! Started logfile: /vlbi/sb072/temp_maps//J0442-0017_X_dfm.log on Fri Jan 25 19:16:13 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J0442-0017_X_uva.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0442-0017_X_uva.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.684848 visibilities/baseline/integration-bin. ! Found source: J0442-0017 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 2712 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0442-0017_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.378337Jy sigma=42.709138 ! Fit after self-cal, rms=0.393673Jy sigma=11.402959 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.721 mas, bmaj=1.815 mas, bpa=0.09617 degrees ! Estimated noise=0.659305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.657239 Jy ! Component: 100 - total flux cleaned = 0.909572 Jy ! Total flux subtracted in 100 components = 0.909572 Jy ! Clean residual min=-0.051996 max=0.116761 Jy/beam ! Clean residual mean=-0.000021 rms=0.016331 Jy/beam ! Combined flux in latest and established models = 0.909572 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.909572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.296128Jy sigma=8.962453 ! Fit after self-cal, rms=0.293048Jy sigma=8.886815 ! Inverting map ! Added new window around map position (0.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143284 Jy ! Component: 100 - total flux cleaned = 0.232086 Jy ! Total flux subtracted in 100 components = 0.232086 Jy ! Clean residual min=-0.036998 max=0.051103 Jy/beam ! Clean residual mean=0.000007 rms=0.009554 Jy/beam ! Combined flux in latest and established models = 1.14166 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 1.14166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.174242Jy sigma=5.255507 ! Fit after self-cal, rms=0.172231Jy sigma=5.205139 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9117 mas, bmaj=2.136 mas, bpa=-0.3034 degrees ! Estimated noise=0.458398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.080249 Jy ! Component: 100 - total flux cleaned = 0.123664 Jy ! Component: 150 - total flux cleaned = 0.148485 Jy ! Component: 200 - total flux cleaned = 0.156536 Jy ! Total flux subtracted in 200 components = 0.156536 Jy ! Clean residual min=-0.035388 max=0.046176 Jy/beam ! Clean residual mean=0.000039 rms=0.008865 Jy/beam ! Combined flux in latest and established models = 1.29819 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 1.29819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.128100Jy sigma=4.017728 ! Fit after self-cal, rms=0.126670Jy sigma=3.979445 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9117 x 2.136 at -0.3034 degrees (North through East) ! Clean map min=-0.030531 max=0.88844 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.87 KP 0.97 ! LA 1.09 MK 1.02 NL 1.14 OV 0.95 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 0.83 KP 0.90 ! LA 1.10 MK 1.00 NL 1.10 OV 0.93 ! PT 0.89 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.95 HN 0.82 KP 0.92 ! LA 1.10 MK 1.00 NL 1.08 OV 0.94 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.87 KP 0.95 ! LA 1.09 MK 1.05 NL 1.16 OV 0.97 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.90 KP 0.98 ! LA 1.13 MK 1.02 NL 1.20 OV 0.98 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.07 HN 0.92 KP 1.03 ! LA 1.13 MK 1.12 NL 1.20 OV 1.02 ! PT 0.96 SC 1.09 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.92 KP 0.99 ! LA 1.12 MK 1.12 NL 1.19 OV 0.99 ! PT 0.97 SC 1.09 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.90 KP 0.97 ! LA 1.13 MK 1.08 NL 1.17 OV 0.97 ! PT 0.93 SC 1.07 ! ! ! Fit before self-cal, rms=0.126670Jy sigma=3.979445 ! Fit after self-cal, rms=0.043207Jy sigma=1.175207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9155 mas, bmaj=2.14 mas, bpa=-0.3253 degrees ! Estimated noise=0.453322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00747736 Jy ! Component: 100 - total flux cleaned = 0.00742214 Jy ! Component: 150 - total flux cleaned = 0.00802456 Jy ! Component: 200 - total flux cleaned = 0.00819278 Jy ! Total flux subtracted in 200 components = 0.00819278 Jy ! Clean residual min=-0.006920 max=0.009889 Jy/beam ! Clean residual mean=0.000002 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 1.30639 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 1.30639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039281Jy sigma=1.045907 ! Fit after self-cal, rms=0.038368Jy sigma=1.016984 ! Inverting map ! Added new window around map position (-0.