! Started logfile: /vlbi/sb072/temp_maps//J1051-3138_C_dfm.log on Fri Jan 25 19:25:56 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/sb072/temp_maps//J1051-3138_C_uvm.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J1051-3138_C_uvm.fits
! AN table 1: 6 integrations on 21 of 21 possible baselines.
! AN table 2: 23 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.971576 visibilities/baseline/integration-bin.
! Found source: J1051-3138
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 9024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1051-3138_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.192618Jy  sigma=30.346617
! Fit after  self-cal, rms=0.539393Jy  sigma=13.016461
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.173 mas, bmaj=3.446 mas, bpa=-12.04 degrees
! Estimated noise=0.647742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.375166 Jy
! Component: 100  -  total flux cleaned = 0.473219 Jy
! Total flux subtracted in 100 components = 0.473219 Jy
! Clean residual min=-0.034709 max=0.047907 Jy/beam
! Clean residual mean=0.000033 rms=0.005375 Jy/beam
! Combined flux in latest and established models = 0.473219 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.473219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.306402Jy  sigma=6.736214
! Fit after  self-cal, rms=0.306388Jy  sigma=6.735685
! Inverting map 
! Added new window around map position (-2.1, 8.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0512279 Jy
! Component: 100  -  total flux cleaned = 0.0828834 Jy
! Total flux subtracted in 100 components = 0.0828834 Jy
! Clean residual min=-0.024392 max=0.033673 Jy/beam
! Clean residual mean=0.000039 rms=0.004641 Jy/beam
! Combined flux in latest and established models = 0.556102 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.556102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.288525Jy  sigma=6.139927
! Fit after  self-cal, rms=0.288260Jy  sigma=6.129526
! Inverting map 
! Added new window around map position (-2.7, 3.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0294294 Jy
! Component: 100  -  total flux cleaned = 0.048995 Jy
! Total flux subtracted in 100 components = 0.048995 Jy
! Clean residual min=-0.020328 max=0.025458 Jy/beam
! Clean residual mean=0.000042 rms=0.004403 Jy/beam
! Combined flux in latest and established models = 0.605097 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 34 components and 0.605097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.281754Jy  sigma=5.924643
! Fit after  self-cal, rms=0.281570Jy  sigma=5.915679
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.753 mas, bmaj=4.765 mas, bpa=-7.194 degrees
! Estimated noise=0.315611 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0355631 Jy
! Component: 100  -  total flux cleaned = 0.0558109 Jy
! Component: 150  -  total flux cleaned = 0.068226 Jy
! Component: 200  -  total flux cleaned = 0.076005 Jy
! Total flux subtracted in 200 components = 0.076005 Jy
! Clean residual min=-0.017683 max=0.032966 Jy/beam
! Clean residual mean=0.000038 rms=0.006470 Jy/beam
! Combined flux in latest and established models = 0.681102 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 0.681102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.276967Jy  sigma=5.787063
! Fit after  self-cal, rms=0.276924Jy  sigma=5.781064
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.753 x 4.765 at -7.194 degrees (North through East)
! Clean map  min=-0.016966  max=0.4911 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        3.03     HN        0.56     LA        0.57     NL        0.46     
!   OV        0.53     PT        0.45     SC        0.66     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        0.94     HN        1.16     KP        0.97     
!   LA        1.05     MK        0.98     NL        1.08     OV        1.05     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        3.52     HN        0.49     LA        0.52     NL        0.41     
!   OV        0.46     PT        0.39     SC        0.52     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        0.95     HN        1.15     KP        0.95     
!   LA        1.06     MK        0.97     NL        1.10     OV        1.03     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.80     HN        1.06     LA        0.98     NL        0.88     
!   OV        0.96     PT        1.27     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.17     FD        0.94     HN        1.18     KP        0.96     
!   LA        1.07     MK        1.03     NL        1.10     OV        1.06     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.78     HN        1.03     LA        0.95     NL        0.88     
!   OV        1.08     PT        0.86     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        0.95     HN        1.17     KP        0.97     
