! Started logfile: /vlbi/sb072/temp_maps//J0117+8928_C_dfm.log on Mon Nov 12 22:47:32 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/sb072/temp_maps//J0117+8928_C_uva.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J0117+8928_C_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! AN table 2: 23 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.83871 visibilities/baseline/integration-bin.
! Found source: J0117+8928
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 4784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0117+8928_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 46 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003822Jy  sigma=25.547845
! Fit after  self-cal, rms=0.973022Jy  sigma=25.368449
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.791 mas, bmaj=6.348 mas, bpa=19.78 degrees
! Estimated noise=0.966134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094493 Jy
! Component: 100  -  total flux cleaned = 0.0150009 Jy
! Total flux subtracted in 100 components = 0.0150009 Jy
! Clean residual min=-0.004242 max=0.004283 Jy/beam
! Clean residual mean=0.000001 rms=0.001803 Jy/beam
! Combined flux in latest and established models = 0.0150009 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 0.0150009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076598Jy  sigma=0.966403
! Fit after  self-cal, rms=0.075787Jy  sigma=0.946814
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.276 mas, bmaj=6.846 mas, bpa=23.33 degrees
! Estimated noise=0.452007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015626 Jy
! Component: 100  -  total flux cleaned = 0.0263486 Jy
! Component: 150  -  total flux cleaned = 0.0339092 Jy
! Component: 200  -  total flux cleaned = 0.0387128 Jy
! Total flux subtracted in 200 components = 0.0387128 Jy
! Clean residual min=-0.005781 max=0.005796 Jy/beam
! Clean residual mean=0.000019 rms=0.002873 Jy/beam
! Combined flux in latest and established models = 0.0537137 Jy
! Performing phase self-cal
! Adding 166 model components to the UV plane model.
! The established model now contains 212 components and 0.0537137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065109Jy  sigma=0.774840
! Fit after  self-cal, rms=0.064580Jy  sigma=0.768828
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.276 x 6.846 at 23.33 degrees (North through East)
! Clean map  min=-0.0075385  max=0.023318 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.64     FD        0.95     LA        0.54     NL        1.54     
!   OV        1.46     PT        1.61     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.36     FD        0.91     LA        0.55     NL        1.59     
!   OV        1.31     PT        1.51     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.43     FD        0.87     LA        0.61     NL        1.50     
!   OV        1.38     PT        1.60     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.44     FD        0.87     LA        0.59     NL        1.03     
!   OV        1.42     PT        1.15     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.06     LA        0.65     NL        1.30     
!   OV        1.55     PT        0.59     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.66     FD        0.92     LA        0.78     NL        1.58     
!   OV        1.37     PT        0.58     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.85     FD        0.96     LA        0.77     NL        1.22     
!   OV        1.54     PT        0.58     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.77     FD        1.05     LA        0.76     NL        1.46     
!   OV        1.72     PT        0.54     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.064580Jy  sigma=0.768828
! Fit after  self-cal, rms=0.058802Jy  sigma=0.681669
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.819 mas, bmaj=7.512 mas, bpa=26.57 degrees
! Estimated noise=0.465519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180452 Jy
! Component: 100  -  total flux cleaned = -0.00220131 Jy
! Component: 150  -  total flux cleaned = -0.0014863 Jy
! Component: 200  -  total flux cleaned = -0.000986615 Jy
! Total flux subtracted in 200 components = -0.000986615 Jy
! Clean residual min=-0.002688 max=0.002685 Jy/beam
! Clean residual mean=-0.000005 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.0527271 Jy
! Performing phase self-cal
! Adding 115 model components to the UV plane model.
! The established model now contains 327 components and 0.0527271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056457Jy  sigma=0.641638
! Fit after  self-cal, rms=0.056468Jy  sigma=0.636254
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056468Jy  sigma=0.636254
! Fit after  self-cal, rms=0.053292Jy  sigma=0.635079
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.8 mas, bmaj=7.373 mas, bpa=25.07 degrees
! Estimated noise=0.446315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000927533 Jy
! Component: 100  -  total flux cleaned = -0.00119834 Jy
! Component: 150  -  total flux cleaned = -0.00183427 Jy
! Component: 200  -  total flux cleaned = -0.00269199 Jy
! Total flux subtracted in 200 components = -0.00269199 Jy
! Clean residual min=-0.001997 max=0.001983 Jy/beam
! Clean residual mean=-0.000007 rms=0.001054 Jy/beam
! Combined flux in latest and established models = 0.0500351 Jy
selfcal
! Performing phase self-cal
! Adding 135 model components to the UV plane model.