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293969 Jy ! Component: 100 - total flux cleaned = 0.00223341 Jy ! Component: 150 - total flux cleaned = 0.00167776 Jy ! Component: 200 - total flux cleaned = 0.00122163 Jy ! Total flux subtracted in 200 components = 0.00122163 Jy ! Clean residual min=-0.005567 max=0.006713 Jy/beam ! Clean residual mean=0.000003 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 1.30761 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 1.30761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035511Jy sigma=0.930657 ! Fit after self-cal, rms=0.035265Jy sigma=0.922622 ! Inverting map ! Added new window around map position (6.6, -27.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294728 Jy ! Component: 100 - total flux cleaned = 0.00293259 Jy ! Component: 150 - total flux cleaned = 0.00334057 Jy ! Component: 200 - total flux cleaned = 0.00382971 Jy ! Total flux subtracted in 200 components = 0.00382971 Jy ! Clean residual min=-0.004807 max=0.005126 Jy/beam ! Clean residual mean=0.000002 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 1.31144 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 1.31144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033524Jy sigma=0.869952 ! Fit after self-cal, rms=0.033453Jy sigma=0.868022 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033453Jy sigma=0.868022 ! Fit after self-cal, rms=0.032782Jy sigma=0.847744 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9146 mas, bmaj=2.139 mas, bpa=-0.409 degrees ! Estimated noise=0.452239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150519 Jy ! Component: 100 - total flux cleaned = 0.00173131 Jy ! Component: 150 - total flux cleaned = 0.00153368 Jy ! Component: 200 - total flux cleaned = 0.00135247 Jy ! Total flux subtracted in 200 components = 0.00135247 Jy ! Clean residual min=-0.004360 max=0.004631 Jy/beam ! Clean residual mean=-0.000001 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 1.31279 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 1.31279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032019Jy sigma=0.823709 ! Fit after self-cal, rms=0.031977Jy sigma=0.822404 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361517 Jy ! Component: 100 - total flux cleaned = 0.00432573 Jy ! Component: 150 - total flux cleaned = 0.00472846 Jy ! Component: 200 - total flux cleaned = 0.00508647 Jy ! Total flux subtracted in 200 components = 0.00508647 Jy ! Clean residual min=-0.003646 max=0.003891 Jy/beam ! Clean residual mean=0.000001 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 1.31788 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 1.31788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031041Jy sigma=0.791195 ! Fit after self-cal, rms=0.031022Jy sigma=0.790607 ! Inverting map ! Added new window around map position (-0.2, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129632 Jy ! Component: 100 - total flux cleaned = 0.00219225 Jy ! Component: 150 - total flux cleaned = 0.00309956 Jy ! Component: 200 - total flux cleaned = 0.00377109 Jy ! Total flux subtracted in 200 components = 0.00377109 Jy ! Clean residual min=-0.003018 max=0.003192 Jy/beam ! Clean residual mean=0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 1.32165 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 1.32165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030333Jy sigma=0.767798 ! Fit after self-cal, rms=0.030320Jy sigma=0.767459 ! Inverting map ! Added new window around map position (17.8, -35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127104 Jy ! Component: 100 - total flux cleaned = 0.00205328 Jy ! Component: 150 - total flux cleaned = 0.002056 Jy ! Component: 200 - total flux cleaned = 0.00223675 Jy ! Total flux subtracted in 200 components = 0.00223675 Jy ! Clean residual min=-0.002585 max=0.002882 Jy/beam ! Clean residual mean=0.000002 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 1.32388 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 128 components and 1.32388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029903Jy sigma=0.754365 ! Fit after self-cal, rms=0.029889Jy sigma=0.753972 ! Inverting map ! Added new window around map