! Started logfile: /vlbi/sb072/temp_maps//J1354-0206_X_dfm.log on Tue Mar 5 23:10:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J1354-0206_X_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J1354-0206_X_uvm.fits ! AN table 1: 4 integrations on 28 of 28 possible baselines. ! AN table 2: 3 integrations on 15 of 15 possible baselines. ! AN table 3: 4 integrations on 36 of 36 possible baselines. ! AN table 4: 3 integrations on 3 of 3 possible baselines. ! AN table 5: 4 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1354-0206 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 3152 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1354-0206_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.140566Jy sigma=45.208354 ! Fit after self-cal, rms=0.494642Jy sigma=19.552387 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6561 mas, bmaj=1.844 mas, bpa=-2.273 degrees ! Estimated noise=0.494397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.381319 Jy ! Component: 100 - total flux cleaned = 0.481967 Jy ! Total flux subtracted in 100 components = 0.481967 Jy ! Clean residual min=-0.025083 max=0.042229 Jy/beam ! Clean residual mean=-0.000008 rms=0.004706 Jy/beam ! Combined flux in latest and established models = 0.481967 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.481967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.104559Jy sigma=4.215703 ! Fit after self-cal, rms=0.104538Jy sigma=4.215175 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447119 Jy ! Component: 100 - total flux cleaned = 0.068204 Jy ! Total flux subtracted in 100 components = 0.068204 Jy ! Clean residual min=-0.014978 max=0.016521 Jy/beam ! Clean residual mean=-0.000007 rms=0.002917 Jy/beam ! Combined flux in latest and established models = 0.550171 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.550171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.074594Jy sigma=2.998836 ! Fit after self-cal, rms=0.074544Jy sigma=2.996003 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7904 mas, bmaj=2.138 mas, bpa=-2.433 degrees ! Estimated noise=0.339999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250736 Jy ! Component: 100 - total flux cleaned = 0.038246 Jy ! Component: 150 - total flux cleaned = 0.0452701 Jy ! Component: 200 - total flux cleaned = 0.0490459 Jy ! Total flux subtracted in 200 components = 0.0490459 Jy ! Clean residual min=-0.014769 max=0.017069 Jy/beam ! Clean residual mean=0.000002 rms=0.003406 Jy/beam ! Combined flux in latest and established models = 0.599217 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.599217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.066545Jy sigma=2.653544 ! Fit after self-cal, rms=0.066414Jy sigma=2.649038 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7904 x 2.138 at -2.433 degrees (North through East) ! Clean map min=-0.01391 max=0.5102 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 1.05 LA 1.00 MK 1.00 ! NL 1.18 OV 0.95 PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 MK 0.94 NL 1.09 OV 0.95 ! PT 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.03 KP 1.05 LA 1.06 ! MK 1.00 NL 1.15 OV 1.13 PT 0.98 ! SC 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.92 LA 0.92 MK 0.98 NL 0.95 ! OV 0.98 PT 0.85 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 1.04 LA 1.00 MK 1.02 ! NL 1.17 OV 0.95 PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 MK 0.96 NL 1.06 OV 0.94 ! PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.03 KP 1.04 LA 1.06 ! MK 1.01 NL 1.17 OV 1.15 PT 0.98 ! SC 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.90 LA 0.92 MK 0.98 NL 0.96 ! OV 0.99 PT 0.85 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 1.02 LA 1.00 MK 1.00 ! NL 1.17 OV 0.95 PT 0.96 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 MK 0.97 NL 1.08 OV 0.93 ! PT 0.91 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.04 KP 1.06 LA 1.06 ! MK 1.00 NL 1.14 OV 1.14 PT 0.98 ! SC 1.01 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.93 LA 0.92 MK 0.99 NL 0.94 ! OV 0.98 PT 0.85 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 