! Started logfile: /vlbi/sb072/temp_maps//J0639+7324_C_dfm.log on Tue Mar 5 22:43:29 2019 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/sb072/temp_maps//J0639+7324_C_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0639+7324_C_uvm.fits ! AN table 1: 8 integrations on 15 of 15 possible baselines. ! AN table 2: 7 integrations on 28 of 28 possible baselines. ! AN table 3: 5 integrations on 21 of 21 possible baselines. ! AN table 4: 3 integrations on 6 of 6 possible baselines. ! AN table 5: 3 integrations on 15 of 15 possible baselines. ! AN table 6: 4 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.794014 visibilities/baseline/integration-bin. ! Found source: J0639+7324 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 3608 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J0639+7324_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.282635Jy sigma=53.911483 ! Fit after self-cal, rms=0.265665Jy sigma=11.464612 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.536 mas, bmaj=2.681 mas, bpa=83.27 degrees ! Estimated noise=0.434266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.583145 Jy ! Component: 100 - total flux cleaned = 0.715677 Jy ! Total flux subtracted in 100 components = 0.715677 Jy ! Clean residual min=-0.026072 max=0.048717 Jy/beam ! Clean residual mean=-0.000006 rms=0.005684 Jy/beam ! Combined flux in latest and established models = 0.715677 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.715677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160915Jy sigma=6.159246 ! Fit after self-cal, rms=0.160862Jy sigma=6.158438 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468663 Jy ! Component: 100 - total flux cleaned = 0.0493734 Jy ! Total flux subtracted in 100 components = 0.0493734 Jy ! Clean residual min=-0.024628 max=0.035692 Jy/beam ! Clean residual mean=-0.000003 rms=0.004877 Jy/beam ! Combined flux in latest and established models = 0.76505 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.76505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.138833Jy sigma=5.375626 ! Fit after self-cal, rms=0.138547Jy sigma=5.367965 ! Inverting map ! Added new window around map position (-0.6, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246948 Jy ! Component: 100 - total flux cleaned = 0.0301515 Jy ! Total flux subtracted in 100 components = 0.0301515 Jy ! Clean residual min=-0.022558 max=0.030429 Jy/beam ! Clean residual mean=-0.000003 rms=0.004475 Jy/beam ! Combined flux in latest and established models = 0.795202 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.795202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.129702Jy sigma=5.033258 ! Fit after self-cal, rms=0.129494Jy sigma=5.016126 ! Inverting map ! Added new window around map position (-4.8, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195478 Jy ! Component: 100 - total flux cleaned = 0.0258322 Jy ! Total flux subtracted in 100 components = 0.0258322 Jy ! Clean residual min=-0.022733 max=0.025220 Jy/beam ! Clean residual mean=-0.000005 rms=0.004166 Jy/beam ! Combined flux in latest and established models = 0.821034 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.821034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.122777Jy sigma=4.764057 ! Fit after self-cal, rms=0.122369Jy sigma=4.739692 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.009 mas, bmaj=3.319 mas, bpa=79.8 degrees ! Estimated noise=0.294917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228841 Jy ! Component: 100 - total flux cleaned = 0.0356609 Jy ! Component: 150 - total flux cleaned = 0.0397221 Jy ! Component: 200 - total flux cleaned = 0.0432974 Jy ! Total flux subtracted in 200 components = 0.0432974 Jy ! Clean residual min=-0.023043 max=0.026314 Jy/beam ! Clean residual mean=0.000055 rms=0.005253 Jy/beam ! Combined flux in latest and established models = 0.864331 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.864331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.116033Jy sigma=4.535362 ! Fit after self-cal, rms=0.115712Jy sigma=4.516479 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.009 x 3.319 at 79.8 degrees (North through East) ! Clean map min=-0.022656 max=0.75524 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 LA 1.05 MK 1.09 ! NL 1.08 PT 0.94 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 1.02 HN 0.96 LA 1.08 ! MK 1.01 NL 1.09 OV 1.25 PT 