! Started logfile: /vlbi/sb072/temp_maps//J0017+8135_X_b_dfm.log on Sat Dec 15 22:19:44 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J0017+8135_X_b_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0017+8135_X_b_uvm.fits ! AN table 1: 7 integrations on 3 of 3 possible baselines. ! AN table 2: 21 integrations on 28 of 28 possible baselines. ! AN table 3: 4 integrations on 15 of 15 possible baselines. ! AN table 4: 10 integrations on 28 of 28 possible baselines. ! AN table 5: 4 integrations on 15 of 15 possible baselines. ! AN table 6: 14 integrations on 21 of 21 possible baselines. ! AN table 7: 23 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.614735 visibilities/baseline/integration-bin. ! Found source: J0017+8135 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 10480 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0017+8135_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 6. ! A total of 60 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.514764Jy sigma=58.384805 ! Fit after self-cal, rms=0.268026Jy sigma=10.057608 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=1.638 mas, bpa=82.71 degrees ! Estimated noise=0.316457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.793867 Jy ! Component: 100 - total flux cleaned = 1.03845 Jy ! Total flux subtracted in 100 components = 1.03845 Jy ! Clean residual min=-0.029537 max=0.112895 Jy/beam ! Clean residual mean=0.000075 rms=0.006876 Jy/beam ! Combined flux in latest and established models = 1.03845 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.03845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.225708Jy sigma=8.696451 ! Fit after self-cal, rms=0.225480Jy sigma=8.688963 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126458 Jy ! Component: 100 - total flux cleaned = 0.193671 Jy ! Total flux subtracted in 100 components = 0.193671 Jy ! Clean residual min=-0.024708 max=0.040261 Jy/beam ! Clean residual mean=0.000002 rms=0.003936 Jy/beam ! Combined flux in latest and established models = 1.23212 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 1.23212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.122175Jy sigma=4.576658 ! Fit after self-cal, rms=0.121856Jy sigma=4.565892 ! Inverting map ! Added new window around map position (-1.2, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422767 Jy ! Component: 100 - total flux cleaned = 0.0648312 Jy ! Total flux subtracted in 100 components = 0.0648312 Jy ! Clean residual min=-0.023341 max=0.032966 Jy/beam ! Clean residual mean=-0.000023 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 1.29695 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 1.29695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.107543Jy sigma=4.009484 ! Fit after self-cal, rms=0.106763Jy sigma=3.982732 ! Inverting map ! Added new window around map position (1, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207272 Jy ! Component: 100 - total flux cleaned = 0.0249059 Jy ! Total flux subtracted in 100 components = 0.0249059 Jy ! Clean residual min=-0.021028 max=0.014289 Jy/beam ! Clean residual mean=-0.000032 rms=0.003168 Jy/beam ! Combined flux in latest and established models = 1.32186 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 1.32186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.102206Jy sigma=3.798228 ! Fit after self-cal, rms=0.102111Jy sigma=3.793791 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.632 mas, bmaj=2.225 mas, bpa=88.92 degrees ! Estimated noise=0.188611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00919013 Jy ! Component: 100 - total flux cleaned = -0.0109807 Jy ! Component: 150 - total flux cleaned = -0.0121622 Jy ! Component: 200 - total flux cleaned = -0.0132055 Jy ! Total flux subtracted in 200 components = -0.0132055 Jy ! Clean residual min=-0.020591 max=0.013019 Jy/beam ! Clean residual mean=-0.000111 rms=0.003467 Jy/beam ! Combined flux in latest and established models = 1.30865 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 