! Started logfile: /vlbi/sb072/temp_maps//J0051-0650_C_dfm.log on Fri Jan 25 19:11:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/sb072/temp_maps//J0051-0650_C_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0051-0650_C_uvm.fits ! AN table 1: 4 integrations on 21 of 21 possible baselines. ! AN table 2: 3 integrations on 28 of 28 possible baselines. ! AN table 3: 4 integrations on 28 of 28 possible baselines. ! AN table 4: 7 integrations on 36 of 36 possible baselines. ! AN table 5: 3 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.845754 visibilities/baseline/integration-bin. ! Found source: J0051-0650 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 3904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J0051-0650_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.167613Jy sigma=50.366276 ! Fit after self-cal, rms=0.491731Jy sigma=20.727257 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.408 mas, bmaj=3.441 mas, bpa=0.9771 degrees ! Estimated noise=0.427795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.388129 Jy ! Component: 100 - total flux cleaned = 0.483779 Jy ! Total flux subtracted in 100 components = 0.483779 Jy ! Clean residual min=-0.033216 max=0.042089 Jy/beam ! Clean residual mean=0.000066 rms=0.006122 Jy/beam ! Combined flux in latest and established models = 0.483779 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.483779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.175047Jy sigma=7.278116 ! Fit after self-cal, rms=0.174986Jy sigma=7.275762 ! Inverting map ! Added new window around map position (-2.4, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484637 Jy ! Component: 100 - total flux cleaned = 0.0796378 Jy ! Total flux subtracted in 100 components = 0.0796378 Jy ! Clean residual min=-0.025075 max=0.027059 Jy/beam ! Clean residual mean=0.000044 rms=0.004967 Jy/beam ! Combined flux in latest and established models = 0.563417 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.563417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.150838Jy sigma=6.058561 ! Fit after self-cal, rms=0.150026Jy sigma=6.029029 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=4.534 mas, bpa=-2.335 degrees ! Estimated noise=0.289417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425024 Jy ! Component: 100 - total flux cleaned = 0.0673421 Jy ! Component: 150 - total flux cleaned = 0.0834192 Jy ! Component: 200 - total flux cleaned = 0.0939647 Jy ! Total flux subtracted in 200 components = 0.0939647 Jy ! Clean residual min=-0.022359 max=0.029910 Jy/beam ! Clean residual mean=0.000101 rms=0.006424 Jy/beam ! Combined flux in latest and established models = 0.657382 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.657382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.138667Jy sigma=5.387872 ! Fit after self-cal, rms=0.138192Jy sigma=5.367276 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.97 x 4.534 at -2.335 degrees (North through East) ! Clean map min=-0.020797 max=0.52262 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.22 KP 1.08 LA 1.29 ! MK 1.20 NL 1.14 OV 2.09 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.37 FD 1.34 HN 1.01 LA 2.50 ! NL 7.94 OV 2.02 PT 0.90 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.52 FD 1.30 KP 0.94 LA 1.00* ! MK 0.97 NL 1.00 OV 1.79 PT 1.39 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.19 KP 0.99 LA 1.10 MK 1.07 ! OV 1.72 PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.14 KP 1.04 LA 1.34 ! MK 1.11 NL 1.05 OV 1.84 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.19 FD 1.08 HN 0.98 LA 1.53 ! NL 3.93 OV 1.27 PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.70 FD 1.16 KP 0.95 LA 1.00* ! MK 0.96 NL 1.01 OV 1.35 PT 1.19 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.14 KP 0.98 LA 1.07 MK 1.08 ! OV 1.60 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 KP 1.03 LA 1.00 ! NL 0.94 OV 1.10 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.97 KP 0.94 LA 1.15 ! MK 1.13 NL 1.03 OV 1.20 PT 1.25 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.94 HN 0.92 LA 1.03 ! NL 1.48 