! Started logfile: /vlbi/sb072/temp_maps//J0639+7324_X_dfm.log on Tue Mar 5 22:43:35 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J0639+7324_X_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0639+7324_X_uvm.fits ! AN table 1: 8 integrations on 15 of 15 possible baselines. ! AN table 2: 7 integrations on 28 of 28 possible baselines. ! AN table 3: 5 integrations on 21 of 21 possible baselines. ! AN table 4: 3 integrations on 6 of 6 possible baselines. ! AN table 5: 3 integrations on 15 of 15 possible baselines. ! AN table 6: 4 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.794014 visibilities/baseline/integration-bin. ! Found source: J0639+7324 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 3608 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0639+7324_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.254631Jy sigma=48.062116 ! Fit after self-cal, rms=0.268369Jy sigma=10.608659 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8671 mas, bmaj=1.518 mas, bpa=84.15 degrees ! Estimated noise=0.454257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.567301 Jy ! Component: 100 - total flux cleaned = 0.70131 Jy ! Total flux subtracted in 100 components = 0.70131 Jy ! Clean residual min=-0.022352 max=0.052647 Jy/beam ! Clean residual mean=0.000220 rms=0.005677 Jy/beam ! Combined flux in latest and established models = 0.70131 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.70131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.132397Jy sigma=5.106822 ! Fit after self-cal, rms=0.132255Jy sigma=5.102411 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559981 Jy ! Component: 100 - total flux cleaned = 0.0717763 Jy ! Total flux subtracted in 100 components = 0.0717763 Jy ! Clean residual min=-0.020960 max=0.030427 Jy/beam ! Clean residual mean=0.000131 rms=0.004508 Jy/beam ! Combined flux in latest and established models = 0.773086 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 7 components and 0.773086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.098906Jy sigma=3.992792 ! Fit after self-cal, rms=0.098733Jy sigma=3.986999 ! Inverting map ! Added new window around map position (0, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225885 Jy ! Component: 100 - total flux cleaned = 0.0277622 Jy ! Total flux subtracted in 100 components = 0.0277622 Jy ! Clean residual min=-0.019158 max=0.018824 Jy/beam ! Clean residual mean=0.000099 rms=0.004065 Jy/beam ! Combined flux in latest and established models = 0.800848 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.800848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.090403Jy sigma=3.640886 ! Fit after self-cal, rms=0.090102Jy sigma=3.630648 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.11 mas, bmaj=1.87 mas, bpa=82.17 degrees ! Estimated noise=0.31347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189203 Jy ! Component: 100 - total flux cleaned = 0.0244107 Jy ! Component: 150 - total flux cleaned = 0.0256066 Jy ! Component: 200 - total flux cleaned = 0.0266324 Jy ! Total flux subtracted in 200 components = 0.0266324 Jy ! Clean residual min=-0.020069 max=0.018818 Jy/beam ! Clean residual mean=0.000100 rms=0.004269 Jy/beam ! Combined flux in latest and established models = 0.82748 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.82748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.084864Jy sigma=3.455369 ! Fit after self-cal, rms=0.084727Jy sigma=3.450517 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.11 x 1.87 at 82.17 degrees (North through East) ! Clean map min=-0.019463 max=0.75123 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 LA 1.00 MK 0.99 ! NL 1.06 PT 1.04 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 1.04 LA 1.00 ! MK 1.02 NL 0.97 OV 0.96 PT 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 0.98 HN 0.93 LA 0.98 ! OV 0.91 PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 LA 1.19 NL 1.35 OV 1.25 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 LA 1.00 MK 1.02 NL 1.05 ! OV 1.09 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.99 KP 1.00 LA 1.02 MK 0.99 ! NL 1.07 OV 1.10 PT 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 LA 1.00 MK 1.02 ! NL 1.09 PT 