! Started logfile: /vlbi/sb072/temp_maps//J0841+7053_X_dfm.log on Tue Mar 5 22:51:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J0841+7053_X_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0841+7053_X_uvm.fits ! AN table 1: 5 integrations on 28 of 28 possible baselines. ! AN table 2: 4 integrations on 21 of 21 possible baselines. ! AN table 3: 4 integrations on 6 of 6 possible baselines. ! AN table 4: 4 integrations on 10 of 10 possible baselines. ! AN table 5: 4 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.955 visibilities/baseline/integration-bin. ! Found source: J0841+7053 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 3056 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0841+7053_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.700096Jy sigma=63.264747 ! Fit after self-cal, rms=0.547004Jy sigma=20.576078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8597 mas, bmaj=1.571 mas, bpa=68.86 degrees ! Estimated noise=0.54148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.9633 Jy ! Component: 100 - total flux cleaned = 1.28933 Jy ! Total flux subtracted in 100 components = 1.28933 Jy ! Clean residual min=-0.067321 max=0.156217 Jy/beam ! Clean residual mean=0.000008 rms=0.017010 Jy/beam ! Combined flux in latest and established models = 1.28933 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.28933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.355480Jy sigma=13.204464 ! Fit after self-cal, rms=0.351490Jy sigma=13.078917 ! Inverting map ! Added new window around map position (-0.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.179295 Jy ! Component: 100 - total flux cleaned = 0.280016 Jy ! Total flux subtracted in 100 components = 0.280016 Jy ! Clean residual min=-0.041239 max=0.065078 Jy/beam ! Clean residual mean=0.000015 rms=0.009765 Jy/beam ! Combined flux in latest and established models = 1.56935 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 1.56935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.208545Jy sigma=7.479910 ! Fit after self-cal, rms=0.202684Jy sigma=7.314654 ! Inverting map ! Added new window around map position (-1.8, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754139 Jy ! Component: 100 - total flux cleaned = 0.1232 Jy ! Total flux subtracted in 100 components = 0.1232 Jy ! Clean residual min=-0.032211 max=0.038963 Jy/beam ! Clean residual mean=0.000020 rms=0.007317 Jy/beam ! Combined flux in latest and established models = 1.69255 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 1.69255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.161047Jy sigma=5.747097 ! Fit after self-cal, rms=0.156581Jy sigma=5.613672 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.816 mas, bpa=68.7 degrees ! Estimated noise=0.35793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509329 Jy ! Component: 100 - total flux cleaned = 0.0784526 Jy ! Component: 150 - total flux cleaned = 0.0948089 Jy ! Component: 200 - total flux cleaned = 0.0988829 Jy ! Total flux subtracted in 200 components = 0.0988829 Jy ! Clean residual min=-0.040933 max=0.036614 Jy/beam ! Clean residual mean=0.000057 rms=0.008337 Jy/beam ! Combined flux in latest and established models = 1.79143 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 1.79143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.138249Jy sigma=4.984421 ! Fit after self-cal, rms=0.135532Jy sigma=4.897815 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.114 x 1.816 at 68.7 degrees (North through East) ! Clean map min=-0.039485 max=1.2788 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 0.92 KP 1.00 ! LA 1.03 NL 1.04 OV 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 0.96 LA 0.97 MK 1.02 ! OV 0.98 PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.08 MK 0.92 NL 1.08 OV 1.19 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 LA 1.05 MK 0.95 NL 1.10 ! OV 1.08 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.05 KP 0.96 LA 0.99 ! MK 1.00 NL 1.00 OV 1.07 PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.04 HN 0.93 KP 1.01 ! LA 1.02 NL 1.05 OV 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 0.96 LA 0.97 MK 1.01 ! OV 0.97 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.08 MK 0.93 NL 1.06 OV 1.19 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 LA 1.05 MK 0.95 NL 1.11 ! OV 1.08 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 1.05 