OV 1.06 PT 0.87 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 0.96 KP 0.94 LA 0.96 ! MK 1.00 NL 1.08 OV 1.04 PT 0.92 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 KP 0.96 LA 1.02 MK 1.05 ! OV 1.13 PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 1.01 LA 0.82 ! NL 1.00 OV 1.05 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 KP 0.86 LA 1.04 ! MK 1.01 NL 1.06 OV 1.02 PT 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.92 HN 0.92 LA 0.98 ! NL 1.36 OV 0.77 PT 0.87 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.94 KP 0.93 LA 0.99 ! MK 1.02 NL 0.97 OV 1.01 PT 0.88 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.96 KP 0.95 LA 1.01 MK 1.05 ! OV 0.98 PT 0.90 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00 KP 0.99 LA 0.98 ! NL 0.96 OV 1.02 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.89 KP 0.87 LA 1.10 ! MK 0.96 NL 1.03 OV 0.97 PT 0.79 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.91 HN 0.92 LA 0.98 ! NL 1.24 OV 1.02 PT 0.86 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 FD 0.92 KP 0.92 LA 1.01 ! MK 1.00 NL 1.01 OV 1.00 PT 0.89 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.95 KP 0.94 LA 1.01 MK 1.04 ! OV 1.03 PT 0.88 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 KP 0.99 LA 0.98 ! NL 0.94 OV 1.01 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.94 KP 0.83 LA 1.09 ! MK 0.94 NL 1.08 OV 0.96 PT 0.78 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.89 HN 0.93 LA 0.99 ! NL 1.20 OV 1.01 PT 0.87 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.92 KP 0.91 LA 1.02 ! MK 0.99 NL 1.01 OV 1.00 PT 0.88 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.94 KP 0.94 LA 1.01 MK 1.02 ! OV 0.98 PT 0.90 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 KP 0.98 LA 0.96 ! NL 0.94 OV 1.03 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.91 KP 0.85 LA 1.10 ! MK 0.96 NL 1.08 OV 0.95 PT 0.77 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.89 HN 0.92 LA 0.98 ! NL 1.21 OV 1.01 PT 0.87 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.92 KP 0.91 LA 1.02 ! MK 0.98 NL 1.01 OV 1.00 PT 0.88 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.95 KP 0.94 LA 1.00 MK 1.01 ! OV 0.98 PT 0.88 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 KP 0.97 LA 0.96 ! NL 0.94 OV 1.01 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.87 KP 0.83 LA 1.12 ! MK 0.94 NL 1.06 OV 0.94 PT 0.79 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.90 HN 0.91 LA 0.98 ! NL 1.21 OV 1.01 PT 0.87 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.91 KP 0.91 LA 1.02 ! MK 0.98 NL 1.01 OV 0.99 PT 0.87 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.94 KP 0.94 LA 1.00 MK 1.02 ! OV 0.98 PT 0.88 ! ! ! Fit before self-cal, rms=0.138192Jy sigma=5.367276 ! Fit after self-cal, rms=0.153623Jy sigma=2.260559 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=4.58 mas, bpa=-2.497 degrees ! Estimated noise=0.289371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014821 Jy ! Component: 100 - total flux cleaned = 0.0228733 Jy ! Component: 150 - total flux cleaned = 0.0280387 Jy ! Component: 200 - total flux cleaned = 0.0306656 Jy ! Total flux subtracted in 200 components = 0.0306656 Jy ! Clean residual min=-0.006372 max=0.009277 Jy/beam ! Clean residual mean=0.000026 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.688048 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 0.688048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.151918Jy sigma=2.055815 ! Fit after self-cal, rms=0.151930Jy sigma=2.045666 ! Inverting map ! Added new window around map position (-6, 5.