1.02 LA 1.00 MK 1.02 ! NL 1.17 OV 0.95 PT 0.95 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 MK 0.93 NL 1.08 OV 0.94 ! PT 0.90 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.05 KP 1.06 LA 1.05 ! MK 1.00 NL 1.15 OV 1.15 PT 0.98 ! SC 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.91 LA 0.93 MK 0.99 NL 0.95 ! OV 0.98 PT 0.86 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 1.03 LA 0.99 MK 1.04 ! NL 1.17 OV 0.95 PT 0.95 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 MK 0.95 NL 1.06 OV 0.95 ! PT 0.91 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.05 KP 1.05 LA 1.07 ! MK 1.00 NL 1.15 OV 1.15 PT 0.98 ! SC 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.92 LA 0.93 MK 1.01 NL 0.94 ! OV 0.99 PT 0.86 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 1.05 LA 1.00 MK 1.03 ! NL 1.16 OV 0.95 PT 0.94 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 MK 0.94 NL 1.08 OV 0.95 ! PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.04 KP 1.05 LA 1.06 ! MK 1.02 NL 1.17 OV 1.15 PT 0.98 ! SC 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.92 LA 0.95 MK 1.01 NL 0.94 ! OV 0.98 PT 0.85 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 1.04 LA 1.02 MK 1.04 ! NL 1.19 OV 0.95 PT 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 MK 0.94 NL 1.08 OV 0.93 ! PT 0.90 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.04 KP 1.05 LA 1.06 ! MK 1.02 NL 1.17 OV 1.17 PT 0.98 ! SC 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.92 LA 0.93 MK 1.00 NL 0.96 ! OV 0.98 PT 0.86 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 1.03 LA 0.99 MK 1.06 ! NL 1.17 OV 0.96 PT 0.95 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 MK 0.93 NL 1.07 OV 0.93 ! PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.05 KP 1.07 LA 1.05 ! MK 1.02 NL 1.15 OV 1.16 PT 0.97 ! SC 1.04 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.93 LA 0.93 MK 1.01 NL 0.95 ! OV 0.99 PT 0.86 SC 1.01 ! ! ! Fit before self-cal, rms=0.066414Jy sigma=2.649038 ! Fit after self-cal, rms=0.025784Jy sigma=0.878631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8024 mas, bmaj=2.174 mas, bpa=-1.474 degrees ! Estimated noise=0.344254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545933 Jy ! Component: 100 - total flux cleaned = 0.00601766 Jy ! Component: 150 - total flux cleaned = 0.00584733 Jy ! Component: 200 - total flux cleaned = 0.0056043 Jy ! Total flux subtracted in 200 components = 0.0056043 Jy ! Clean residual min=-0.002786 max=0.003363 Jy/beam ! Clean residual mean=-0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.604821 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.604821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024318Jy sigma=0.820759 ! Fit after self-cal, rms=0.024177Jy sigma=0.815927 ! Inverting map ! Added new window around map position (-4.2, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131198 Jy ! Component: 100 - total flux cleaned = 0.00115695 Jy ! Component: 150 - total flux cleaned = 0.00102554 Jy ! Component: 200 - total flux cleaned = 0.000905874 Jy ! Total flux subtracted in 200 components = 0.000905874 Jy ! Clean residual min=-0.002179 max=0.002410 Jy/beam ! Clean residual mean=-0.000001 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.605727 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.605727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023573Jy sigma=0.794452 ! Fit after self-cal, rms=0.023511Jy sigma=0.792994 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023511Jy sigma=0.792994 ! Fit after self-cal, rms=0.023183Jy sigma=0.785908 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8016 mas, bmaj=2.173 mas, bpa=-1.446 degrees ! Estimated noise=0.343801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106514 Jy ! Component: 100 - total flux cleaned = 0.00125269 Jy ! Component: 150 - total flux cleaned = 0.00111207 Jy ! Component: 200 - total flux cleaned = 0.000943668 Jy ! Total flux subtracted in 200 components = 0.000943668 Jy ! Clean residual min=-0.001728 max=0.002284 Jy/beam ! Clean