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.91 HN 0.93 LA 1.02 ! OV 0.96 PT 0.89 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 LA 1.09 NL 1.05 OV 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 LA 1.01 MK 1.01 NL 1.12 ! OV 0.99 PT 0.89 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.92 KP 0.96 LA 1.01 MK 0.96 ! NL 1.12 OV 0.97 PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 LA 1.07 MK 1.06 ! NL 1.06 PT 0.93 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.04 HN 0.94 LA 1.09 ! MK 1.03 NL 1.09 OV 1.20 PT 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.91 HN 0.94 LA 1.02 ! OV 0.97 PT 0.90 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 LA 1.09 NL 1.04 OV 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 LA 1.00 MK 1.00 NL 1.11 ! OV 0.99 PT 0.89 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.92 KP 0.95 LA 1.01 MK 0.97 ! NL 1.12 OV 0.98 PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 LA 1.04 MK 1.05 ! NL 1.07 PT 0.93 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.04 HN 0.98 LA 1.11 ! MK 0.97 NL 1.19 OV 1.15 PT 1.08 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.91 HN 0.94 LA 1.01 ! OV 0.96 PT 0.87 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 LA 1.07 NL 1.05 OV 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 LA 1.02 MK 1.00 NL 1.09 ! OV 1.00 PT 0.86 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.93 KP 0.95 LA 1.02 MK 0.99 ! NL 1.09 OV 0.97 PT 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.78 LA 1.06 MK 1.07 ! NL 1.05 PT 0.92 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.27 FD 1.05 HN 0.89 LA 1.01 ! MK 1.01 NL 1.15 OV 1.16 PT 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.90 HN 0.90 LA 1.02 ! OV 0.96 PT 0.90 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 LA 1.07 NL 1.03 OV 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 LA 1.01 MK 0.99 NL 1.10 ! OV 0.98 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.93 KP 0.96 LA 1.01 MK 0.97 ! NL 1.09 OV 0.97 PT 0.89 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 LA 1.03 MK 1.03 ! NL 1.04 PT 0.91 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.06 HN 0.97 LA 1.14 ! MK 0.98 NL 1.12 OV 1.15 PT 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.92 HN 0.95 LA 1.01 ! OV 0.95 PT 0.87 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 LA 1.02 NL 1.02 OV 0.97 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 LA 1.00 MK 0.96 NL 1.09 ! OV 0.98 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.91 KP 0.94 LA 1.00 MK 0.96 ! NL 1.08 OV 0.98 PT 0.88 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.91 LA 1.02 MK 1.02 ! NL 1.01 PT 0.91 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 0.96 LA 1.15 ! MK 0.98 NL 1.14 OV 1.12 PT 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.90 HN 0.92 LA 1.01 ! OV 0.94 PT 0.88 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 LA 1.01 NL 1.01 OV 0.95 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 LA 1.00 MK 0.95 NL 1.08 ! OV 0.96 PT 0.89 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.90 KP 0.95 LA 1.01 MK 0.96 ! NL 1.07 OV 0.96 PT 0.87 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 LA 1.02 MK 1.01 ! NL 1.01 PT 0.91 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 0.98 LA 1.14 ! MK 0.98 NL 1.12 OV 1.12 PT 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.90 HN 0.93 LA 1.00 ! OV 0.93 PT 0.88 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 LA 1.01 NL 1.01 OV 0.95 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 LA 0.99 MK 0.95 NL 1.08 ! OV 0.97 PT 0.89 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.89 KP 0.94 LA 1.00 MK 0.95 ! NL 1.07 OV 0.95 PT 0.89 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.91 LA 1.02 MK 1.01 ! NL 1.01 PT 0.91 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.02 HN 0.97 LA 1.15 ! MK 0.97 NL 1.12 OV 1.12 PT 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.89 HN 0.93 LA 1.01 ! OV 0.94 PT 0.88 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 LA 1.00 NL 1.00 OV 0.95 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 LA 0.99 MK 0.95 NL 1.08 ! OV 0.97 PT 0.88 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.89 KP 0.94 LA 1.00 MK 0.96 ! NL 1.07 OV 0.96 PT 0.88 ! ! ! Fit before self-cal, rms=0.115712Jy sigma=4.516479 ! Fit after self-cal, rms=0.053316Jy sigma=1.958449 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.008 