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091522 Jy ! Component: 100 - total flux cleaned = 0.0134064 Jy ! Component: 150 - total flux cleaned = 0.0138345 Jy ! Component: 200 - total flux cleaned = 0.0139648 Jy ! Total flux subtracted in 200 components = 0.0139648 Jy ! Clean residual min=-0.004776 max=0.006330 Jy/beam ! Clean residual mean=0.000011 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.702012 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.702012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.151277Jy sigma=1.965324 ! Fit after self-cal, rms=0.151217Jy sigma=1.956638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.151217Jy sigma=1.956638 ! Fit after self-cal, rms=0.152302Jy sigma=1.940502 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=4.582 mas, bpa=-2.472 degrees ! Estimated noise=0.289546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426251 Jy ! Component: 100 - total flux cleaned = 0.00506162 Jy ! Component: 150 - total flux cleaned = 0.0052967 Jy ! Component: 200 - total flux cleaned = 0.00550401 Jy ! Total flux subtracted in 200 components = 0.00550401 Jy ! Clean residual min=-0.004490 max=0.005377 Jy/beam ! Clean residual mean=0.000012 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.707516 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.707516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.152014Jy sigma=1.913985 ! Fit after self-cal, rms=0.152001Jy sigma=1.911981 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 21.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286379 Jy ! Component: 100 - total flux cleaned = 0.00403024 Jy ! Component: 150 - total flux cleaned = 0.00421318 Jy ! Component: 200 - total flux cleaned = 0.00464407 Jy ! Total flux subtracted in 200 components = 0.00464407 Jy ! Clean residual min=-0.004143 max=0.004972 Jy/beam ! Clean residual mean=0.000007 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.712161 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 118 components and 0.712161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.151702Jy sigma=1.885021 ! Fit after self-cal, rms=0.151697Jy sigma=1.883956 ! Inverting map ! Added new window around map position (34.8, -54.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105997 Jy ! Component: 100 - total flux cleaned = 0.00055933 Jy ! Component: 150 - total flux cleaned = 0.000359098 Jy ! Component: 200 - total flux cleaned = 0.000625435 Jy ! Total flux subtracted in 200 components = 0.000625435 Jy ! Clean residual min=-0.004102 max=0.004634 Jy/beam ! Clean residual mean=0.000006 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.712786 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 139 components and 0.712786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.150976Jy sigma=1.875705 ! Fit after self-cal, rms=0.150955Jy sigma=1.873185 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.150955Jy sigma=1.873185 ! Fit after self-cal, rms=0.056982Jy sigma=0.881344 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.969 mas, bmaj=4.575 mas, bpa=-2.4 degrees ! Estimated noise=0.288898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000568264 Jy ! Component: 100 - total flux cleaned = -0.000405863 Jy ! Component: 150 - total flux cleaned = -0.000106656 Jy ! Component: 200 - total flux cleaned = 3.1983e-05 Jy ! Total flux subtracted in 200 components = 3.1983e-05 Jy ! Clean residual min=-0.002926 max=0.002602 Jy/beam ! Clean residual mean=0.000006 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.712818 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 162 components and 0.712818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056770Jy sigma=0.856786 ! Fit after self-cal, rms=0.056954Jy sigma=0.855867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134735 Jy ! Component: 100 - total flux cleaned = 0.000261752 Jy ! Component: 150 - total flux cleaned = 0.000381167 Jy ! Component: 200 - total flux cleaned = 0.00043969 Jy ! Total flux subtracted in 200 components = 0.00043969 Jy ! Clean residual min=-0.002736 max=0.002399 Jy/beam ! Clean residual mean=0.000005 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.713258 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 177 components and 0.713258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056831Jy sigma=0.842149 ! Fit after self-cal, rms=0.056825Jy sigma=0.841773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056825Jy sigma=0.841773 ! Fit after self-cal, rms=0.056796Jy sigma=0.840198 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.384 mas, bmaj=7.909 