! Started logfile: /vlbi/sb072/temp_maps//J0217+7349_X_dfm.log on Fri Jan 25 19:12:34 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J0217+7349_X_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0217+7349_X_uvm.fits ! AN table 1: 4 integrations on 28 of 28 possible baselines. ! AN table 2: 4 integrations on 21 of 21 possible baselines. ! AN table 3: 5 integrations on 15 of 15 possible baselines. ! AN table 4: 4 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.954217 visibilities/baseline/integration-bin. ! Found source: J0217+7349 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 3168 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0217+7349_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=2.417111Jy sigma=78.372620 ! Fit after self-cal, rms=1.340111Jy sigma=43.844177 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.032 mas, bmaj=1.18 mas, bpa=-75.51 degrees ! Estimated noise=0.657754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51815 Jy ! Component: 100 - total flux cleaned = 2.08121 Jy ! Total flux subtracted in 100 components = 2.08121 Jy ! Clean residual min=-0.097914 max=0.250710 Jy/beam ! Clean residual mean=0.000152 rms=0.024918 Jy/beam ! Combined flux in latest and established models = 2.08121 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.08121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.540404Jy sigma=16.960471 ! Fit after self-cal, rms=0.530905Jy sigma=16.646021 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.287927 Jy ! Component: 100 - total flux cleaned = 0.423011 Jy ! Total flux subtracted in 100 components = 0.423011 Jy ! Clean residual min=-0.067985 max=0.089725 Jy/beam ! Clean residual mean=0.000151 rms=0.013698 Jy/beam ! Combined flux in latest and established models = 2.50422 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 2.50422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.299477Jy sigma=8.903058 ! Fit after self-cal, rms=0.294331Jy sigma=8.731950 ! Inverting map ! Added new window around map position (1.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0980921 Jy ! Component: 100 - total flux cleaned = 0.147134 Jy ! Total flux subtracted in 100 components = 0.147134 Jy ! Clean residual min=-0.061067 max=0.060053 Jy/beam ! Clean residual mean=0.000146 rms=0.011470 Jy/beam ! Combined flux in latest and established models = 2.65135 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 2.65135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.253434Jy sigma=7.577629 ! Fit after self-cal, rms=0.250291Jy sigma=7.461947 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.329 mas, bmaj=1.556 mas, bpa=-75.42 degrees ! Estimated noise=0.406105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409949 Jy ! Component: 100 - total flux cleaned = 0.0480556 Jy ! Component: 150 - total flux cleaned = 0.049302 Jy ! Component: 200 - total flux cleaned = 0.0498563 Jy ! Total flux subtracted in 200 components = 0.0498563 Jy ! Clean residual min=-0.053036 max=0.060242 Jy/beam ! Clean residual mean=0.000382 rms=0.013302 Jy/beam ! Combined flux in latest and established models = 2.70121 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 2.70121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.241184Jy sigma=7.300299 ! Fit after self-cal, rms=0.240290Jy sigma=7.268344 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.329 x 1.556 at -75.42 degrees (North through East) ! Clean map min=-0.048334 max=1.9727 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 KP 1.01 LA 1.07 ! NL 1.03 OV 1.01 PT 1.00 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 HN 0.99 KP 1.00 LA 1.06 ! NL 1.08 OV 0.98 PT 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 0.85 LA 1.09 MK 1.06 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.94 HN 0.91 KP 0.96 ! LA 0.97 MK 1.08 NL 1.02 OV 1.07 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 KP 1.00 LA 1.07 ! NL 1.05 OV 1.00 PT 1.01 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.09 HN 0.98 KP 1.00 LA 1.05 ! NL 1.08 OV 0.98 PT 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 0.81 LA 1.09 MK 1.04 ! PT 0.90 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.95 