! Started logfile: /vlbi/sb072/temp_maps//J0805+6144_C_dfm.log on Tue Mar 5 22:47:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/sb072/temp_maps//J0805+6144_C_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0805+6144_C_uvm.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 4 integrations on 36 of 36 possible baselines. ! AN table 3: 4 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 3552 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J0805+6144_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.172520Jy sigma=48.042955 ! Fit after self-cal, rms=0.454364Jy sigma=18.634569 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.36 mas, bmaj=2.672 mas, bpa=51.48 degrees ! Estimated noise=0.471789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.403903 Jy ! Component: 100 - total flux cleaned = 0.512955 Jy ! Total flux subtracted in 100 components = 0.512955 Jy ! Clean residual min=-0.021932 max=0.050485 Jy/beam ! Clean residual mean=-0.000061 rms=0.005295 Jy/beam ! Combined flux in latest and established models = 0.512954 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.512954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.163694Jy sigma=6.481837 ! Fit after self-cal, rms=0.163018Jy sigma=6.466306 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0605711 Jy ! Component: 100 - total flux cleaned = 0.0977727 Jy ! Total flux subtracted in 100 components = 0.0977727 Jy ! Clean residual min=-0.015099 max=0.029659 Jy/beam ! Clean residual mean=-0.000045 rms=0.003708 Jy/beam ! Combined flux in latest and established models = 0.610727 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.610727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.115407Jy sigma=4.539293 ! Fit after self-cal, rms=0.114421Jy sigma=4.511799 ! Inverting map ! Added new window around map position (0.9, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330703 Jy ! Component: 100 - total flux cleaned = 0.054636 Jy ! Total flux subtracted in 100 components = 0.054636 Jy ! Clean residual min=-0.012813 max=0.022024 Jy/beam ! Clean residual mean=-0.000033 rms=0.002992 Jy/beam ! Combined flux in latest and established models = 0.665363 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.665363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.094217Jy sigma=3.702753 ! Fit after self-cal, rms=0.092777Jy sigma=3.655810 ! Inverting map ! Added new window around map position (-4.5, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224517 Jy ! Component: 100 - total flux cleaned = 0.0384994 Jy ! Total flux subtracted in 100 components = 0.0384994 Jy ! Clean residual min=-0.010403 max=0.016709 Jy/beam ! Clean residual mean=-0.000028 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 0.703862 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.703862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.081734Jy sigma=3.214204 ! Fit after self-cal, rms=0.081309Jy sigma=3.202103 ! Inverting map ! Added new window around map position (4.5, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163232 Jy ! Component: 100 - total flux cleaned = 0.0280367 Jy ! Total flux subtracted in 100 components = 0.0280367 Jy ! Clean residual min=-0.009248 max=0.010688 Jy/beam ! Clean residual mean=-0.000025 rms=0.002230 Jy/beam ! Combined flux in latest and established models = 0.731899 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.731899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.074817Jy sigma=2.947709 ! Fit after self-cal, rms=0.074594Jy sigma=2.940772 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.786 mas, bmaj=3.24 mas, bpa=54.8 degrees ! Estimated noise=0.319009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173298 Jy ! Component: 100 - total flux cleaned = 0.0288464 Jy ! Component: 150 - total flux cleaned = 0.0372049 Jy ! Component: 200 - total flux cleaned = 0.0434107 Jy ! Total flux subtracted in 200 components = 0.0434107 Jy ! Clean residual min=-0.008609 max=0.010415 Jy/beam ! Clean residual mean=-0.000097 rms=0.002716 Jy/beam ! Combined flux in latest and established models = 0.77531 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 69 components and 