mas, bpa=11.54 degrees ! Estimated noise=0.336222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503604 Jy ! Component: 100 - total flux cleaned = 0.000963566 Jy ! Component: 150 - total flux cleaned = 0.00130841 Jy ! Component: 200 - total flux cleaned = 0.00144201 Jy ! Total flux subtracted in 200 components = 0.00144201 Jy ! Clean residual min=-0.003005 max=0.002315 Jy/beam ! Clean residual mean=0.000006 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.7147 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 199 components and 0.7147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056723Jy sigma=0.833101 ! Fit after self-cal, rms=0.056717Jy sigma=0.832509 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44852e-06 Jy ! Component: 100 - total flux cleaned = 8.24472e-05 Jy ! Component: 150 - total flux cleaned = 0.000265507 Jy ! Component: 200 - total flux cleaned = 0.000437826 Jy ! Total flux subtracted in 200 components = 0.000437826 Jy ! Clean residual min=-0.002837 max=0.002213 Jy/beam ! Clean residual mean=0.000005 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.715138 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 216 components and 0.715138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056683Jy sigma=0.829198 ! Fit after self-cal, rms=0.056681Jy sigma=0.828855 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=4.575 mas, bpa=-2.419 degrees ! Estimated noise=0.288629 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.968 x 4.575 at -2.419 degrees (North through East) ! Clean map min=-0.0032063 max=0.52367 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056681Jy sigma=0.828855 ! Fit after self-cal, rms=0.058580Jy sigma=0.730684 ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=4.577 mas, bpa=-2.43 degrees ! Estimated noise=0.288539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320853 Jy ! Component: 100 - total flux cleaned = -0.000270026 Jy ! Component: 150 - total flux cleaned = -0.000366193 Jy ! Component: 200 - total flux cleaned = -0.000411555 Jy ! Total flux subtracted in 200 components = -0.000411555 Jy ! Clean residual min=-0.002314 max=0.002035 Jy/beam ! Clean residual mean=0.000004 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.714726 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 227 components and 0.714726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.058506Jy sigma=0.719727 ! Fit after self-cal, rms=0.058500Jy sigma=0.719324 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74341e-05 Jy ! Component: 100 - total flux cleaned = 3.92764e-05 Jy ! Component: 150 - total flux cleaned = 3.9099e-05 Jy ! Component: 200 - total flux cleaned = 7.67344e-05 Jy ! Total flux subtracted in 200 components = 7.67344e-05 Jy ! Clean residual min=-0.002219 max=0.001976 Jy/beam ! Clean residual mean=0.000004 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.714803 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 238 components and 0.714803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.058453Jy sigma=0.712318 ! Fit after self-cal, rms=0.058449Jy sigma=0.712034 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.058449Jy sigma=0.712034 ! Fit after self-cal, rms=0.058562Jy sigma=0.711442 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.4 mas, bmaj=3.446 mas, bpa=0.9464 degrees ! Estimated noise=0.425507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.386049 Jy ! Component: 100 - total flux cleaned = 0.485242 Jy ! Component: 150 - total flux cleaned = 0.53737 Jy ! Component: 200 - total flux cleaned = 0.570433 Jy ! Total flux subtracted in 200 components = 0.570433 Jy ! Clean residual min=-0.012823 max=0.017746 Jy/beam ! Clean residual mean=0.000036 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 0.570433 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.570433 Jy ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=4.577 mas, bpa=-2.451 degrees ! Estimated noise=0.288507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353953 Jy ! Component: 100 - total flux cleaned = 0.0576879 Jy ! Component: 150 - total flux