! Started logfile: /vlbi/sb072/temp_maps//J0051-0650_X_dfm.log on Fri Jan 25 19:11:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J0051-0650_X_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0051-0650_X_uvm.fits ! AN table 1: 4 integrations on 21 of 21 possible baselines. ! AN table 2: 3 integrations on 28 of 28 possible baselines. ! AN table 3: 4 integrations on 28 of 28 possible baselines. ! AN table 4: 7 integrations on 36 of 36 possible baselines. ! AN table 5: 3 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.845754 visibilities/baseline/integration-bin. ! Found source: J0051-0650 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 3904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0051-0650_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.244648Jy sigma=51.030547 ! Fit after self-cal, rms=0.314422Jy sigma=13.100358 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8273 mas, bmaj=2.03 mas, bpa=-0.4716 degrees ! Estimated noise=0.439577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.526183 Jy ! Component: 100 - total flux cleaned = 0.651704 Jy ! Total flux subtracted in 100 components = 0.651704 Jy ! Clean residual min=-0.025115 max=0.048470 Jy/beam ! Clean residual mean=0.000083 rms=0.006025 Jy/beam ! Combined flux in latest and established models = 0.651705 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.651705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.127874Jy sigma=5.080654 ! Fit after self-cal, rms=0.127704Jy sigma=5.072547 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523852 Jy ! Component: 100 - total flux cleaned = 0.0776101 Jy ! Total flux subtracted in 100 components = 0.0776101 Jy ! Clean residual min=-0.018429 max=0.039598 Jy/beam ! Clean residual mean=0.000058 rms=0.004537 Jy/beam ! Combined flux in latest and established models = 0.729315 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.729315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097927Jy sigma=3.969571 ! Fit after self-cal, rms=0.097595Jy sigma=3.953928 ! Inverting map ! Added new window around map position (-2.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034111 Jy ! Component: 100 - total flux cleaned = 0.0518916 Jy ! Total flux subtracted in 100 components = 0.0518916 Jy ! Clean residual min=-0.013805 max=0.021844 Jy/beam ! Clean residual mean=0.000044 rms=0.003556 Jy/beam ! Combined flux in latest and established models = 0.781206 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 16 components and 0.781206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.084073Jy sigma=3.375407 ! Fit after self-cal, rms=0.083266Jy sigma=3.340723 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.151 mas, bmaj=2.682 mas, bpa=-3.294 degrees ! Estimated noise=0.287688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146557 Jy ! Component: 100 - total flux cleaned = 0.0221613 Jy ! Component: 150 - total flux cleaned = 0.0245802 Jy ! Component: 200 - total flux cleaned = 0.0250702 Jy ! Total flux subtracted in 200 components = 0.0250702 Jy ! Clean residual min=-0.014982 max=0.016375 Jy/beam ! Clean residual mean=0.000048 rms=0.003801 Jy/beam ! Combined flux in latest and established models = 0.806276 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.806276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.080565Jy sigma=3.237082 ! Fit after self-cal, rms=0.080276Jy sigma=3.226212 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.151 x 2.682 at -3.294 degrees (North through East) ! Clean map min=-0.013601 max=0.69536 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.09 KP 1.09 LA 1.08 ! NL 1.06 OV 1.07 PT 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.08 KP 0.95 LA 1.14 ! MK 1.03 NL 1.09 OV 0.95 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.94 HN 0.98 LA 0.94 ! NL 0.93 OV 0.96 PT 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 1.03 KP 0.95 LA 0.95 ! MK 1.00 NL 1.09 OV 0.97 PT 0.96 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.08 KP 1.02 LA 1.02 MK 1.09 ! OV 0.99 PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.09 KP 1.09 LA 1.07 ! NL 1.06 OV 1.11 PT 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.03 KP 0.89 LA 1.09 ! MK 0.98 NL 1.07 OV 0.93 PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.94 HN 1.00 LA 0.94 ! NL 0.94 OV 0.95 PT 0.91 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.03 KP 0.95 LA 0.96 ! MK 0.99 NL 1.08 OV 0.97 PT 0.98 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.02 KP 1.01 LA 1.04 MK 1.07 ! OV 0.98 PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.09 KP 1.07 LA 1.07 ! NL 1.06 OV 1.09 PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.11 KP 0.90 LA 1.08 ! MK 0.98 NL 1.04 OV 0.94 PT 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.93 HN 1.01 LA 0.93 ! NL 0.93 OV 0.95 PT 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 1.03 KP 0.96 LA 0.96 ! MK 0.98 NL 1.08 OV 0.97 PT 0.96 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.07 KP 1.01 LA 1.04 MK 1.06 ! OV 1.00 PT 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.07 KP 1.08 LA 1.06 ! NL 1.06 OV 1.10 PT 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.13 KP 0.93 LA 1.11 ! MK 1.02 NL 1.13 OV 0.96 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.93 HN 0.99 LA 0.94 ! NL 0.93 OV 0.95 PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.02 KP 0.95 LA 0.96 ! MK 0.99 NL 1.08 OV 0.97 PT 0.96 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 KP 1.01 LA 1.04 MK 1.06 ! OV 1.00 PT 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 KP 1.08 LA 1.09 ! NL 1.04 OV 1.10 PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.10 KP 0.94 LA 1.08 ! MK 0.96 NL 1.16 OV 0.95 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.92 HN 0.99 LA 0.93 ! NL 0.93 OV 0.94 PT 0.91 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 1.02 KP 0.94 LA 0.97 ! MK 0.97 NL 1.08 OV 0.95 PT 0.96 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.06 KP 1.00 LA 1.03 MK 1.07 ! OV 0.98 PT 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 KP 1.07 LA 1.07 ! NL 1.04 OV 1.09 PT 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.03 KP 0.98 LA 1.11 ! MK 1.06 NL 1.15 OV 0.98 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.92 HN 1.00 LA 0.92 ! NL 0.93 OV 0.95 PT 0.91 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 1.01 KP 0.95 LA 0.97 ! MK 0.99 NL 1.07 OV 0.96 PT 0.96 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 KP 1.00 LA 1.03 MK 1.06 ! OV 0.98 PT 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 KP 1.06 LA 1.06 ! NL 1.05 OV 1.12 PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.13 KP 0.95 LA 1.10 ! MK 1.04 NL 1.13 OV 0.95 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.91 HN 1.00 LA 0.93 ! NL 0.93 OV 0.95 PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 1.02 KP 0.94 LA 0.97 ! MK 0.98 NL 1.07 OV 0.97 PT 0.95 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.03 KP 1.01 LA 1.03 MK 1.05 ! OV 0.97 PT 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 KP 1.07 LA 1.07 ! NL 1.06 OV 1.09 PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.09 KP 0.93 LA 1.14 ! MK 1.00 NL 1.11 OV 0.93 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.92 HN 1.00 LA 0.92 ! NL 0.93 OV 0.94 PT 0.90 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 1.02 KP 0.94 LA 0.97 ! MK 0.97 NL 1.07 OV 0.95 PT 0.96 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.06 KP 1.00 LA 1.02 MK 1.05 ! OV 0.98 PT 1.02 ! ! ! Fit before self-cal, rms=0.080276Jy sigma=3.226212 ! Fit after self-cal, rms=0.033837Jy sigma=1.190834 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.155 mas, bmaj=2.676 mas, bpa=-3.248 degrees ! Estimated noise=0.287334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107003 Jy ! Component: 100 - total flux cleaned = 0.0171792 Jy ! Component: 150 - total flux cleaned = 0.0199949 Jy ! Component: 200 - total flux cleaned = 0.0221736 Jy ! Total flux subtracted in 200 components = 0.0221736 Jy ! Clean residual min=-0.005962 max=0.005266 Jy/beam ! Clean residual mean=0.000021 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.82845 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 0.82845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029516Jy sigma=0.980005 ! Fit after self-cal, rms=0.029366Jy sigma=0.973077 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029366Jy sigma=0.973077 ! Fit after self-cal, rms=0.029130Jy sigma=0.965320 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.155 mas, bmaj=2.674 mas, bpa=-3.178 degrees ! Estimated noise=0.286944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195943 Jy ! Component: 100 - total flux cleaned = 0.0025367 Jy ! Component: 150 - total flux cleaned = 0.00279275 Jy ! Component: 200 - total flux cleaned = 0.00302001 Jy ! Total flux subtracted in 200 components = 0.00302001 Jy ! Clean residual min=-0.004592 max=0.004904 Jy/beam ! Clean residual mean=0.000017 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.83147 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.83147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027935Jy