! Started logfile: /vlbi/sb072/temp_maps//J1122-2532_X_dfm.log on Thu Jan 31 09:32:49 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/sb072/temp_maps//J1122-2532_X_uvm.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J1122-2532_X_uvm.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! AN table 2: 18 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.883333 visibilities/baseline/integration-bin.
! Found source: J1122-2532
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 5088 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1122-2532_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.011317Jy  sigma=29.557711
! Fit after  self-cal, rms=0.894420Jy  sigma=26.061206
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.71 mas, bmaj=1.866 mas, bpa=3.28 degrees
! Estimated noise=0.560756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0709209 Jy
! Component: 100  -  total flux cleaned = 0.105556 Jy
! Total flux subtracted in 100 components = 0.105556 Jy
! Clean residual min=-0.007859 max=0.017400 Jy/beam
! Clean residual mean=-0.000002 rms=0.001724 Jy/beam
! Combined flux in latest and established models = 0.105556 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.105556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073708Jy  sigma=1.664336
! Fit after  self-cal, rms=0.071915Jy  sigma=1.607171
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238552 Jy
! Component: 100  -  total flux cleaned = 0.0379715 Jy
! Total flux subtracted in 100 components = 0.0379715 Jy
! Clean residual min=-0.005386 max=0.007160 Jy/beam
! Clean residual mean=-0.000002 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.143527 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 10 components and 0.143527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059860Jy  sigma=1.101759
! Fit after  self-cal, rms=0.059756Jy  sigma=1.099395
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0086901 Jy
! Component: 100  -  total flux cleaned = 0.0133367 Jy
! Total flux subtracted in 100 components = 0.0133367 Jy
! Clean residual min=-0.004801 max=0.004734 Jy/beam
! Clean residual mean=-0.000002 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.156864 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 12 components and 0.156864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057832Jy  sigma=1.016697
! Fit after  self-cal, rms=0.057815Jy  sigma=1.016452
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9202 mas, bmaj=2.343 mas, bpa=3.965 degrees
! Estimated noise=0.38356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407071 Jy
! Component: 100  -  total flux cleaned = 0.00444404 Jy
! Component: 150  -  total flux cleaned = 0.00465819 Jy
! Component: 200  -  total flux cleaned = 0.00475418 Jy
! Total flux subtracted in 200 components = 0.00475418 Jy
! Clean residual min=-0.004503 max=0.005218 Jy/beam
! Clean residual mean=-0.000003 rms=0.001227 Jy/beam
! Combined flux in latest and established models = 0.161618 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.161618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057191Jy  sigma=0.995255
! Fit after  self-cal, rms=0.057180Jy  sigma=0.995062
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9202 x 2.343 at 3.965 degrees (North through East)
! Clean map  min=-0.0043855  max=0.10434 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.45     KP        1.10     
!   LA        1.00*    NL        1.08     OV        1.13     PT        1.24     
!   SC        0.83     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     HN        0.89     KP        0.90     LA        0.96     
!   MK        1.01     NL        1.09     OV        1.01     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.09     HN        1.23     KP        1.03     
!   LA        1.00*    NL        1.08     OV        1.14     PT        1.25     
!   SC        0.77     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     HN        0.86     KP        0.90     LA        0.95     
!   MK        0.96     NL        1.09     OV        1.02     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.08     HN        1.35     KP        1.02     
!   LA        1.00*    NL        1.08     OV        1.17     PT        1.24     
!   SC        0.82     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     HN        0.86     KP        0.93     LA        0.97     
!   MK        0.96     NL        1.08     OV        1.03     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.34     KP        1.06     
!   LA        1.00*    NL        1.06     OV        1.13     PT        1.22     
!   SC        0.82     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     HN        0.86     KP        0.90     LA        0.96     