cleaned = 0.0738921 Jy ! Component: 200 - total flux cleaned = 0.0859381 Jy ! Total flux subtracted in 200 components = 0.0859381 Jy ! Clean residual min=-0.005393 max=0.007469 Jy/beam ! Clean residual mean=0.000066 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 0.656371 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 52 components and 0.656371 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.383 mas, bmaj=7.912 mas, bpa=11.49 degrees ! Estimated noise=0.336093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130485 Jy ! Component: 100 - total flux cleaned = 0.022109 Jy ! Component: 150 - total flux cleaned = 0.0287555 Jy ! Component: 200 - total flux cleaned = 0.03384 Jy ! Total flux subtracted in 200 components = 0.03384 Jy ! Clean residual min=-0.003732 max=0.004573 Jy/beam ! Clean residual mean=0.000051 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.690211 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041522 Jy ! Component: 100 - total flux cleaned = 0.00759086 Jy ! Component: 150 - total flux cleaned = 0.0104623 Jy ! Component: 200 - total flux cleaned = 0.012911 Jy ! Total flux subtracted in 200 components = 0.012911 Jy ! Clean residual min=-0.003066 max=0.003020 Jy/beam ! Clean residual mean=0.000029 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.703122 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 135 components and 0.703122 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=4.577 mas, bpa=-2.451 degrees ! Estimated noise=0.288507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021238 Jy ! Component: 100 - total flux cleaned = 0.00353761 Jy ! Component: 150 - total flux cleaned = 0.0044314 Jy ! Component: 200 - total flux cleaned = 0.00473352 Jy ! Total flux subtracted in 200 components = 0.00473352 Jy ! Clean residual min=-0.002908 max=0.002865 Jy/beam ! Clean residual mean=0.000012 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.707856 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 0.707856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059413Jy sigma=0.797131 ! Fit after self-cal, rms=0.059285Jy sigma=0.781118 wmodel J0051-0650_C_map.mod ! Writing 150 model components to file: J0051-0650_C_map.mod wobs J0051-0650_C_uvs.fits ! Writing UV FITS file: J0051-0650_C_uvs.fits wwins J0051-0650_C_map.win ! wwins: Wrote 6 windows to J0051-0650_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869025 Jy ! Component: 100 - total flux cleaned = 0.00100709 Jy ! Component: 150 - total flux cleaned = 0.00117795 Jy ! Component: 200 - total flux cleaned = 0.00130142 Jy ! Component: 250 - total flux cleaned = 0.00153655 Jy ! Component: 300 - total flux cleaned = 0.00176227 Jy ! Component: 350 - total flux cleaned = 0.00194345 Jy ! Component: 400 - total flux cleaned = 0.00211878 Jy ! Component: 450 - total flux cleaned = 0.00235557 Jy ! Component: 500 - total flux cleaned = 0.0026509 Jy ! Component: 550 - total flux cleaned = 0.00290608 Jy ! Component: 600 - total flux cleaned = 0.00312354 Jy ! Component: 650 - total flux cleaned = 0.00336684 Jy ! Component: 700 - total flux cleaned = 0.00357471 Jy ! Component: 750 - total flux cleaned = 0.00380723 Jy ! Component: 800 - total flux cleaned = 0.00400599 Jy ! Component: 850 - total flux cleaned = 0.00425576 Jy ! Component: 900 - total flux cleaned = 0.00439134 Jy ! Component: 950 - total flux cleaned = 0.00449723 Jy ! Component: 1000 - total flux cleaned = 0.00460096 Jy ! Component: 1050 - total flux cleaned = 0.00457572 Jy ! Component: 1100 - total flux cleaned = 0.00467678 Jy ! Component: 1150 - total flux cleaned = 0.00467719 Jy ! Component: 1200 - total flux cleaned = 0.00479861 Jy ! Component: 1250 - total flux cleaned = 0.00479841 Jy ! Component: 1300 - total flux cleaned = 0.00489312 Jy ! Component: 1350 - total flux cleaned = 0.00491596 Jy ! Component: 1400 - total flux cleaned = 0.00491579 Jy ! Component: 1450 - total flux cleaned = 0.00498324 Jy ! Component: 1500 - total flux cleaned = 0.00496109 Jy ! Component: 1550 - total flux cleaned = 0.00500516 Jy ! Component: 1600 - total flux cleaned = 0.00504854 