KP 0.97 LA 1.00 ! MK 1.00 NL 1.00 OV 1.08 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 0.93 KP 1.01 ! LA 1.04 NL 1.04 OV 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 0.97 LA 0.97 MK 1.00 ! OV 0.96 PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.07 MK 0.92 NL 1.06 OV 1.19 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 LA 1.04 MK 0.94 NL 1.12 ! OV 1.09 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 1.06 KP 0.96 LA 1.01 ! MK 1.00 NL 0.99 OV 1.07 PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.91 KP 1.00 ! LA 1.04 NL 1.03 OV 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 0.97 LA 0.97 MK 1.01 ! OV 0.98 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.07 MK 0.90 NL 1.07 OV 1.17 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 LA 1.04 MK 0.93 NL 1.12 ! OV 1.08 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.06 KP 0.96 LA 1.01 ! MK 0.99 NL 1.00 OV 1.08 PT 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.04 HN 0.93 KP 0.99 ! LA 1.03 NL 1.04 OV 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 0.97 LA 0.98 MK 1.04 ! OV 0.97 PT 0.93 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.08 MK 0.90 NL 1.05 OV 1.19 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 LA 1.05 MK 0.93 NL 1.11 ! OV 1.09 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.07 KP 0.99 LA 1.02 ! MK 1.01 NL 0.99 OV 1.09 PT 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.93 KP 0.98 ! LA 1.03 NL 1.01 OV 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 0.98 LA 0.98 MK 1.02 ! OV 0.98 PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.08 MK 0.90 NL 1.05 OV 1.19 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 LA 1.03 MK 0.94 NL 1.11 ! OV 1.10 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 1.08 KP 0.96 LA 1.03 ! MK 1.01 NL 0.99 OV 1.08 PT 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 0.93 KP 1.00 ! LA 1.04 NL 1.01 OV 0.96 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 0.98 LA 0.99 MK 1.02 ! OV 0.97 PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.09 MK 0.89 NL 1.06 OV 1.17 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 LA 1.06 MK 0.92 NL 1.12 ! OV 1.08 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 1.09 KP 0.97 LA 1.03 ! MK 1.01 NL 1.01 OV 1.08 PT 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.94 KP 1.00 ! LA 1.02 NL 1.03 OV 0.97 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 0.98 LA 0.98 MK 1.02 ! OV 0.97 PT 0.91 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! LA 1.10 MK 0.89 NL 1.07 OV 1.17 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 LA 1.06 MK 0.92 NL 1.10 ! OV 1.09 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.07 KP 0.98 LA 1.03 ! MK 1.01 NL 0.99 OV 1.09 PT 0.93 ! ! ! Fit before self-cal, rms=0.135532Jy sigma=4.897815 ! Fit after self-cal, rms=0.082389Jy sigma=2.728489 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.115 mas, bmaj=1.792 mas, bpa=68.22 degrees ! Estimated noise=0.355656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244124 Jy ! Component: 100 - total flux cleaned = 0.0376325 Jy ! Component: 150 - total flux cleaned = 0.0400911 Jy ! Component: 200 - total flux cleaned = 0.0417854 Jy ! Total flux subtracted in 200 components = 0.0417854 Jy ! Clean residual min=-0.011300 max=0.016500 Jy/beam ! Clean residual mean=-0.000002 rms=0.003002 Jy/beam ! Combined flux in latest and established models = 1.83322 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 1.83322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.073946Jy sigma=2.374894 ! Fit after self-cal, rms=0.073015Jy sigma=2.340402 ! Inverting map ! Added new window around map position (-4.4, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134508 Jy ! Component: 100 - total flux cleaned = 0.0170058 Jy ! Component: 150 - total flux cleaned = 0.0186943 Jy ! Component: 200 - total flux cleaned = 0.0202053 Jy ! Total flux subtracted in 200 components = 0.0202053 Jy ! Clean residual min=-0.010665 max=0.011931 Jy/beam ! Clean residual mean=0.000003 rms=0.002630 Jy/beam ! Combined flux in latest and established models = 1.85342 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 1.85342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.068758Jy sigma=2.159741 ! Fit after self-cal, rms=0.068515Jy sigma=2.153223 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.068515Jy sigma=2.153223 ! Fit