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 1.05 LA 1.00 ! MK 1.03 NL 0.97 OV 0.97 PT 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.87 FD 0.97 HN 0.96 LA 0.98 ! OV 0.91 PT 0.91 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 LA 1.15 NL 1.35 OV 1.26 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 LA 1.00 MK 1.01 NL 1.06 ! OV 1.10 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.02 KP 0.99 LA 1.01 MK 1.00 ! NL 1.09 OV 1.11 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 LA 1.01 MK 1.01 ! NL 1.06 PT 1.04 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 1.03 LA 1.00 ! MK 0.98 NL 0.97 OV 0.96 PT 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 0.98 HN 0.95 LA 0.98 ! OV 0.92 PT 0.91 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 LA 1.17 NL 1.30 OV 1.28 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 LA 1.01 MK 1.01 NL 1.06 ! OV 1.10 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00 KP 0.99 LA 1.02 MK 0.99 ! NL 1.08 OV 1.11 PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.02 LA 0.99 MK 0.97 ! NL 1.07 PT 1.04 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HN 1.03 LA 1.01 ! MK 0.97 NL 0.96 OV 0.96 PT 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 0.98 HN 0.95 LA 0.99 ! OV 0.93 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 LA 1.18 NL 1.35 OV 1.23 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 LA 0.99 MK 1.01 NL 1.08 ! OV 1.10 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.02 KP 0.99 LA 1.02 MK 0.98 ! NL 1.11 OV 1.09 PT 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.02 LA 1.00 MK 0.95 ! NL 1.05 PT 1.06 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.96 HN 1.07 LA 1.00 ! MK 1.03 NL 0.95 OV 0.98 PT 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.99 HN 0.97 LA 0.99 ! OV 0.91 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 LA 1.16 NL 1.38 OV 1.24 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 LA 1.00 MK 1.01 NL 1.07 ! OV 1.09 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00 KP 1.00 LA 1.02 MK 0.98 ! NL 1.08 OV 1.10 PT 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.03 LA 1.01 MK 0.97 ! NL 1.06 PT 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 1.03 LA 1.00 ! MK 1.06 NL 0.96 OV 0.95 PT 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.99 HN 0.96 LA 0.99 ! OV 0.92 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 LA 1.14 NL 1.40 OV 1.24 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 LA 1.00 MK 1.01 NL 1.07 ! OV 1.10 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 KP 1.00 LA 1.01 MK 0.99 ! NL 1.09 OV 1.09 PT 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.02 LA 1.01 MK 0.98 ! NL 1.05 PT 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 1.07 LA 1.00 ! MK 1.05 NL 0.96 OV 0.97 PT 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.99 HN 0.97 LA 0.98 ! OV 0.91 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 LA 1.13 NL 1.37 OV 1.25 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 LA 1.00 MK 1.01 NL 1.07 ! OV 1.09 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.99 KP 0.99 LA 1.02 MK 0.98 ! NL 1.10 OV 1.09 PT 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.02 LA 0.98 MK 1.00 ! NL 1.06 PT 1.03 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.97 HN 1.05 LA 0.99 ! MK 1.02 NL 0.95 OV 0.97 PT 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.99 HN 0.96 LA 0.98 ! OV 0.93 PT 0.90 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 LA 1.10 NL 1.37 OV 1.23 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 LA 1.00 MK 1.01 NL 1.07 ! OV 1.10 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.99 KP 0.99 LA 1.02 MK 0.98 ! NL 1.08 OV 1.09 PT 0.92 ! ! ! Fit before self-cal, rms=0.084727Jy sigma=3.450517 ! Fit after self-cal, rms=0.030182Jy sigma=1.065384 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.828 mas, bpa=82.09 degrees ! Estimated noise=0.316594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463631 Jy ! Component: 100 - total flux cleaned = 0.00679765 Jy ! Component: 150 - total flux cleaned = 0.00850049 Jy ! Component: 200 - total flux cleaned = 0.00934808 Jy ! Total flux subtracted in 200 components = 0.00934808 Jy ! Clean residual