mas, bmaj=3.255 mas, bpa=80.05 degrees ! Estimated noise=0.29769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.1, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901079 Jy ! Component: 100 - total flux cleaned = 0.0131809 Jy ! Component: 150 - total flux cleaned = 0.0147587 Jy ! Component: 200 - total flux cleaned = 0.0163366 Jy ! Total flux subtracted in 200 components = 0.0163366 Jy ! Clean residual min=-0.008959 max=0.006999 Jy/beam ! Clean residual mean=-0.000001 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.880668 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 67 components and 0.880668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.047208Jy sigma=1.677024 ! Fit after self-cal, rms=0.046267Jy sigma=1.652293 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046267Jy sigma=1.652293 ! Fit after self-cal, rms=0.044686Jy sigma=1.577746 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.008 mas, bmaj=3.248 mas, bpa=80.02 degrees ! Estimated noise=0.297552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324039 Jy ! Component: 100 - total flux cleaned = 0.0045221 Jy ! Component: 150 - total flux cleaned = 0.00582298 Jy ! Component: 200 - total flux cleaned = 0.00712094 Jy ! Total flux subtracted in 200 components = 0.00712094 Jy ! Clean residual min=-0.007396 max=0.005800 Jy/beam ! Clean residual mean=-0.000010 rms=0.001381 Jy/beam ! Combined flux in latest and established models = 0.887789 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 84 components and 0.887789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042145Jy sigma=1.453458 ! Fit after self-cal, rms=0.041678Jy sigma=1.441309 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171952 Jy ! Component: 100 - total flux cleaned = 0.000503976 Jy ! Component: 150 - total flux cleaned = 0.001104 Jy ! Component: 200 - total flux cleaned = 0.00176939 Jy ! Total flux subtracted in 200 components = 0.00176939 Jy ! Clean residual min=-0.006897 max=0.005433 Jy/beam ! Clean residual mean=-0.000011 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.889558 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.889558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040544Jy sigma=1.385135 ! Fit after self-cal, rms=0.040289Jy sigma=1.380164 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040289Jy sigma=1.380164 ! Fit after self-cal, rms=0.033411Jy sigma=1.207348 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.007 mas, bmaj=3.238 mas, bpa=80.05 degrees ! Estimated noise=0.297402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648587 Jy ! Component: 100 - total flux cleaned = -0.000159527 Jy ! Component: 150 - total flux cleaned = 0.000388632 Jy ! Component: 200 - total flux cleaned = 0.000756685 Jy ! Total flux subtracted in 200 components = 0.000756685 Jy ! Clean residual min=-0.005636 max=0.005089 Jy/beam ! Clean residual mean=-0.000011 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.890315 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 103 components and 0.890315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032081Jy sigma=1.140706 ! Fit after self-cal, rms=0.031785Jy sigma=1.134214 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000686911 Jy ! Component: 100 - total flux cleaned = -0.000210975 Jy ! Component: 150 - total flux cleaned = 0.000204103 Jy ! Component: 200 - total flux cleaned = 0.000295919 Jy ! Total flux subtracted in 200 components = 0.000295919 Jy ! Clean residual min=-0.005372 max=0.004769 Jy/beam ! Clean residual mean=-0.000011 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.890611 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 0.890611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031131Jy sigma=1.099780 ! Fit after self-cal, rms=0.030976Jy sigma=1.096884 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030976Jy sigma=1.096884 ! Fit after self-cal, rms=0.030492Jy sigma=1.077117 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=6.625 mas, bpa=63.88 degrees ! Estimated noise=0.351291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475808 Jy ! Component: 100 - total flux cleaned = -0.000616129 Jy ! Component: 150 - total flux cleaned = -0.000419605 Jy ! Component: 200 - total flux cleaned = -0.000158569 Jy ! Total flux subtracted in 200 components = -0.000158569 Jy ! Clean residual min=-0.005258 max=0.005909 Jy/beam ! Clean residual mean=-0.000014 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.890452 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 123 components and 0.890452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030137Jy sigma=1.051432 ! Fit after self-cal, rms=0.029905Jy sigma=1.046316 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.1, 14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587808 Jy ! Component: 100 - total flux cleaned = 0.00816787 Jy ! Component: 150 - total flux cleaned = 0.00881983 Jy ! Component: 200 - total flux cleaned = 0.00911771 Jy ! Total flux subtracted in 200 components = 0.00911771 Jy ! Clean residual min=-0.004422 max=0.003419 Jy/beam ! Clean residual mean=-0.000023 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.89957 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 164 components and 0.89957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029072Jy sigma=0.993665 ! Fit after self-cal, rms=0.028789Jy sigma=0.987393 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.007 mas, bmaj=3.23 mas, bpa=80.03 degrees ! Estimated noise=0.297518 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.007 x 3.23 at 80.03 degrees (North through East) ! Clean map min=-0.0066572 max=0.75563 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028789Jy sigma=0.987393 ! Fit after self-cal, rms=0.027953Jy sigma=0.930808 ! Inverting map and beam ! Estimated beam: bmin=2.007 mas, bmaj=3.226 mas, bpa=80.1 degrees ! Estimated noise=0.297766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119672 Jy ! Component: 100 - total flux cleaned = 0.00231156 Jy ! Component: 150 - total flux cleaned = 0.00335539 Jy ! Component: 200 - total flux cleaned = 0.00372757 Jy ! Total flux subtracted in 200 components = 0.00372757 Jy ! Clean residual min=-0.003562 max=0.003179 Jy/beam ! Clean residual mean=-0.000014 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.903297 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 184 components and 0.903297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027036Jy sigma=0.884096 ! Fit after self-cal, rms=0.026888Jy sigma=0.880649 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.85875e-05 Jy ! Component: 100 - total flux cleaned = 0.000381192 Jy ! Component: 150 - total flux cleaned = 0.000543797 Jy ! Component: 200 - total flux cleaned = 0.00061868 Jy ! Total flux subtracted in 200 components = 0.00061868 Jy ! Clean residual min=-0.003327 max=0.002779 Jy/beam ! Clean residual mean=-0.000015 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.903916 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 192 components and 0.903916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026404Jy sigma=0.856745 ! Fit after self-cal, rms=0.026334Jy sigma=0.855201 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026334Jy sigma=0.855201 ! Fit after self-cal, rms=0.026086Jy sigma=0.843141 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.532 mas, bmaj=2.593 mas, bpa=83.05 degrees ! Estimated noise=0.436087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.582512 Jy ! Component: 100 - total flux cleaned = 0.714161 Jy ! Component: 150 - total flux cleaned = 0.764069 Jy ! Component: 200 - total flux cleaned = 0.789342 Jy ! Total flux subtracted in 200 components = 0.789342 Jy ! Clean residual min=-0.008671 max=0.015342 Jy/beam ! Clean residual mean=0.000008 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.789343 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.789343 Jy ! Inverting map and beam ! Estimated beam: bmin=2.006 mas, bmaj=3.221 mas, bpa=80.08 degrees ! Estimated noise=0.297852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281366 Jy ! Component: 100 - total flux cleaned = 0.047755 Jy ! Component: 150 - total flux cleaned = 0.0621164 Jy ! Component: 200 - total flux cleaned = 0.0730279 Jy ! Total flux subtracted in 200 components = 0.0730279 Jy ! Clean residual min=-0.005630 max=0.008806 Jy/beam ! Clean residual mean=0.000015 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.862371 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 0.862371 Jy ! Inverting map ! Added new window around map position (-9, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917739 Jy ! Component: 100 - total flux cleaned = 0.0161733 Jy ! Component: 150 - total flux cleaned = 0.0218971 Jy ! Component: 200 - total flux cleaned = 