! Started logfile: /vlbi/sb072/temp_maps//J0011-2612_X_dfm.log on Fri Jan 25 19:10:52 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/sb072/temp_maps//J0011-2612_X_uva.fits
! Reading UV FITS file: /vlbi/sb072/temp_maps//J0011-2612_X_uva.fits
! AN table 1: 4 integrations on 21 of 21 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0011-2612
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 672 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0011-2612_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.039118Jy  sigma=19.547354
! Fit after  self-cal, rms=0.786105Jy  sigma=14.640455
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.919 mas, bmaj=17.41 mas, bpa=-22.14 degrees
! Estimated noise=2.92742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.177095 Jy
! Component: 100  -  total flux cleaned = 0.208011 Jy
! Total flux subtracted in 100 components = 0.208011 Jy
! Clean residual min=-0.016964 max=0.016730 Jy/beam
! Clean residual mean=-0.000077 rms=0.006431 Jy/beam
! Combined flux in latest and established models = 0.208011 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.208011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.124675Jy  sigma=1.437793
! Fit after  self-cal, rms=0.124580Jy  sigma=1.437464
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.18 mas, bmaj=14.77 mas, bpa=-21.81 degrees
! Estimated noise=2.25565 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00265854 Jy
! Component: 100  -  total flux cleaned = -0.00743998 Jy
! Component: 150  -  total flux cleaned = -0.0112688 Jy
! Component: 200  -  total flux cleaned = -0.0163498 Jy
! Total flux subtracted in 200 components = -0.0163498 Jy
! Clean residual min=-0.004888 max=0.004787 Jy/beam
! Clean residual mean=-0.000037 rms=0.001912 Jy/beam
! Combined flux in latest and established models = 0.191661 Jy
! Performing phase self-cal
! Adding 75 model components to the UV plane model.
! The established model now contains 86 components and 0.191661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.120166Jy  sigma=1.337377
! Fit after  self-cal, rms=0.119557Jy  sigma=1.335765
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.18 x 14.77 at -21.81 degrees (North through East)
! Clean map  min=-0.014751  max=0.21091 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.00*    KP        1.00*    LA        1.09     
!   NL        0.99     OV        1.00     PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.00*    KP        1.00*    LA        0.95     
!   NL        0.97     OV        1.02     PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.00*    KP        1.00*    LA        1.00     
!   NL        0.95     OV        1.02     PT        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.00*    KP        1.00*    LA        1.11     
!   NL        0.96     OV        1.05     PT        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        1.00*    KP        1.00*    LA        0.86     
!   NL        1.02     OV        0.93     PT        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.00*    KP        1.00*    LA        1.10     
!   NL        1.01     OV        1.02     PT        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.00*    KP        1.00*    LA        0.79     
!   NL        1.10     OV        1.05     PT        0.81     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.00*    KP        1.00*    LA        1.20     
!   NL        0.95     OV        0.97     PT        1.04     
! 
! 