position (2, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135193 Jy ! Component: 100 - total flux cleaned = 0.0015629 Jy ! Component: 150 - total flux cleaned = 0.00192376 Jy ! Component: 200 - total flux cleaned = 0.002204 Jy ! Total flux subtracted in 200 components = 0.002204 Jy ! Clean residual min=-0.002441 max=0.002586 Jy/beam ! Clean residual mean=0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 1.32609 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 147 components and 1.32609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029532Jy sigma=0.742718 ! Fit after self-cal, rms=0.029527Jy sigma=0.742486 ! Inverting map ! Added new window around map position (-30.6, 25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130971 Jy ! Component: 100 - total flux cleaned = 0.00212716 Jy ! Component: 150 - total flux cleaned = 0.00238638 Jy ! Component: 200 - total flux cleaned = 0.00272718 Jy ! Total flux subtracted in 200 components = 0.00272718 Jy ! Clean residual min=-0.002370 max=0.002284 Jy/beam ! Clean residual mean=-0.000000 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 1.32882 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 162 components and 1.32882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029256Jy sigma=0.733349 ! Fit after self-cal, rms=0.029253Jy sigma=0.733210 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029253Jy sigma=0.733210 ! Fit after self-cal, rms=0.029133Jy sigma=0.727647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.915 mas, bmaj=2.139 mas, bpa=-0.4083 degrees ! Estimated noise=0.452218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000874849 Jy ! Component: 100 - total flux cleaned = 0.00115445 Jy ! Component: 150 - total flux cleaned = 0.00146022 Jy ! Component: 200 - total flux cleaned = 0.00175084 Jy ! Total flux subtracted in 200 components = 0.00175084 Jy ! Clean residual min=-0.002180 max=0.002163 Jy/beam ! Clean residual mean=-0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 1.33057 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 173 components and 1.33057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028985Jy sigma=0.723144 ! Fit after self-cal, rms=0.028984Jy sigma=0.723101 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363852 Jy ! Component: 100 - total flux cleaned = 0.000629541 Jy ! Component: 150 - total flux cleaned = 0.000882617 Jy ! Component: 200 - total flux cleaned = 0.00109177 Jy ! Total flux subtracted in 200 components = 0.00109177 Jy ! Clean residual min=-0.002125 max=0.002106 Jy/beam ! Clean residual mean=-0.000000 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 1.33166 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 183 components and 1.33166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028893Jy sigma=0.720330 ! Fit after self-cal, rms=0.028893Jy sigma=0.720308 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028893Jy sigma=0.720308 ! Fit after self-cal, rms=0.028895Jy sigma=0.720063 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.047 mas, bmaj=3.312 mas, bpa=-6.835 degrees ! Estimated noise=0.581441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293611 Jy ! Component: 100 - total flux cleaned = -0.000226689 Jy ! Component: 150 - total flux cleaned = -0.000308042 Jy ! Component: 200 - total flux cleaned = -0.000309119 Jy ! Total flux subtracted in 200 components = -0.000309119 Jy ! Clean residual min=-0.001736 max=0.002440 Jy/beam ! Clean residual mean=0.000000 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 1.33135 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 209 components and 1.33135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028872Jy sigma=0.718970 ! Fit after self-cal, rms=0.028870Jy sigma=0.718895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-46.8, 31.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191003 Jy ! Component: 100 - total flux cleaned = 0.00167723 Jy ! Component: 150 - total flux cleaned = 0.0013845 Jy ! Component: 200 - total flux cleaned = 0.001291 Jy ! Total flux subtracted in 200 components = 0.001291 Jy ! Clean residual min=-0.001930 max=0.001722 Jy/beam ! Clean residual mean=-0.000000 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 1.33264 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 247 components and 1.33264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028753Jy sigma=0.715333 ! Fit after self-cal, rms=0.028743Jy sigma=0.714990 ! Inverting map ! Added new window around map position (36.8, 38.