!   MK        0.96     NL        1.06     OV        1.02     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.45     KP        0.98     
!   LA        1.00*    NL        1.03     OV        1.14     PT        1.27     
!   SC        0.79     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.89     HN        0.84     KP        0.89     LA        0.97     
!   MK        1.00     NL        1.08     OV        1.00     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        1.47     KP        0.98     
!   LA        1.00*    NL        1.01     OV        1.12     PT        1.21     
!   SC        0.84     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     HN        0.81     KP        0.93     LA        0.94     
!   MK        0.91     NL        1.13     OV        1.03     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.28     KP        1.04     
!   LA        1.00*    NL        0.99     OV        1.12     PT        1.27     
!   SC        0.82     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     HN        0.82     KP        0.92     LA        0.91     
!   MK        1.01     NL        1.11     OV        1.01     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.47     KP        1.03     
!   LA        1.00*    NL        1.06     OV        1.10     PT        1.24     
!   SC        0.82     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     HN        0.86     KP        0.90     LA        0.93     
!   MK        0.97     NL        1.06     OV        1.02     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.057180Jy  sigma=0.995062
! Fit after  self-cal, rms=0.054210Jy  sigma=0.828530
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.904 mas, bmaj=2.287 mas, bpa=4.044 degrees
! Estimated noise=0.370667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181027 Jy
! Component: 100  -  total flux cleaned = 0.00176263 Jy
! Component: 150  -  total flux cleaned = 0.00155586 Jy
! Component: 200  -  total flux cleaned = 0.00150995 Jy
! Total flux subtracted in 200 components = 0.00150995 Jy
! Clean residual min=-0.001996 max=0.002532 Jy/beam
! Clean residual mean=-0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.163128 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.163128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054045Jy  sigma=0.820477
! Fit after  self-cal, rms=0.054121Jy  sigma=0.819439
! Inverting map 
! Added new window around map position (6.4, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244605 Jy
! Component: 100  -  total flux cleaned = 0.00383051 Jy
! Component: 150  -  total flux cleaned = 0.0044686 Jy
! Component: 200  -  total flux cleaned = 0.00457615 Jy
! Total flux subtracted in 200 components = 0.00457615 Jy
! Clean residual min=-0.001670 max=0.001694 Jy/beam
! Clean residual mean=-0.000000 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.167704 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 52 components and 0.167704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053937Jy  sigma=0.813774
! Fit after  self-cal, rms=0.053922Jy  sigma=0.813391
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053922Jy  sigma=0.813391
! Fit after  self-cal, rms=0.053186Jy  sigma=0.803411
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9012 mas, bmaj=2.285 mas, bpa=3.843 degrees
! Estimated noise=0.369397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010444 Jy
! Component: 100  -  total flux cleaned = 0.00148104 Jy
! Component: 150  -  total flux cleaned = 0.00167422 Jy
! Component: 200  -  total flux cleaned = 0.0017603 Jy
! Total flux subtracted in 200 components = 0.0017603 Jy
! Clean residual min=-0.001476 max=0.001361 Jy/beam
! Clean residual mean=-0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.169464 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.169464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053155Jy  sigma=0.802007
! Fit after  self-cal, rms=0.053141Jy  sigma=0.801832
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251889 Jy
! Component: 100  -  total flux cleaned = 0.000314113 Jy
! Component: 150  -  total flux cleaned = 0.000352694 Jy
! Component: 200  -  total flux cleaned = 0.000388667 Jy
! Total flux subtracted in 200 components = 0.000388667 Jy
! Clean residual min=-0.001431 max=0.001336 Jy/beam
! Clean residual mean=-0.000000 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.169853 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 83 components and 0.169853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053127Jy  sigma=0.801207
! Fit after  self-cal, rms=0.053125Jy  sigma=0.801169
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053125Jy  sigma=0.801169
! Fit after  self-cal, rms=0.052545Jy  sigma=0.794328
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9013 mas, bmaj=2.284 mas, bpa=3.791 degrees
