! Started logfile: /vlbi/sb072/temp_maps//J1120-2508_X_dfm.log on Thu Jan 31 09:32:38 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/sb072/temp_maps//J1120-2508_X_uvm.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J1120-2508_X_uvm.fits
! AN table 1: 23 integrations on 15 of 15 possible baselines.
! AN table 2: 69 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.90628 visibilities/baseline/integration-bin.
! Found source: J1120-2508
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 7504 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1120-2508_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 23 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000751Jy  sigma=35.781112
! Fit after  self-cal, rms=0.984456Jy  sigma=35.226494
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.903 mas, bmaj=4.051 mas, bpa=-24.22 degrees
! Estimated noise=0.626381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00879064 Jy
! Component: 100  -  total flux cleaned = 0.0135078 Jy
! Total flux subtracted in 100 components = 0.0135078 Jy
! Clean residual min=-0.002778 max=0.002909 Jy/beam
! Clean residual mean=0.000003 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.0135078 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0135078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025872Jy  sigma=0.872913
! Fit after  self-cal, rms=0.024663Jy  sigma=0.826765
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.33 mas, bmaj=4.502 mas, bpa=-22.19 degrees
! Estimated noise=0.247051 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00799036 Jy
! Component: 100  -  total flux cleaned = 0.0123882 Jy
! Component: 150  -  total flux cleaned = 0.0151981 Jy
! Component: 200  -  total flux cleaned = 0.0171056 Jy
! Total flux subtracted in 200 components = 0.0171056 Jy
! Clean residual min=-0.003309 max=0.004316 Jy/beam
! Clean residual mean=-0.000001 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.0306134 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 89 components and 0.0306134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021770Jy  sigma=0.725153
! Fit after  self-cal, rms=0.021716Jy  sigma=0.723090
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.33 x 4.502 at -22.19 degrees (North through East)
! Clean map  min=-0.0033387  max=0.011804 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.18     KP        0.72     LA        1.00*    
!   OV        1.06     PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     KP        0.87     LA        1.34     MK        0.93     
!   OV        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.13     KP        0.71     LA        1.00*    
!   OV        1.00     PT        1.13     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     KP        0.95     LA        1.21     MK        1.02     
!   OV        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.11     KP        0.65     LA        1.00*    
!   OV        1.07     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     KP        1.02     LA        1.13     MK        1.12     
!   OV        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        1.84     KP        0.58     LA        1.00*    
!   OV        1.06     PT        1.26     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     KP        0.91     LA        1.23     MK        0.84     
!   OV        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.19     KP        0.52     LA        1.00*    
!   OV        1.21     PT        1.23     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.28     KP        0.79     LA        1.36     MK        1.17     
!   OV        0.87     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        1.02     KP        0.68     LA        1.00*    
!   OV        1.14     PT        1.27     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.24     KP        0.80     LA        1.27     MK        1.05     
!   OV        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     KP        0.62     LA        1.00*    
!   OV        1.14     PT        1.18     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.22     KP        0.80     LA        1.33     MK        0.91     
!   OV        0.84     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.02     KP        0.79     LA        1.00*    
!   OV        1.24     PT        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.17     KP        0.87     LA        1.24     MK        0.99     
!   OV        0.81     
! 
! 