Jy ! Component: 1650 - total flux cleaned = 0.00511234 Jy ! Component: 1700 - total flux cleaned = 0.00517512 Jy ! Component: 1750 - total flux cleaned = 0.0052368 Jy ! Component: 1800 - total flux cleaned = 0.00525716 Jy ! Component: 1850 - total flux cleaned = 0.00529756 Jy ! Component: 1900 - total flux cleaned = 0.00535764 Jy ! Component: 1950 - total flux cleaned = 0.00549595 Jy ! Component: 2000 - total flux cleaned = 0.00553499 Jy ! Component: 2050 - total flux cleaned = 0.00561184 Jy ! Component: 2100 - total flux cleaned = 0.00568799 Jy ! Component: 2150 - total flux cleaned = 0.0056882 Jy ! Component: 2200 - total flux cleaned = 0.00578147 Jy ! Component: 2250 - total flux cleaned = 0.00579992 Jy ! Component: 2300 - total flux cleaned = 0.00585466 Jy ! Component: 2350 - total flux cleaned = 0.00590872 Jy ! Component: 2400 - total flux cleaned = 0.00596195 Jy ! Component: 2450 - total flux cleaned = 0.00597957 Jy ! Component: 2500 - total flux cleaned = 0.00599693 Jy ! Component: 2550 - total flux cleaned = 0.00608309 Jy ! Component: 2600 - total flux cleaned = 0.00604879 Jy ! Component: 2650 - total flux cleaned = 0.00606573 Jy ! Component: 2700 - total flux cleaned = 0.00608231 Jy ! Component: 2750 - total flux cleaned = 0.00603233 Jy ! Component: 2800 - total flux cleaned = 0.00601611 Jy ! Component: 2850 - total flux cleaned = 0.00608155 Jy ! Component: 2900 - total flux cleaned = 0.00606542 Jy ! Component: 2950 - total flux cleaned = 0.00606529 Jy ! Component: 3000 - total flux cleaned = 0.0060653 Jy ! Component: 3050 - total flux cleaned = 0.00608085 Jy ! Component: 3100 - total flux cleaned = 0.00603434 Jy ! Component: 3150 - total flux cleaned = 0.00612677 Jy ! Component: 3200 - total flux cleaned = 0.0060961 Jy ! Component: 3250 - total flux cleaned = 0.00606561 Jy ! Component: 3300 - total flux cleaned = 0.00605054 Jy ! Component: 3350 - total flux cleaned = 0.00605054 Jy ! Component: 3400 - total flux cleaned = 0.00602124 Jy ! Component: 3450 - total flux cleaned = 0.00607965 Jy ! Component: 3500 - total flux cleaned = 0.00605074 Jy ! Component: 3550 - total flux cleaned = 0.00602215 Jy ! Component: 3600 - total flux cleaned = 0.0059791 Jy ! Component: 3650 - total flux cleaned = 0.00599328 Jy ! Component: 3700 - total flux cleaned = 0.00593701 Jy ! Component: 3750 - total flux cleaned = 0.00597908 Jy ! Component: 3800 - total flux cleaned = 0.00597916 Jy ! Component: 3850 - total flux cleaned = 0.00602031 Jy ! Component: 3900 - total flux cleaned = 0.00599282 Jy ! Component: 3950 - total flux cleaned = 0.00599271 Jy ! Component: 4000 - total flux cleaned = 0.00600607 Jy ! Component: 4050 - total flux cleaned = 0.00589932 Jy ! Total flux subtracted in 4096 components = 0.00595249 Jy ! Clean residual min=-0.000666 max=0.000666 Jy/beam ! Clean residual mean=0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.713808 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 389 components and 0.713809 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0051-0650_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.968 x 4.577 at -2.451 degrees (North through East) ! Clean map min=-0.0016937 max=0.52633 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0051-0650_C_map.fits wmodel /vlbi/sb072/temp_maps//J0051-0650_C_map.mod ! Writing 389 model components to file: /vlbi/sb072/temp_maps//J0051-0650_C_map.mod wobs /vlbi/sb072/temp_maps//J0051-0650_C_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0051-0650_C_uvs.fits wwins /vlbi/sb072/temp_maps//J0051-0650_C_map.win ! wwins: Wrote 7 windows to /vlbi/sb072/temp_maps//J0051-0650_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.526327 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228003 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.129959 0.129959 0.259918 0.519836 1.03967 2.07934 4.15869 8.31737 16.6347 33.2695 66.539 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.526 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2308.42 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0051-0650_C_dfm.log closed on Fri Jan 25 19:11:32 2019