! Estimated noise=0.369879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000641532 Jy
! Component: 100  -  total flux cleaned = 0.000915235 Jy
! Component: 150  -  total flux cleaned = 0.00100857 Jy
! Component: 200  -  total flux cleaned = 0.00107787 Jy
! Total flux subtracted in 200 components = 0.00107787 Jy
! Clean residual min=-0.001224 max=0.001252 Jy/beam
! Clean residual mean=0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.170931 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.170931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052524Jy  sigma=0.793728
! Fit after  self-cal, rms=0.052514Jy  sigma=0.793665
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021985 Jy
! Component: 100  -  total flux cleaned = 0.000268529 Jy
! Component: 150  -  total flux cleaned = 0.000313703 Jy
! Component: 200  -  total flux cleaned = 0.000313581 Jy
! Total flux subtracted in 200 components = 0.000313581 Jy
! Clean residual min=-0.001203 max=0.001258 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.171245 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.171245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052503Jy  sigma=0.793321
! Fit after  self-cal, rms=0.052502Jy  sigma=0.793303
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052502Jy  sigma=0.793303
! Fit after  self-cal, rms=0.052539Jy  sigma=0.792522
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=4.636 mas, bpa=4.052 degrees
! Estimated noise=0.475679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00051807 Jy
! Component: 100  -  total flux cleaned = 0.00066968 Jy
! Component: 150  -  total flux cleaned = 0.000683544 Jy
! Component: 200  -  total flux cleaned = 0.00068357 Jy
! Total flux subtracted in 200 components = 0.00068357 Jy
! Clean residual min=-0.001405 max=0.001587 Jy/beam
! Clean residual mean=-0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.171928 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.171928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052528Jy  sigma=0.792377
! Fit after  self-cal, rms=0.052524Jy  sigma=0.792343
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.60695e-05 Jy
! Component: 100  -  total flux cleaned = 8.64056e-05 Jy
! Component: 150  -  total flux cleaned = 4.43296e-05 Jy
! Component: 200  -  total flux cleaned = 2.49099e-05 Jy
! Total flux subtracted in 200 components = 2.49099e-05 Jy
! Clean residual min=-0.001384 max=0.001580 Jy/beam
! Clean residual mean=-0.000000 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.171953 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 117 components and 0.171953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052521Jy  sigma=0.792349
! Fit after  self-cal, rms=0.052520Jy  sigma=0.792335
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9011 mas, bmaj=2.284 mas, bpa=3.736 degrees
! Estimated noise=0.370631 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9011 x 2.284 at 3.736 degrees (North through East)
! Clean map  min=-0.0013608  max=0.10131 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7019 mas, bmaj=1.846 mas, bpa=3.2 degrees
! Estimated noise=0.531421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0700558 Jy
! Component: 100  -  total flux cleaned = 0.106251 Jy
! Component: 150  -  total flux cleaned = 0.128031 Jy
! Component: 200  -  total flux cleaned = 0.141385 Jy
! Total flux subtracted in 200 components = 0.141385 Jy
! Clean residual min=-0.003482 max=0.006822 Jy/beam
! Clean residual mean=-0.000001 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.141385 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.141385 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9011 mas, bmaj=2.284 mas, bpa=3.736 degrees
! Estimated noise=0.370631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123324 Jy
! Component: 100  -  total flux cleaned = 0.0184415 Jy
! Component: 150  -  total flux cleaned = 0.0221925 Jy
! Component: 200  -  total flux cleaned = 0.0249283 Jy
! Total flux subtracted in 200 components = 0.0249283 Jy
! Clean residual min=-0.001518 max=0.001819 Jy/beam
! Clean residual mean=-0.000000 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.166313 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 30 components and 0.166313 Jy
! Inverting map 
! Added new window around map position (0, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210905 Jy
! Component: 100  -  total flux cleaned = 0.00341864 Jy
! Component: 150  -  total flux cleaned = 0.00411909 Jy
! Component: 200  -  total flux cleaned = 0.00440403 Jy
! Total flux subtracted in 200 components = 0.00440403 Jy
! Clean residual min=-0.001287 max=0.001398 Jy/beam