min=-0.003741 max=0.004075 Jy/beam ! Clean residual mean=0.000026 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.836828 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.836828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027169Jy sigma=0.947693 ! Fit after self-cal, rms=0.026950Jy sigma=0.939406 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026950Jy sigma=0.939406 ! Fit after self-cal, rms=0.026187Jy sigma=0.917150 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=1.825 mas, bpa=82.13 degrees ! Estimated noise=0.316745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215405 Jy ! Component: 100 - total flux cleaned = 0.00355418 Jy ! Component: 150 - total flux cleaned = 0.00435931 Jy ! Component: 200 - total flux cleaned = 0.00465179 Jy ! Total flux subtracted in 200 components = 0.00465179 Jy ! Clean residual min=-0.003227 max=0.003712 Jy/beam ! Clean residual mean=0.000021 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.84148 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.84148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024888Jy sigma=0.868184 ! Fit after self-cal, rms=0.024833Jy sigma=0.865922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359556 Jy ! Component: 100 - total flux cleaned = 0.0044679 Jy ! Component: 150 - total flux cleaned = 0.00478837 Jy ! Component: 200 - total flux cleaned = 0.00522553 Jy ! Total flux subtracted in 200 components = 0.00522553 Jy ! Clean residual min=-0.003050 max=0.002811 Jy/beam ! Clean residual mean=0.000015 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.846706 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 66 components and 0.846706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024065Jy sigma=0.837982 ! Fit after self-cal, rms=0.024014Jy sigma=0.836090 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024014Jy sigma=0.836090 ! Fit after self-cal, rms=0.023286Jy sigma=0.813651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.821 mas, bpa=82.08 degrees ! Estimated noise=0.316891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021823 Jy ! Component: 100 - total flux cleaned = 0.00299089 Jy ! Component: 150 - total flux cleaned = 0.00337111 Jy ! Component: 200 - total flux cleaned = 0.00371383 Jy ! Total flux subtracted in 200 components = 0.00371383 Jy ! Clean residual min=-0.002678 max=0.002579 Jy/beam ! Clean residual mean=0.000009 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.85042 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.85042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022652Jy sigma=0.790114 ! Fit after self-cal, rms=0.022632Jy sigma=0.789458 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559078 Jy ! Component: 100 - total flux cleaned = 0.00091956 Jy ! Component: 150 - total flux cleaned = 0.0011357 Jy ! Component: 200 - total flux cleaned = 0.00128724 Jy ! Total flux subtracted in 200 components = 0.00128724 Jy ! Clean residual min=-0.002622 max=0.002321 Jy/beam ! Clean residual mean=0.000008 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.851707 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.851707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022370Jy sigma=0.779462 ! Fit after self-cal, rms=0.022358Jy sigma=0.779124 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022358Jy sigma=0.779124 ! Fit after self-cal, rms=0.022061Jy sigma=0.771563 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=3.69 mas, bpa=63.29 degrees ! Estimated noise=0.385565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210657 Jy ! Component: 100 - total flux cleaned = 0.00344673 Jy ! Component: 150 - total flux cleaned = 0.00397203 Jy ! Component: 200 - total flux cleaned = 0.00435119 Jy ! Total flux subtracted in 200 components = 0.00435119 Jy ! Clean residual min=-0.002249 max=0.002254 Jy/beam ! Clean residual mean=0.000011 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.856058 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.856058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021859Jy sigma=0.762745 ! Fit after self-cal, rms=0.021833Jy sigma=0.762152 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596057 Jy ! Component: 100 - total flux cleaned = 0.000834584 Jy ! Component: 150 - total flux cleaned = 0.0010166 Jy ! Component: 200 - total flux cleaned = 0.00115251 Jy ! Total flux subtracted in 200 components = 0.00115251 Jy ! Clean residual min=-0.002237 max=0.002098 Jy/beam ! Clean residual mean=0.000008 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.857211 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.857211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021781Jy sigma=0.759737 ! Fit after self-cal, rms=0.021773Jy sigma=0.759576 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.818 mas, bpa=82.04 degrees ! Estimated noise=0.317028 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.105 x 1.818 at 82.04 degrees (North through East) ! Clean map min=-0.0021819 max=0.74662 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021773Jy sigma=0.759576 ! Fit after self-cal, rms=0.020257Jy sigma=0.702997 ! Inverting map and beam ! Estimated beam: bmin=1.104 mas, bmaj=1.816 mas, bpa=82.06 degrees ! Estimated noise=0.317372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172381 Jy ! Component: 100 - total flux cleaned = 0.00166579 Jy ! Component: 150 - total flux cleaned = 0.00166313 Jy ! Component: 200 - total flux cleaned = 0.00175972 Jy ! Total flux subtracted in 200 components = 0.00175972 Jy ! Clean residual min=-0.002182 max=0.002042 Jy/beam ! Clean residual mean=0.000005 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.85897 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 0.85897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.019895Jy sigma=0.689514 ! Fit after self-cal, rms=0.019891Jy sigma=0.689341 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189766 Jy ! Component: 100 - total flux cleaned = 0.000190088 Jy ! Component: 150 - total flux cleaned = 0.00022916 Jy ! Component: 200 - total flux cleaned = 0.000228942 Jy ! Total flux subtracted in 200 components = 0.000228942 Jy ! Clean residual min=-0.002127 max=0.001974 Jy/beam ! Clean residual mean=0.000005 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.859199 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.859199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.019755Jy sigma=0.683879 ! Fit after self-cal, rms=0.019751Jy sigma=0.683722 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.019751Jy sigma=0.683722 ! Fit after self-cal, rms=0.019556Jy sigma=0.678594 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=1.465 mas, bpa=83.39 degrees ! Estimated noise=0.461902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.566235 Jy ! Component: 100 - total flux cleaned = 0.700081 Jy ! Component: 150 - total flux cleaned = 0.756341 Jy ! Component: 200 - total flux cleaned = 0.784197 Jy ! Total flux subtracted in 200 components = 0.784197 Jy ! Clean residual min=-0.005960 max=0.016175 Jy/beam ! Clean residual mean=0.000086 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.784197 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.784197 Jy ! Inverting map and beam ! Estimated beam: bmin=1.104 mas, bmaj=1.813 mas, bpa=82.02 degrees ! Estimated noise=0.317433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232689 Jy ! Component: 100 - total flux cleaned = 0.0369263 Jy ! Component: 150 - total flux cleaned = 0.0462981 Jy ! Component: 200 - total flux cleaned = 0.0532244 Jy ! Total flux subtracted in 200 components = 0.0532244 Jy ! Clean residual min=-0.003110 max=0.004466 Jy/beam ! Clean residual mean=0.000040 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.837421 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 0.837421 Jy ! Inverting map ! Added new window around map position (-0.2, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548776 Jy ! Component: 100 - total flux cleaned = 0.0098216 Jy ! Component: 150 - total flux cleaned = 0.0131726 Jy ! Component: 200 - total flux cleaned = 0.0148203 Jy ! Total flux subtracted in 200 components = 0.0148203 Jy ! Clean residual min=-0.002502 max=0.002350 Jy/beam ! Clean residual mean=0.000016 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.852242 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 67 components and 0.852242 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=3.682 mas, bpa=63.2 