after self-cal, rms=0.066321Jy sigma=2.075499 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.789 mas, bpa=68.14 degrees ! Estimated noise=0.355307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109841 Jy ! Component: 100 - total flux cleaned = 0.0190004 Jy ! Component: 150 - total flux cleaned = 0.0222315 Jy ! Component: 200 - total flux cleaned = 0.0236705 Jy ! Total flux subtracted in 200 components = 0.0236705 Jy ! Clean residual min=-0.007989 max=0.009704 Jy/beam ! Clean residual mean=0.000001 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 1.87709 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 114 components and 1.87709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.063543Jy sigma=1.955973 ! Fit after self-cal, rms=0.063319Jy sigma=1.950084 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23.6, -36.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775461 Jy ! Component: 100 - total flux cleaned = 0.0112971 Jy ! Component: 150 - total flux cleaned = 0.0129557 Jy ! Component: 200 - total flux cleaned = 0.0139121 Jy ! Total flux subtracted in 200 components = 0.0139121 Jy ! Clean residual min=-0.007688 max=0.008676 Jy/beam ! Clean residual mean=0.000004 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 1.891 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 133 components and 1.891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.061517Jy sigma=1.874728 ! Fit after self-cal, rms=0.061373Jy sigma=1.871341 ! Inverting map ! Added new window around map position (-12.2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668243 Jy ! Component: 100 - total flux cleaned = 0.00847939 Jy ! Component: 150 - total flux cleaned = 0.00937802 Jy ! Component: 200 - total flux cleaned = 0.0100529 Jy ! Total flux subtracted in 200 components = 0.0100529 Jy ! Clean residual min=-0.007084 max=0.008231 Jy/beam ! Clean residual mean=0.000004 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 1.90106 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 153 components and 1.90106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059843Jy sigma=1.811377 ! Fit after self-cal, rms=0.059814Jy sigma=1.809253 ! Inverting map ! Added new window around map position (-7.4, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00846376 Jy ! Component: 100 - total flux cleaned = 0.0124608 Jy ! Component: 150 - total flux cleaned = 0.0143261 Jy ! Component: 200 - total flux cleaned = 0.014938 Jy ! Total flux subtracted in 200 components = 0.014938 Jy ! Clean residual min=-0.006766 max=0.006650 Jy/beam ! Clean residual mean=-0.000004 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 1.91599 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 181 components and 1.91599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.058235Jy sigma=1.743638 ! Fit after self-cal, rms=0.058155Jy sigma=1.740784 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.058155Jy sigma=1.740784 ! Fit after self-cal, rms=0.057239Jy sigma=1.705989 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.785 mas, bpa=68.05 degrees ! Estimated noise=0.355274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586961 Jy ! Component: 100 - total flux cleaned = 0.0105427 Jy ! Component: 150 - total flux cleaned = 0.0132855 Jy ! Component: 200 - total flux cleaned = 0.0153086 Jy ! Total flux subtracted in 200 components = 0.0153086 Jy ! Clean residual min=-0.005692 max=0.005984 Jy/beam ! Clean residual mean=-0.000002 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 1.9313 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 196 components and 1.9313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056142Jy sigma=1.663281 ! Fit after self-cal, rms=0.056098Jy sigma=1.661766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.6, -40.