1.30865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099177Jy sigma=3.667523 ! Fit after self-cal, rms=0.099157Jy sigma=3.666704 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.632 x 2.225 at 88.92 degrees (North through East) ! Clean map min=-0.019822 max=1.1016 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.03 HN 0.93 KP 0.99 ! LA 1.03 NL 1.07 OV 0.96 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 KP 0.98 LA 1.03 OV 0.91 ! PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.06 HN 0.97 KP 0.99 ! LA 1.04 OV 1.00 PT 1.01 SC 1.02 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 KP 0.98 MK 1.13 OV 0.91 ! PT 0.99 SC 1.04 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.90 FD 1.04 KP 0.97 LA 1.02 ! NL 1.04 OV 0.95 PT 1.02 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.91 FD 1.03 HN 0.91 KP 0.99 ! LA 1.02 NL 1.08 OV 0.97 PT 1.00 ! SC 1.08 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.01 HN 0.93 KP 0.99 ! LA 1.02 NL 1.06 OV 0.98 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 KP 0.98 LA 0.99 OV 0.93 ! PT 0.98 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.05 HN 0.96 KP 0.99 ! LA 1.04 OV 1.00 PT 1.02 SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00 KP 0.98 MK 1.14 OV 0.93 ! PT 0.99 SC 1.05 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.90 FD 1.03 KP 0.97 LA 1.03 ! NL 1.04 OV 0.96 PT 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.91 FD 1.03 HN 0.91 KP 0.99 ! LA 1.02 NL 1.08 OV 0.97 PT 1.00 ! SC 1.08 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.02 HN 0.93 KP 1.00 ! LA 1.02 NL 1.06 OV 0.97 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 KP 0.99 LA 1.00 OV 0.94 ! PT 0.99 SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.05 HN 0.95 KP 1.00 ! LA 1.03 OV 1.00 PT 1.01 SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.02 KP 0.97 MK 1.11 OV 0.95 ! PT 1.02 SC 1.06 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.89 FD 1.03 KP 0.97 LA 1.03 ! NL 1.04 OV 0.97 PT 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.91 FD 1.03 HN 0.90 KP 0.99 ! LA 1.02 NL 1.08 OV 0.97 PT 1.00 ! SC 1.09 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.03 HN 0.93 KP 0.99 ! LA 1.04 NL 1.06 OV 0.98 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 KP 0.99 LA 1.02 OV 0.94 ! PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.06 HN 0.98 KP 0.99 ! LA 1.04 OV 1.00 PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 KP 0.98 MK 1.15 OV 0.95 ! PT 1.01 SC 1.06 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.90 FD 1.03 KP 0.97 LA 1.03 ! NL 1.05 OV 0.97 PT 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.91 FD 1.03 HN 0.91 KP 1.00 ! LA 1.02 NL 1.08 OV 0.98 PT 1.01 ! SC 1.11 ! ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.04 HN 0.94 KP 0.99 ! LA 1.03 NL 1.07 OV 0.98 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 KP 0.97 LA 1.00 OV 0.94 ! PT 1.01 SC 1.11 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.90 FD 1.07 HN 0.99 KP 1.01 ! LA 1.03 OV 1.00 PT 1.02 SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 KP 0.98 MK 1.17 OV 0.95 ! PT 1.02 SC 1.09 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.91 FD 1.04 KP 0.97 LA 1.03 ! NL 1.06 OV 0.97 PT 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.92 FD 1.04 HN 0.92 KP 1.00 ! LA 1.03 NL 1.09 OV 0.98 PT 1.01 ! SC 1.13 ! ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.04 HN 0.94 KP 1.01 ! LA 1.04 NL 1.06 OV 0.99 PT 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 KP 1.00 LA 1.02 OV 0.95 ! PT 1.01 SC 1.08 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.07 HN 1.00 KP 1.01 ! LA 1.04 OV 1.01 PT 1.03 SC 1.07 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 KP 1.01 MK 1.16 OV 0.96 ! PT 1.02 SC 1.10 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.91 FD 1.04 KP 0.99 LA 1.05 ! NL 1.07 OV 0.98 PT 1.06 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.92 FD 1.04 HN 0.92 KP 1.01 ! LA 1.03 NL 1.09 OV 0.98 PT 1.01 ! SC 1.13 ! ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.04 HN 0.96 KP 1.00 ! LA 1.05 NL 1.07 OV 0.98 PT 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 KP 0.98 LA 1.02 OV 0.93 ! PT 1.00 SC 1.11 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.06 HN 1.00 KP 1.02 ! LA 1.05 OV 1.00 PT 1.02 SC 1.07 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.02 KP 0.99 MK 1.18 OV 0.96 ! PT 1.03 SC 1.10 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 1.03 KP 0.97 LA 1.04 ! NL 1.06 OV 0.97 PT 1.04 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.92 FD 1.04 HN 0.93 KP 1.00 ! LA 1.03 NL 1.08 OV 0.98 PT 1.01 ! SC 1.15 ! ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.04 HN 0.93 KP 1.00 ! LA 1.05 NL 1.07 OV 0.98 PT 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 KP 0.98 LA 1.03 OV 0.93 ! PT 1.02 SC 1.10 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.06 HN 0.99 KP 1.02 ! LA 1.04 OV 1.01 PT 1.02 SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.03 KP 0.98 MK 1.20 OV 0.97 ! PT 1.01 SC 1.11 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 1.04 KP 0.98 LA 1.04 ! NL 1.06 OV 0.98 PT 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.92 FD 1.04 HN 0.93 KP 1.01 ! LA 1.03 NL 1.09 OV 0.98 PT 1.01 ! SC 1.15 ! ! ! Fit before self-cal, rms=0.099157Jy sigma=3.666704 ! Fit after self-cal, rms=0.060766Jy sigma=2.074444 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.626 mas, bmaj=2.286 mas, bpa=88.45 degrees ! Estimated noise=0.189009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00489262 Jy ! Component: 100 - total flux cleaned = -0.0049303 Jy ! Component: 150 - total flux cleaned = -0.00465341 Jy ! Component: 200 - total flux cleaned = -0.00491245 Jy ! Total flux subtracted in 200 components = -0.00491245 Jy ! Clean residual min=-0.007032 max=0.007831 Jy/beam ! Clean residual mean=0.000003 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 1.30374 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 1.30374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056203Jy sigma=1.918378 ! Fit after self-cal, rms=0.056146Jy sigma=1.915892 ! Inverting map ! Added new window around map position (31.6, 23.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043543 Jy ! Component: 100 - total flux cleaned = 0.00499406 Jy ! Component: 150 - total flux cleaned = 0.00558608 Jy ! Component: 200 - total flux cleaned = 0.00613757 Jy ! Total flux subtracted in 200 components = 0.00613757 Jy ! Clean residual min=-0.007114 max=0.006950 Jy/beam ! Clean residual mean=0.000007 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 1.30988 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 1.30988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054399Jy sigma=1.855681 ! Fit after self-cal, rms=0.054313Jy sigma=1.852611 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054313Jy sigma=1.852611 ! Fit after self-cal, rms=0.038761Jy sigma=1.295434 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.621 mas, bmaj=2.278 mas, bpa=88.09 degrees ! Estimated noise=0.188978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012224 Jy ! Component: 100 - total flux cleaned = -0.00103406 Jy ! Component: 150 - total flux cleaned = -0.000539278 Jy ! Component: 200 - total flux cleaned = -0.000245541 Jy ! Total flux subtracted in 200 components = -0.000245541 Jy ! Clean residual min=-0.003768 max=0.005651 Jy/beam ! Clean residual mean=0.000019 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 1.30963 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 1.30963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036793Jy sigma=1.231949 ! Fit after self-cal, rms=0.036723Jy sigma=1.229568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304291 Jy ! Component: 100 - total flux cleaned = 0.00318098 Jy ! Component: 150 - total flux cleaned = 0.00344027 Jy ! Component: 200 - total flux cleaned = 0.00392285 Jy ! Total flux subtracted in 200 components = 0.00392285 Jy ! Clean residual min=-0.003621 max=0.004970 Jy/beam ! Clean residual mean=0.000013 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 