degrees ! Estimated noise=0.386719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324647 Jy ! Component: 100 - total flux cleaned = 0.00547197 Jy ! Component: 150 - total flux cleaned = 0.00685401 Jy ! Component: 200 - total flux cleaned = 0.00743063 Jy ! Total flux subtracted in 200 components = 0.00743063 Jy ! Clean residual min=-0.001987 max=0.002244 Jy/beam ! Clean residual mean=0.000009 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.859672 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316965 Jy ! Component: 100 - total flux cleaned = 0.000521923 Jy ! Component: 150 - total flux cleaned = 0.000707024 Jy ! Component: 200 - total flux cleaned = 0.000874776 Jy ! Total flux subtracted in 200 components = 0.000874776 Jy ! Clean residual min=-0.001939 max=0.002168 Jy/beam ! Clean residual mean=0.000007 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.860547 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 113 components and 0.860547 Jy ! Inverting map ! Added new window around map position (-33.2, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183485 Jy ! Component: 100 - total flux cleaned = 0.00201243 Jy ! Component: 150 - total flux cleaned = 0.00223741 Jy ! Component: 200 - total flux cleaned = 0.00247187 Jy ! Total flux subtracted in 200 components = 0.00247187 Jy ! Clean residual min=-0.001776 max=0.001798 Jy/beam ! Clean residual mean=0.000006 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.863019 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 143 components and 0.863019 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.104 mas, bmaj=1.813 mas, bpa=82.02 degrees ! Estimated noise=0.317433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000480281 Jy ! Component: 100 - total flux cleaned = -0.000608081 Jy ! Component: 150 - total flux cleaned = -0.00044454 Jy ! Component: 200 - total flux cleaned = -0.000342225 Jy ! Total flux subtracted in 200 components = -0.000342225 Jy ! Clean residual min=-0.002142 max=0.001853 Jy/beam ! Clean residual mean=0.000005 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.862677 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 161 components and 0.862677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.019264Jy sigma=0.667553 ! Fit after self-cal, rms=0.019031Jy sigma=0.657778 wmodel J0639+7324_X_map.mod ! Writing 161 model components to file: J0639+7324_X_map.mod wobs J0639+7324_X_uvs.fits ! Writing UV FITS file: J0639+7324_X_uvs.fits wwins J0639+7324_X_map.win ! wwins: Wrote 7 windows to J0639+7324_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000684501 Jy ! Component: 100 - total flux cleaned = -0.000655291 Jy ! Component: 150 - total flux cleaned = -0.000569326 Jy ! Component: 200 - total flux cleaned = -0.000486254 Jy ! Component: 250 - total flux cleaned = -0.000299438 Jy ! Component: 300 - total flux cleaned = -0.000273547 Jy ! Component: 350 - total flux cleaned = -9.60067e-05 Jy ! Component: 400 - total flux cleaned = 5.21287e-05 Jy ! Component: 450 - total flux cleaned = 0.000220657 Jy ! Component: 500 - total flux cleaned = 0.000362059 Jy ! Component: 550 - total flux cleaned = 0.000500714 Jy ! Component: 600 - total flux cleaned = 0.000613621 Jy ! Component: 650 - total flux cleaned = 0.000724772 Jy ! Component: 700 - total flux cleaned = 0.000811958 Jy ! Component: 750 - total flux cleaned = 0.000876362 Jy ! Component: 800 - total flux cleaned = 0.00085558 Jy ! Component: 850 - total flux cleaned = 0.000918052 Jy ! Component: 900 - total flux cleaned = 0.000958619 Jy ! Component: 950 - total flux cleaned = 0.00093789 Jy ! Component: 1000 - total flux cleaned = 0.000937829 Jy ! Component: 1050 - total flux cleaned = 0.000918218 Jy ! Component: 1100 - total flux cleaned = 0.000879918 Jy ! Component: 1150 - total flux cleaned = 0.00087982 Jy ! Component: 1200 - total flux cleaned = 0.000879609 Jy ! Component: 1250 - total flux cleaned = 0.000805749 Jy ! Component: 1300 - total flux cleaned = 0.000824313 Jy ! Component: 1350 - total flux cleaned = 0.000878303 Jy ! Component: 1400 - total flux cleaned = 0.000860386 Jy ! Component: 1450 - total flux cleaned = 0.000877975 Jy ! Component: 1500 - total flux cleaned = 0.000929586 