0.77531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.069415Jy sigma=2.730357 ! Fit after self-cal, rms=0.069113Jy sigma=2.720136 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.786 x 3.24 at 54.8 degrees (North through East) ! Clean map min=-0.008516 max=0.54581 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.91 HN 1.06 KP 1.02 ! MK 0.90 NL 1.13 OV 0.83 PT 0.82 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.97 HN 0.95 KP 1.00 ! LA 1.07 MK 0.96 NL 1.06 OV 1.02 ! PT 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.92 LA 1.02 MK 1.01 ! NL 1.01 OV 0.98 PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 1.04 KP 0.97 ! MK 0.89 NL 1.12 OV 0.87 PT 0.79 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.98 HN 0.95 KP 1.01 ! LA 1.07 MK 0.95 NL 1.06 OV 1.02 ! PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.92 LA 1.02 MK 1.01 ! NL 1.00 OV 0.99 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.01 KP 0.99 ! MK 0.98 NL 1.02 OV 1.02 PT 0.95 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 HN 0.95 KP 1.02 ! LA 1.08 MK 0.97 NL 1.07 OV 1.04 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.92 LA 1.05 MK 1.00 ! NL 1.02 OV 0.98 PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 0.99 KP 0.99 ! MK 0.99 NL 1.07 OV 1.02 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 HN 0.93 KP 1.02 ! LA 1.08 MK 0.96 NL 1.07 OV 1.04 ! PT 1.24 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.92 LA 1.03 MK 1.04 ! NL 0.99 OV 0.99 PT 0.79 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 0.96 KP 0.99 ! MK 0.99 NL 1.04 OV 1.03 PT 0.98 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 HN 0.95 KP 1.03 ! LA 1.09 MK 0.96 NL 1.10 OV 1.04 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.94 LA 1.05 MK 1.02 ! NL 1.01 OV 0.99 PT 0.93 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.96 KP 1.00 ! MK 0.99 NL 1.04 OV 1.04 PT 0.99 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 HN 0.97 KP 1.02 ! LA 1.09 MK 0.96 NL 1.07 OV 1.06 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.95 LA 1.06 MK 1.03 ! NL 1.01 OV 1.01 PT 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.95 KP 1.01 ! MK 1.01 NL 1.04 OV 1.04 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00 HN 1.00 KP 1.03 ! LA 1.10 MK 0.97 NL 1.08 OV 1.05 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.94 LA 1.06 MK 1.00 ! NL 1.02 OV 1.01 PT 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.95 KP 1.01 ! MK 1.00 NL 1.04 OV 1.05 PT 0.99 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00 HN 1.00 KP 1.04 ! LA 1.10 MK 0.95 NL 1.07 OV 1.06 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.95 LA 1.06 MK 1.00 ! NL 1.01 OV 1.00 PT 0.94 ! ! ! Fit before self-cal, rms=0.069113Jy sigma=2.720136 ! Fit after self-cal, rms=0.032128Jy sigma=1.073838 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.789 mas, bmaj=3.229 mas, bpa=54.82 degrees ! Estimated noise=0.318143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00496608 Jy ! Component: 100 - total flux cleaned = -0.00449521 Jy ! Component: 150 - total flux cleaned = -0.0042365 Jy ! Component: 200 - total flux cleaned = -0.00401786 Jy ! Total flux subtracted in 200 components = -0.00401786 Jy ! Clean residual min=-0.003850 max=0.004181 Jy/beam ! Clean residual mean=-0.000015 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.771292 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.771292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030478Jy sigma=0.984203 ! Fit after self-cal, rms=0.030382Jy sigma=0.980615 ! Inverting map ! Added new window around map position (10.5, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286506 Jy ! Component: 100 - total flux cleaned = 0.00344012 Jy ! Component: 150 - total flux cleaned = 0.00381482 Jy ! Component: 200 - total flux cleaned = 0.00390102 Jy ! Total flux subtracted in 200 components = 0.00390102 Jy ! Clean residual min=-0.003217 max=0.003071 Jy/beam ! Clean residual mean=-0.000015 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.775193 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.775193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029607Jy sigma=0.940714 ! Fit after self-cal, rms=0.029498Jy sigma=0.937314 