sigma=0.905166 ! Fit after self-cal, rms=0.027881Jy sigma=0.903511 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035572 Jy ! Component: 100 - total flux cleaned = 0.00511222 Jy ! Component: 150 - total flux cleaned = 0.00629744 Jy ! Component: 200 - total flux cleaned = 0.00689098 Jy ! Total flux subtracted in 200 components = 0.00689098 Jy ! Clean residual min=-0.003327 max=0.003873 Jy/beam ! Clean residual mean=0.000014 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.838361 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 67 components and 0.838361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026616Jy sigma=0.839182 ! Fit after self-cal, rms=0.026590Jy sigma=0.837814 ! Inverting map ! Added new window around map position (4.4, -10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244667 Jy ! Component: 100 - total flux cleaned = 0.00312808 Jy ! Component: 150 - total flux cleaned = 0.00347256 Jy ! Component: 200 - total flux cleaned = 0.00370762 Jy ! Total flux subtracted in 200 components = 0.00370762 Jy ! Clean residual min=-0.002693 max=0.002911 Jy/beam ! Clean residual mean=0.000013 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.842069 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 83 components and 0.842069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025814Jy sigma=0.802349 ! Fit after self-cal, rms=0.025774Jy sigma=0.800739 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025774Jy sigma=0.800739 ! Fit after self-cal, rms=0.025425Jy sigma=0.785264 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.155 mas, bmaj=2.673 mas, bpa=-3.156 degrees ! Estimated noise=0.286999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101578 Jy ! Component: 100 - total flux cleaned = 0.00147571 Jy ! Component: 150 - total flux cleaned = 0.00182318 Jy ! Component: 200 - total flux cleaned = 0.0019508 Jy ! Total flux subtracted in 200 components = 0.0019508 Jy ! Clean residual min=-0.002608 max=0.002713 Jy/beam ! Clean residual mean=0.000011 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.844019 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 93 components and 0.844019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025012Jy sigma=0.765499 ! Fit after self-cal, rms=0.024996Jy sigma=0.764973 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239474 Jy ! Component: 100 - total flux cleaned = 0.00338346 Jy ! Component: 150 - total flux cleaned = 0.00385804 Jy ! Component: 200 - total flux cleaned = 0.00407394 Jy ! Total flux subtracted in 200 components = 0.00407394 Jy ! Clean residual min=-0.002360 max=0.002670 Jy/beam ! Clean residual mean=0.000010 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.848093 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 102 components and 0.848093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024613Jy sigma=0.747556 ! Fit after self-cal, rms=0.024598Jy sigma=0.746950 ! Inverting map ! Added new window around map position (-6.2, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210438 Jy ! Component: 100 - total flux cleaned = 0.00272911 Jy ! Component: 150 - total flux cleaned = 0.00283955 Jy ! Component: 200 - total flux cleaned = 0.00299427 Jy ! Total flux subtracted in 200 components = 0.00299427 Jy ! Clean residual min=-0.002276 max=0.002118 Jy/beam ! Clean residual mean=0.000008 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.851087 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 119 components and 0.851087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024233Jy sigma=0.729218 ! Fit after self-cal, rms=0.024221Jy sigma=0.728638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024221Jy sigma=0.728638 ! Fit after self-cal, rms=0.024149Jy sigma=0.726906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=4.53 mas, bpa=11.6 degrees ! Estimated noise=0.333391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000995828 Jy ! Component: 100 - total flux cleaned = 0.00112582 Jy ! Component: 150 - total flux cleaned = 0.00112761 Jy ! Component: 200 - total flux cleaned = 0.00109539 Jy ! Total flux subtracted in 200 components = 0.00109539 Jy ! Clean residual min=-0.002339 max=0.001978 Jy/beam ! Clean residual mean=0.000011 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.852183 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 138 components and 0.852183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024052Jy sigma=0.721344 ! Fit after self-cal, rms=0.024042Jy