Jy ! Component: 3300 - total flux cleaned = 0.00174577 Jy ! Component: 3350 - total flux cleaned = 0.00175498 Jy ! Component: 3400 - total flux cleaned = 0.00172738 Jy ! Component: 3450 - total flux cleaned = 0.00177311 Jy ! Component: 3500 - total flux cleaned = 0.00174586 Jy ! Component: 3550 - total flux cleaned = 0.00175495 Jy ! Component: 3600 - total flux cleaned = 0.00174597 Jy ! Component: 3650 - total flux cleaned = 0.00177296 Jy ! Component: 3700 - total flux cleaned = 0.00173719 Jy ! Component: 3750 - total flux cleaned = 0.00178166 Jy ! Component: 3800 - total flux cleaned = 0.00175504 Jy ! Component: 3850 - total flux cleaned = 0.00172861 Jy ! Component: 3900 - total flux cleaned = 0.00171105 Jy ! Component: 3950 - total flux cleaned = 0.00173727 Jy ! Component: 4000 - total flux cleaned = 0.00171123 Jy ! Component: 4050 - total flux cleaned = 0.00173714 Jy ! Total flux subtracted in 4096 components = 0.00171136 Jy ! Clean residual min=-0.000570 max=0.000451 Jy/beam ! Clean residual mean=-0.000003 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.535969 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 601 components and 0.535969 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J1625-2527_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.634 x 4.167 at -5.476 degrees (North through East) ! Clean map min=-0.00077632 max=0.38629 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1625-2527_C_map.fits wmodel /vlbi/sb072/temp_maps//J1625-2527_C_map.mod ! Writing 601 model components to file: /vlbi/sb072/temp_maps//J1625-2527_C_map.mod wobs /vlbi/sb072/temp_maps//J1625-2527_C_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J1625-2527_C_uvs.fits wwins /vlbi/sb072/temp_maps//J1625-2527_C_map.win ! wwins: Wrote 10 windows to /vlbi/sb072/temp_maps//J1625-2527_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.386285 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161086 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.125104 0.125104 0.250208 0.500416 1.00083 2.00166 4.00333 8.00665 16.0133 32.0266 64.0532 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.386 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2398 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J1625-2527_C_dfm.log closed on Tue Mar 5 23:19:38 2019