residual mean=-0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.606671 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.606671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022879Jy sigma=0.775362 ! Fit after self-cal, rms=0.022844Jy sigma=0.774377 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020446 Jy ! Component: 100 - total flux cleaned = 0.00336835 Jy ! Component: 150 - total flux cleaned = 0.00424616 Jy ! Component: 200 - total flux cleaned = 0.00496475 Jy ! Total flux subtracted in 200 components = 0.00496475 Jy ! Clean residual min=-0.001445 max=0.001733 Jy/beam ! Clean residual mean=-0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.611636 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.611636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022562Jy sigma=0.763037 ! Fit after self-cal, rms=0.022548Jy sigma=0.762723 ! Inverting map ! Added new window around map position (44.8, 21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152104 Jy ! Component: 100 - total flux cleaned = 0.00203377 Jy ! Component: 150 - total flux cleaned = 0.00235908 Jy ! Component: 200 - total flux cleaned = 0.00253845 Jy ! Total flux subtracted in 200 components = 0.00253845 Jy ! Clean residual min=-0.001263 max=0.001356 Jy/beam ! Clean residual mean=-0.000001 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.614174 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 90 components and 0.614174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022392Jy sigma=0.757078 ! Fit after self-cal, rms=0.022383Jy sigma=0.756762 ! Inverting map ! Added new window around map position (9.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802134 Jy ! Component: 100 - total flux cleaned = 0.000954328 Jy ! Component: 150 - total flux cleaned = 0.00112557 Jy ! Component: 200 - total flux cleaned = 0.0012598 Jy ! Total flux subtracted in 200 components = 0.0012598 Jy ! Clean residual min=-0.001160 max=0.001140 Jy/beam ! Clean residual mean=-0.000001 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.615434 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.615434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022258Jy sigma=0.753360 ! Fit after self-cal, rms=0.022254Jy sigma=0.753233 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022254Jy sigma=0.753233 ! Fit after self-cal, rms=0.022128Jy sigma=0.751194 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8013 mas, bmaj=2.172 mas, bpa=-1.439 degrees ! Estimated noise=0.343588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772417 Jy ! Component: 100 - total flux cleaned = 0.00094203 Jy ! Component: 150 - total flux cleaned = 0.000993926 Jy ! Component: 200 - total flux cleaned = 0.00106549 Jy ! Total flux subtracted in 200 components = 0.00106549 Jy ! Clean residual min=-0.001124 max=0.001021 Jy/beam ! Clean residual mean=-0.000002 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.616499 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.616499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022047Jy sigma=0.748919 ! Fit after self-cal, rms=0.022044Jy sigma=0.748829 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241621 Jy ! Component: 100 - total flux cleaned = 0.000304517 Jy ! Component: 150 - total flux cleaned = 0.000324228 Jy ! Component: 200 - total flux cleaned = 0.000381868 Jy ! Total flux subtracted in 200 components = 0.000381868 Jy ! Clean residual min=-0.001101 max=0.001017 Jy/beam ! Clean residual mean=-0.000002 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.616881 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 120 components and 0.616881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021997Jy sigma=0.747659 ! Fit after self-cal, rms=0.021996Jy sigma=0.747632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021996Jy sigma=0.747632 ! Fit after self-cal, rms=0.021971Jy sigma=0.747400 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.143 mas, bmaj=4.152 mas, bpa=-0.07907 degrees ! Estimated noise=0.457697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481022 Jy ! Component: 100 - total flux cleaned = 0.000629891 Jy ! Component: 150 - total flux cleaned = 0.000756506 Jy ! Component: 200 - total flux cleaned = 0.000769966 Jy ! Total flux subtracted in 200 components = 0.000769966 Jy ! Clean residual min=-0.001054 max=0.000998 Jy/beam ! Clean residual mean=-0.000004 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.617651 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 0.617651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021943Jy sigma=0.746880 ! Fit after self-cal, rms=0.021942Jy sigma=0.746824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.36518e-05 Jy ! Component: 100 - total flux cleaned = 4.09506e-05 Jy ! Component: 150 - total flux cleaned = 6.52487e-05 Jy ! Component: 200 - total flux cleaned = 9.97176e-05 Jy ! Total flux subtracted in 200 components = 9.97176e-05 Jy ! Clean residual min=-0.001026 max=0.000994 Jy/beam ! Clean residual mean=-0.000004 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.617751 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 144 components and 0.617751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021930Jy sigma=0.746578 ! Fit after self-cal, rms=0.021926Jy sigma=0.746531 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8012 mas, bmaj=2.172 mas, bpa=-1.432 degrees ! Estimated noise=0.343579 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8012 x 2.172 at -1.432 degrees (North through East) ! Clean map min=-0.0010299 max=0.51283 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021926Jy sigma=0.746531 ! Fit after self-cal, rms=0.020519Jy sigma=0.691280 ! Inverting map and beam ! Estimated beam: bmin=0.8011 mas, bmaj=2.172 mas, bpa=-1.435 degrees ! Estimated noise=0.343552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000266698 Jy ! Component: 100 - total flux cleaned = -0.000267521 Jy ! Component: 150 - total flux cleaned = -0.000197687 Jy ! Component: 200 - total flux cleaned = -0.000164242 Jy ! Total flux subtracted in 200 components = -0.000164242 Jy ! Clean residual min=-0.001062 max=0.000957 Jy/beam ! Clean residual mean=-0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.617587 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 156 components and 0.617587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020481Jy sigma=0.690241 ! Fit after self-cal, rms=0.020482Jy sigma=0.690217 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.55608e-05 Jy ! Component: 100 - total flux cleaned = 8.71151e-05 Jy ! Component: 150 - total flux cleaned = 0.000117399 Jy ! Component: 200 - total flux cleaned = 0.000189735 Jy ! Total flux subtracted in 200 components = 0.000189735 Jy ! Clean residual min=-0.001041 max=0.000951 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.617777 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 162 components and 0.617777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020455Jy sigma=0.689543 ! Fit after self-cal, rms=0.020456Jy sigma=0.689529 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020456Jy sigma=0.689529 ! Fit after self-cal, rms=0.020453Jy sigma=0.689453 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6673 mas, bmaj=1.884 mas, bpa=-0.4544 degrees ! Estimated noise=0.503148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.385954 Jy ! Component: 100 - total flux cleaned = 0.483818 Jy ! Component: 150 - total flux cleaned = 0.526828 Jy ! Component: 200 - total flux cleaned = 0.551217 Jy ! Total flux subtracted in 200 components = 0.551217 Jy ! Clean residual min=-0.008731 max=0.013962 Jy/beam ! Clean residual mean=-0.000001 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.551217 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.551217 Jy ! Inverting map and beam ! Estimated beam: bmin=0.801 mas, bmaj=2.172 mas, bpa=-1.43 degrees ! Estimated noise=0.343569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250368 Jy ! Component: 100 - total flux cleaned = 0.0381451 Jy ! Component: 150 - total flux cleaned = 0.0455827 Jy ! Component: 200 - total flux cleaned = 0.0500547 Jy ! Total flux subtracted in 200 