!   LA        1.07     MK        0.97     NL        1.17     OV        1.04     
!   PT        0.92     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.79     HN        1.10     LA        0.96     NL        0.98     
!   OV        0.94     PT        0.81     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.24     FD        0.97     HN        1.17     KP        0.99     
!   LA        1.09     MK        0.98     NL        1.12     OV        1.05     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.78     HN        1.08     LA        0.98     NL        1.02     
!   OV        0.96     PT        0.83     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.97     HN        1.21     KP        0.99     
!   LA        1.09     MK        0.99     NL        1.12     OV        1.07     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.79     HN        1.08     LA        0.97     NL        0.98     
!   OV        0.92     PT        0.82     SC        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        0.97     HN        1.20     KP        0.99     
!   LA        1.09     MK        1.00     NL        1.13     OV        1.07     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.78     HN        1.11     LA        0.98     NL        0.98     
!   OV        0.96     PT        0.84     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     FD        0.97     HN        1.21     KP        1.00     
!   LA        1.10     MK        1.00     NL        1.13     OV        1.08     
!   PT        0.98     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.276924Jy  sigma=5.781064
! Fit after  self-cal, rms=0.080700Jy  sigma=1.333785
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.772 mas, bmaj=4.829 mas, bpa=-7.088 degrees
! Estimated noise=0.319739 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00494735 Jy
! Component: 100  -  total flux cleaned = -0.00475196 Jy
! Component: 150  -  total flux cleaned = -0.0047573 Jy
! Component: 200  -  total flux cleaned = -0.00491397 Jy
! Total flux subtracted in 200 components = -0.00491397 Jy
! Clean residual min=-0.006833 max=0.007195 Jy/beam
! Clean residual mean=-0.000000 rms=0.001426 Jy/beam
! Combined flux in latest and established models = 0.676188 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.676188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.079381Jy  sigma=1.306790
! Fit after  self-cal, rms=0.079360Jy  sigma=1.302153
! Inverting map 
! Added new window around map position (-25.8, 50.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0050738 Jy
! Component: 100  -  total flux cleaned = 0.00528326 Jy
! Component: 150  -  total flux cleaned = 0.00492149 Jy
! Component: 200  -  total flux cleaned = 0.00459859 Jy
! Total flux subtracted in 200 components = 0.00459859 Jy
! Clean residual min=-0.006292 max=0.006321 Jy/beam
! Clean residual mean=0.000001 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 0.680787 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 99 components and 0.680787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077845Jy  sigma=1.272693
! Fit after  self-cal, rms=0.077563Jy  sigma=1.266897
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077563Jy  sigma=1.266897
! Fit after  self-cal, rms=0.077511Jy  sigma=1.263754
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.776 mas, bmaj=4.836 mas, bpa=-7.145 degrees
! Estimated noise=0.320032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00040884 Jy
! Component: 100  -  total flux cleaned = -0.000392534 Jy
! Component: 150  -  total flux cleaned = -0.000543091 Jy
! Component: 200  -  total flux cleaned = -0.000818132 Jy
! Total flux subtracted in 200 components = -0.000818132 Jy
! Clean residual min=-0.005667 max=0.005859 Jy/beam
! Clean residual mean=0.000001 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.679969 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 106 components and 0.679969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076603Jy  sigma=1.247178
! Fit after  self-cal, rms=0.076454Jy  sigma=1.244617
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.19673e-05 Jy
! Component: 100  -  total flux cleaned = 9.10865e-05 Jy
! Component: 150  -  total flux cleaned = -3.45263e-05 Jy
! Component: 200  -  total flux cleaned = -0.000266233 Jy
! Total flux subtracted in 200 components = -0.000266233 Jy
! Clean residual min=-0.005306 max=0.005577 Jy/beam
! Clean residual mean=0.000001 rms=0.001196 Jy/beam
! Combined flux in latest and established models = 0.679703 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 117 components and 0.679702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075877Jy  sigma=1.233924
! Fit after  self-cal, rms=0.075771Jy  sigma=1.232510
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075771Jy  sigma=1.232510