0.0261532 Jy ! Total flux subtracted in 200 components = 0.0261532 Jy ! Clean residual min=-0.003930 max=0.004098 Jy/beam ! Clean residual mean=-0.000005 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.888524 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 73 components and 0.888524 Jy ! Inverting map ! Added new window around map position (0.3, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331703 Jy ! Component: 100 - total flux cleaned = 0.00532745 Jy ! Component: 150 - total flux cleaned = 0.00688267 Jy ! Component: 200 - total flux cleaned = 0.00805914 Jy ! Total flux subtracted in 200 components = 0.00805914 Jy ! Clean residual min=-0.003413 max=0.003036 Jy/beam ! Clean residual mean=-0.000008 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.896583 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 96 components and 0.896583 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.327 mas, bmaj=6.617 mas, bpa=63.79 degrees ! Estimated noise=0.352094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347478 Jy ! Component: 100 - total flux cleaned = 0.00553992 Jy ! Component: 150 - total flux cleaned = 0.0067451 Jy ! Component: 200 - total flux cleaned = 0.00729819 Jy ! Total flux subtracted in 200 components = 0.00729819 Jy ! Clean residual min=-0.003068 max=0.002568 Jy/beam ! Clean residual mean=-0.000023 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.903881 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428979 Jy ! Component: 100 - total flux cleaned = 0.000650205 Jy ! Component: 150 - total flux cleaned = 0.000901462 Jy ! Component: 200 - total flux cleaned = 0.0011284 Jy ! Total flux subtracted in 200 components = 0.0011284 Jy ! Clean residual min=-0.002940 max=0.002403 Jy/beam ! Clean residual mean=-0.000023 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.90501 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 173 components and 0.90501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.006 mas, bmaj=3.221 mas, bpa=80.08 degrees ! Estimated noise=0.297852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105072 Jy ! Component: 100 - total flux cleaned = -0.00094803 Jy ! Component: 150 - total flux cleaned = -0.000950345 Jy ! Component: 200 - total flux cleaned = -0.000779294 Jy ! Total flux subtracted in 200 components = -0.000779294 Jy ! Clean residual min=-0.002796 max=0.002642 Jy/beam ! Clean residual mean=-0.000012 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.90423 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 187 components and 0.90423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025809Jy sigma=0.806881 ! Fit after self-cal, rms=0.025228Jy sigma=0.783648 wmodel J0639+7324_C_map.mod ! Writing 187 model components to file: J0639+7324_C_map.mod wobs J0639+7324_C_uvs.fits ! Writing UV FITS file: J0639+7324_C_uvs.fits wwins J0639+7324_C_map.win ! wwins: Wrote 8 windows to J0639+7324_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144077 Jy ! Component: 100 - total flux cleaned = -0.00027912 Jy ! Component: 150 - total flux cleaned = -0.000194479 Jy ! Component: 200 - total flux cleaned = -7.22403e-05 Jy ! Component: 250 - total flux cleaned = -3.23664e-05 Jy ! Component: 300 - total flux cleaned = 6.23776e-06 Jy ! Component: 350 - total flux cleaned = 4.32203e-05 Jy ! Component: 400 - total flux cleaned = 4.25651e-05 Jy ! Component: 450 - total flux cleaned = 6.34458e-06 Jy ! Component: 500 - total flux cleaned = -6.33078e-05 Jy ! Component: 550 - total flux cleaned = -2.87064e-05 Jy ! Component: 600 - total flux cleaned = 3.82484e-05 Jy ! Component: 650 - total flux cleaned = 0.000136954 Jy ! Component: 700 - total flux cleaned = 0.000266198 Jy ! Component: 750 - total flux cleaned = 0.000393413 Jy ! Component: 800 - total flux cleaned = 0.000455961 Jy ! Component: 850 - total flux cleaned = 0.000548575 Jy ! Component: 900 - total flux cleaned = 0.000670738 Jy ! Component: 950 - total flux cleaned = 0.000821173 Jy ! Component: 1000 - total flux cleaned = 0.000939141 Jy ! Component: 1050 - total flux cleaned = 0.00102703 Jy ! Component: 1100 - total flux cleaned = 0.00114252 Jy ! Component: 1150 - total flux cleaned = 0.00122826 Jy ! Component: 1200 - total flux cleaned = 0.00131252 Jy ! Component: 1250 - total flux cleaned = 0.00136803 Jy ! Component: 1300 - total flux cleaned = 0.00142301 Jy ! Component: 1350 - total flux cleaned = 0.00155904 Jy ! Component: 1400 - total flux cleaned = 0.00163942 Jy ! Component: 1450 - total flux cleaned = 0.00169233 Jy ! Component: 1500 - total flux cleaned = 0.00177088 Jy ! Component: 1550 - total flux cleaned = 0.00182268 Jy ! Component: 1600 - total flux cleaned = 0.0018226 Jy ! Component: 1650 - total flux cleaned = 0.00174679 Jy ! Component: 1700 - total flux cleaned = 0.00189813 Jy ! Component: 1750 - total flux cleaned = 0.00189748 Jy ! Component: 1800 - total flux cleaned = 0.00187322 Jy ! Component: 1850 - total flux cleaned = 0.00189791 Jy ! Component: 1900 - total flux cleaned = 0.0019457 Jy ! Component: 1950 - total flux cleaned = 0.00192153 Jy ! Component: 2000 - total flux cleaned = 0.0019451 Jy ! Component: 2050 - total flux cleaned = 0.00196879 Jy ! Component: 2100 - total flux cleaned = 0.00196869 Jy ! Component: 2150 - total flux cleaned = 0.00201456 Jy ! Component: 2200 - total flux cleaned = 0.00196878 Jy ! Component: 2250 - total flux cleaned = 0.00194634 Jy ! Component: 2300 - total flux cleaned = 0.00194655 Jy ! Component: 2350 - total flux cleaned = 0.00199157 Jy ! Component: 2400 - total flux cleaned = 0.00196957 Jy ! Component: 2450 - total flux cleaned = 0.00186034 Jy ! Component: 2500 - total flux cleaned = 0.00186028 Jy ! Component: 2550 - total flux cleaned = 0.00181759 Jy ! Component: 2600 - total flux cleaned = 0.00177531 Jy ! Component: 2650 - total flux cleaned = 0.0019022 Jy ! Component: 2700 - total flux cleaned = 0.00181815 Jy ! Component: 2750 - total flux cleaned = 0.00179728 Jy ! Component: 2800 - total flux cleaned = 0.00185927 Jy ! Component: 2850 - total flux cleaned = 0.00185941 Jy ! Component: 2900 - total flux cleaned = 0.00187979 Jy ! Component: 2950 - total flux cleaned = 0.00190013 Jy ! Component: 3000 - total flux cleaned = 0.00188003 Jy ! Component: 3050 - total flux cleaned = 0.00187983 Jy ! Component: 3100 - total flux cleaned = 0.00184053 Jy ! Component: 3150 - total flux cleaned = 0.00189939 Jy ! Component: 3200 - total flux cleaned = 0.00184097 Jy ! Component: 3250 - total flux cleaned = 0.00186046 Jy ! Component: 3300 - total flux cleaned = 0.00191773 Jy ! Component: 3350 - total flux cleaned = 0.00191773 Jy ! Component: 3400 - total flux cleaned = 0.00195555 Jy ! Component: 3450 - total flux cleaned = 0.00191799 Jy ! Component: 3500 - total flux cleaned = 0.00191811 Jy ! Component: 3550 - total flux cleaned = 0.00191821 Jy ! Component: 3600 - total flux cleaned = 0.00191818 Jy ! Component: 3650 - total flux cleaned = 0.00191851 Jy ! Component: 3700 - total flux cleaned = 0.00193671 Jy ! Component: 3750 - total flux cleaned = 0.00191878 Jy ! Component: 3800 - total flux cleaned = 0.00193676 Jy ! Component: 3850 - total flux cleaned = 0.00190114 Jy ! Component: 3900 - total flux cleaned = 0.00195413 Jy ! Component: 3950 - total flux cleaned = 0.00186644 Jy ! Component: 4000 - total flux cleaned = 0.00191881 Jy ! Component: 4050 - total flux cleaned = 0.00190157 Jy ! Total flux subtracted in 4096 components = 0.00191888 Jy ! Clean residual min=-0.000859 max=0.000914 Jy/beam ! Clean residual mean=-0.000004 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.906149 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 486 components and 0.90615 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0639+7324_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.006 x 3.221 at 80.08 degrees (North through East) ! Clean map min=-0.0022594 max=0.75616 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0639+7324_C_map.fits wmodel /vlbi/sb072/temp_maps//J0639+7324_C_map.mod ! Writing 486 model components to file: /vlbi/sb072/temp_maps//J0639+7324_C_map.mod wobs /vlbi/sb072/temp_maps//J0639+7324_C_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0639+7324_C_uvs.fits wwins /vlbi/sb072/temp_maps//J0639+7324_C_map.win ! wwins: Wrote 9 windows to /vlbi/sb072/temp_maps//J0639+7324_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.756155 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319585 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.126794 0.126794 0.253587 0.507174 1.01435 2.0287 4.05739 8.11478 16.2296 32.4591 64.9183 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.756 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2366.05 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0639+7324_C_dfm.log closed on Tue Mar 5 22:43:34 2019