! Fit before self-cal, rms=0.021716Jy  sigma=0.723090
! Fit after  self-cal, rms=0.021056Jy  sigma=0.699473
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.358 mas, bmaj=4.512 mas, bpa=-22.24 degrees
! Estimated noise=0.242759 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107112 Jy
! Component: 100  -  total flux cleaned = 0.00130664 Jy
! Component: 150  -  total flux cleaned = 0.00146946 Jy
! Component: 200  -  total flux cleaned = 0.00162747 Jy
! Total flux subtracted in 200 components = 0.00162747 Jy
! Clean residual min=-0.003318 max=0.003620 Jy/beam
! Clean residual mean=-0.000003 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.0322409 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 99 components and 0.0322409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020902Jy  sigma=0.693673
! Fit after  self-cal, rms=0.021215Jy  sigma=0.688303
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021215Jy  sigma=0.688303
! Fit after  self-cal, rms=0.025226Jy  sigma=0.669358
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.422 mas, bmaj=4.363 mas, bpa=-22.13 degrees
! Estimated noise=0.241783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000698643 Jy
! Component: 100  -  total flux cleaned = 0.000866535 Jy
! Component: 150  -  total flux cleaned = 0.000984555 Jy
! Component: 200  -  total flux cleaned = 0.00109153 Jy
! Total flux subtracted in 200 components = 0.00109153 Jy
! Clean residual min=-0.002464 max=0.002722 Jy/beam
! Clean residual mean=0.000000 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.0333324 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 103 components and 0.0333324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025137Jy  sigma=0.665225
! Fit after  self-cal, rms=0.025524Jy  sigma=0.662637
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120909 Jy
! Component: 100  -  total flux cleaned = 0.000234052 Jy
! Component: 150  -  total flux cleaned = 0.000318466 Jy
! Component: 200  -  total flux cleaned = 0.000420956 Jy
! Total flux subtracted in 200 components = 0.000420956 Jy
! Clean residual min=-0.002341 max=0.002572 Jy/beam
! Clean residual mean=0.000000 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.0337534 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 114 components and 0.0337534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025479Jy  sigma=0.661199
! Fit after  self-cal, rms=0.025463Jy  sigma=0.661038
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025463Jy  sigma=0.661038
! Fit after  self-cal, rms=0.035195Jy  sigma=0.635838
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.459 mas, bmaj=4.241 mas, bpa=-21.47 degrees
! Estimated noise=0.240724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000548504 Jy
! Component: 100  -  total flux cleaned = 0.000693584 Jy
! Component: 150  -  total flux cleaned = 0.000787762 Jy
! Component: 200  -  total flux cleaned = 0.000896373 Jy
! Total flux subtracted in 200 components = 0.000896373 Jy
! Clean residual min=-0.002031 max=0.001905 Jy/beam
! Clean residual mean=0.000001 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.0346498 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 114 components and 0.0346498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035145Jy  sigma=0.634694
! Fit after  self-cal, rms=0.035703Jy  sigma=0.631890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117215 Jy
! Component: 100  -  total flux cleaned = -3.86304e-05 Jy
! Component: 150  -  total flux cleaned = 2.05725e-05 Jy
! Component: 200  -  total flux cleaned = 9.15449e-05 Jy
! Total flux subtracted in 200 components = 9.15449e-05 Jy
! Clean residual min=-0.001924 max=0.001736 Jy/beam
! Clean residual mean=0.000001 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.0347413 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 119 components and 0.0347413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035683Jy  sigma=0.631331
! Fit after  self-cal, rms=0.035670Jy  sigma=0.631211
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035670Jy  sigma=0.631211
! Fit after  self-cal, rms=0.037852Jy  sigma=0.629652
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.243 mas, bmaj=5.543 mas, bpa=13.02 degrees
! Estimated noise=0.26078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000720104 Jy
! Component: 100  -  total flux cleaned = 0.000896877 Jy
! Component: 150  -  total flux cleaned = 0.00104104 Jy
! Component: 200  -  total flux cleaned = 0.00117795 Jy
! Total flux subtracted in 200 components = 0.00117795 Jy
! Clean residual min=-0.001995 max=0.002128 Jy/beam
! Clean residual mean=0.000002 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.0359193 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 119 components and 0.0359193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037805Jy  sigma=0.629069
! Fit after  self-cal, rms=0.037996Jy  sigma=0.628257
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.31922e-05 Jy
! Component: 100  -  total flux cleaned = 8.67913e-05 Jy