! Clean residual mean=0.000000 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.170717 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 49 components and 0.170717 Jy
! Inverting map 
! Added new window around map position (16.8, -11.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050841 Jy
! Component: 100  -  total flux cleaned = 0.000631878 Jy
! Component: 150  -  total flux cleaned = 0.00078281 Jy
! Component: 200  -  total flux cleaned = 0.000990259 Jy
! Total flux subtracted in 200 components = 0.000990259 Jy
! Clean residual min=-0.001220 max=0.001303 Jy/beam
! Clean residual mean=0.000000 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.171707 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 64 components and 0.171707 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=4.636 mas, bpa=4.052 degrees
! Estimated noise=0.475679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355953 Jy
! Component: 100  -  total flux cleaned = 0.000298532 Jy
! Component: 150  -  total flux cleaned = 0.000323636 Jy
! Component: 200  -  total flux cleaned = 0.000366012 Jy
! Total flux subtracted in 200 components = 0.000366012 Jy
! Clean residual min=-0.001364 max=0.001599 Jy/beam
! Clean residual mean=0.000000 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.172073 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00084107 Jy
! Component: 100  -  total flux cleaned = 0.000907186 Jy
! Component: 150  -  total flux cleaned = 0.000982703 Jy
! Component: 200  -  total flux cleaned = 0.000981294 Jy
! Total flux subtracted in 200 components = 0.000981294 Jy
! Clean residual min=-0.001273 max=0.001455 Jy/beam
! Clean residual mean=0.000000 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.173055 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 102 components and 0.173055 Jy
! Inverting map 
! Added new window around map position (-30, -44.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00077822 Jy
! Component: 100  -  total flux cleaned = 0.000984871 Jy
! Component: 150  -  total flux cleaned = 0.00110662 Jy
! Component: 200  -  total flux cleaned = 0.00117449 Jy
! Total flux subtracted in 200 components = 0.00117449 Jy
! Clean residual min=-0.001141 max=0.001066 Jy/beam
! Clean residual mean=-0.000000 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.174229 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.174229 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9011 mas, bmaj=2.284 mas, bpa=3.736 degrees
! Estimated noise=0.370631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000535145 Jy
! Component: 100  -  total flux cleaned = -0.000499676 Jy
! Component: 150  -  total flux cleaned = -0.000431919 Jy
! Component: 200  -  total flux cleaned = -0.000431048 Jy
! Total flux subtracted in 200 components = -0.000431048 Jy
! Clean residual min=-0.001095 max=0.001143 Jy/beam
! Clean residual mean=0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.173798 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 155 components and 0.173798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052432Jy  sigma=0.790227
! Fit after  self-cal, rms=0.052408Jy  sigma=0.789703
wmodel J1122-2532_X_map.mod
! Writing 155 model components to file: J1122-2532_X_map.mod
wobs   J1122-2532_X_uvs.fits
! Writing UV FITS file: J1122-2532_X_uvs.fits
wwins  J1122-2532_X_map.win
! wwins: Wrote 7 windows to J1122-2532_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143686 Jy
! Component: 100  -  total flux cleaned = 4.94232e-05 Jy
! Component: 150  -  total flux cleaned = -2.38859e-05 Jy
! Component: 200  -  total flux cleaned = 2.94858e-05 Jy
! Component: 250  -  total flux cleaned = 1.21185e-05 Jy
! Component: 300  -  total flux cleaned = 9.72503e-05 Jy
! Component: 350  -  total flux cleaned = 0.000130531 Jy
! Component: 400  -  total flux cleaned = 9.77235e-05 Jy
! Component: 450  -  total flux cleaned = 0.000130123 Jy
! Component: 500  -  total flux cleaned = 9.80004e-05 Jy
! Component: 550  -  total flux cleaned = 6.60873e-05 Jy
! Component: 600  -  total flux cleaned = 5.03215e-05 Jy
! Component: 650  -  total flux cleaned = -2.66792e-05 Jy
! Component: 700  -  total flux cleaned = -2.67612e-05 Jy
! Component: 750  -  total flux cleaned = -8.72782e-05 Jy
! Component: 800  -  total flux cleaned = -0.000177066 Jy
! Component: 850  -  total flux cleaned = -0.000251077 Jy
! Component: 900  -  total flux cleaned = -0.000324356 Jy
! Component: 950  -  total flux cleaned = -0.000397096 Jy
! Component: 1000  -  total flux cleaned = -0.000411387 Jy
! Component: 1050  -  total flux cleaned = -0.000468304 Jy
! Component: 1100  -  total flux cleaned = -0.000482452 Jy
! Component: 1150  -  total flux cleaned = -0.000538766 Jy
! Component: 1200  -  total flux cleaned = -0.000594482 Jy
! Component: 1250  -  total flux cleaned = -0.000621991 Jy