HN 0.91 KP 0.97 ! LA 0.98 MK 1.07 NL 1.01 OV 1.08 ! PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 KP 1.01 LA 1.06 ! NL 1.04 OV 1.02 PT 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 HN 0.98 KP 1.00 LA 1.06 ! NL 1.06 OV 0.99 PT 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 0.80 LA 1.07 MK 1.01 ! PT 0.90 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.95 HN 0.93 KP 0.96 ! LA 0.97 MK 1.06 NL 1.01 OV 1.08 ! PT 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 KP 1.01 LA 1.06 ! NL 1.02 OV 1.00 PT 1.01 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.08 HN 0.97 KP 0.99 LA 1.06 ! NL 1.05 OV 0.98 PT 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 0.84 LA 1.08 MK 1.06 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.96 HN 0.93 KP 0.97 ! LA 0.99 MK 1.05 NL 1.01 OV 1.09 ! PT 0.90 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 KP 1.02 LA 1.06 ! NL 1.04 OV 1.02 PT 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.09 HN 0.99 KP 0.98 LA 1.06 ! NL 1.08 OV 0.98 PT 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.05 HN 0.87 LA 1.10 MK 0.98 ! PT 0.91 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.97 HN 0.91 KP 0.98 ! LA 0.99 MK 1.03 NL 1.02 OV 1.09 ! PT 0.90 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 KP 1.03 LA 1.06 ! NL 1.04 OV 1.03 PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.09 HN 1.00 KP 0.98 LA 1.05 ! NL 1.05 OV 0.98 PT 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.06 HN 0.88 LA 1.09 MK 1.07 ! PT 0.96 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.96 HN 0.93 KP 0.97 ! LA 0.98 MK 1.04 NL 1.02 OV 1.10 ! PT 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 KP 1.01 LA 1.06 ! NL 1.04 OV 1.02 PT 1.02 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 HN 1.00 KP 1.00 LA 1.06 ! NL 1.02 OV 0.97 PT 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 HN 0.87 LA 1.09 MK 1.08 ! PT 0.95 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.90 FD 0.96 HN 0.91 KP 0.98 ! LA 1.00 MK 1.05 NL 1.02 OV 1.09 ! PT 0.89 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 KP 1.02 LA 1.06 ! NL 1.05 OV 1.01 PT 1.00 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.09 HN 1.01 KP 1.00 LA 1.05 ! NL 1.04 OV 0.97 PT 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.05 HN 0.85 LA 1.11 MK 1.03 ! PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.96 HN 0.91 KP 0.98 ! LA 0.99 MK 1.03 NL 1.02 OV 1.09 ! PT 0.90 ! ! ! Fit before self-cal, rms=0.240290Jy sigma=7.268344 ! Fit after self-cal, rms=0.115959Jy sigma=3.142886 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.337 mas, bmaj=1.552 mas, bpa=-76.66 degrees ! Estimated noise=0.403295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369086 Jy ! Component: 100 - total flux cleaned = 0.0603404 Jy ! Component: 150 - total flux cleaned = 0.0694782 Jy ! Component: 200 - total flux cleaned = 0.0762582 Jy ! Total flux subtracted in 200 components = 0.0762582 Jy ! Clean residual min=-0.015503 max=0.020402 Jy/beam ! Clean residual mean=0.000008 rms=0.003700 Jy/beam ! Combined flux in latest and established models = 2.77747 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 2.77747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.101196Jy sigma=2.540154 ! Fit after self-cal, rms=0.099811Jy sigma=2.490255 ! Inverting map ! Added new window around map position (6.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134694 Jy ! Component: 100 - total flux cleaned = 0.0226676 Jy ! Component: 150 - total flux cleaned = 0.0288952 Jy ! Component: 200 - total flux cleaned = 0.0330314 Jy ! Total flux subtracted in 200 components = 0.0330314 Jy ! Clean residual min=-0.014273 max=0.013228 Jy/beam ! Clean residual mean=-0.000001 rms=0.003034 Jy/beam ! Combined flux in latest and established models = 2.8105 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 74 components and 2.8105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093616Jy sigma=2.258853 ! Fit after self-cal, rms=0.092517Jy sigma=2.224206 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092517Jy sigma=2.224206 ! Fit after self-cal, rms=0.090901Jy sigma=2.176120 