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029498Jy sigma=0.937314 ! Fit after self-cal, rms=0.029040Jy sigma=0.912868 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.788 mas, bmaj=3.224 mas, bpa=54.79 degrees ! Estimated noise=0.317988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223147 Jy ! Component: 100 - total flux cleaned = -0.00222927 Jy ! Component: 150 - total flux cleaned = -0.0022271 Jy ! Component: 200 - total flux cleaned = -0.00229427 Jy ! Total flux subtracted in 200 components = -0.00229427 Jy ! Clean residual min=-0.002801 max=0.002559 Jy/beam ! Clean residual mean=-0.000010 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.772899 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 0.772899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028357Jy sigma=0.877061 ! Fit after self-cal, rms=0.028307Jy sigma=0.875322 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127332 Jy ! Component: 100 - total flux cleaned = 0.000316295 Jy ! Component: 150 - total flux cleaned = 0.000540693 Jy ! Component: 200 - total flux cleaned = 0.000589925 Jy ! Total flux subtracted in 200 components = 0.000589925 Jy ! Clean residual min=-0.002624 max=0.002429 Jy/beam ! Clean residual mean=-0.000010 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.773489 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 0.773489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028073Jy sigma=0.863434 ! Fit after self-cal, rms=0.028034Jy sigma=0.862219 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028034Jy sigma=0.862219 ! Fit after self-cal, rms=0.027737Jy sigma=0.845093 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.788 mas, bmaj=3.221 mas, bpa=54.75 degrees ! Estimated noise=0.318023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00176802 Jy ! Component: 100 - total flux cleaned = -0.00177527 Jy ! Component: 150 - total flux cleaned = -0.00171982 Jy ! Component: 200 - total flux cleaned = -0.00167208 Jy ! Total flux subtracted in 200 components = -0.00167208 Jy ! Clean residual min=-0.002342 max=0.002069 Jy/beam ! Clean residual mean=-0.000007 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.771817 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 0.771817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027393Jy sigma=0.827488 ! Fit after self-cal, rms=0.027370Jy sigma=0.826730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161198 Jy ! Component: 100 - total flux cleaned = 0.000300245 Jy ! Component: 150 - total flux cleaned = 0.000299616 Jy ! Component: 200 - total flux cleaned = 0.00026137 Jy ! Total flux subtracted in 200 components = 0.00026137 Jy ! Clean residual min=-0.002201 max=0.002033 Jy/beam ! Clean residual mean=-0.000007 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.772078 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.772078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027234Jy sigma=0.820358 ! Fit after self-cal, rms=0.027215Jy sigma=0.819783 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027215Jy sigma=0.819783 ! Fit after self-cal, rms=0.027017Jy sigma=0.808912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=5.913 mas, bpa=50.19 degrees ! Estimated noise=0.396312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000671537 Jy ! Component: 100 - total flux cleaned = -0.000487528 Jy ! Component: 150 - total flux cleaned = -0.000377206 Jy ! Component: 200 - total flux cleaned = -0.000257968 Jy ! Total flux subtracted in 200 components = -0.000257968 Jy ! Clean residual min=-0.001531 max=0.001673 Jy/beam ! Clean residual mean=-0.000012 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.77182 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 0.77182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026920Jy sigma=0.803133 ! Fit after self-cal, rms=0.026904Jy sigma=0.802604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188283 Jy ! Component: 100 - total flux cleaned = 0.000268579 Jy ! Component: 150 - total flux cleaned = 0.000268579 Jy ! Component: 200 - total flux cleaned = 0.000268217 Jy ! Total flux subtracted in 200 components = 0.000268217 Jy ! Clean residual min=-0.001618 max=0.001611 Jy/beam ! Clean residual