components = 0.0500547 Jy ! Clean residual min=-0.002861 max=0.002578 Jy/beam ! Clean residual mean=-0.000001 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.601272 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.601272 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.142 mas, bmaj=4.151 mas, bpa=-0.07571 degrees ! Estimated noise=0.457887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045543 Jy ! Component: 100 - total flux cleaned = 0.00747891 Jy ! Component: 150 - total flux cleaned = 0.00968733 Jy ! Component: 200 - total flux cleaned = 0.0114049 Jy ! Total flux subtracted in 200 components = 0.0114049 Jy ! Clean residual min=-0.001807 max=0.001868 Jy/beam ! Clean residual mean=-0.000003 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.612677 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105305 Jy ! Component: 100 - total flux cleaned = 0.00201753 Jy ! Component: 150 - total flux cleaned = 0.00283454 Jy ! Component: 200 - total flux cleaned = 0.00353036 Jy ! Total flux subtracted in 200 components = 0.00353036 Jy ! Clean residual min=-0.001252 max=0.001264 Jy/beam ! Clean residual mean=-0.000003 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.616207 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 97 components and 0.616207 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.801 mas, bmaj=2.172 mas, bpa=-1.43 degrees ! Estimated noise=0.343569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131502 Jy ! Component: 100 - total flux cleaned = -0.000140953 Jy ! Component: 150 - total flux cleaned = 0.000247516 Jy ! Component: 200 - total flux cleaned = 0.000646029 Jy ! Total flux subtracted in 200 components = 0.000646029 Jy ! Clean residual min=-0.001364 max=0.001285 Jy/beam ! Clean residual mean=-0.000002 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.616853 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 119 components and 0.616853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020911Jy sigma=0.703557 ! Fit after self-cal, rms=0.020867Jy sigma=0.702315 wmodel J1354-0206_X_map.mod ! Writing 119 model components to file: J1354-0206_X_map.mod wobs J1354-0206_X_uvs.fits ! Writing UV FITS file: J1354-0206_X_uvs.fits wwins J1354-0206_X_map.win ! wwins: Wrote 7 windows to J1354-0206_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.89127e-05 Jy ! Component: 100 - total flux cleaned = 0.000116049 Jy ! Component: 150 - total flux cleaned = 0.000137732 Jy ! Component: 200 - total flux cleaned = 0.000117822 Jy ! Component: 250 - total flux cleaned = 9.85086e-05 Jy ! Component: 300 - total flux cleaned = 0.000136022 Jy ! Component: 350 - total flux cleaned = 0.000226127 Jy ! Component: 400 - total flux cleaned = 0.000278221 Jy ! Component: 450 - total flux cleaned = 0.000363123 Jy ! Component: 500 - total flux cleaned = 0.000429479 Jy ! Component: 550 - total flux cleaned = 0.000558532 Jy ! Component: 600 - total flux cleaned = 0.000652668 Jy ! Component: 650 - total flux cleaned = 0.000760501 Jy ! Component: 700 - total flux cleaned = 0.000896145 Jy ! Component: 750 - total flux cleaned = 0.00101397 Jy ! Component: 800 - total flux cleaned = 0.00110065 Jy ! Component: 850 - total flux cleaned = 0.00121404 Jy ! Component: 900 - total flux cleaned = 0.00126962 Jy ! Component: 950 - total flux cleaned = 0.0013657 Jy ! Component: 1000 - total flux cleaned = 0.00143311 Jy ! Component: 1050 - total flux cleaned = 0.00151272 Jy ! Component: 1100 - total flux cleaned = 0.00156486 Jy ! Component: 1150 - total flux cleaned = 0.0016547 Jy ! Component: 1200 - total flux cleaned = 0.00171776 Jy ! Component: 1250 - total flux cleaned = 0.00176754 Jy ! Component: 1300 - total flux cleaned = 0.001841 Jy ! Component: 1350 - total flux cleaned = 0.00194941 Jy ! Component: 1400 - total flux cleaned = 0.00203247 Jy ! Component: 1450 - total flux cleaned = 0.00212595 Jy ! Component: 1500 - total flux cleaned = 0.00218375 Jy ! Component: 1550 - total flux cleaned = 0.00220669 Jy ! Component: 1600 - total flux cleaned = 0.00229692 Jy ! Component: 1650 - total flux cleaned = 0.00236357 Jy ! Component: 1700 - total flux cleaned = 0.00244035 Jy ! Component: 1750 - total flux cleaned = 0.00253798 Jy ! Component: 1800 - total flux cleaned = 0.00262363 Jy ! Component: 1850 - total flux cleaned = 0.00269791 Jy ! Component: 1900 - total flux cleaned = 0.00280261 Jy ! Component: 1950 - total flux cleaned = 0.00287504 Jy ! Component: 2000 - total flux cleaned = 0.00296699 Jy ! Component: 2050 - total flux cleaned = 0.00303767 Jy ! Component: 2100 - total flux cleaned = 0.00307774 Jy ! Component: 2150 - total flux cleaned = 0.00314705 Jy ! Component: 2200 - total flux cleaned = 0.00318625 Jy ! Component: 2250 - total flux cleaned = 0.00327362 Jy ! Component: 2300 - total flux cleaned = 0.00330243 Jy ! Component: 2350 - total flux cleaned = 0.00335958 Jy ! Component: 2400 - total flux cleaned = 0.00343491 Jy ! Component: 2450 - total flux cleaned = 0.00350006 Jy ! Component: 2500 - total flux cleaned = 0.00355558 Jy ! Component: 2550 - total flux cleaned = 0.00361966 Jy ! Component: 2600 - total flux cleaned = 0.00369219 Jy ! Component: 2650 - total flux cleaned = 0.00373709 Jy ! Component: 2700 - total flux cleaned = 0.00380836 Jy ! Component: 2750 - total flux cleaned = 0.0038966 Jy ! Component: 2800 - total flux cleaned = 0.00396658 Jy ! Component: 2850 - total flux cleaned = 0.00403592 Jy ! Component: 2900 - total flux cleaned = 0.00407025 Jy ! Component: 2950 - total flux cleaned = 0.0041384 Jy ! Component: 3000 - total flux cleaned = 0.00419747 Jy ! Component: 3050 - total flux cleaned = 0.00423093 Jy ! Component: 3100 - total flux cleaned = 0.00430586 Jy ! Component: 3150 - total flux cleaned = 0.00438832 Jy ! Component: 3200 - total flux cleaned = 0.00442915 Jy ! Component: 3250 - total flux cleaned = 0.00448597 Jy ! Component: 3300 - total flux cleaned = 0.00455851 Jy ! Component: 3350 - total flux cleaned = 0.0045985 Jy ! Component: 3400 - total flux cleaned = 0.00466194 Jy ! Component: 3450 - total flux cleaned = 0.00471705 Jy ! Component: 3500 - total flux cleaned = 0.00474839 Jy ! Component: 3550 - total flux cleaned = 0.00481047 Jy ! Component: 3600 - total flux cleaned = 0.00486446 Jy ! Component: 3650 - total flux cleaned = 0.0049104 Jy ! Component: 3700 - total flux cleaned = 0.00493319 Jy ! Component: 3750 - total flux cleaned = 0.0049935 Jy ! Component: 3800 - total flux cleaned = 0.00506844 Jy ! Component: 3850 - total flux cleaned = 0.00506843 Jy ! Component: 3900 - total flux cleaned = 0.00512763 Jy ! Component: 3950 - total flux cleaned = 0.00515696 Jy ! Component: 4000 - total flux cleaned = 0.0052153 Jy ! Component: 4050 - total flux cleaned = 0.00523698 Jy ! Total flux subtracted in 4096 components = 0.00527296 Jy ! Clean residual min=-0.000407 max=0.000432 Jy/beam ! Clean residual mean=-0.000001 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.622126 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 401 components and 0.622126 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J1354-0206_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.801 x 2.172 at -1.43 degrees (North through East) ! Clean map min=-0.0008663 max=0.5127 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1354-0206_X_map.fits wmodel /vlbi/sb072/temp_maps//J1354-0206_X_map.mod ! Writing 401 model components to file: /vlbi/sb072/temp_maps//J1354-0206_X_map.mod wobs /vlbi/sb072/temp_maps//J1354-0206_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J1354-0206_X_uvs.fits wwins /vlbi/sb072/temp_maps//J1354-0206_X_map.win ! wwins: Wrote 8 windows to /vlbi/sb072/temp_maps//J1354-0206_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.512698 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00012321 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0720951 0.0720951 0.14419 0.28838 0.576761 1.15352 2.30704 4.61409 9.22817 18.4563 36.9127 73.8254 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.512 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4161.17 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J1354-0206_X_dfm.log closed on Tue Mar 5 23:10:32 2019