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.335 mas, bmaj=1.547 mas, bpa=-77.08 degrees ! Estimated noise=0.402692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104121 Jy ! Component: 100 - total flux cleaned = 0.0143588 Jy ! Component: 150 - total flux cleaned = 0.0182062 Jy ! Component: 200 - total flux cleaned = 0.0212795 Jy ! Total flux subtracted in 200 components = 0.0212795 Jy ! Clean residual min=-0.012251 max=0.010832 Jy/beam ! Clean residual mean=0.000012 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 2.83178 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 2.83178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.086627Jy sigma=2.032049 ! Fit after self-cal, rms=0.086075Jy sigma=2.005753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114516 Jy ! Component: 100 - total flux cleaned = 0.00353382 Jy ! Component: 150 - total flux cleaned = 0.00622125 Jy ! Component: 200 - total flux cleaned = 0.00783633 Jy ! Total flux subtracted in 200 components = 0.00783633 Jy ! Clean residual min=-0.011890 max=0.010367 Jy/beam ! Clean residual mean=0.000009 rms=0.002381 Jy/beam ! Combined flux in latest and established models = 2.83962 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 2.83962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.083216Jy sigma=1.915592 ! Fit after self-cal, rms=0.082865Jy sigma=1.894210 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082865Jy sigma=1.894210 ! Fit after self-cal, rms=0.081983Jy sigma=1.878765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.334 mas, bmaj=1.544 mas, bpa=-77.33 degrees ! Estimated noise=0.402419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557801 Jy ! Component: 100 - total flux cleaned = 0.0074255 Jy ! Component: 150 - total flux cleaned = 0.00956962 Jy ! Component: 200 - total flux cleaned = 0.0114849 Jy ! Total flux subtracted in 200 components = 0.0114849 Jy ! Clean residual min=-0.011215 max=0.009175 Jy/beam ! Clean residual mean=0.000009 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 2.8511 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 2.8511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.079442Jy sigma=1.798534 ! Fit after self-cal, rms=0.079151Jy sigma=1.779027 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228983 Jy ! Component: 100 - total flux cleaned = 0.0015141 Jy ! Component: 150 - total flux cleaned = 0.00327931 Jy ! Component: 200 - total flux cleaned = 0.00447132 Jy ! Total flux subtracted in 200 components = 0.00447132 Jy ! Clean residual min=-0.010684 max=0.008683 Jy/beam ! Clean residual mean=0.000008 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 2.85557 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 2.85557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.077336Jy sigma=1.722660 ! Fit after self-cal, rms=0.077131Jy sigma=1.706975 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.077131Jy sigma=1.706975 ! Fit after self-cal, rms=0.076506Jy sigma=1.698450 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=3.202 mas, bpa=50.28 degrees ! Estimated noise=0.466078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720688 Jy ! Component: 100 - total flux cleaned = 0.00918954 Jy ! Component: 150 - total flux cleaned = 0.0108613 Jy ! Component: 200 - total flux cleaned = 0.0122829 Jy ! Total flux subtracted in 200 components = 0.0122829 Jy ! Clean residual min=-0.006370 max=0.006698 Jy/beam ! Clean residual mean=0.000014 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 2.86785 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 2.86785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.075526Jy sigma=1.668199 ! Fit after self-cal, rms=0.075398Jy sigma=1.654921 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.97385e-05 Jy ! Component: 100 - total flux cleaned = 0.000508969 Jy ! Component: 150 - total flux cleaned = 0.00160229 Jy ! Component: 200 - total flux cleaned = 0.00249509 Jy ! Total flux subtracted in 200 components = 0.00249509 Jy ! Clean residual min=-0.006026 max=0.006335 Jy/beam ! Clean residual mean=0.000012 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 2.87035 