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517614 Jy ! Component: 100 - total flux cleaned = 0.00727774 Jy ! Component: 150 - total flux cleaned = 0.00867793 Jy ! Component: 200 - total flux cleaned = 0.0093952 Jy ! Total flux subtracted in 200 components = 0.0093952 Jy ! Clean residual min=-0.005272 max=0.005287 Jy/beam ! Clean residual mean=-0.000002 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 1.9407 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 211 components and 1.9407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055239Jy sigma=1.630199 ! Fit after self-cal, rms=0.055209Jy sigma=1.628763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055209Jy sigma=1.628763 ! Fit after self-cal, rms=0.054987Jy sigma=1.618939 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.487 mas, bmaj=3.312 mas, bpa=60.91 degrees ! Estimated noise=0.434154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600864 Jy ! Component: 100 - total flux cleaned = 0.0103312 Jy ! Component: 150 - total flux cleaned = 0.0126827 Jy ! Component: 200 - total flux cleaned = 0.0142128 Jy ! Total flux subtracted in 200 components = 0.0142128 Jy ! Clean residual min=-0.005898 max=0.006020 Jy/beam ! Clean residual mean=-0.000005 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 1.95491 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 226 components and 1.95491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054397Jy sigma=1.598259 ! Fit after self-cal, rms=0.054361Jy sigma=1.596173 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114938 Jy ! Component: 100 - total flux cleaned = 0.00190047 Jy ! Component: 150 - total flux cleaned = 0.00190043 Jy ! Component: 200 - total flux cleaned = 0.00217439 Jy ! Total flux subtracted in 200 components = 0.00217439 Jy ! Clean residual min=-0.005485 max=0.005760 Jy/beam ! Clean residual mean=-0.000007 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 1.95709 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 237 components and 1.95709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054128Jy sigma=1.589446 ! Fit after self-cal, rms=0.054102Jy sigma=1.588511 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.783 mas, bpa=68.01 degrees ! Estimated noise=0.355408 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.114 x 1.783 at 68.01 degrees (North through East) ! Clean map min=-0.0050087 max=1.2727 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054102Jy sigma=1.588511 ! Fit after self-cal, rms=0.031679Jy sigma=0.989088 ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.783 mas, bpa=67.98 degrees ! Estimated noise=0.35541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260339 Jy ! Component: 100 - total flux cleaned = 0.00392617 Jy ! Component: 150 - total flux cleaned = 0.00489158 Jy ! Component: 200 - total flux cleaned = 0.00528529 Jy ! Total flux subtracted in 200 components = 0.00528529 Jy ! Clean residual min=-0.004395 max=0.004557 Jy/beam ! Clean residual mean=-0.000002 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 1.96237 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 253 components and 1.96237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030858Jy sigma=0.957562 ! Fit after self-cal, rms=0.030790Jy sigma=0.955787 ! Inverting map ! Added new window around map position (-24.4, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381692 Jy ! Component: 100 - total flux cleaned = 0.00456294 Jy ! Component: 150 - total flux cleaned = 0.00513085 Jy ! Component: 200 - total flux cleaned = 0.00601337 Jy ! Total flux subtracted in 200 components = 0.00601337 Jy ! Clean residual min=-0.004053 max=0.003879 Jy/beam ! Clean residual mean=-0.000001 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 1.96838 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 270 components and 1.96838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029942Jy sigma=0.925009 ! Fit after self-cal, rms=0.029893Jy sigma=0.923547 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029893Jy sigma=0.923547 ! Fit after self-cal, rms=0.029635Jy sigma=0.918773 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8613 mas, bmaj=1.549 mas, bpa=68.28 degrees ! Estimated noise=0.535039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.955739 Jy ! Component: 100 - total flux cleaned = 1.29771 Jy ! Component: 150 - total flux cleaned = 1.47477 Jy ! Component: 200 - total flux cleaned = 1.58259 Jy ! Total flux subtracted in 200 components = 1.58259 Jy ! Clean residual min=-0.023250 max=0.058451 Jy/beam ! Clean residual mean=-0.000008 rms=0.007193 Jy/beam ! Combined flux in latest and established models = 1.58259 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.58259 Jy ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.782 mas, bpa=67.96 degrees ! Estimated noise=0.355367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100432 Jy ! Component: 100 - total flux cleaned = 0.158785 Jy ! Component: 150 - total flux