sigma=0.721004 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.72733e-05 Jy ! Component: 100 - total flux cleaned = -7.66188e-05 Jy ! Component: 150 - total flux cleaned = -7.62302e-05 Jy ! Component: 200 - total flux cleaned = -7.75693e-05 Jy ! Total flux subtracted in 200 components = -7.75693e-05 Jy ! Clean residual min=-0.002293 max=0.001947 Jy/beam ! Clean residual mean=0.000011 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.852105 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 0.852105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023987Jy sigma=0.718173 ! Fit after self-cal, rms=0.023983Jy sigma=0.717920 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.155 mas, bmaj=2.672 mas, bpa=-3.145 degrees ! Estimated noise=0.286995 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.155 x 2.672 at -3.145 degrees (North through East) ! Clean map min=-0.0021476 max=0.69572 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023983Jy sigma=0.717920 ! Fit after self-cal, rms=0.022375Jy sigma=0.676079 ! Inverting map and beam ! Estimated beam: bmin=1.154 mas, bmaj=2.671 mas, bpa=-3.145 degrees ! Estimated noise=0.287064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146161 Jy ! Component: 100 - total flux cleaned = 5.27089e-05 Jy ! Component: 150 - total flux cleaned = 5.24007e-05 Jy ! Component: 200 - total flux cleaned = -2.81744e-05 Jy ! Total flux subtracted in 200 components = -2.81744e-05 Jy ! Clean residual min=-0.002102 max=0.001701 Jy/beam ! Clean residual mean=0.000006 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.852077 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 166 components and 0.852077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022190Jy sigma=0.668234 ! Fit after self-cal, rms=0.022184Jy sigma=0.667887 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.89651e-05 Jy ! Component: 100 - total flux cleaned = -7.87043e-05 Jy ! Component: 150 - total flux cleaned = -0.000115824 Jy ! Component: 200 - total flux cleaned = -0.000116161 Jy ! Total flux subtracted in 200 components = -0.000116161 Jy ! Clean residual min=-0.002015 max=0.001678 Jy/beam ! Clean residual mean=0.000006 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.851961 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 172 components and 0.851961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022053Jy sigma=0.662575 ! Fit after self-cal, rms=0.022049Jy sigma=0.662325 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022049Jy sigma=0.662325 ! Fit after self-cal, rms=0.022035Jy sigma=0.661912 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8308 mas, bmaj=2.026 mas, bpa=-0.3104 degrees ! Estimated noise=0.437372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.523334 Jy ! Component: 100 - total flux cleaned = 0.651938 Jy ! Component: 150 - total flux cleaned = 0.705562 Jy ! Component: 200 - total flux cleaned = 0.737984 Jy ! Total flux subtracted in 200 components = 0.737984 Jy ! Clean residual min=-0.010796 max=0.021004 Jy/beam ! Clean residual mean=0.000033 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 0.737984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.737984 Jy ! Inverting map and beam ! Estimated beam: bmin=1.154 mas, bmaj=2.671 mas, bpa=-3.138 degrees ! Estimated noise=0.287136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304454 Jy ! Component: 100 - total flux cleaned = 0.0479575 Jy ! Component: 150 - total flux cleaned = 0.0599084 Jy ! Component: 200 - total flux cleaned = 0.0690625 Jy ! Total flux subtracted in 200 components = 0.0690625 Jy ! Clean residual min=-0.005617 max=0.006517 Jy/beam ! Clean residual mean=0.000028 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.807047 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 52 components and 0.807047 Jy ! Inverting map ! Added new window around map position (-8.2, 8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075884 Jy ! Component: 100 - total flux cleaned = 0.0131049 Jy ! Component: 150 - total flux cleaned = 0.0177995 Jy ! Component: 200 - total flux cleaned = 0.0214776 Jy ! Total flux subtracted in 200 components = 0.0214776 Jy ! Clean residual min=-0.003780 max=0.004225 Jy/beam ! Clean residual mean=0.000017 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.828525 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 70 components and 0.828525 Jy ! Inverting map ! Added new window around map position (-0.8, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443776 Jy ! Component: 100 - total flux cleaned = 0.00792979 Jy ! Component: 150 - total flux cleaned = 0.0108797 Jy ! Component: 200 - total flux cleaned = 0.0131706 Jy ! Total flux subtracted in 200 components = 0.0131706 Jy ! Clean residual min=-0.002900 max=0.003121 Jy/beam ! Clean residual mean=0.000011 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.841695 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 89 components and 0.841695 Jy ! Inverting map ! Added new window around map position (1.