! The established model now contains 456 components and 0.0500351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052010Jy  sigma=0.618767
! Fit after  self-cal, rms=0.051846Jy  sigma=0.617394
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000263559 Jy
! Component: 100  -  total flux cleaned = -4.09974e-05 Jy
! Component: 150  -  total flux cleaned = -0.000786454 Jy
! Component: 200  -  total flux cleaned = -0.00159836 Jy
! Total flux subtracted in 200 components = -0.00159836 Jy
! Clean residual min=-0.001662 max=0.001653 Jy/beam
! Clean residual mean=-0.000005 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.0484368 Jy
! Performing phase self-cal
! Adding 140 model components to the UV plane model.
! The established model now contains 567 components and 0.0484368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050900Jy  sigma=0.606823
! Fit after  self-cal, rms=0.050817Jy  sigma=0.605984
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050817Jy  sigma=0.605984
! Fit after  self-cal, rms=0.049387Jy  sigma=0.552712
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.788 mas, bmaj=7.275 mas, bpa=26.36 degrees
! Estimated noise=0.448557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000971276 Jy
! Component: 100  -  total flux cleaned = 0.00153205 Jy
! Component: 150  -  total flux cleaned = 0.0018062 Jy
! Component: 200  -  total flux cleaned = 0.00215265 Jy
! Total flux subtracted in 200 components = 0.00215265 Jy
! Clean residual min=-0.000793 max=0.000796 Jy/beam
! Clean residual mean=-0.000006 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0505894 Jy
selfcal
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 648 components and 0.0505894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049011Jy  sigma=0.550978
! Fit after  self-cal, rms=0.049021Jy  sigma=0.550023
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000250263 Jy
! Component: 100  -  total flux cleaned = 0.000385795 Jy
! Component: 150  -  total flux cleaned = 0.000671022 Jy
! Component: 200  -  total flux cleaned = 0.000937049 Jy
! Total flux subtracted in 200 components = 0.000937049 Jy
! Clean residual min=-0.000620 max=0.000620 Jy/beam
! Clean residual mean=-0.000007 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.0515265 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 719 components and 0.0515265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048793Jy  sigma=0.549720
! Fit after  self-cal, rms=0.048772Jy  sigma=0.549551
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048772Jy  sigma=0.549551
! Fit after  self-cal, rms=0.052079Jy  sigma=0.547104
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.113 mas, bmaj=7.764 mas, bpa=28.21 degrees
! Estimated noise=0.453593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120519 Jy
! Component: 100  -  total flux cleaned = 0.00190147 Jy
! Component: 150  -  total flux cleaned = 0.0024238 Jy
! Component: 200  -  total flux cleaned = 0.00285434 Jy
! Total flux subtracted in 200 components = 0.00285434 Jy
! Clean residual min=-0.000873 max=0.000872 Jy/beam
! Clean residual mean=-0.000007 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.0543808 Jy
selfcal
! Performing phase self-cal
! Adding 104 model components to the UV plane model.
! The established model now contains 810 components and 0.0543808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051694Jy  sigma=0.545967
! Fit after  self-cal, rms=0.051619Jy  sigma=0.545631
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279915 Jy
! Component: 100  -  total flux cleaned = 0.000573659 Jy
! Component: 150  -  total flux cleaned = 0.000758128 Jy
! Component: 200  -  total flux cleaned = 0.000934622 Jy
! Total flux subtracted in 200 components = 0.000934622 Jy
! Clean residual min=-0.000711 max=0.000718 Jy/beam
! Clean residual mean=-0.000009 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.0553155 Jy
! Performing phase self-cal
! Adding 103 model components to the UV plane model.