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 127 components and 2.87035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.074828Jy sigma=1.639615 ! Fit after self-cal, rms=0.074714Jy sigma=1.627936 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.332 mas, bmaj=1.542 mas, bpa=-77.52 degrees ! Estimated noise=0.402238 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.332 x 1.542 at -77.52 degrees (North through East) ! Clean map min=-0.0080138 max=1.9336 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.074714Jy sigma=1.627936 ! Fit after self-cal, rms=0.063567Jy sigma=1.427040 ! Inverting map and beam ! Estimated beam: bmin=1.333 mas, bmaj=1.544 mas, bpa=-77.25 degrees ! Estimated noise=0.402699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312086 Jy ! Component: 100 - total flux cleaned = 0.00402157 Jy ! Component: 150 - total flux cleaned = 0.00494409 Jy ! Component: 200 - total flux cleaned = 0.00526457 Jy ! Total flux subtracted in 200 components = 0.00526457 Jy ! Clean residual min=-0.008789 max=0.007628 Jy/beam ! Clean residual mean=0.000007 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 2.87562 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 134 components and 2.87561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.061867Jy sigma=1.373569 ! Fit after self-cal, rms=0.061728Jy sigma=1.361279 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177388 Jy ! Component: 100 - total flux cleaned = 0.000709378 Jy ! Component: 150 - total flux cleaned = 0.00131497 Jy ! Component: 200 - total flux cleaned = 0.00172813 Jy ! Total flux subtracted in 200 components = 0.00172813 Jy ! Clean residual min=-0.008325 max=0.007263 Jy/beam ! Clean residual mean=0.000006 rms=0.001621 Jy/beam ! Combined flux in latest and established models = 2.87734 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 2.87734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060557Jy sigma=1.327540 ! Fit after self-cal, rms=0.060471Jy sigma=1.317438 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060471Jy sigma=1.317438 ! Fit after self-cal, rms=0.059920Jy sigma=1.310399 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=1.168 mas, bpa=-72.99 degrees ! Estimated noise=0.650826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5053 Jy ! Component: 100 - total flux cleaned = 2.09606 Jy ! Component: 150 - total flux cleaned = 2.37845 Jy ! Component: 200 - total flux cleaned = 2.52214 Jy ! Total flux subtracted in 200 components = 2.52214 Jy ! Clean residual min=-0.027407 max=0.070490 Jy/beam ! Clean residual mean=0.000014 rms=0.007449 Jy/beam ! Combined flux in latest and established models = 2.52214 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 2.52214 Jy ! Inverting map and beam ! Estimated beam: bmin=1.331 mas, bmaj=1.542 mas, bpa=-77.41 degrees ! Estimated noise=0.402436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11257 Jy ! Component: 100 - total flux cleaned = 0.170697 Jy ! Component: 150 - total flux cleaned = 0.210033 Jy ! Component: 200 - total flux cleaned = 0.239353 Jy ! Total flux subtracted in 200 components = 0.239353 Jy ! Clean residual min=-0.012493 max=0.018131 Jy/beam ! Clean residual mean=0.000031 rms=0.003435 Jy/beam ! Combined flux in latest and established models = 2.76149 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 57 components and 2.76149 Jy ! Inverting map ! Added new window around map position (3.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231675 Jy ! Component: 100 - total flux cleaned = 0.0417592 Jy ! Component: 150 - total flux cleaned = 0.0569368 Jy ! Component: 200 - total flux cleaned = 0.0694098 Jy ! Total flux subtracted in 200 components = 0.0694098 Jy ! Clean residual min=-0.008494 max=0.008602 Jy/beam ! Clean residual mean=0.000015 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 2.8309 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 90 components and 2.8309 Jy ! Inverting map ! Added new window around map position (13, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105369 Jy ! Component: 100 - total flux cleaned = 0.0191869 Jy ! Component: 150 - total flux cleaned = 0.0264162 Jy ! Component: 200 - total flux cleaned = 0.0324739 Jy ! Total flux subtracted in 200 components = 0.0324739 Jy ! Clean residual min=-0.007022 max=0.006880 Jy/beam ! Clean residual mean=0.000008 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 2.86337 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 106 components and 2.86337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=3.199 mas, bpa=50.34 degrees ! Estimated noise=0.466727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648146 Jy ! Component: 100 - total flux cleaned = 0.0109219 Jy ! Component: 150 - total flux cleaned = 0.0142881 Jy ! Component: 200 - total flux cleaned = 0.01689 Jy ! Total flux subtracted in 200 components = 0.01689 Jy ! Clean residual min=-0.005373 max=0.005416 Jy/beam ! Clean residual mean=0.000010 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 2.88026 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160007 Jy ! Component: 100 - total flux cleaned = 0.00239487 Jy ! Component: 150 - total flux cleaned = 0.00285334 Jy ! Component: 200 - total flux cleaned = 0.00315629 Jy ! Total flux subtracted in 200 components = 0.00315629 Jy ! Clean residual min=-0.005336 max=0.005320 Jy/beam ! Clean residual mean=0.000008 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 2.88342 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 153 components and 2.88342 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.331 mas, bmaj=1.542 mas, bpa=-77.41 degrees ! Estimated noise=0.402436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000884097 Jy ! Component: 100 - total flux cleaned = -0.00116354 Jy ! Component: 150 - total flux cleaned = -0.00103202 Jy ! Component: 200 - total flux cleaned = -0.000910444 Jy ! Total flux subtracted in 200 components = -0.000910444 Jy ! Clean residual min=-0.006508 max=0.006312 Jy/beam ! Clean residual mean=0.000004 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 2.88251 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 161 components and 2.88251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055814Jy sigma=1.182014 ! Fit after self-cal, rms=0.055472Jy sigma=1.157169 wmodel J0217+7349_X_map.mod ! Writing 161 model components to file: J0217+7349_X_map.mod wobs J0217+7349_X_uvs.fits ! Writing UV FITS file: J0217+7349_X_uvs.fits wwins J0217+7349_X_map.win ! wwins: Wrote 6 windows to J0217+7349_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140264 Jy ! Component: 100 - total flux cleaned = -0.00130132 Jy ! Component: 150 - total flux cleaned = -0.00119906 Jy ! Component: 200 - total flux cleaned = -0.00109992 Jy ! Component: 250 - total flux cleaned = -0.00138026 Jy ! Component: 300 - total flux cleaned = -0.00156 Jy ! Component: 350 - total flux cleaned = -0.00173677 Jy ! Component: 400 - total flux cleaned = -0.00225081 Jy ! Component: 450 - total flux cleaned = -0.00250076 Jy ! Component: 500 - total flux cleaned = -0.00274665 Jy ! Component: 550 - total flux cleaned = -0.00306597 Jy ! Component: 600 - total flux cleaned = -0.00322156 Jy ! Component: 650 - total flux cleaned = -0.00360357 Jy ! Component: 700 - total flux cleaned = -0.00390257 Jy ! Component: 750 - total flux cleaned = -0.00412275 Jy ! Component: 800 - total flux cleaned = -0.00434115 Jy ! Component: 850 - total flux cleaned = -0.00469874 Jy ! Component: 900 - total flux cleaned = -0.00483869 Jy ! Component: 950 - total flux cleaned = -0.00490723 Jy ! Component: 1000 - total flux cleaned = -0.00497466 Jy ! Component: 1050 - total flux cleaned = -0.00490903 Jy ! Component: 1100 - total flux cleaned = -0.00504183 Jy ! Component: 1150 - total flux cleaned = -0.00510739 Jy ! Component: 1200 - total flux cleaned = -0.00523513 Jy ! Component: 1250 - total flux cleaned = -0.00510823 Jy ! Component: 1300 - total flux cleaned = -0.00523377 Jy ! Component: 1350 - total flux cleaned = -0.00523347 Jy ! Component: 1400 - total flux cleaned = -0.00517266 Jy ! Component: 1450 - total flux cleaned = -0.00517326 Jy ! Component: 1500 - total flux cleaned = -0.00529085 Jy ! Component: 1550 - total flux cleaned = -0.00529054 Jy ! Component: 1600 - total flux cleaned = -0.00534764 Jy ! Component: 