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896598 Jy ! Component: 100 - total flux cleaned = 0.000818139 Jy ! Component: 150 - total flux cleaned = 0.000722642 Jy ! Component: 200 - total flux cleaned = 0.000721562 Jy ! Total flux subtracted in 200 components = 0.000721562 Jy ! Clean residual min=-0.001595 max=0.001559 Jy/beam ! Clean residual mean=-0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 1.33336 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 276 components and 1.33336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028645Jy sigma=0.711885 ! Fit after self-cal, rms=0.028638Jy sigma=0.711615 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.915 mas, bmaj=2.139 mas, bpa=-0.4073 degrees ! Estimated noise=0.45227 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.915 x 2.139 at -0.4073 degrees (North through East) ! Clean map min=-0.0048751 max=0.87694 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028638Jy sigma=0.711615 ! Fit after self-cal, rms=0.026150Jy sigma=0.629451 ! Inverting map and beam ! Estimated beam: bmin=0.915 mas, bmaj=2.139 mas, bpa=-0.4135 degrees ! Estimated noise=0.452278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114038 Jy ! Component: 100 - total flux cleaned = -0.000114324 Jy ! Component: 150 - total flux cleaned = -0.000114378 Jy ! Component: 200 - total flux cleaned = -7.91935e-05 Jy ! Total flux subtracted in 200 components = -7.91935e-05 Jy ! Clean residual min=-0.001851 max=0.001377 Jy/beam ! Clean residual mean=-0.000001 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 1.33328 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 306 components and 1.33328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026025Jy sigma=0.625919 ! Fit after self-cal, rms=0.026024Jy sigma=0.625858 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.76766e-05 Jy ! Component: 100 - total flux cleaned = 6.37047e-05 Jy ! Component: 150 - total flux cleaned = 9.54141e-05 Jy ! Component: 200 - total flux cleaned = 0.000156343 Jy ! Total flux subtracted in 200 components = 0.000156343 Jy ! Clean residual min=-0.001798 max=0.001307 Jy/beam ! Clean residual mean=-0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 1.33344 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 316 components and 1.33344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025946Jy sigma=0.623567 ! Fit after self-cal, rms=0.025945Jy sigma=0.623541 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025945Jy sigma=0.623541 ! Fit after self-cal, rms=0.025941Jy sigma=0.623386 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.726 mas, bmaj=1.818 mas, bpa=-0.01721 degrees ! Estimated noise=0.648107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.648479 Jy ! Component: 100 - total flux cleaned = 0.905899 Jy ! Component: 150 - total flux cleaned = 1.04661 Jy ! Component: 200 - total flux cleaned = 1.13543 Jy ! Total flux subtracted in 200 components = 1.13543 Jy ! Clean residual min=-0.022544 max=0.046957 Jy/beam ! Clean residual mean=-0.000018 rms=0.006125 Jy/beam ! Combined flux in latest and established models = 1.13543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.13543 Jy ! Inverting map and beam ! Estimated beam: bmin=0.915 mas, bmaj=2.139 mas, bpa=-0.4137 degrees ! Estimated noise=0.452273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0784486 Jy ! Component: 100 - total flux cleaned = 0.119928 Jy ! Component: 150 - total flux cleaned = 0.142622 Jy ! Component: 200 - total flux cleaned = 0.15622 Jy ! Total flux subtracted in 200 components = 0.15622 Jy ! Clean residual min=-0.005475 max=0.009923 Jy/beam ! Clean residual mean=-0.000006 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 1.29165 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 1.29165 Jy ! Inverting map ! Added new window around map position (2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00994125 Jy ! Component: 100 - total flux cleaned = 0.0140482 Jy ! Component: 150 - total flux cleaned = 0.0174843 Jy ! Component: 200 - total flux cleaned = 0.0204601 Jy ! Total flux subtracted in 200 components = 0.0204601 Jy ! Clean residual min=-0.003984 max=0.004309 Jy/beam ! Clean residual mean=-0.000003 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 1.31211 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 53 components and 1.31211 Jy ! Inverting map ! Added new window around map position (-28.4, 50.