! Fit after  self-cal, rms=0.071848Jy  sigma=1.200534
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.778 mas, bmaj=4.838 mas, bpa=-7.155 degrees
! Estimated noise=0.319773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00164254 Jy
! Component: 100  -  total flux cleaned = -0.00175298 Jy
! Component: 150  -  total flux cleaned = -0.00186091 Jy
! Component: 200  -  total flux cleaned = -0.00196671 Jy
! Total flux subtracted in 200 components = -0.00196671 Jy
! Clean residual min=-0.004942 max=0.005249 Jy/beam
! Clean residual mean=-0.000000 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.677736 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 121 components and 0.677736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.071357Jy  sigma=1.192713
! Fit after  self-cal, rms=0.071279Jy  sigma=1.191880
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.3, -18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480803 Jy
! Component: 100  -  total flux cleaned = 0.0050386 Jy
! Component: 150  -  total flux cleaned = 0.00514181 Jy
! Component: 200  -  total flux cleaned = 0.00523585 Jy
! Total flux subtracted in 200 components = 0.00523585 Jy
! Clean residual min=-0.004915 max=0.005383 Jy/beam
! Clean residual mean=-0.000000 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.682972 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 136 components and 0.682972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070731Jy  sigma=1.178024
! Fit after  self-cal, rms=0.070631Jy  sigma=1.176285
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070631Jy  sigma=1.176285
! Fit after  self-cal, rms=0.068013Jy  sigma=1.157173
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.002 mas, bmaj=10.93 mas, bpa=-6.262 degrees
! Estimated noise=0.369775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000180026 Jy
! Component: 100  -  total flux cleaned = -0.000254683 Jy
! Component: 150  -  total flux cleaned = -0.000255816 Jy
! Component: 200  -  total flux cleaned = -0.00020196 Jy
! Total flux subtracted in 200 components = -0.00020196 Jy
! Clean residual min=-0.004413 max=0.004471 Jy/beam
! Clean residual mean=0.000000 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.68277 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 151 components and 0.68277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067904Jy  sigma=1.156699
! Fit after  self-cal, rms=0.067848Jy  sigma=1.155471
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.04788e-05 Jy
! Component: 100  -  total flux cleaned = 0.000300896 Jy
! Component: 150  -  total flux cleaned = 0.000451391 Jy
! Component: 200  -  total flux cleaned = 0.000499026 Jy
! Total flux subtracted in 200 components = 0.000499026 Jy
! Clean residual min=-0.004007 max=0.004320 Jy/beam
! Clean residual mean=0.000000 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 0.683269 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 157 components and 0.683269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067837Jy  sigma=1.154730
! Fit after  self-cal, rms=0.067804Jy  sigma=1.154209
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.779 mas, bmaj=4.835 mas, bpa=-7.162 degrees
! Estimated noise=0.318971 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.779 x 4.835 at -7.162 degrees (North through East)
! Clean map  min=-0.004736  max=0.49404 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.184 mas, bmaj=3.469 mas, bpa=-11.98 degrees
! Estimated noise=0.671601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.388183 Jy
! Component: 100  -  total flux cleaned = 0.488516 Jy
! Component: 150  -  total flux cleaned = 0.53743 Jy
! Component: 200  -  total flux cleaned = 0.566835 Jy
! Total flux subtracted in 200 components = 0.566835 Jy
! Clean residual min=-0.014952 max=0.016055 Jy/beam
! Clean residual mean=-0.000004 rms=0.002456 Jy/beam
! Combined flux in latest and established models = 0.566835 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.566835 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.779 mas, bmaj=4.835 mas, bpa=-7.162 degrees
! Estimated noise=0.318971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0437393 Jy
! Component: 100  -  total flux cleaned = 0.0669938 Jy
! Component: 150  -  total flux cleaned = 0.0818994 Jy
! Component: 200  -  total flux cleaned = 0.0923599 Jy
! Total flux subtracted in 200 components = 0.0923599 Jy
! Clean residual min=-0.004392 max=0.008809 Jy/beam
! Clean residual mean=0.000005 rms=0.001566 Jy/beam
! Combined flux in latest and established models = 0.659195 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 94 components and 0.659194 Jy
! Inverting map 
! Added new window around map position (27.3, -52.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00872185 Jy
! Component: 100  -  total flux cleaned = 0.0136487 Jy