1650 - total flux cleaned = -0.0054031 Jy ! Component: 1700 - total flux cleaned = -0.00534664 Jy ! Component: 1750 - total flux cleaned = -0.00540105 Jy ! Component: 1800 - total flux cleaned = -0.00523757 Jy ! Component: 1850 - total flux cleaned = -0.0053994 Jy ! Component: 1900 - total flux cleaned = -0.00534547 Jy ! Component: 1950 - total flux cleaned = -0.00534516 Jy ! Component: 2000 - total flux cleaned = -0.0051379 Jy ! Component: 2050 - total flux cleaned = -0.00508745 Jy ! Component: 2100 - total flux cleaned = -0.00503698 Jy ! Component: 2150 - total flux cleaned = -0.00513752 Jy ! Component: 2200 - total flux cleaned = -0.00518673 Jy ! Component: 2250 - total flux cleaned = -0.00528366 Jy ! Component: 2300 - total flux cleaned = -0.00513863 Jy ! Component: 2350 - total flux cleaned = -0.00509053 Jy ! Component: 2400 - total flux cleaned = -0.00499658 Jy ! Component: 2450 - total flux cleaned = -0.00518212 Jy ! Component: 2500 - total flux cleaned = -0.00508991 Jy ! Component: 2550 - total flux cleaned = -0.00513499 Jy ! Component: 2600 - total flux cleaned = -0.00513443 Jy ! Component: 2650 - total flux cleaned = -0.00513349 Jy ! Component: 2700 - total flux cleaned = -0.00513333 Jy ! Component: 2750 - total flux cleaned = -0.0052212 Jy ! Component: 2800 - total flux cleaned = -0.00526395 Jy ! Component: 2850 - total flux cleaned = -0.00539234 Jy ! Component: 2900 - total flux cleaned = -0.00543397 Jy ! Component: 2950 - total flux cleaned = -0.00539316 Jy ! Component: 3000 - total flux cleaned = -0.00543506 Jy ! Component: 3050 - total flux cleaned = -0.0055993 Jy ! Component: 3100 - total flux cleaned = -0.00559943 Jy ! Component: 3150 - total flux cleaned = -0.0056397 Jy ! Component: 3200 - total flux cleaned = -0.00571994 Jy ! Component: 3250 - total flux cleaned = -0.00568043 Jy ! Component: 3300 - total flux cleaned = -0.00575832 Jy ! Component: 3350 - total flux cleaned = -0.00595229 Jy ! Component: 3400 - total flux cleaned = -0.00599089 Jy ! Component: 3450 - total flux cleaned = -0.006218 Jy ! Component: 3500 - total flux cleaned = -0.00625556 Jy ! Component: 3550 - total flux cleaned = -0.00629254 Jy ! Component: 3600 - total flux cleaned = -0.00625579 Jy ! Component: 3650 - total flux cleaned = -0.00629235 Jy ! Component: 3700 - total flux cleaned = -0.00632854 Jy ! Component: 3750 - total flux cleaned = -0.00625706 Jy ! Component: 3800 - total flux cleaned = -0.00636342 Jy ! Component: 3850 - total flux cleaned = -0.00657482 Jy ! Component: 3900 - total flux cleaned = -0.00647029 Jy ! Component: 3950 - total flux cleaned = -0.00633202 Jy ! Component: 4000 - total flux cleaned = -0.00643546 Jy ! Component: 4050 - total flux cleaned = -0.00643518 Jy ! Total flux subtracted in 4096 components = -0.00656958 Jy ! Clean residual min=-0.001676 max=0.001919 Jy/beam ! Clean residual mean=0.000005 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 2.87594 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 443 components and 2.87594 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0217+7349_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.331 x 1.542 at -77.41 degrees (North through East) ! Clean map min=-0.0040953 max=1.9283 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0217+7349_X_map.fits wmodel /vlbi/sb072/temp_maps//J0217+7349_X_map.mod ! Writing 443 model components to file: /vlbi/sb072/temp_maps//J0217+7349_X_map.mod wobs /vlbi/sb072/temp_maps//J0217+7349_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0217+7349_X_uvs.fits wwins /vlbi/sb072/temp_maps//J0217+7349_X_map.win ! wwins: Wrote 7 windows to /vlbi/sb072/temp_maps//J0217+7349_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.92826 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000592555 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0921899 0.0921899 0.18438 0.368759 0.737519 1.47504 2.95008 5.90015 11.8003 23.6006 47.2012 94.4024 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.928 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3254.15 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0217+7349_X_dfm.log closed on Fri Jan 25 19:12:38 2019