! Component: 150  -  total flux cleaned = 0.000184811 Jy
! Component: 200  -  total flux cleaned = 0.000264517 Jy
! Total flux subtracted in 200 components = 0.000264517 Jy
! Clean residual min=-0.002018 max=0.002038 Jy/beam
! Clean residual mean=0.000002 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.0361838 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.0361838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037978Jy  sigma=0.628323
! Fit after  self-cal, rms=0.037946Jy  sigma=0.628140
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=4.185 mas, bpa=-21.23 degrees
! Estimated noise=0.237834 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.46 x 4.185 at -21.23 degrees (North through East)
! Clean map  min=-0.0016465  max=0.0094884 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9856 mas, bmaj=3.86 mas, bpa=-23.55 degrees
! Estimated noise=0.619035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00959554 Jy
! Component: 100  -  total flux cleaned = 0.0153951 Jy
! Component: 150  -  total flux cleaned = 0.0196593 Jy
! Component: 200  -  total flux cleaned = 0.0228442 Jy
! Total flux subtracted in 200 components = 0.0228442 Jy
! Clean residual min=-0.002205 max=0.002035 Jy/beam
! Clean residual mean=0.000002 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.0228442 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0228442 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=4.185 mas, bpa=-21.23 degrees
! Estimated noise=0.237834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419469 Jy
! Component: 100  -  total flux cleaned = 0.00668278 Jy
! Component: 150  -  total flux cleaned = 0.00838255 Jy
! Component: 200  -  total flux cleaned = 0.00959706 Jy
! Total flux subtracted in 200 components = 0.00959706 Jy
! Clean residual min=-0.002098 max=0.001816 Jy/beam
! Clean residual mean=0.000001 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.0324412 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 58 components and 0.0324413 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.243 mas, bmaj=5.543 mas, bpa=13.02 degrees
! Estimated noise=0.26078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118279 Jy
! Component: 100  -  total flux cleaned = 0.00198593 Jy
! Component: 150  -  total flux cleaned = 0.00236233 Jy
! Component: 200  -  total flux cleaned = 0.00250802 Jy
! Total flux subtracted in 200 components = 0.00250802 Jy
! Clean residual min=-0.002131 max=0.002320 Jy/beam
! Clean residual mean=0.000002 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0349493 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118222 Jy
! Component: 100  -  total flux cleaned = 0.000213888 Jy
! Component: 150  -  total flux cleaned = 0.000289481 Jy
! Component: 200  -  total flux cleaned = 0.000381129 Jy
! Total flux subtracted in 200 components = 0.000381129 Jy
! Clean residual min=-0.002097 max=0.002243 Jy/beam
! Clean residual mean=0.000002 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.0353304 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 77 components and 0.0353304 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=4.185 mas, bpa=-21.23 degrees
! Estimated noise=0.237834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.41557e-05 Jy
! Component: 100  -  total flux cleaned = 1.49456e-05 Jy
! Component: 150  -  total flux cleaned = 3.16708e-05 Jy
! Component: 200  -  total flux cleaned = 6.17522e-05 Jy
! Total flux subtracted in 200 components = 6.17522e-05 Jy
! Clean residual min=-0.001874 max=0.001702 Jy/beam
! Clean residual mean=0.000001 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.0353922 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.0353922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037974Jy  sigma=0.629138
! Fit after  self-cal, rms=0.037971Jy  sigma=0.628823
wmodel J1120-2508_X_map.mod
! Writing 92 model components to file: J1120-2508_X_map.mod
wobs   J1120-2508_X_uvs.fits
! Writing UV FITS file: J1120-2508_X_uvs.fits
wwins  J1120-2508_X_map.win
! wwins: Wrote 1 windows to J1120-2508_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237759 Jy
! Component: 100  -  total flux cleaned = 0.000699672 Jy
! Component: 150  -  total flux cleaned = 0.00107628 Jy
! Component: 200  -  total flux cleaned = 0.0014293 Jy
! Component: 250  -  total flux cleaned = 0.00176319 Jy
! Component: 300  -  total flux cleaned = 0.00210325 Jy
! Component: 350  -  total flux cleaned = 0.00238687 Jy
! Component: 400  -  total flux cleaned = 0.00257708 Jy
! Component: 450  -  total flux cleaned = 0.0027613 Jy
! Component: 500  -  total flux cleaned = 0.0029204 Jy
! Component: 550  -  total flux cleaned = 0.00309439 Jy
! Component: 600  -  total flux cleaned = 0.00324478 Jy
! Component: 650  -  total flux cleaned = 0.00337341 Jy
! Component: 700  -  total flux cleaned = 0.00349925 Jy
! Component: 750  -  total flux cleaned = 0.00358739 Jy
! Component: 800  -  total flux cleaned = 0.00367379 Jy
! Component: 850  -  total flux cleaned = 0.00375857 Jy
! Component: 900  -  total flux cleaned = 0.00389218 Jy