Jy ! Component: 1550 - total flux cleaned = 0.000895683 Jy ! Component: 1600 - total flux cleaned = 0.000963271 Jy ! Component: 1650 - total flux cleaned = 0.000880169 Jy ! Component: 1700 - total flux cleaned = 0.000995077 Jy ! Component: 1750 - total flux cleaned = 0.000979058 Jy ! Component: 1800 - total flux cleaned = 0.000978924 Jy ! Component: 1850 - total flux cleaned = 0.00107359 Jy ! Component: 1900 - total flux cleaned = 0.000979578 Jy ! Component: 1950 - total flux cleaned = 0.00107202 Jy ! Component: 2000 - total flux cleaned = 0.00101058 Jy ! Component: 2050 - total flux cleaned = 0.000980431 Jy ! Component: 2100 - total flux cleaned = 0.00105505 Jy ! Component: 2150 - total flux cleaned = 0.00103987 Jy ! Component: 2200 - total flux cleaned = 0.00102523 Jy ! Component: 2250 - total flux cleaned = 0.000996548 Jy ! Component: 2300 - total flux cleaned = 0.00105365 Jy ! Component: 2350 - total flux cleaned = 0.000997143 Jy ! Component: 2400 - total flux cleaned = 0.000969134 Jy ! Component: 2450 - total flux cleaned = 0.000983048 Jy ! Component: 2500 - total flux cleaned = 0.00102425 Jy ! Component: 2550 - total flux cleaned = 0.00101089 Jy ! Component: 2600 - total flux cleaned = 0.000957227 Jy ! Component: 2650 - total flux cleaned = 0.000930573 Jy ! Component: 2700 - total flux cleaned = 0.000904229 Jy ! Component: 2750 - total flux cleaned = 0.000917239 Jy ! Component: 2800 - total flux cleaned = 0.000929951 Jy ! Component: 2850 - total flux cleaned = 0.000917098 Jy ! Component: 2900 - total flux cleaned = 0.000904342 Jy ! Component: 2950 - total flux cleaned = 0.000916891 Jy ! Component: 3000 - total flux cleaned = 0.000904731 Jy ! Component: 3050 - total flux cleaned = 0.000892557 Jy ! Component: 3100 - total flux cleaned = 0.00089264 Jy ! Component: 3150 - total flux cleaned = 0.000904825 Jy ! Component: 3200 - total flux cleaned = 0.000892865 Jy ! Component: 3250 - total flux cleaned = 0.000892931 Jy ! Component: 3300 - total flux cleaned = 0.000916525 Jy ! Component: 3350 - total flux cleaned = 0.0009049 Jy ! Component: 3400 - total flux cleaned = 0.000904912 Jy ! Component: 3450 - total flux cleaned = 0.000927831 Jy ! Component: 3500 - total flux cleaned = 0.000939189 Jy ! Component: 3550 - total flux cleaned = 0.000961626 Jy ! Component: 3600 - total flux cleaned = 0.000983724 Jy ! Component: 3650 - total flux cleaned = 0.00095044 Jy ! Component: 3700 - total flux cleaned = 0.000983414 Jy ! Component: 3750 - total flux cleaned = 0.00100532 Jy ! Component: 3800 - total flux cleaned = 0.00102691 Jy ! Component: 3850 - total flux cleaned = 0.0010056 Jy ! Component: 3900 - total flux cleaned = 0.00103754 Jy ! Component: 3950 - total flux cleaned = 0.0010165 Jy ! Component: 4000 - total flux cleaned = 0.00106873 Jy ! Component: 4050 - total flux cleaned = 0.00104789 Jy ! Total flux subtracted in 4096 components = 0.00104797 Jy ! Clean residual min=-0.000626 max=0.000614 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.863725 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 463 components and 0.863724 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0639+7324_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.104 x 1.813 at 82.02 degrees (North through East) ! Clean map min=-0.0016676 max=0.74339 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0639+7324_X_map.fits wmodel /vlbi/sb072/temp_maps//J0639+7324_X_map.mod ! Writing 463 model components to file: /vlbi/sb072/temp_maps//J0639+7324_X_map.mod wobs /vlbi/sb072/temp_maps//J0639+7324_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0639+7324_X_uvs.fits wwins /vlbi/sb072/temp_maps//J0639+7324_X_map.win ! wwins: Wrote 8 windows to /vlbi/sb072/temp_maps//J0639+7324_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.743395 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182219 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0735352 0.0735352 0.14707 0.294141 0.588281 1.17656 2.35313 4.70625 9.4125 18.825 37.65 75.3 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.743 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4079.68 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0639+7324_X_dfm.log closed on Tue Mar 5 22:43:40 2019