mean=-0.000012 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.772088 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 171 components and 0.772088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026883Jy sigma=0.801643 ! Fit after self-cal, rms=0.026878Jy sigma=0.801482 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.787 mas, bmaj=3.218 mas, bpa=54.72 degrees ! Estimated noise=0.318061 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.787 x 3.218 at 54.72 degrees (North through East) ! Clean map min=-0.0021926 max=0.54419 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026878Jy sigma=0.801482 ! Fit after self-cal, rms=0.024050Jy sigma=0.707734 ! Inverting map and beam ! Estimated beam: bmin=1.786 mas, bmaj=3.214 mas, bpa=54.78 degrees ! Estimated noise=0.317917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000986472 Jy ! Component: 100 - total flux cleaned = -0.000941771 Jy ! Component: 150 - total flux cleaned = -0.000904017 Jy ! Component: 200 - total flux cleaned = -0.000903912 Jy ! Total flux subtracted in 200 components = -0.000903912 Jy ! Clean residual min=-0.001882 max=0.001534 Jy/beam ! Clean residual mean=-0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.771185 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 178 components and 0.771185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023877Jy sigma=0.699416 ! Fit after self-cal, rms=0.023866Jy sigma=0.699060 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161801 Jy ! Component: 100 - total flux cleaned = 0.000196217 Jy ! Component: 150 - total flux cleaned = 0.000227241 Jy ! Component: 200 - total flux cleaned = 0.000226908 Jy ! Total flux subtracted in 200 components = 0.000226908 Jy ! Clean residual min=-0.001780 max=0.001532 Jy/beam ! Clean residual mean=-0.000003 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.771411 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 184 components and 0.771411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023782Jy sigma=0.695148 ! Fit after self-cal, rms=0.023774Jy sigma=0.694897 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023774Jy sigma=0.694897 ! Fit after self-cal, rms=0.023728Jy sigma=0.692816 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.361 mas, bmaj=2.661 mas, bpa=51.1 degrees ! Estimated noise=0.470282 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.402847 Jy ! Component: 100 - total flux cleaned = 0.515697 Jy ! Component: 150 - total flux cleaned = 0.579628 Jy ! Component: 200 - total flux cleaned = 0.622802 Jy ! Total flux subtracted in 200 components = 0.622802 Jy ! Clean residual min=-0.010674 max=0.023471 Jy/beam ! Clean residual mean=-0.000027 rms=0.002386 Jy/beam ! Combined flux in latest and established models = 0.622801 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.622801 Jy ! Inverting map and beam ! Estimated beam: bmin=1.786 mas, bmaj=3.213 mas, bpa=54.78 degrees ! Estimated noise=0.317902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514782 Jy ! Component: 100 - total flux cleaned = 0.0793526 Jy ! Component: 150 - total flux cleaned = 0.0963374 Jy ! Component: 200 - total flux cleaned = 0.107667 Jy ! Total flux subtracted in 200 components = 0.107667 Jy ! Clean residual min=-0.003680 max=0.007634 Jy/beam ! Clean residual mean=-0.000033 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.730468 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 59 components and 0.730468 Jy ! Inverting map ! Added new window around map position (5.1, -3.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853229 Jy ! Component: 100 - total flux cleaned = 0.014903 Jy ! Component: 150 - total flux cleaned = 0.0198742 Jy ! Component: 200 - total flux cleaned = 0.0238235 Jy ! Total flux subtracted in 200 components = 0.0238235 Jy ! Clean residual min=-0.002608 max=0.002927 Jy/beam ! Clean residual mean=-0.000014 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.754292 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 98 components and 0.754292 Jy ! Inverting map ! Added new window around map position (1.