! Component: 150  -  total flux cleaned = 0.0153535 Jy
! Component: 200  -  total flux cleaned = 0.0169882 Jy
! Total flux subtracted in 200 components = 0.0169882 Jy
! Clean residual min=-0.003689 max=0.005064 Jy/beam
! Clean residual mean=0.000002 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.676183 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 117 components and 0.676183 Jy
! Inverting map 
! Added new window around map position (-36.3, 59.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272 Jy
! Component: 100  -  total flux cleaned = 0.00317394 Jy
! Component: 150  -  total flux cleaned = 0.00344621 Jy
! Component: 200  -  total flux cleaned = 0.00370417 Jy
! Total flux subtracted in 200 components = 0.00370417 Jy
! Clean residual min=-0.003924 max=0.004557 Jy/beam
! Clean residual mean=0.000001 rms=0.000918 Jy/beam
! Combined flux in latest and established models = 0.679887 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 143 components and 0.679887 Jy
! Inverting map 
! Added new window around map position (36.3, -59.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208886 Jy
! Component: 100  -  total flux cleaned = 0.0022185 Jy
! Component: 150  -  total flux cleaned = 0.00246094 Jy
! Component: 200  -  total flux cleaned = 0.00269117 Jy
! Total flux subtracted in 200 components = 0.00269117 Jy
! Clean residual min=-0.003989 max=0.003980 Jy/beam
! Clean residual mean=0.000000 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.682578 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 163 components and 0.682578 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.002 mas, bmaj=10.93 mas, bpa=-6.262 degrees
! Estimated noise=0.369775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277457 Jy
! Component: 100  -  total flux cleaned = 0.00351343 Jy
! Component: 150  -  total flux cleaned = 0.00357475 Jy
! Component: 200  -  total flux cleaned = 0.00363216 Jy
! Total flux subtracted in 200 components = 0.00363216 Jy
! Clean residual min=-0.003310 max=0.003331 Jy/beam
! Clean residual mean=0.000000 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.68621 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.67823e-06 Jy
! Component: 100  -  total flux cleaned = 5.12544e-05 Jy
! Component: 150  -  total flux cleaned = 5.25778e-05 Jy
! Component: 200  -  total flux cleaned = 5.37472e-05 Jy
! Total flux subtracted in 200 components = 5.37472e-05 Jy
! Clean residual min=-0.003172 max=0.003287 Jy/beam
! Clean residual mean=-0.000000 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.686264 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 185 components and 0.686264 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.779 mas, bmaj=4.835 mas, bpa=-7.162 degrees
! Estimated noise=0.318971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00167065 Jy
! Component: 100  -  total flux cleaned = -0.0015691 Jy
! Component: 150  -  total flux cleaned = -0.00146831 Jy
! Component: 200  -  total flux cleaned = -0.0014646 Jy
! Total flux subtracted in 200 components = -0.0014646 Jy
! Clean residual min=-0.003675 max=0.003999 Jy/beam
! Clean residual mean=-0.000000 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.684799 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 200 components and 0.684799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066027Jy  sigma=1.119276
! Fit after  self-cal, rms=0.065752Jy  sigma=1.113691
wmodel J1051-3138_C_map.mod
! Writing 200 model components to file: J1051-3138_C_map.mod
wobs   J1051-3138_C_uvs.fits
! Writing UV FITS file: J1051-3138_C_uvs.fits
wwins  J1051-3138_C_map.win
! wwins: Wrote 8 windows to J1051-3138_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108257 Jy
! Component: 100  -  total flux cleaned = 4.1752e-05 Jy
! Component: 150  -  total flux cleaned = 0.00022102 Jy
! Component: 200  -  total flux cleaned = 0.000446825 Jy
! Component: 250  -  total flux cleaned = 0.000607046 Jy
! Component: 300  -  total flux cleaned = 0.000761406 Jy
! Component: 350  -  total flux cleaned = 0.000911136 Jy
! Component: 400  -  total flux cleaned = 0.00100859 Jy
! Component: 450  -  total flux cleaned = 0.00110396 Jy
! Component: 500  -  total flux cleaned = 0.00110337 Jy
! Component: 550  -  total flux cleaned = 0.00114991 Jy
! Component: 600  -  total flux cleaned = 0.0011961 Jy
! Component: 650  -  total flux cleaned = 0.00133094 Jy
! Component: 700  -  total flux cleaned = 0.00141917 Jy
! Component: 750  -  total flux cleaned = 0.00146278 Jy
! Component: 800  -  total flux cleaned = 0.00146268 Jy
! Component: 850  -  total flux cleaned = 0.0016351 Jy
! Component: 900  -  total flux cleaned = 0.00180589 Jy
! Component: 950  -  total flux cleaned = 0.00193243 Jy
! Component: 1000  -  total flux cleaned = 0.00189073 Jy
! Component: 1050  -  total flux cleaned = 0.00205747 Jy