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012681 Jy ! Component: 100 - total flux cleaned = 0.00257308 Jy ! Component: 150 - total flux cleaned = 0.00382961 Jy ! Component: 200 - total flux cleaned = 0.0050478 Jy ! Total flux subtracted in 200 components = 0.0050478 Jy ! Clean residual min=-0.002460 max=0.002050 Jy/beam ! Clean residual mean=0.000008 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.846743 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 110 components and 0.846743 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=4.53 mas, bpa=11.59 degrees ! Estimated noise=0.33365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147064 Jy ! Component: 100 - total flux cleaned = 0.00245966 Jy ! Component: 150 - total flux cleaned = 0.00309873 Jy ! Component: 200 - total flux cleaned = 0.00342328 Jy ! Total flux subtracted in 200 components = 0.00342328 Jy ! Clean residual min=-0.002333 max=0.001701 Jy/beam ! Clean residual mean=0.000012 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.850166 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329703 Jy ! Component: 100 - total flux cleaned = 0.000480503 Jy ! Component: 150 - total flux cleaned = 0.000651493 Jy ! Component: 200 - total flux cleaned = 0.000747548 Jy ! Total flux subtracted in 200 components = 0.000747548 Jy ! Clean residual min=-0.002268 max=0.001582 Jy/beam ! Clean residual mean=0.000012 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.850914 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 148 components and 0.850914 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.154 mas, bmaj=2.671 mas, bpa=-3.138 degrees ! Estimated noise=0.287136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015811 Jy ! Component: 100 - total flux cleaned = -0.000460619 Jy ! Component: 150 - total flux cleaned = -0.000516011 Jy ! Component: 200 - total flux cleaned = -0.000623932 Jy ! Total flux subtracted in 200 components = -0.000623932 Jy ! Clean residual min=-0.002197 max=0.001746 Jy/beam ! Clean residual mean=0.000007 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.85029 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 167 components and 0.85029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022084Jy sigma=0.664605 ! Fit after self-cal, rms=0.021857Jy sigma=0.655975 wmodel J0051-0650_X_map.mod ! Writing 167 model components to file: J0051-0650_X_map.mod wobs J0051-0650_X_uvs.fits ! Writing UV FITS file: J0051-0650_X_uvs.fits wwins J0051-0650_X_map.win ! wwins: Wrote 11 windows to J0051-0650_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000701724 Jy ! Component: 100 - total flux cleaned = -0.00100348 Jy ! Component: 150 - total flux cleaned = -0.00119557 Jy ! Component: 200 - total flux cleaned = -0.00127329 Jy ! Component: 250 - total flux cleaned = -0.00120007 Jy ! Component: 300 - total flux cleaned = -0.00103603 Jy ! Component: 350 - total flux cleaned = -0.000877774 Jy ! Component: 400 - total flux cleaned = -0.000768325 Jy ! Component: 450 - total flux cleaned = -0.000662634 Jy ! Component: 500 - total flux cleaned = -0.000478782 Jy ! Component: 550 - total flux cleaned = -0.000499082 Jy ! Component: 600 - total flux cleaned = -0.00040142 Jy ! Component: 650 - total flux cleaned = -0.000362821 Jy ! Component: 700 - total flux cleaned = -0.000288586 Jy ! Component: 750 - total flux cleaned = -0.000252697 Jy ! Component: 800 - total flux cleaned = -0.000270568 Jy ! Component: 850 - total flux cleaned = -0.000252781 Jy ! Component: 900 - total flux cleaned = -0.000252633 Jy ! Component: 950 - total flux cleaned = -0.000252789 Jy ! Component: 1000 - total flux cleaned = -0.000269579 Jy ! Component: 1050 - total flux cleaned = -0.000302329 Jy ! Component: 1100 - total flux cleaned = -0.000302345 Jy ! Component: 1150 - total flux cleaned = -0.000350271 Jy ! Component: 1200 - total flux cleaned = -0.00039731 Jy ! Component: 1250 - total flux cleaned = -0.000459 Jy ! Component: 1300 - total flux cleaned = -0.000474245 Jy ! Component: 1350 - total flux cleaned = -0.000489306 Jy ! Component: 1400 - total flux cleaned = -0.000563614 Jy ! Component: 1450 - total flux cleaned = -0.000622076 Jy ! Component: 1500 - total flux cleaned = -0.000650855 Jy ! Component: 1550 - total flux cleaned = -0.000622257 Jy ! Component: 1600 - total flux cleaned = -0.000650517 Jy ! Component: 1650 - total flux cleaned = -0.000650575 Jy ! Component: 1700 - total flux cleaned = -0.00062317 Jy ! Component: 1750 - total flux cleaned = -0.000582287 Jy ! Component: 1800 - total flux cleaned = -0.000609372 Jy ! Component: 1850 - total flux cleaned = -0.000609471 Jy ! Component: 1900 - total flux cleaned = -0.0006492 Jy ! Component: 1950 - total flux cleaned = -0.000649274 Jy ! Component: 2000 - total flux cleaned = -0.000597563 Jy ! Component: 2050 - total flux cleaned = -0.000661523 Jy ! Component: 2100 - total flux cleaned = -0.000636193 Jy ! Component: 2150 - total flux cleaned = -0.000686296 Jy ! Component: 2200 - total flux cleaned = -0.000673809 Jy ! Component: 2250 - total flux cleaned = -0.000673613 Jy ! Component: 2300 - total flux cleaned = -0.000673555 Jy ! Component: 2350 - total flux cleaned = -0.000649299 Jy ! Component: 2400 - total flux cleaned = -0.000613572 Jy ! Component: 2450 - total flux cleaned = -0.000625501 Jy ! Component: 2500 - total flux cleaned = -0.000590546 Jy ! Component: 2550 - total flux cleaned = -0.000637027 Jy ! Component: 2600 - total flux cleaned = -0.00061405 Jy ! Component: 2650 - total flux cleaned = -0.000602579 Jy ! Component: 2700 - total flux cleaned = -0.000613858 Jy ! Component: 2750 - total flux cleaned = -0.00059149 Jy ! Component: 2800 - total flux cleaned = -0.000602832 Jy ! Component: 2850 - total flux cleaned = -0.00062494 Jy ! Component: 2900 - total flux cleaned = -0.000657435 Jy ! Component: 2950 - total flux cleaned = -0.000689742 Jy ! Component: 3000 - total flux cleaned = -0.000678861 Jy ! Component: 3050 - total flux cleaned = -0.000700019 Jy ! Component: 3100 - total flux cleaned = -0.000742076 Jy ! Component: 3150 - total flux cleaned = -0.000794332 Jy ! Component: 3200 - total flux cleaned = -0.000825322 Jy ! Component: 3250 - total flux cleaned = -0.000845823 Jy ! Component: 3300 - total flux cleaned = -0.000866254 Jy ! Component: 3350 - total flux cleaned = -0.000906673 Jy ! Component: 3400 - total flux cleaned = -0.000966841 Jy ! Component: 3450 - total flux cleaned = -0.000996706 Jy ! Component: 3500 - total flux cleaned = -0.00103625 Jy ! Component: 3550 - total flux cleaned = -0.00108533 Jy ! Component: 3600 - total flux cleaned = -0.00112445 Jy ! Component: 3650 - total flux cleaned = -0.00116311 Jy ! Component: 3700 - total flux cleaned = -0.00122062 Jy ! Component: 3750 - total flux cleaned = -0.00123972 Jy ! Component: 3800 - total flux cleaned = -0.00123971 Jy ! Component: 3850 - total flux cleaned = -0.0012867 Jy ! Component: 3900 - total flux cleaned = -0.00127739 Jy ! Component: 3950 - total flux cleaned = -0.00130517 Jy ! Component: 4000 - total flux cleaned = -0.0013513 Jy ! Component: 4050 - total flux cleaned = -0.00136962 Jy ! Total flux subtracted in 4096 components = -0.00142397 Jy ! Clean residual min=-0.000490 max=0.000539 Jy/beam ! Clean residual mean=0.000002 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.848866 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 438 components and 0.848866 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0051-0650_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.154 x 2.671 at -3.138 degrees (North through East) ! Clean map min=-0.0013772 max=0.69193 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0051-0650_X_map.fits wmodel /vlbi/sb072/temp_maps//J0051-0650_X_map.mod ! Writing 438 model components to file: /vlbi/sb072/temp_maps//J0051-0650_X_map.mod wobs /vlbi/sb072/temp_maps//J0051-0650_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0051-0650_X_uvs.fits wwins /vlbi/sb072/temp_maps//J0051-0650_X_map.win ! wwins: Wrote 12 windows to /vlbi/sb072/temp_maps//J0051-0650_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.691925 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161027 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.069817 0.069817 0.139634 0.279268 0.558536 1.11707 2.23415 4.46829 8.93658 17.8732 35.7463 71.4926 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.691 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4296.94 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0051-0650_X_dfm.log closed on Fri Jan 25 19:11:37 2019