! Fit before self-cal, rms=0.119557Jy  sigma=1.335765
! Fit after  self-cal, rms=0.109468Jy  sigma=1.293018
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=14.9 mas, bpa=-21.83 degrees
! Estimated noise=2.21809 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201241 Jy
! Component: 100  -  total flux cleaned = -0.000260247 Jy
! Component: 150  -  total flux cleaned = -0.000784724 Jy
! Component: 200  -  total flux cleaned = -0.00138202 Jy
! Total flux subtracted in 200 components = -0.00138202 Jy
! Clean residual min=-0.001895 max=0.001883 Jy/beam
! Clean residual mean=-0.000004 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.190279 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 165 components and 0.190279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.109071Jy  sigma=1.282642
! Fit after  self-cal, rms=0.108763Jy  sigma=1.281604
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.108763Jy  sigma=1.281604
! Fit after  self-cal, rms=0.108022Jy  sigma=1.280665
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.19 mas, bmaj=14.91 mas, bpa=-21.82 degrees
! Estimated noise=2.22009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353196 Jy
! Component: 100  -  total flux cleaned = -0.000681974 Jy
! Component: 150  -  total flux cleaned = -0.00132792 Jy
! Component: 200  -  total flux cleaned = -0.00184097 Jy
! Total flux subtracted in 200 components = -0.00184097 Jy
! Clean residual min=-0.001358 max=0.001360 Jy/beam
! Clean residual mean=-0.000002 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.188438 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 229 components and 0.188438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107839Jy  sigma=1.276489
! Fit after  self-cal, rms=0.107666Jy  sigma=1.276255
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353343 Jy
! Component: 100  -  total flux cleaned = -0.000723017 Jy
! Component: 150  -  total flux cleaned = -0.00127699 Jy
! Component: 200  -  total flux cleaned = -0.00153994 Jy
! Total flux subtracted in 200 components = -0.00153994 Jy
! Clean residual min=-0.001076 max=0.001071 Jy/beam
! Clean residual mean=0.000003 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.186898 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 279 components and 0.186898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107585Jy  sigma=1.274175
! Fit after  self-cal, rms=0.107515Jy  sigma=1.274036
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107515Jy  sigma=1.274036
! Fit after  self-cal, rms=0.106644Jy  sigma=1.273224
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.196 mas, bmaj=14.93 mas, bpa=-21.82 degrees
! Estimated noise=2.22403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00041206 Jy
! Component: 100  -  total flux cleaned = 0.00033946 Jy
! Component: 150  -  total flux cleaned = 0.000154877 Jy
! Component: 200  -  total flux cleaned = -7.70657e-05 Jy
! Total flux subtracted in 200 components = -7.70657e-05 Jy
! Clean residual min=-0.000936 max=0.000934 Jy/beam
! Clean residual mean=0.000006 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.186821 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 344 components and 0.186821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.106550Jy  sigma=1.271416
! Fit after  self-cal, rms=0.106459Jy  sigma=1.271340
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153974 Jy
! Component: 100  -  total flux cleaned = -0.000257662 Jy
! Component: 150  -  total flux cleaned = -0.000207866 Jy
! Component: 200  -  total flux cleaned = -0.000254827 Jy
! Total flux subtracted in 200 components = -0.000254827 Jy
! Clean residual min=-0.000799 max=0.000799 Jy/beam
! Clean residual mean=0.000007 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.186567 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 415 components and 0.186567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.106410Jy  sigma=1.270323
! Fit after  self-cal, rms=0.106390Jy  sigma=1.270286
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.106390Jy  sigma=1.270286
! Fit after  self-cal, rms=0.105615Jy  sigma=1.269737
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.518 mas, bmaj=14.35 mas, bpa=-21.54 degrees
! Estimated noise=2.37776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119671 Jy
! Component: 100  -  total flux cleaned = 0.00150522 Jy
! Component: 150  -  total flux cleaned = 0.00145559 Jy
! Component: 200  -  total flux cleaned = 0.00129945 Jy
! Total flux subtracted in 200 components = 0.00129945 Jy
! Clean residual min=-0.000838 max=0.000841 Jy/beam
! Clean residual mean=0.000009 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.187866 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 470 components and 0.187866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.105533Jy  sigma=1.268569
! Fit after  self-cal, rms=0.105487Jy  sigma=1.268536
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.99213e-05 Jy
! Component: 100  -  total flux cleaned = 0.000383479 Jy
! Component: 150  -  total flux cleaned = 0.000566439 Jy
! Component: 200  -  total flux cleaned = 0.000791665 Jy
