! Started logfile: /vlbi/sb072/temp_maps//J1239-1023_C_dfm.log on Tue Mar  5 23:08:40 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/sb072/temp_maps//J1239-1023_C_uva.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J1239-1023_C_uva.fits
! AN table 1: 4 integrations on 3 of 3 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1239-1023
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 96 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1239-1023_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.113073Jy  sigma=47.066258
! Fit after  self-cal, rms=0.470896Jy  sigma=18.833635
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.785 mas, bmaj=5.164 mas, bpa=22.44 degrees
! Estimated noise=2.34507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.327699 Jy
! Component: 100  -  total flux cleaned = 0.322624 Jy
! Total flux subtracted in 100 components = 0.322624 Jy
! Clean residual min=-0.057773 max=0.057412 Jy/beam
! Clean residual mean=0.000001 rms=0.021547 Jy/beam
! Combined flux in latest and established models = 0.322624 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.322624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.113358Jy  sigma=4.770933
! Fit after  self-cal, rms=0.113309Jy  sigma=4.768772
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.951 mas, bmaj=4.771 mas, bpa=22.78 degrees
! Estimated noise=1.76438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244677 Jy
! Component: 100  -  total flux cleaned = 0.0243497 Jy
! Component: 150  -  total flux cleaned = 0.0333649 Jy
! Component: 200  -  total flux cleaned = 0.0277404 Jy
! Total flux subtracted in 200 components = 0.0277404 Jy
! Clean residual min=-0.015286 max=0.015073 Jy/beam
! Clean residual mean=-0.000005 rms=0.006980 Jy/beam
! Combined flux in latest and established models = 0.350365 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 74 components and 0.350365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029691Jy  sigma=1.206827
! Fit after  self-cal, rms=0.029452Jy  sigma=1.196412
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.951 x 4.771 at 22.78 degrees (North through East)
! Clean map  min=-0.099175  max=0.44915 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    NL        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.029452Jy  sigma=1.196412
! Fit after  self-cal, rms=0.000000Jy  sigma=-nan
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! There are no unflagged visibilities to be inverted.
! Error occurred in function: imstat().
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/sb072/temp_maps//J1239-1023_C_map.fits
! Inverting map and beam 
! There are no unflagged visibilities to be inverted.
! Error occured in command: wmap
! 
wmodel /vlbi/sb072/temp_maps//J1239-1023_C_map.mod
! Writing 74 model components to file: /vlbi/sb072/temp_maps//J1239-1023_C_map.mod
wobs   /vlbi/sb072/temp_maps//J1239-1023_C_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J1239-1023_C_uvs.fits
wwins  /vlbi/sb072/temp_maps//J1239-1023_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
! Inverting map and beam 
! There are no unflagged visibilities to be inverted.
! Error occurred in function: peak().
! 
print "The peak flux is", peak_flux
! The peak flux is 0 
invert
! Inverting map and beam 
! There are no unflagged visibilities to be inverted.
! Error occured in command: invert
! 
float image_rms
image_rms = imstat(rms)
! Inverting map and beam 
! There are no unflagged visibilities to be inverted.
! Error occurred in function: imstat().
! 
print "The final image rms is",image_rms
! The final image rms is 0 
loglevs 100*3*image_rms/peak_flux
! Division by zero error.
! 
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! Division by zero error.
! 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J1239-1023_C_dfm.log closed on Tue Mar  5 23:08:41 2019