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341849 Jy ! Component: 100 - total flux cleaned = 0.00615152 Jy ! Component: 150 - total flux cleaned = 0.00780595 Jy ! Component: 200 - total flux cleaned = 0.00914943 Jy ! Total flux subtracted in 200 components = 0.00914943 Jy ! Clean residual min=-0.002184 max=0.001863 Jy/beam ! Clean residual mean=-0.000008 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.763441 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 117 components and 0.763441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=5.909 mas, bpa=50.23 degrees ! Estimated noise=0.396492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256785 Jy ! Component: 100 - total flux cleaned = 0.00423655 Jy ! Component: 150 - total flux cleaned = 0.00494206 Jy ! Component: 200 - total flux cleaned = 0.00520286 Jy ! Total flux subtracted in 200 components = 0.00520286 Jy ! Clean residual min=-0.001442 max=0.001512 Jy/beam ! Clean residual mean=-0.000012 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.768644 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223928 Jy ! Component: 100 - total flux cleaned = 0.000443706 Jy ! Component: 150 - total flux cleaned = 0.00054169 Jy ! Component: 200 - total flux cleaned = 0.000607991 Jy ! Total flux subtracted in 200 components = 0.000607991 Jy ! Clean residual min=-0.001351 max=0.001480 Jy/beam ! Clean residual mean=-0.000011 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.769252 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 181 components and 0.769252 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.786 mas, bmaj=3.213 mas, bpa=54.78 degrees ! Estimated noise=0.317902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.21738e-05 Jy ! Component: 100 - total flux cleaned = -6.73123e-05 Jy ! Component: 150 - total flux cleaned = -2.20747e-05 Jy ! Component: 200 - total flux cleaned = 5.81482e-05 Jy ! Total flux subtracted in 200 components = 5.81482e-05 Jy ! Clean residual min=-0.001810 max=0.001620 Jy/beam ! Clean residual mean=-0.000005 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.769311 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 199 components and 0.769311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023469Jy sigma=0.685172 ! Fit after self-cal, rms=0.023434Jy sigma=0.682625 wmodel J0805+6144_C_map.mod ! Writing 199 model components to file: J0805+6144_C_map.mod wobs J0805+6144_C_uvs.fits ! Writing UV FITS file: J0805+6144_C_uvs.fits wwins J0805+6144_C_map.win ! wwins: Wrote 7 windows to J0805+6144_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339649 Jy ! Component: 100 - total flux cleaned = -0.000394014 Jy ! Component: 150 - total flux cleaned = -0.000443901 Jy ! Component: 200 - total flux cleaned = -0.000514448 Jy ! Component: 250 - total flux cleaned = -0.000536856 Jy ! Component: 300 - total flux cleaned = -0.000623097 Jy ! Component: 350 - total flux cleaned = -0.000602099 Jy ! Component: 400 - total flux cleaned = -0.000561342 Jy ! Component: 450 - total flux cleaned = -0.000561344 Jy ! Component: 500 - total flux cleaned = -0.000462517 Jy ! Component: 550 - total flux cleaned = -0.000385423 Jy ! Component: 600 - total flux cleaned = -0.000328253 Jy ! Component: 650 - total flux cleaned = -0.00019785 Jy ! Component: 700 - total flux cleaned = -0.000143045 Jy ! Component: 750 - total flux cleaned = -0.000107117 Jy ! Component: 800 - total flux cleaned = -5.37621e-05 Jy ! Component: 850 - total flux cleaned = -1.08039e-06 Jy ! Component: 900 - total flux cleaned = 0.000120008 Jy ! Component: 950 - total flux cleaned = 0.000153851 Jy ! Component: 1000 - total flux cleaned = 0.000254745 Jy ! Component: 1050 - total flux cleaned = 0.000321376 Jy ! Component: 1100 - total flux cleaned = 0.000403511 Jy ! Component: 1150 - total flux cleaned = 0.000516846 Jy ! Component: 1200 - total flux cleaned = 0.000548789 Jy ! Component: 1250 - total flux cleaned = 0.000596197 Jy ! Component: 1300 - total flux cleaned = 0.000658907 Jy ! Component: 1350 - total flux cleaned = 0.00069005 Jy ! Component: 1400 - total flux cleaned = 0.000782054 Jy ! Component: 1450 - total flux cleaned = 0.000797169 Jy ! Component: 1500 - total flux cleaned = 0.000797129 Jy ! Component: 1550 - total flux cleaned = 0.000826645 Jy ! Component: 