1.31355 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 1.31355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035536Jy sigma=1.184199 ! Fit after self-cal, rms=0.035482Jy sigma=1.182456 ! Inverting map ! Added new window around map position (-1.6, -9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435361 Jy ! Component: 100 - total flux cleaned = 0.00519123 Jy ! Component: 150 - total flux cleaned = 0.00573669 Jy ! Component: 200 - total flux cleaned = 0.00624561 Jy ! Total flux subtracted in 200 components = 0.00624561 Jy ! Clean residual min=-0.003658 max=0.002984 Jy/beam ! Clean residual mean=0.000008 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 1.3198 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 85 components and 1.3198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034592Jy sigma=1.150135 ! Fit after self-cal, rms=0.034556Jy sigma=1.149134 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034556Jy sigma=1.149134 ! Fit after self-cal, rms=0.030425Jy sigma=0.956356 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.617 mas, bmaj=2.274 mas, bpa=87.96 degrees ! Estimated noise=0.188981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033709 Jy ! Component: 100 - total flux cleaned = 0.000330692 Jy ! Component: 150 - total flux cleaned = 0.00089058 Jy ! Component: 200 - total flux cleaned = 0.00130505 Jy ! Total flux subtracted in 200 components = 0.00130505 Jy ! Clean residual min=-0.002863 max=0.002540 Jy/beam ! Clean residual mean=0.000008 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 1.3211 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 1.3211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029447Jy sigma=0.921265 ! Fit after self-cal, rms=0.029414Jy sigma=0.920411 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351653 Jy ! Component: 100 - total flux cleaned = 0.000442918 Jy ! Component: 150 - total flux cleaned = 0.00061482 Jy ! Component: 200 - total flux cleaned = 0.000853927 Jy ! Total flux subtracted in 200 components = 0.000853927 Jy ! Clean residual min=-0.002805 max=0.002431 Jy/beam ! Clean residual mean=0.000006 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 1.32196 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 1.32196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028897Jy sigma=0.901657 ! Fit after self-cal, rms=0.028875Jy sigma=0.901109 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028875Jy sigma=0.901109 ! Fit after self-cal, rms=0.028580Jy sigma=0.890635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.536 mas, bmaj=3.568 mas, bpa=-84.85 degrees ! Estimated noise=0.205115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422789 Jy ! Component: 100 - total flux cleaned = 0.000670932 Jy ! Component: 150 - total flux cleaned = 0.000927847 Jy ! Component: 200 - total flux cleaned = 0.00125197 Jy ! Total flux subtracted in 200 components = 0.00125197 Jy ! Clean residual min=-0.002096 max=0.002091 Jy/beam ! Clean residual mean=0.000009 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 1.32321 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 123 components and 1.32321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028321Jy sigma=0.879804 ! Fit after self-cal, rms=0.028299Jy sigma=0.879093 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185797 Jy ! Component: 100 - total flux cleaned = 0.000226797 Jy ! Component: 150 - total flux cleaned = 0.000299252 Jy ! Component: 200 - total flux cleaned = 0.000367089 Jy ! Total flux subtracted in 200 components = 0.000367089 Jy ! Clean residual min=-0.002049 max=0.001974 Jy/beam ! Clean residual mean=0.000007 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 1.32358 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 1.32358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028173Jy sigma=0.873843 ! Fit after self-cal, rms=0.028168Jy sigma=0.873677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.614 mas, bmaj=2.271 mas, bpa=87.85 degrees ! Estimated