! Component: 1300  -  total flux cleaned = -0.000635743 Jy
! Component: 1350  -  total flux cleaned = -0.000662992 Jy
! Component: 1400  -  total flux cleaned = -0.000703546 Jy
! Component: 1450  -  total flux cleaned = -0.000730254 Jy
! Component: 1500  -  total flux cleaned = -0.000783355 Jy
! Component: 1550  -  total flux cleaned = -0.000743788 Jy
! Component: 1600  -  total flux cleaned = -0.000756973 Jy
! Component: 1650  -  total flux cleaned = -0.000782998 Jy
! Component: 1700  -  total flux cleaned = -0.000770234 Jy
! Component: 1750  -  total flux cleaned = -0.000821645 Jy
! Component: 1800  -  total flux cleaned = -0.000859776 Jy
! Component: 1850  -  total flux cleaned = -0.000821816 Jy
! Component: 1900  -  total flux cleaned = -0.000834538 Jy
! Component: 1950  -  total flux cleaned = -0.000834591 Jy
! Component: 2000  -  total flux cleaned = -0.000834605 Jy
! Component: 2050  -  total flux cleaned = -0.000797574 Jy
! Component: 2100  -  total flux cleaned = -0.000773132 Jy
! Component: 2150  -  total flux cleaned = -0.000773132 Jy
! Component: 2200  -  total flux cleaned = -0.000797364 Jy
! Component: 2250  -  total flux cleaned = -0.000785386 Jy
! Component: 2300  -  total flux cleaned = -0.000749566 Jy
! Component: 2350  -  total flux cleaned = -0.00073766 Jy
! Component: 2400  -  total flux cleaned = -0.000761364 Jy
! Component: 2450  -  total flux cleaned = -0.000761407 Jy
! Component: 2500  -  total flux cleaned = -0.000761377 Jy
! Component: 2550  -  total flux cleaned = -0.000773066 Jy
! Component: 2600  -  total flux cleaned = -0.000796208 Jy
! Component: 2650  -  total flux cleaned = -0.00080778 Jy
! Component: 2700  -  total flux cleaned = -0.000796302 Jy
! Component: 2750  -  total flux cleaned = -0.000785014 Jy
! Component: 2800  -  total flux cleaned = -0.000819104 Jy
! Component: 2850  -  total flux cleaned = -0.000785235 Jy
! Component: 2900  -  total flux cleaned = -0.000796461 Jy
! Component: 2950  -  total flux cleaned = -0.000818837 Jy
! Component: 3000  -  total flux cleaned = -0.000829949 Jy
! Component: 3050  -  total flux cleaned = -0.000763549 Jy
! Component: 3100  -  total flux cleaned = -0.000752621 Jy
! Component: 3150  -  total flux cleaned = -0.000763581 Jy
! Component: 3200  -  total flux cleaned = -0.000774428 Jy
! Component: 3250  -  total flux cleaned = -0.000774337 Jy
! Component: 3300  -  total flux cleaned = -0.000741924 Jy
! Component: 3350  -  total flux cleaned = -0.000709696 Jy
! Component: 3400  -  total flux cleaned = -0.000709773 Jy
! Component: 3450  -  total flux cleaned = -0.000720446 Jy
! Component: 3500  -  total flux cleaned = -0.000731063 Jy
! Component: 3550  -  total flux cleaned = -0.000752153 Jy
! Component: 3600  -  total flux cleaned = -0.000752178 Jy
! Component: 3650  -  total flux cleaned = -0.000762617 Jy
! Component: 3700  -  total flux cleaned = -0.00077299 Jy
! Component: 3750  -  total flux cleaned = -0.000804052 Jy
! Component: 3800  -  total flux cleaned = -0.000762763 Jy
! Component: 3850  -  total flux cleaned = -0.000762791 Jy
! Component: 3900  -  total flux cleaned = -0.000762791 Jy
! Component: 3950  -  total flux cleaned = -0.000732273 Jy
! Component: 4000  -  total flux cleaned = -0.000742426 Jy
! Component: 4050  -  total flux cleaned = -0.000742467 Jy
! Total flux subtracted in 4096 components = -0.000742488 Jy
! Clean residual min=-0.000575 max=0.000787 Jy/beam
! Clean residual mean=0.000000 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.173055 Jy
keep
! Adding 317 model components to the UV plane model.
! The established model now contains 472 components and 0.173056 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/sb072/temp_maps//J1122-2532_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9011 x 2.284 at 3.736 degrees (North through East)
! Clean map  min=-0.0011389  max=0.099783 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1122-2532_X_map.fits
wmodel /vlbi/sb072/temp_maps//J1122-2532_X_map.mod
! Writing 472 model components to file: /vlbi/sb072/temp_maps//J1122-2532_X_map.mod
wobs   /vlbi/sb072/temp_maps//J1122-2532_X_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J1122-2532_X_uvs.fits
wwins  /vlbi/sb072/temp_maps//J1122-2532_X_map.win
! wwins: Wrote 8 windows to /vlbi/sb072/temp_maps//J1122-2532_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0997834 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000181966 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.547084 0.547084 1.09417 2.18834 4.37667 8.75334 17.5067 35.0134 70.0267
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.099 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  548.361 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J1122-2532_X_dfm.log closed on Thu Jan 31 09:32:53 2019