! Component: 1100  -  total flux cleaned = 0.00214016 Jy
! Component: 1150  -  total flux cleaned = 0.002263 Jy
! Component: 1200  -  total flux cleaned = 0.00242566 Jy
! Component: 1250  -  total flux cleaned = 0.0025466 Jy
! Component: 1300  -  total flux cleaned = 0.00262684 Jy
! Component: 1350  -  total flux cleaned = 0.00282541 Jy
! Component: 1400  -  total flux cleaned = 0.00290429 Jy
! Component: 1450  -  total flux cleaned = 0.00306104 Jy
! Component: 1500  -  total flux cleaned = 0.00306099 Jy
! Component: 1550  -  total flux cleaned = 0.00329295 Jy
! Component: 1600  -  total flux cleaned = 0.00333096 Jy
! Component: 1650  -  total flux cleaned = 0.00340708 Jy
! Component: 1700  -  total flux cleaned = 0.00340661 Jy
! Component: 1750  -  total flux cleaned = 0.00348209 Jy
! Component: 1800  -  total flux cleaned = 0.00355658 Jy
! Component: 1850  -  total flux cleaned = 0.00359387 Jy
! Component: 1900  -  total flux cleaned = 0.00377844 Jy
! Component: 1950  -  total flux cleaned = 0.00370501 Jy
! Component: 2000  -  total flux cleaned = 0.00381395 Jy
! Component: 2050  -  total flux cleaned = 0.00381393 Jy
! Component: 2100  -  total flux cleaned = 0.00392177 Jy
! Component: 2150  -  total flux cleaned = 0.00395732 Jy
! Component: 2200  -  total flux cleaned = 0.00402862 Jy
! Component: 2250  -  total flux cleaned = 0.00402862 Jy
! Component: 2300  -  total flux cleaned = 0.0040641 Jy
! Component: 2350  -  total flux cleaned = 0.00416954 Jy
! Component: 2400  -  total flux cleaned = 0.00413454 Jy
! Component: 2450  -  total flux cleaned = 0.0042737 Jy
! Component: 2500  -  total flux cleaned = 0.00437733 Jy
! Component: 2550  -  total flux cleaned = 0.00441151 Jy
! Component: 2600  -  total flux cleaned = 0.00441166 Jy
! Component: 2650  -  total flux cleaned = 0.00464999 Jy
! Component: 2700  -  total flux cleaned = 0.00471766 Jy
! Component: 2750  -  total flux cleaned = 0.00475123 Jy
! Component: 2800  -  total flux cleaned = 0.0048185 Jy
! Component: 2850  -  total flux cleaned = 0.00491899 Jy
! Component: 2900  -  total flux cleaned = 0.00498563 Jy
! Component: 2950  -  total flux cleaned = 0.0050518 Jy
! Component: 3000  -  total flux cleaned = 0.00518326 Jy
! Component: 3050  -  total flux cleaned = 0.00521628 Jy
! Component: 3100  -  total flux cleaned = 0.00524899 Jy
! Component: 3150  -  total flux cleaned = 0.00531417 Jy
! Component: 3200  -  total flux cleaned = 0.00547635 Jy
! Component: 3250  -  total flux cleaned = 0.00537947 Jy
! Component: 3300  -  total flux cleaned = 0.00563673 Jy
! Component: 3350  -  total flux cleaned = 0.00554037 Jy
! Component: 3400  -  total flux cleaned = 0.0056682 Jy
! Component: 3450  -  total flux cleaned = 0.00570018 Jy
! Component: 3500  -  total flux cleaned = 0.00570001 Jy
! Component: 3550  -  total flux cleaned = 0.00582616 Jy
! Component: 3600  -  total flux cleaned = 0.0058577 Jy
! Component: 3650  -  total flux cleaned = 0.0059517 Jy
! Component: 3700  -  total flux cleaned = 0.00601377 Jy
! Component: 3750  -  total flux cleaned = 0.00604486 Jy
! Component: 3800  -  total flux cleaned = 0.00613768 Jy
! Component: 3850  -  total flux cleaned = 0.00616833 Jy
! Component: 3900  -  total flux cleaned = 0.00619918 Jy
! Component: 3950  -  total flux cleaned = 0.00632176 Jy
! Component: 4000  -  total flux cleaned = 0.00647382 Jy
! Component: 4050  -  total flux cleaned = 0.00650401 Jy
! Total flux subtracted in 4096 components = 0.0066249 Jy
! Clean residual min=-0.001722 max=0.001510 Jy/beam
! Clean residual mean=0.000003 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.691424 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 451 components and 0.691424 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/sb072/temp_maps//J1051-3138_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.779 x 4.835 at -7.162 degrees (North through East)
! Clean map  min=-0.0041965  max=0.50537 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J1051-3138_C_map.fits
wmodel /vlbi/sb072/temp_maps//J1051-3138_C_map.mod
! Writing 451 model components to file: /vlbi/sb072/temp_maps//J1051-3138_C_map.mod
wobs   /vlbi/sb072/temp_maps//J1051-3138_C_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J1051-3138_C_uvs.fits
wwins  /vlbi/sb072/temp_maps//J1051-3138_C_map.win
! wwins: Wrote 9 windows to /vlbi/sb072/temp_maps//J1051-3138_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.505367 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000541611 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.321516 0.321516 0.643031 1.28606 2.57213 5.14425 10.2885 20.577 41.154 82.308
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.505 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  933.08 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J1051-3138_C_dfm.log closed on Fri Jan 25 19:26:01 2019