noise=0.188985 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.614 x 2.271 at 87.85 degrees (North through East) ! Clean map min=-0.0052073 max=1.0976 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028168Jy sigma=0.873677 ! Fit after self-cal, rms=0.025859Jy sigma=0.794262 ! Inverting map and beam ! Estimated beam: bmin=1.613 mas, bmaj=2.27 mas, bpa=87.77 degrees ! Estimated noise=0.189042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243044 Jy ! Component: 100 - total flux cleaned = 0.000526573 Jy ! Component: 150 - total flux cleaned = 0.000695799 Jy ! Component: 200 - total flux cleaned = 0.000775178 Jy ! Total flux subtracted in 200 components = 0.000775178 Jy ! Clean residual min=-0.002317 max=0.001952 Jy/beam ! Clean residual mean=0.000005 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 1.32435 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 1.32435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025175Jy sigma=0.769051 ! Fit after self-cal, rms=0.025152Jy sigma=0.768525 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125808 Jy ! Component: 100 - total flux cleaned = 5.70577e-05 Jy ! Component: 150 - total flux cleaned = 5.7639e-05 Jy ! Component: 200 - total flux cleaned = 0.000118425 Jy ! Total flux subtracted in 200 components = 0.000118425 Jy ! Clean residual min=-0.002290 max=0.001840 Jy/beam ! Clean residual mean=0.000005 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 1.32447 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 142 components and 1.32447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024809Jy sigma=0.755872 ! Fit after self-cal, rms=0.024792Jy sigma=0.755562 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024792Jy sigma=0.755562 ! Fit after self-cal, rms=0.024546Jy sigma=0.747624 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.226 mas, bmaj=1.682 mas, bpa=82.69 degrees ! Estimated noise=0.314582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.780802 Jy ! Component: 100 - total flux cleaned = 1.03197 Jy ! Component: 150 - total flux cleaned = 1.16235 Jy ! Component: 200 - total flux cleaned = 1.23203 Jy ! Total flux subtracted in 200 components = 1.23203 Jy ! Clean residual min=-0.011068 max=0.033307 Jy/beam ! Clean residual mean=0.000032 rms=0.002008 Jy/beam ! Combined flux in latest and established models = 1.23203 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.23203 Jy ! Inverting map and beam ! Estimated beam: bmin=1.611 mas, bmaj=2.268 mas, bpa=87.7 degrees ! Estimated noise=0.189006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443582 Jy ! Component: 100 - total flux cleaned = 0.0630176 Jy ! Component: 150 - total flux cleaned = 0.0722918 Jy ! Component: 200 - total flux cleaned = 0.0788045 Jy ! Total flux subtracted in 200 components = 0.0788045 Jy ! Clean residual min=-0.002564 max=0.003775 Jy/beam ! Clean residual mean=0.000017 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 1.31083 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 1.31083 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049743 Jy ! Component: 100 - total flux cleaned = 0.00770858 Jy ! Component: 150 - total flux cleaned = 0.00882604 Jy ! Component: 200 - total flux cleaned = 0.00958858 Jy ! Total flux subtracted in 200 components = 0.00958858 Jy ! Clean residual min=-0.002216 max=0.002429 Jy/beam ! Clean residual mean=0.000005 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 1.32042 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 1.32042 Jy ! Inverting map ! Added new window around map position (2.