! Total flux subtracted in 200 components = 0.000791665 Jy
! Clean residual min=-0.000747 max=0.000740 Jy/beam
! Clean residual mean=0.000007 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.188658 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 531 components and 0.188658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.105444Jy  sigma=1.267814
! Fit after  self-cal, rms=0.105433Jy  sigma=1.267791
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.201 mas, bmaj=14.95 mas, bpa=-21.82 degrees
! Estimated noise=2.22641 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.201 x 14.95 at -21.82 degrees (North through East)
! Clean map  min=-0.0097255  max=0.20681 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.937 mas, bmaj=17.6 mas, bpa=-22.16 degrees
! Estimated noise=2.89909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1754 Jy
! Component: 100  -  total flux cleaned = 0.215847 Jy
! Component: 150  -  total flux cleaned = 0.209717 Jy
! Component: 200  -  total flux cleaned = 0.203963 Jy
! Total flux subtracted in 200 components = 0.203963 Jy
! Clean residual min=-0.006898 max=0.006796 Jy/beam
! Clean residual mean=-0.000053 rms=0.002747 Jy/beam
! Combined flux in latest and established models = 0.203963 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.203963 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.201 mas, bmaj=14.95 mas, bpa=-21.82 degrees
! Estimated noise=2.22641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00474089 Jy
! Component: 100  -  total flux cleaned = -0.00849492 Jy
! Component: 150  -  total flux cleaned = -0.0115955 Jy
! Component: 200  -  total flux cleaned = -0.0148365 Jy
! Total flux subtracted in 200 components = -0.0148365 Jy
! Clean residual min=-0.003160 max=0.003140 Jy/beam
! Clean residual mean=-0.000021 rms=0.001262 Jy/beam
! Combined flux in latest and established models = 0.189127 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 115 components and 0.189127 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.518 mas, bmaj=14.35 mas, bpa=-21.54 degrees
! Estimated noise=2.37776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00190499 Jy
! Component: 100  -  total flux cleaned = -0.00327942 Jy
! Component: 150  -  total flux cleaned = -0.00483409 Jy
! Component: 200  -  total flux cleaned = -0.0060242 Jy
! Total flux subtracted in 200 components = -0.0060242 Jy
! Clean residual min=-0.001726 max=0.001730 Jy/beam
! Clean residual mean=-0.000018 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.183102 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000609359 Jy
! Component: 100  -  total flux cleaned = -0.000994853 Jy
! Component: 150  -  total flux cleaned = -0.00108417 Jy
! Component: 200  -  total flux cleaned = -0.000909567 Jy
! Total flux subtracted in 200 components = -0.000909567 Jy
! Clean residual min=-0.001441 max=0.001454 Jy/beam
! Clean residual mean=-0.000011 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.182193 Jy
! Adding 121 model components to the UV plane model.
! The established model now contains 233 components and 0.182193 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.201 mas, bmaj=14.95 mas, bpa=-21.82 degrees
! Estimated noise=2.22641 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000482581 Jy
! Component: 100  -  total flux cleaned = -0.000999019 Jy
! Component: 150  -  total flux cleaned = -0.00140293 Jy
! Component: 200  -  total flux cleaned = -0.00164966 Jy
! Total flux subtracted in 200 components = -0.00164966 Jy
! Clean residual min=-0.000987 max=0.000984 Jy/beam
! Clean residual mean=0.000001 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.180543 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 292 components and 0.180543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.105471Jy  sigma=1.270342
! Fit after  self-cal, rms=0.105480Jy  sigma=1.270207
wmodel J0011-2612_X_map.mod
! Writing 292 model components to file: J0011-2612_X_map.mod
wobs   J0011-2612_X_uvs.fits
! Writing UV FITS file: J0011-2612_X_uvs.fits
wwins  J0011-2612_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/sb072/temp_maps//J0011-2612_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.201 x 14.95 at -21.82 degrees (North through East)
! Clean map  min=-0.0077454  max=0.20469 Jy/beam
! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0011-2612_X_map.fits
wmodel /vlbi/sb072/temp_maps//J0011-2612_X_map.mod
! Writing 292 model components to file: /vlbi/sb072/temp_maps//J0011-2612_X_map.mod
wobs   /vlbi/sb072/temp_maps//J0011-2612_X_uvs.fits
! Writing UV FITS file: /vlbi/sb072/temp_maps//J0011-2612_X_uvs.fits
wwins  /vlbi/sb072/temp_maps//J0011-2612_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.204691 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000398685 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.584322 0.584322 1.16864 2.33729 4.67457 9.34915 18.6983 37.3966 74.7932
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.204 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  513.415 
quit
! Quitting program
! Log file /vlbi/sb072/temp_maps//J0011-2612_X_dfm.log closed on Fri Jan 25 19:10:55 2019