cleaned = 0.19871 Jy ! Component: 200 - total flux cleaned = 0.227893 Jy ! Total flux subtracted in 200 components = 0.227893 Jy ! Clean residual min=-0.011126 max=0.017723 Jy/beam ! Clean residual mean=0.000010 rms=0.003415 Jy/beam ! Combined flux in latest and established models = 1.81049 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 65 components and 1.81049 Jy ! Inverting map ! Added new window around map position (-5.2, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224298 Jy ! Component: 100 - total flux cleaned = 0.0403115 Jy ! Component: 150 - total flux cleaned = 0.0552663 Jy ! Component: 200 - total flux cleaned = 0.0680856 Jy ! Total flux subtracted in 200 components = 0.0680856 Jy ! Clean residual min=-0.007319 max=0.008104 Jy/beam ! Clean residual mean=0.000006 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 1.87857 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 108 components and 1.87857 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.486 mas, bmaj=3.307 mas, bpa=60.84 degrees ! Estimated noise=0.434279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176628 Jy ! Component: 100 - total flux cleaned = 0.031028 Jy ! Component: 150 - total flux cleaned = 0.0418272 Jy ! Component: 200 - total flux cleaned = 0.0510725 Jy ! Total flux subtracted in 200 components = 0.0510725 Jy ! Clean residual min=-0.007335 max=0.007320 Jy/beam ! Clean residual mean=-0.000001 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 1.92965 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797876 Jy ! Component: 100 - total flux cleaned = 0.014902 Jy ! Component: 150 - total flux cleaned = 0.0209474 Jy ! Component: 200 - total flux cleaned = 0.0256515 Jy ! Total flux subtracted in 200 components = 0.0256515 Jy ! Clean residual min=-0.006775 max=0.006295 Jy/beam ! Clean residual mean=-0.000003 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 1.9553 Jy ! Adding 127 model components to the UV plane model. ! The established model now contains 222 components and 1.9553 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.782 mas, bpa=67.96 degrees ! Estimated noise=0.355367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371618 Jy ! Component: 100 - total flux cleaned = 0.00413962 Jy ! Component: 150 - total flux cleaned = 0.0054025 Jy ! Component: 200 - total flux cleaned = 0.0068648 Jy ! Total flux subtracted in 200 components = 0.0068648 Jy ! Clean residual min=-0.005090 max=0.005331 Jy/beam ! Clean residual mean=-0.000001 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 1.96216 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 247 components and 1.96216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032306Jy sigma=1.027255 ! Fit after self-cal, rms=0.031290Jy sigma=0.982132 wmodel J0841+7053_X_map.mod ! Writing 247 model components to file: J0841+7053_X_map.mod wobs J0841+7053_X_uvs.fits ! Writing UV FITS file: J0841+7053_X_uvs.fits wwins J0841+7053_X_map.win ! wwins: Wrote 11 windows to J0841+7053_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886655 Jy ! Component: 100 - total flux cleaned = 0.00127314 Jy ! Component: 150 - total flux cleaned = 0.00142232 Jy ! Component: 200 - total flux cleaned = 0.00170509 Jy ! Component: 250 - total flux cleaned = 0.00184096 Jy ! Component: 300 - total flux cleaned = 0.00197301 Jy ! Component: 350 - total flux cleaned = 0.00203594 Jy ! Component: 400 - total flux cleaned = 0.00203426 Jy ! Component: 450 - total flux cleaned = 0.00221643 Jy ! Component: 500 - total flux cleaned = 0.00233475 Jy ! Component: 550 - total flux cleaned = 0.00262422 Jy ! Component: 600 - total flux cleaned = 0.00285215 Jy ! Component: 650 - total flux cleaned = 0.0029645 Jy ! Component: 700 - total flux cleaned = 0.00318377 Jy ! Component: 750 - total flux cleaned = 0.00328966 Jy ! Component: 800 - total flux cleaned = 0.00344604 Jy ! Component: 850 - total flux cleaned = 0.0034986 Jy ! Component: 900 - total flux cleaned = 0.00355033 Jy ! Component: 950 - total flux cleaned = 0.00394662 Jy ! Component: 1000 - total flux cleaned = 0.00389816 Jy ! Component: 1050 - total flux cleaned = 0.00409025 Jy ! Component: 1100 - total flux cleaned = 0.00432584 Jy ! Component: 1150 - total flux cleaned = 0.00441743 Jy ! Component: 1200 - total flux cleaned = 0.00469018 Jy ! Component: 1250 - total flux cleaned = 0.00473452 Jy ! Component: 1300 - total flux