! The established model now contains 893 components and 0.0553155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051361Jy  sigma=0.545278
! Fit after  self-cal, rms=0.051335Jy  sigma=0.545096
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.726 mas, bmaj=7.185 mas, bpa=26.19 degrees
! Estimated noise=0.445629 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.726 x 7.185 at 26.19 degrees (North through East)
! Clean map  min=-0.0036577  max=0.018682 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.173 mas, bmaj=6.446 mas, bpa=24.72 degrees
! Estimated noise=0.983594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00885637 Jy
! Component: 100  -  total flux cleaned = 0.0140766 Jy
! Component: 150  -  total flux cleaned = 0.0180045 Jy
! Component: 200  -  total flux cleaned = 0.0217596 Jy
! Total flux subtracted in 200 components = 0.0217596 Jy
! Clean residual min=-0.003207 max=0.003231 Jy/beam
! Clean residual mean=0.000001 rms=0.001326 Jy/beam
! Combined flux in latest and established models = 0.0217596 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 88 model components to the UV plane model.
! The established model now contains 88 components and 0.0217596 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.726 mas, bmaj=7.185 mas, bpa=26.19 degrees
! Estimated noise=0.445629 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00732811 Jy
! Component: 100  -  total flux cleaned = 0.00984442 Jy
! Component: 150  -  total flux cleaned = 0.0107295 Jy
! Component: 200  -  total flux cleaned = 0.0114798 Jy
! Total flux subtracted in 200 components = 0.0114798 Jy
! Clean residual min=-0.003689 max=0.003692 Jy/beam
! Clean residual mean=0.000008 rms=0.001804 Jy/beam
! Combined flux in latest and established models = 0.0332393 Jy
! Adding 132 model components to the UV plane model.
! The established model now contains 218 components and 0.0332394 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.113 mas, bmaj=7.764 mas, bpa=28.21 degrees
! Estimated noise=0.453593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109333 Jy
! Component: 100  -  total flux cleaned = 0.00193268 Jy
! Component: 150  -  total flux cleaned = 0.00264337 Jy
! Component: 200  -  total flux cleaned = 0.00294726 Jy
! Total flux subtracted in 200 components = 0.00294726 Jy
! Clean residual min=-0.002380 max=0.002384 Jy/beam
! Clean residual mean=0.000002 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 0.0361866 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000679169 Jy
! Component: 100  -  total flux cleaned = 0.00167467 Jy
! Component: 150  -  total flux cleaned = 0.00292833 Jy
! Component: 200  -  total flux cleaned = 0.00334714 Jy
! Total flux subtracted in 200 components = 0.00334714 Jy
! Clean residual min=-0.001706 max=0.001704 Jy/beam
! Clean residual mean=-0.000007 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0395338 Jy
! Adding 281 model components to the UV plane model.
! The established model now contains 489 components and 0.0395338 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.726 mas, bmaj=7.185 mas, bpa=26.19 degrees
! Estimated noise=0.445629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239749 Jy
! Component: 100  -  total flux cleaned = 0.000463247 Jy
! Component: 150  -  total flux cleaned = 0.00113499 Jy
! Component: 200  -  total flux cleaned = 0.00182298 Jy
! Total flux subtracted in 200 components = 0.00182298 Jy
! Clean residual min=-0.000998 max=0.000996 Jy/beam
! Clean residual mean=-0.000005 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.0413567 Jy
selfcal
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 582 components and 0.0413567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051437Jy  sigma=0.556675
! Fit after  self-cal, rms=0.051377Jy  sigma=0.554352
wmodel J0117+8928_C_map.mod
! Writing 582 model components to file: J0117+8928_C_map.mod
wobs   J0117+8928_C_uvs.fits
! Writing UV FITS file: J0117+8928_C_uvs.fits
wwins  J0117+8928_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/sb072/temp_maps//J0117+8928_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.726 x 7.185 at 26.19 degrees (North through East)
! Clean map  min=-0.0043766  max=0.016998 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0117+8928_C_map.fits
wmodel /vlbi/sb072/temp_maps//J0117+8928_C_map.mod
! Writing 582 model components to file: /vlbi/sb072/temp_maps//J0117+8928_C_map.mod
wobs   /vlbi/sb072/temp_maps//J0117+8928_C_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J0117+8928_C_uvs.fits
wwins  /vlbi/sb072/temp_maps//J0117+8928_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0169985 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000521779 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -9.20869 9.20869 18.4174 36.8348 73.6695
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.016 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  32.577 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J0117+8928_C_dfm.log closed on Mon Nov 12 22:47:35 2018