! Component: 950  -  total flux cleaned = 0.00399071 Jy
! Component: 1000  -  total flux cleaned = 0.00407117 Jy
! Component: 1050  -  total flux cleaned = 0.00411873 Jy
! Component: 1100  -  total flux cleaned = 0.00422786 Jy
! Component: 1150  -  total flux cleaned = 0.00425863 Jy
! Component: 1200  -  total flux cleaned = 0.00428864 Jy
! Component: 1250  -  total flux cleaned = 0.0043184 Jy
! Component: 1300  -  total flux cleaned = 0.0043626 Jy
! Component: 1350  -  total flux cleaned = 0.00439156 Jy
! Component: 1400  -  total flux cleaned = 0.00442023 Jy
! Component: 1450  -  total flux cleaned = 0.00444853 Jy
! Component: 1500  -  total flux cleaned = 0.00449055 Jy
! Component: 1550  -  total flux cleaned = 0.00458664 Jy
! Component: 1600  -  total flux cleaned = 0.00455945 Jy
! Component: 1650  -  total flux cleaned = 0.0046132 Jy
! Component: 1700  -  total flux cleaned = 0.00466595 Jy
! Component: 1750  -  total flux cleaned = 0.00469188 Jy
! Component: 1800  -  total flux cleaned = 0.00467881 Jy
! Component: 1850  -  total flux cleaned = 0.00471722 Jy
! Component: 1900  -  total flux cleaned = 0.00472996 Jy
! Component: 1950  -  total flux cleaned = 0.00477996 Jy
! Component: 2000  -  total flux cleaned = 0.00485402 Jy
! Component: 2050  -  total flux cleaned = 0.00484175 Jy
! Component: 2100  -  total flux cleaned = 0.00487823 Jy
! Component: 2150  -  total flux cleaned = 0.00492625 Jy
! Component: 2200  -  total flux cleaned = 0.00502126 Jy
! Component: 2250  -  total flux cleaned = 0.0050446 Jy
! Component: 2300  -  total flux cleaned = 0.00513754 Jy
! Component: 2350  -  total flux cleaned = 0.00517216 Jy
! Component: 2400  -  total flux cleaned = 0.00528638 Jy
! Component: 2450  -  total flux cleaned = 0.00533156 Jy
! Component: 2500  -  total flux cleaned = 0.0053877 Jy
! Component: 2550  -  total flux cleaned = 0.00544343 Jy
! Component: 2600  -  total flux cleaned = 0.00552067 Jy
! Component: 2650  -  total flux cleaned = 0.00561906 Jy
! Component: 2700  -  total flux cleaned = 0.00568419 Jy
! Component: 2750  -  total flux cleaned = 0.00574864 Jy
! Component: 2800  -  total flux cleaned = 0.00582325 Jy
! Component: 2850  -  total flux cleaned = 0.00587627 Jy
! Component: 2900  -  total flux cleaned = 0.00593924 Jy
! Component: 2950  -  total flux cleaned = 0.00602245 Jy
! Component: 3000  -  total flux cleaned = 0.00607402 Jy
! Component: 3050  -  total flux cleaned = 0.00609454 Jy
! Component: 3100  -  total flux cleaned = 0.00615561 Jy
! Component: 3150  -  total flux cleaned = 0.00621619 Jy
! Component: 3200  -  total flux cleaned = 0.00628617 Jy
! Component: 3250  -  total flux cleaned = 0.0063258 Jy
! Component: 3300  -  total flux cleaned = 0.00634554 Jy
! Component: 3350  -  total flux cleaned = 0.0063749 Jy
! Component: 3400  -  total flux cleaned = 0.00641381 Jy
! Component: 3450  -  total flux cleaned = 0.00643311 Jy
! Component: 3500  -  total flux cleaned = 0.00651967 Jy
! Component: 3550  -  total flux cleaned = 0.0065482 Jy
! Component: 3600  -  total flux cleaned = 0.00659562 Jy
! Component: 3650  -  total flux cleaned = 0.0066238 Jy
! Component: 3700  -  total flux cleaned = 0.0066239 Jy
! Component: 3750  -  total flux cleaned = 0.00667056 Jy
! Component: 3800  -  total flux cleaned = 0.0066891 Jy
! Component: 3850  -  total flux cleaned = 0.00674446 Jy
! Component: 3900  -  total flux cleaned = 0.00673526 Jy
! Component: 3950  -  total flux cleaned = 0.00679899 Jy
! Component: 4000  -  total flux cleaned = 0.00679898 Jy
! Component: 4050  -  total flux cleaned = 0.00680792 Jy
! Total flux subtracted in 4096 components = 0.00682587 Jy
! Clean residual min=-0.000484 max=0.000540 Jy/beam
! Clean residual mean=0.000000 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.042218 Jy
keep
! Adding 417 model components to the UV plane model.
! The established model now contains 509 components and 0.042218 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/sb072/temp_maps//J1120-2508_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.46 x 4.185 at -21.23 degrees (North through East)
! Clean map  min=-0.0012509  max=0.0095868 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1120-2508_X_map.fits
wmodel /vlbi/sb072/temp_maps//J1120-2508_X_map.mod
! Writing 509 model components to file: /vlbi/sb072/temp_maps//J1120-2508_X_map.mod
wobs   /vlbi/sb072/temp_maps//J1120-2508_X_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J1120-2508_X_uvs.fits
wwins  /vlbi/sb072/temp_maps//J1120-2508_X_map.win
! wwins: Wrote 2 windows to /vlbi/sb072/temp_maps//J1120-2508_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.00958678 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216487 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -6.77456 6.77456 13.5491 27.0982 54.1965
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.009 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  44.283 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J1120-2508_X_dfm.log closed on Thu Jan 31 09:32:42 2019