1600 - total flux cleaned = 0.000856163 Jy ! Component: 1650 - total flux cleaned = 0.000943153 Jy ! Component: 1700 - total flux cleaned = 0.000870806 Jy ! Component: 1750 - total flux cleaned = 0.000884881 Jy ! Component: 1800 - total flux cleaned = 0.000828375 Jy ! Component: 1850 - total flux cleaned = 0.000856227 Jy ! Component: 1900 - total flux cleaned = 0.000814431 Jy ! Component: 1950 - total flux cleaned = 0.000786932 Jy ! Component: 2000 - total flux cleaned = 0.000745947 Jy ! Component: 2050 - total flux cleaned = 0.000718942 Jy ! Component: 2100 - total flux cleaned = 0.000772553 Jy ! Component: 2150 - total flux cleaned = 0.000745934 Jy ! Component: 2200 - total flux cleaned = 0.000653569 Jy ! Component: 2250 - total flux cleaned = 0.000732222 Jy ! Component: 2300 - total flux cleaned = 0.000654063 Jy ! Component: 2350 - total flux cleaned = 0.000628367 Jy ! Component: 2400 - total flux cleaned = 0.000602782 Jy ! Component: 2450 - total flux cleaned = 0.000615317 Jy ! Component: 2500 - total flux cleaned = 0.000577539 Jy ! Component: 2550 - total flux cleaned = 0.000552514 Jy ! Component: 2600 - total flux cleaned = 0.000527567 Jy ! Component: 2650 - total flux cleaned = 0.00046601 Jy ! Component: 2700 - total flux cleaned = 0.000478159 Jy ! Component: 2750 - total flux cleaned = 0.000441869 Jy ! Component: 2800 - total flux cleaned = 0.000490236 Jy ! Component: 2850 - total flux cleaned = 0.000442383 Jy ! Component: 2900 - total flux cleaned = 0.000406709 Jy ! Component: 2950 - total flux cleaned = 0.000406659 Jy ! Component: 3000 - total flux cleaned = 0.000359776 Jy ! Component: 3050 - total flux cleaned = 0.000313143 Jy ! Component: 3100 - total flux cleaned = 0.000313356 Jy ! Component: 3150 - total flux cleaned = 0.000301892 Jy ! Component: 3200 - total flux cleaned = 0.000301893 Jy ! Component: 3250 - total flux cleaned = 0.000290588 Jy ! Component: 3300 - total flux cleaned = 0.000279331 Jy ! Component: 3350 - total flux cleaned = 0.00026802 Jy ! Component: 3400 - total flux cleaned = 0.00032351 Jy ! Component: 3450 - total flux cleaned = 0.000235091 Jy ! Component: 3500 - total flux cleaned = 0.000278903 Jy ! Component: 3550 - total flux cleaned = 0.000300728 Jy ! Component: 3600 - total flux cleaned = 0.000257221 Jy ! Component: 3650 - total flux cleaned = 0.000224877 Jy ! Component: 3700 - total flux cleaned = 0.000160666 Jy ! Component: 3750 - total flux cleaned = 0.000171367 Jy ! Component: 3800 - total flux cleaned = 0.000150276 Jy ! Component: 3850 - total flux cleaned = 0.000150313 Jy ! Component: 3900 - total flux cleaned = 0.000139856 Jy ! Component: 3950 - total flux cleaned = 0.0001711 Jy ! Component: 4000 - total flux cleaned = 0.000140197 Jy ! Component: 4050 - total flux cleaned = 0.000140192 Jy ! Total flux subtracted in 4096 components = 0.000129994 Jy ! Clean residual min=-0.000543 max=0.000544 Jy/beam ! Clean residual mean=-0.000004 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.769441 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 501 components and 0.76944 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0805+6144_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.786 x 3.213 at 54.78 degrees (North through East) ! Clean map min=-0.001336 max=0.54715 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0805+6144_C_map.fits wmodel /vlbi/sb072/temp_maps//J0805+6144_C_map.mod ! Writing 501 model components to file: /vlbi/sb072/temp_maps//J0805+6144_C_map.mod wobs /vlbi/sb072/temp_maps//J0805+6144_C_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0805+6144_C_uvs.fits wwins /vlbi/sb072/temp_maps//J0805+6144_C_map.win ! wwins: Wrote 8 windows to /vlbi/sb072/temp_maps//J0805+6144_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.54715 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184894 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.101377 0.101377 0.202753 0.405506 0.811013 1.62203 3.24405 6.4881 12.9762 25.9524 51.9048 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.547 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2959.26 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0805+6144_C_dfm.log closed on Tue Mar 5 22:47:37 2019