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987008 Jy ! Component: 100 - total flux cleaned = 0.0014203 Jy ! Component: 150 - total flux cleaned = 0.001832 Jy ! Component: 200 - total flux cleaned = 0.00232072 Jy ! Total flux subtracted in 200 components = 0.00232072 Jy ! Clean residual min=-0.002091 max=0.001882 Jy/beam ! Clean residual mean=0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 1.32274 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 1.32274 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=3.565 mas, bpa=-84.92 degrees ! Estimated noise=0.205381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000941293 Jy ! Component: 100 - total flux cleaned = 0.00165509 Jy ! Component: 150 - total flux cleaned = 0.00197152 Jy ! Component: 200 - total flux cleaned = 0.00224859 Jy ! Total flux subtracted in 200 components = 0.00224859 Jy ! Clean residual min=-0.001629 max=0.001552 Jy/beam ! Clean residual mean=0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 1.32499 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175439 Jy ! Component: 100 - total flux cleaned = 0.000303256 Jy ! Component: 150 - total flux cleaned = 0.000508958 Jy ! Component: 200 - total flux cleaned = 0.000668332 Jy ! Total flux subtracted in 200 components = 0.000668332 Jy ! Clean residual min=-0.001606 max=0.001554 Jy/beam ! Clean residual mean=0.000002 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 1.32566 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 126 components and 1.32566 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.611 mas, bmaj=2.268 mas, bpa=87.7 degrees ! Estimated noise=0.189006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214484 Jy ! Component: 100 - total flux cleaned = -0.000129652 Jy ! Component: 150 - total flux cleaned = -4.84106e-05 Jy ! Component: 200 - total flux cleaned = 2.85674e-05 Jy ! Total flux subtracted in 200 components = 2.85674e-05 Jy ! Clean residual min=-0.001967 max=0.001691 Jy/beam ! Clean residual mean=0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 1.32569 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 131 components and 1.32569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026314Jy sigma=0.783322 ! Fit after self-cal, rms=0.026056Jy sigma=0.777708 wmodel J0017+8135_X_map.mod ! Writing 131 model components to file: J0017+8135_X_map.mod wobs J0017+8135_X_uvs.fits ! Writing UV FITS file: J0017+8135_X_uvs.fits wwins J0017+8135_X_map.win ! wwins: Wrote 7 windows to J0017+8135_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176708 Jy ! Component: 100 - total flux cleaned = 0.000177035 Jy ! Component: 150 - total flux cleaned = -3.15098e-05 Jy ! Component: 200 - total flux cleaned = -0.000175937 Jy ! Component: 250 - total flux cleaned = -0.000345624 Jy ! Component: 300 - total flux cleaned = -0.000512085 Jy ! Component: 350 - total flux cleaned = -0.000594025 Jy ! Component: 400 - total flux cleaned = -0.000701608 Jy ! Component: 450 - total flux cleaned = -0.00078113 Jy ! Component: 500 - total flux cleaned = -0.000911994 Jy ! Component: 550 - total flux cleaned = -0.00104076 Jy ! Component: 600 - total flux cleaned = -0.00106605 Jy ! Component: 650 - total flux cleaned = -0.00114166 Jy ! Component: 700 - total flux cleaned = -0.00121612 Jy ! Component: 750 - total flux cleaned = -0.00121612 Jy ! Component: 800 - total flux cleaned = -0.00128949 Jy ! Component: 850 - total flux cleaned = -0.00128918 Jy ! Component: 900 - total flux cleaned = -0.00133701 Jy ! Component: 950 - total flux cleaned = -0.00133695 Jy ! Component: 1000 - total flux cleaned = -0.00126632 Jy ! Component: 1050 - total flux cleaned = -0.00136007 Jy ! Component: 1100 - total flux cleaned = -0.00131341 Jy ! Component: 1150 - total flux cleaned = -0.00135953 Jy ! Component: 1200 - total flux cleaned = -0.00131376 Jy ! Component: 1250 - total flux cleaned = -0.00131384 Jy ! Component: 1300 - total flux cleaned = -0.00135878 Jy ! Component: 1350 - total flux cleaned = -0.00131393 Jy ! Component: 1400 - total flux cleaned = -0.00131397 Jy ! Component: 1450 - total flux cleaned = -0.00129206 Jy ! Component: 1500 - total flux cleaned = -0.00131436 Jy ! Component: 1550 - total flux cleaned = -0.00135787 Jy ! Component: 1600 - total flux cleaned = -0.00129287 Jy ! Component: 1650 - total flux cleaned = -0.00125014 Jy ! Component: 1700 - total flux cleaned = -0.00131438 Jy ! Component: 1750 - total flux cleaned = -0.00131434 Jy ! Component: 1800 - total flux cleaned = -0.00129323 Jy ! Component: 1850 - total flux cleaned = -0.0012932 Jy ! Component: 1900 - total flux cleaned = -0.00129316 Jy ! Component: 1950 - total flux cleaned = -0.0013139 Jy ! Component: 2000 - total flux cleaned = -0.00133433 Jy ! Component: 2050 - total flux cleaned = -0.00137515 Jy ! Component: 2100 - total flux cleaned = -0.00143613 Jy ! Component: 2150 - total flux cleaned = -0.00137563 Jy ! Component: 2200 - total flux cleaned = -0.00141561 Jy ! Component: 2250 - total flux cleaned = -0.0013955 Jy ! Component: 2300 - total flux cleaned = -0.00137558 Jy ! Component: 2350 - total flux cleaned = -0.00129654 Jy ! Component: 2400 - total flux cleaned = -0.0012964 Jy ! Component: 2450 - total flux cleaned = -0.00123794 Jy ! Component: 2500 - total flux cleaned = -0.00121875 Jy ! Component: 2550 - total flux cleaned = -0.00119946 Jy ! Component: 2600 - total flux cleaned = -0.00116099 Jy ! Component: 2650 - total flux cleaned = -0.00116113 Jy ! Component: 2700 - total flux cleaned = -0.00118031 Jy ! Component: 2750 - total flux cleaned = -0.00108563 Jy ! Component: 2800 - total flux cleaned = -0.00106684 Jy ! Component: 2850 - total flux cleaned = -0.00106704 Jy ! Component: 2900 - total flux cleaned = -0.000955396 Jy ! Component: 2950 - total flux cleaned = -0.000974079 Jy ! Component: 3000 - total flux cleaned = -0.000937031 Jy ! Component: 3050 - total flux cleaned = -0.000881746 Jy ! Component: 3100 - total flux cleaned = -0.000900046 Jy ! Component: 3150 - total flux cleaned = -0.000918182 Jy ! Component: 3200 - total flux cleaned = -0.000936366 Jy ! Component: 3250 - total flux cleaned = -0.00084613 Jy ! Component: 3300 - total flux cleaned = -0.000828042 Jy ! Component: 3350 - total flux cleaned = -0.00075645 Jy ! Component: 3400 - total flux cleaned = -0.000738432 Jy ! Component: 3450 - total flux cleaned = -0.00072056 Jy ! Component: 3500 - total flux cleaned = -0.00068528 Jy ! Component: 3550 - total flux cleaned = -0.000597586 Jy ! Component: 3600 - total flux cleaned = -0.000597711 Jy ! Component: 3650 - total flux cleaned = -0.000632661 Jy ! Component: 3700 - total flux cleaned = -0.000615498 Jy ! Component: 3750 - total flux cleaned = -0.000615524 Jy ! Component: 3800 - total flux cleaned = -0.000563858 Jy ! Component: 3850 - total flux cleaned = -0.000581155 Jy ! Component: 3900 - total flux cleaned = -0.000513057 Jy ! Component: 3950 - total flux cleaned = -0.000513004 Jy ! Component: 4000 - total flux cleaned = -0.000428384 Jy ! Component: 4050 - total flux cleaned = -0.000445394 Jy ! Total flux subtracted in 4096 components = -0.000411834 Jy ! Clean residual min=-0.000872 max=0.000846 Jy/beam ! Clean residual mean=0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 1.32527 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 377 components and 1.32527 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0017+8135_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.611 x 2.268 at 87.7 degrees (North through East) ! Clean map min=-0.0023137 max=1.0981 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0017+8135_X_b_map.fits wmodel /vlbi/sb072/temp_maps//J0017+8135_X_b_map.mod ! Writing 377 model components to file: /vlbi/sb072/temp_maps//J0017+8135_X_b_map.mod wobs /vlbi/sb072/temp_maps//J0017+8135_X_b_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0017+8135_X_b_uvs.fits wwins /vlbi/sb072/temp_maps//J0017+8135_X_b_map.win ! wwins: Wrote 8 windows to /vlbi/sb072/temp_maps//J0017+8135_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.09814 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274323 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0749418 0.0749418 0.149884 0.299767 0.599534 1.19907 2.39814 4.79627 9.59255 19.1851 38.3702 76.7404 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.098 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4003.11 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0017+8135_X_b_dfm.log closed on Sat Dec 15 22:19:50 2018