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342971 Jy ! Component: 100 - total flux cleaned = 0.00483184 Jy ! Component: 150 - total flux cleaned = 0.00583091 Jy ! Component: 200 - total flux cleaned = 0.00700524 Jy ! Total flux subtracted in 200 components = 0.00700524 Jy ! Clean residual min=-0.003378 max=0.002922 Jy/beam ! Clean residual mean=-0.000002 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 1.31911 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 91 components and 1.31911 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.047 mas, bmaj=3.313 mas, bpa=-6.838 degrees ! Estimated noise=0.581484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306429 Jy ! Component: 100 - total flux cleaned = 0.00393837 Jy ! Component: 150 - total flux cleaned = 0.00496506 Jy ! Component: 200 - total flux cleaned = 0.00582814 Jy ! Total flux subtracted in 200 components = 0.00582814 Jy ! Clean residual min=-0.002629 max=0.002436 Jy/beam ! Clean residual mean=-0.000003 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 1.32494 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290986 Jy ! Component: 100 - total flux cleaned = 0.00077436 Jy ! Component: 150 - total flux cleaned = 0.00129323 Jy ! Component: 200 - total flux cleaned = 0.0017803 Jy ! Total flux subtracted in 200 components = 0.0017803 Jy ! Clean residual min=-0.002203 max=0.002063 Jy/beam ! Clean residual mean=-0.000003 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 1.32672 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 145 components and 1.32672 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.915 mas, bmaj=2.139 mas, bpa=-0.4137 degrees ! Estimated noise=0.452273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000782499 Jy ! Component: 100 - total flux cleaned = -0.000787138 Jy ! Component: 150 - total flux cleaned = -0.000283288 Jy ! Component: 200 - total flux cleaned = -0.000127918 Jy ! Total flux subtracted in 200 components = -0.000127918 Jy ! Clean residual min=-0.002608 max=0.002158 Jy/beam ! Clean residual mean=-0.000002 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 1.32659 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 165 components and 1.32659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027076Jy sigma=0.661369 ! Fit after self-cal, rms=0.026911Jy sigma=0.655193 wmodel J0442-0017_X_map.mod ! Writing 165 model components to file: J0442-0017_X_map.mod wobs J0442-0017_X_uvs.fits ! Writing UV FITS file: J0442-0017_X_uvs.fits wwins J0442-0017_X_map.win ! wwins: Wrote 13 windows to J0442-0017_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00052122 Jy ! Component: 100 - total flux cleaned = -0.000940217 Jy ! Component: 150 - total flux cleaned = -0.0013011 Jy ! Component: 200 - total flux cleaned = -0.00160923 Jy ! Component: 250 - total flux cleaned = -0.00180493 Jy ! Component: 300 - total flux cleaned = -0.00196112 Jy ! Component: 350 - total flux cleaned = -0.0020212 Jy ! Component: 400 - total flux cleaned = -0.00199158 Jy ! Component: 450 - total flux cleaned = -0.00213228 Jy ! Component: 500 - total flux cleaned = -0.00218791 Jy ! Component: 550 - total flux cleaned = -0.00229522 Jy ! Component: 600 - total flux cleaned = -0.00245089 Jy ! Component: 650 - total flux cleaned = -0.00260277 Jy ! Component: 700 - total flux cleaned = -0.00277493 Jy ! Component: 750 - total flux cleaned = -0.00284763 Jy ! Component: 800 - total flux cleaned = -0.00296624 Jy ! Component: 850 - total flux cleaned = -0.0031284 Jy ! Component: 900 - total flux cleaned = -0.0032647 Jy ! Component: 950 - total flux cleaned = -0.00333109 Jy ! Component: 1000 - total flux cleaned = -0.00344079 Jy ! Component: 1050 - total flux cleaned = -0.0035909 Jy ! Component: 1100 - total flux cleaned = -0.00367575 Jy ! Component: 1150 - total flux cleaned = -0.00377967 Jy ! Component: 1200 - total flux cleaned = -0.00390176 Jy ! Component: 1250 - total flux cleaned = -0.00396145 Jy ! Component: 1300 - total flux cleaned = -0.00411858 Jy ! Component: 1350 - total flux cleaned = -0.00421439 Jy ! Component: 1400 - total flux cleaned = -0.00427096 Jy ! Component: 