cleaned = 0.0049552 Jy ! Component: 1350 - total flux cleaned = 0.00521377 Jy ! Component: 1400 - total flux cleaned = 0.00529848 Jy ! Component: 1450 - total flux cleaned = 0.00542511 Jy ! Component: 1500 - total flux cleaned = 0.00554907 Jy ! Component: 1550 - total flux cleaned = 0.00575376 Jy ! Component: 1600 - total flux cleaned = 0.00591395 Jy ! Component: 1650 - total flux cleaned = 0.00603296 Jy ! Component: 1700 - total flux cleaned = 0.00622799 Jy ! Component: 1750 - total flux cleaned = 0.00642101 Jy ! Component: 1800 - total flux cleaned = 0.00661054 Jy ! Component: 1850 - total flux cleaned = 0.00687245 Jy ! Component: 1900 - total flux cleaned = 0.00690919 Jy ! Component: 1950 - total flux cleaned = 0.00727405 Jy ! Component: 2000 - total flux cleaned = 0.00727474 Jy ! Component: 2050 - total flux cleaned = 0.00755832 Jy ! Component: 2100 - total flux cleaned = 0.00769777 Jy ! Component: 2150 - total flux cleaned = 0.00780068 Jy ! Component: 2200 - total flux cleaned = 0.00793665 Jy ! Component: 2250 - total flux cleaned = 0.00813906 Jy ! Component: 2300 - total flux cleaned = 0.00840385 Jy ! Component: 2350 - total flux cleaned = 0.0084693 Jy ! Component: 2400 - total flux cleaned = 0.00866251 Jy ! Component: 2450 - total flux cleaned = 0.00891781 Jy ! Component: 2500 - total flux cleaned = 0.00904384 Jy ! Component: 2550 - total flux cleaned = 0.00938521 Jy ! Component: 2600 - total flux cleaned = 0.00947744 Jy ! Component: 2650 - total flux cleaned = 0.00959814 Jy ! Component: 2700 - total flux cleaned = 0.00980836 Jy ! Component: 2750 - total flux cleaned = 0.00995715 Jy ! Component: 2800 - total flux cleaned = 0.0102209 Jy ! Component: 2850 - total flux cleaned = 0.0103655 Jy ! Component: 2900 - total flux cleaned = 0.0105938 Jy ! Component: 2950 - total flux cleaned = 0.0107632 Jy ! Component: 3000 - total flux cleaned = 0.010875 Jy ! Component: 3050 - total flux cleaned = 0.0110679 Jy ! Component: 3100 - total flux cleaned = 0.01115 Jy ! Component: 3150 - total flux cleaned = 0.011258 Jy ! Component: 3200 - total flux cleaned = 0.011231 Jy ! Component: 3250 - total flux cleaned = 0.0113631 Jy ! Component: 3300 - total flux cleaned = 0.0114413 Jy ! Component: 3350 - total flux cleaned = 0.011467 Jy ! Component: 3400 - total flux cleaned = 0.0115186 Jy ! Component: 3450 - total flux cleaned = 0.0115694 Jy ! Component: 3500 - total flux cleaned = 0.0116197 Jy ! Component: 3550 - total flux cleaned = 0.0117683 Jy ! Component: 3600 - total flux cleaned = 0.0117189 Jy ! Component: 3650 - total flux cleaned = 0.011767 Jy ! Component: 3700 - total flux cleaned = 0.0118866 Jy ! Component: 3750 - total flux cleaned = 0.0118865 Jy ! Component: 3800 - total flux cleaned = 0.012028 Jy ! Component: 3850 - total flux cleaned = 0.0119812 Jy ! Component: 3900 - total flux cleaned = 0.0120965 Jy ! Component: 3950 - total flux cleaned = 0.012142 Jy ! Component: 4000 - total flux cleaned = 0.0121876 Jy ! Component: 4050 - total flux cleaned = 0.0122099 Jy ! Total flux subtracted in 4096 components = 0.012388 Jy ! Clean residual min=-0.001108 max=0.001405 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 1.97455 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 565 components and 1.97455 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0841+7053_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.114 x 1.782 at 67.96 degrees (North through East) ! Clean map min=-0.0033231 max=1.2628 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0841+7053_X_map.fits wmodel /vlbi/sb072/temp_maps//J0841+7053_X_map.mod ! Writing 565 model components to file: /vlbi/sb072/temp_maps//J0841+7053_X_map.mod wobs /vlbi/sb072/temp_maps//J0841+7053_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0841+7053_X_uvs.fits wwins /vlbi/sb072/temp_maps//J0841+7053_X_map.win ! wwins: Wrote 12 windows to /vlbi/sb072/temp_maps//J0841+7053_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.2628 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00040517 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0962548 0.0962548 0.19251 0.385019 0.770038 1.54008 3.08015 6.16031 12.3206 24.6412 49.2825 98.5649 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.262 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3116.73 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0841+7053_X_dfm.log closed on Tue Mar 5 22:51:05 2019