1450 - total flux cleaned = -0.00428979 Jy ! Component: 1500 - total flux cleaned = -0.0043818 Jy ! Component: 1550 - total flux cleaned = -0.00443612 Jy ! Component: 1600 - total flux cleaned = -0.00443596 Jy ! Component: 1650 - total flux cleaned = -0.00445353 Jy ! Component: 1700 - total flux cleaned = -0.00452225 Jy ! Component: 1750 - total flux cleaned = -0.00450547 Jy ! Component: 1800 - total flux cleaned = -0.0045392 Jy ! Component: 1850 - total flux cleaned = -0.00457201 Jy ! Component: 1900 - total flux cleaned = -0.00457185 Jy ! Component: 1950 - total flux cleaned = -0.00458782 Jy ! Component: 2000 - total flux cleaned = -0.00455622 Jy ! Component: 2050 - total flux cleaned = -0.00458753 Jy ! Component: 2100 - total flux cleaned = -0.00457211 Jy ! Component: 2150 - total flux cleaned = -0.00460266 Jy ! Component: 2200 - total flux cleaned = -0.00463287 Jy ! Component: 2250 - total flux cleaned = -0.00466261 Jy ! Component: 2300 - total flux cleaned = -0.00466272 Jy ! Component: 2350 - total flux cleaned = -0.00469177 Jy ! Component: 2400 - total flux cleaned = -0.00477815 Jy ! Component: 2450 - total flux cleaned = -0.00482068 Jy ! Component: 2500 - total flux cleaned = -0.00479252 Jy ! Component: 2550 - total flux cleaned = -0.00482034 Jy ! Component: 2600 - total flux cleaned = -0.00483403 Jy ! Component: 2650 - total flux cleaned = -0.00483416 Jy ! Component: 2700 - total flux cleaned = -0.00484775 Jy ! Component: 2750 - total flux cleaned = -0.00484783 Jy ! Component: 2800 - total flux cleaned = -0.00483468 Jy ! Component: 2850 - total flux cleaned = -0.0048608 Jy ! Component: 2900 - total flux cleaned = -0.00491265 Jy ! Component: 2950 - total flux cleaned = -0.00487411 Jy ! Component: 3000 - total flux cleaned = -0.00492498 Jy ! Component: 3050 - total flux cleaned = -0.00496262 Jy ! Component: 3100 - total flux cleaned = -0.00499994 Jy ! Component: 3150 - total flux cleaned = -0.00497528 Jy ! Component: 3200 - total flux cleaned = -0.00503666 Jy ! Component: 3250 - total flux cleaned = -0.00507311 Jy ! Component: 3300 - total flux cleaned = -0.0051693 Jy ! Component: 3350 - total flux cleaned = -0.00513341 Jy ! Component: 3400 - total flux cleaned = -0.00515701 Jy ! Component: 3450 - total flux cleaned = -0.0052394 Jy ! Component: 3500 - total flux cleaned = -0.0052743 Jy ! Component: 3550 - total flux cleaned = -0.00529751 Jy ! Component: 3600 - total flux cleaned = -0.00535487 Jy ! Component: 3650 - total flux cleaned = -0.00538911 Jy ! Component: 3700 - total flux cleaned = -0.00550228 Jy ! Component: 3750 - total flux cleaned = -0.00550224 Jy ! Component: 3800 - total flux cleaned = -0.00551345 Jy ! Component: 3850 - total flux cleaned = -0.00552455 Jy ! Component: 3900 - total flux cleaned = -0.00554658 Jy ! Component: 3950 - total flux cleaned = -0.00556846 Jy ! Component: 4000 - total flux cleaned = -0.00559005 Jy ! Component: 4050 - total flux cleaned = -0.00558999 Jy ! Total flux subtracted in 4096 components = -0.00558986 Jy ! Clean residual min=-0.000740 max=0.000655 Jy/beam ! Clean residual mean=-0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 1.321 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 462 components and 1.321 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0442-0017_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.915 x 2.139 at -0.4137 degrees (North through East) ! Clean map min=-0.0025691 max=0.86823 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0442-0017_X_map.fits wmodel /vlbi/sb072/temp_maps//J0442-0017_X_map.mod ! Writing 462 model components to file: /vlbi/sb072/temp_maps//J0442-0017_X_map.mod wobs /vlbi/sb072/temp_maps//J0442-0017_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0442-0017_X_uvs.fits wwins /vlbi/sb072/temp_maps//J0442-0017_X_map.win ! wwins: Wrote 14 windows to /vlbi/sb072/temp_maps//J0442-0017_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.868226 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180418 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0623401 0.0623401 0.12468 0.24936 0.498721 0.997442 1.99488 3.98977 7.97953 15.9591 31.9181 63.8363 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.868 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4812.31 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0442-0017_X_dfm.log closed on Fri Jan 25 19:16:18 2019