! Started logfile: /vlbi/sb072/temp_maps//J0010-0433_X_dfm.log on Mon Nov 12 22:46:12 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/sb072/temp_maps//J0010-0433_X_uvm.fits ! Reading UV FITS file: /vlbi/sb072/temp_maps//J0010-0433_X_uvm.fits ! AN table 1: 3 integrations on 3 of 3 possible baselines. ! AN table 2: 4 integrations on 3 of 3 possible baselines. ! AN table 3: 7 integrations on 3 of 3 possible baselines. ! AN table 4: 4 integrations on 15 of 15 possible baselines. ! AN table 5: 10 integrations on 21 of 21 possible baselines. ! AN table 6: 4 integrations on 10 of 10 possible baselines. ! AN table 7: 4 integrations on 28 of 28 possible baselines. ! AN table 8: 4 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.748016 visibilities/baseline/integration-bin. ! Found source: J0010-0433 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 3016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0010-0433_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.028669Jy sigma=40.369848 ! Fit after self-cal, rms=0.784597Jy sigma=30.850149 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.099 mas, bmaj=2.637 mas, bpa=-10.92 degrees ! Estimated noise=0.533127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166066 Jy ! Component: 100 - total flux cleaned = 0.205195 Jy ! Total flux subtracted in 100 components = 0.205195 Jy ! Clean residual min=-0.009025 max=0.014023 Jy/beam ! Clean residual mean=-0.000007 rms=0.002040 Jy/beam ! Combined flux in latest and established models = 0.205195 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.205195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036573Jy sigma=1.266932 ! Fit after self-cal, rms=0.036566Jy sigma=1.266690 ! Inverting map ! Added new window around map position (2.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140089 Jy ! Component: 100 - total flux cleaned = 0.0141813 Jy ! Total flux subtracted in 100 components = 0.0141813 Jy ! Clean residual min=-0.007429 max=0.009417 Jy/beam ! Clean residual mean=0.000003 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.219377 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.219377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031308Jy sigma=1.070233 ! Fit after self-cal, rms=0.031158Jy sigma=1.063985 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.458 mas, bmaj=3.323 mas, bpa=-11.2 degrees ! Estimated noise=0.342897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702553 Jy ! Component: 100 - total flux cleaned = 0.000354181 Jy ! Component: 150 - total flux cleaned = 0.000208702 Jy ! Component: 200 - total flux cleaned = -0.000149873 Jy ! Total flux subtracted in 200 components = -0.000149873 Jy ! Clean residual min=-0.005952 max=0.005685 Jy/beam ! Clean residual mean=0.000007 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.219227 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.219227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029401Jy sigma=0.995650 ! Fit after self-cal, rms=0.029374Jy sigma=0.994306 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.458 x 3.323 at -11.2 degrees (North through East) ! Clean map min=-0.0063446 max=0.21341 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.11 FD 1.06 LA 1.09 NL 1.02 ! OV 1.05 PT 1.08 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 1.02 HN 0.90 LA 0.95 ! NL 1.05 OV 0.95 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 1.08 LA 0.97 NL 1.02 ! OV 1.03 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.93 FD 1.02 HN 0.95 KP 0.98 ! LA 1.02 NL 1.06 OV 0.97 PT 0.93 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.91 HN 0.95 MK 1.01 NL 1.07 ! OV 0.98 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 1.05 LA 1.04 NL 1.03 ! OV 1.09 PT 1.08 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 1.05 HN 0.92 LA 0.94 ! NL 1.06 OV 0.92 PT 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 1.06 LA 1.00 NL 1.00 ! OV 1.04 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 1.03 HN 0.96 KP 0.98 ! LA 0.97 NL 1.02 OV 0.96 PT 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.94 HN 1.00 MK 0.96 NL 1.02 ! OV 1.01 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.07 LA 1.08 NL 1.02 ! OV 1.05 PT 1.04 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 1.04 HN 0.90 LA 0.97 ! NL 1.05 OV 0.99 PT 0.95 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 1.08 LA 0.98 NL 1.02 ! OV 1.03 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.95 FD 1.02 HN 0.93 KP 1.01 ! LA 1.00 NL 1.03 OV 0.98 PT 0.95 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.91 HN 0.97 MK 1.00 NL 1.00 ! OV 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.11 LA 1.05 NL 1.04 ! OV 1.10 PT 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 1.03 HN 0.92 LA 0.98 ! NL 1.04 OV 0.95 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 1.09 LA 0.98 NL 1.01 ! OV 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.92 FD 1.01 HN 0.95 KP 0.98 ! LA 0.99 NL 1.02 OV 0.97 PT 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.90 HN 0.99 MK 0.98 NL 1.00 ! OV 1.00 ! ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.09 LA 1.08 NL 1.03 ! OV 1.08 PT 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.03 HN 0.94 LA 0.98 ! NL 1.03 OV 0.95 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 1.06 LA 1.01 NL 1.06 ! OV 1.04 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.94 FD 1.05 HN 0.94 KP 0.95 ! LA 0.97 NL 1.03 OV 0.98 PT 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.92 HN 0.96 MK 1.03 NL 1.01 ! OV 0.98 ! ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.11 FD 1.09 LA 1.08 NL 1.04 ! OV 1.08 PT 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 1.01 HN 0.92 LA 0.96 ! NL 1.05 OV 0.97 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 1.05 LA 0.98 NL 1.01 ! OV 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.93 FD 1.04 HN 0.95 KP 0.99 ! LA 1.00 NL 1.04 OV 0.99 PT 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.92 HN 0.97 MK 0.95 NL 1.04 ! OV 0.99 ! ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 1.08 LA 1.05 NL 1.06 ! OV 1.04 PT 1.04 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 1.02 HN 0.96 LA 0.97 ! NL 1.04 OV 0.96 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 1.06 LA 1.02 NL 1.03 ! OV 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.90 FD 1.02 HN 0.95 KP 0.96 ! LA 1.00 NL 1.04 OV 0.95 PT 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.88 HN 0.94 MK 0.98 NL 1.04 ! OV 0.96 ! ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* OV 0.00* PT 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.07 LA 1.07 NL 1.00 ! OV 1.10 PT 1.09 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 1.03 HN 0.96 LA 0.97 ! NL 1.06 OV 0.95 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 1.06 LA 0.95 NL 1.01 ! OV 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.90 FD 1.03 HN 0.94 KP 0.96 ! LA 1.00 NL 1.02 OV 0.98 PT 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.89 HN 0.96 MK 0.98 NL 1.01 ! OV 0.96 ! ! ! Fit before self-cal, rms=0.029374Jy sigma=0.994306 ! Fit after self-cal, rms=0.022926Jy sigma=0.715129 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.494 mas, bmaj=4.476 mas, bpa=-16.6 degrees ! Estimated noise=0.362787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282747 Jy ! Component: 100 - total flux cleaned = -4.03845e-06 Jy ! Component: 150 - total flux cleaned = 0.000266811 Jy ! Component: 200 - total flux cleaned = 0.000474982 Jy ! Total flux subtracted in 200 components = 0.000474982 Jy ! Clean residual min=-0.003172 max=0.002767 Jy/beam ! Clean residual mean=0.000004 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.219702 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.219702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022592Jy sigma=0.698159 ! Fit after self-cal, rms=0.022586Jy sigma=0.697701 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022586Jy sigma=0.697701 ! Fit after self-cal, rms=0.022504Jy sigma=0.693208 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.49 mas, bmaj=4.472 mas, bpa=-16.54 degrees ! Estimated noise=0.36344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317579 Jy ! Component: 100 - total flux cleaned = 0.000618315 Jy ! Component: 150 - total flux cleaned = 0.000774034 Jy ! Component: 200 - total flux cleaned = 0.000774615 Jy ! Total flux subtracted in 200 components = 0.000774615 Jy ! Clean residual min=-0.002711 max=0.002397 Jy/beam ! Clean residual mean=0.000004 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.220476 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.220476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022327Jy sigma=0.684030 ! Fit after self-cal, rms=0.022326Jy sigma=0.683833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010361 Jy ! Component: 100 - total flux cleaned = -0.000102573 Jy ! Component: 150 - total flux cleaned = -8.03927e-05 Jy ! Component: 200 - total flux cleaned = -8.07597e-05 Jy ! Total flux subtracted in 200 components = -8.07597e-05 Jy ! Clean residual min=-0.002688 max=0.002283 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.220395 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.220395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022277Jy sigma=0.681873 ! Fit after self-cal, rms=0.022277Jy sigma=0.681841 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022277Jy sigma=0.681841 ! Fit after self-cal, rms=0.022042Jy sigma=0.670936 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.486 mas, bmaj=4.468 mas, bpa=-16.47 degrees ! Estimated noise=0.363596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341157 Jy ! Component: 100 - total flux cleaned = 0.000745633 Jy ! Component: 150 - total flux cleaned = 0.000862362 Jy ! Component: 200 - total flux cleaned = 0.000885598 Jy ! Total flux subtracted in 200 components = 0.000885598 Jy ! Clean residual min=-0.002160 max=0.001936 Jy/beam ! Clean residual mean=0.000003 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.221281 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.221281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021941Jy sigma=0.665709 ! Fit after self-cal, rms=0.021940Jy sigma=0.665585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.12164e-05 Jy ! Component: 100 - total flux cleaned = -5.26076e-05 Jy ! Component: 150 - total flux cleaned = -5.29241e-05 Jy ! Component: 200 - total flux cleaned = -5.29012e-05 Jy ! Total flux subtracted in 200 components = -5.29012e-05 Jy ! Clean residual min=-0.002147 max=0.001841 Jy/beam ! Clean residual mean=0.000003 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.221228 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.221228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021907Jy sigma=0.664383 ! Fit after self-cal, rms=0.021906Jy sigma=0.664343 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021906Jy sigma=0.664343 ! Fit after self-cal, rms=0.021853Jy sigma=0.661744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=4.74 mas, bpa=-17.16 degrees ! Estimated noise=0.396405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000452043 Jy ! Component: 100 - total flux cleaned = 0.000616376 Jy ! Component: 150 - total flux cleaned = 0.000660179 Jy ! Component: 200 - total flux cleaned = 0.000686667 Jy ! Total flux subtracted in 200 components = 0.000686667 Jy ! Clean residual min=-0.001658 max=0.001488 Jy/beam ! Clean residual mean=0.000004 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.221915 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.221915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021808Jy sigma=0.659787 ! Fit after self-cal, rms=0.021804Jy sigma=0.659587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13755e-05 Jy ! Component: 100 - total flux cleaned = 5.02863e-06 Jy ! Component: 150 - total flux cleaned = 1.5682e-05 Jy ! Component: 200 - total flux cleaned = 2.59697e-05 Jy ! Total flux subtracted in 200 components = 2.59697e-05 Jy ! Clean residual min=-0.001617 max=0.001452 Jy/beam ! Clean residual mean=0.000004 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.221941 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.221941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021784Jy sigma=0.659058 ! Fit after self-cal, rms=0.021782Jy sigma=0.658957 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.483 mas, bmaj=4.465 mas, bpa=-16.39 degrees ! Estimated noise=0.363523 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.483 x 4.465 at -16.39 degrees (North through East) ! Clean map min=-0.0019716 max=0.21469 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=4.201 mas, bpa=-19.11 degrees ! Estimated noise=0.55747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167503 Jy ! Component: 100 - total flux cleaned = 0.204126 Jy ! Component: 150 - total flux cleaned = 0.213895 Jy ! Component: 200 - total flux cleaned = 0.218374 Jy ! Total flux subtracted in 200 components = 0.218374 Jy ! Clean residual min=-0.002616 max=0.002640 Jy/beam ! Clean residual mean=-0.000001 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.218374 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.218374 Jy ! Inverting map and beam ! Estimated beam: bmin=1.483 mas, bmaj=4.465 mas, bpa=-16.39 degrees ! Estimated noise=0.363523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196513 Jy ! Component: 100 - total flux cleaned = 0.00258888 Jy ! Component: 150 - total flux cleaned = 0.00304408 Jy ! Component: 200 - total flux cleaned = 0.00323747 Jy ! Total flux subtracted in 200 components = 0.00323747 Jy ! Clean residual min=-0.001670 max=0.001763 Jy/beam ! Clean residual mean=0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.221611 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 51 components and 0.221611 Jy ! Inverting map ! Added new window around map position (0.2, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417683 Jy ! Component: 100 - total flux cleaned = 0.00014491 Jy ! Component: 150 - total flux cleaned = 6.6807e-05 Jy ! Component: 200 - total flux cleaned = 6.50199e-05 Jy ! Total flux subtracted in 200 components = 6.50199e-05 Jy ! Clean residual min=-0.001370 max=0.001469 Jy/beam ! Clean residual mean=0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.221676 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.221676 Jy ! Inverting map ! Added new window around map position (-4, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000477328 Jy ! Component: 100 - total flux cleaned = 0.000624831 Jy ! Component: 150 - total flux cleaned = 0.000624435 Jy ! Component: 200 - total flux cleaned = 0.000676475 Jy ! Total flux subtracted in 200 components = 0.000676475 Jy ! Clean residual min=-0.001132 max=0.001042 Jy/beam ! Clean residual mean=0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.222353 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.222353 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=4.74 mas, bpa=-17.16 degrees ! Estimated noise=0.396405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222783 Jy ! Component: 100 - total flux cleaned = -0.000340559 Jy ! Component: 150 - total flux cleaned = -0.000402053 Jy ! Component: 200 - total flux cleaned = -0.000430214 Jy ! Total flux subtracted in 200 components = -0.000430214 Jy ! Clean residual min=-0.000856 max=0.000889 Jy/beam ! Clean residual mean=-0.000000 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.221922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.29012e-05 Jy ! Component: 100 - total flux cleaned = -2.50024e-05 Jy ! Component: 150 - total flux cleaned = -2.55179e-05 Jy ! Component: 200 - total flux cleaned = -6.89963e-05 Jy ! Total flux subtracted in 200 components = -6.89963e-05 Jy ! Clean residual min=-0.000806 max=0.000872 Jy/beam ! Clean residual mean=-0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.221853 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 133 components and 0.221853 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.483 mas, bmaj=4.465 mas, bpa=-16.39 degrees ! Estimated noise=0.363523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171275 Jy ! Component: 100 - total flux cleaned = -0.000138324 Jy ! Component: 150 - total flux cleaned = -0.000138202 Jy ! Component: 200 - total flux cleaned = -0.000152248 Jy ! Total flux subtracted in 200 components = -0.000152248 Jy ! Clean residual min=-0.000967 max=0.000864 Jy/beam ! Clean residual mean=-0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.221701 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 157 components and 0.221701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021517Jy sigma=0.647342 ! Fit after self-cal, rms=0.021498Jy sigma=0.646343 wmodel J0010-0433_X_map.mod ! Writing 157 model components to file: J0010-0433_X_map.mod wobs J0010-0433_X_uvs.fits ! Writing UV FITS file: J0010-0433_X_uvs.fits wwins J0010-0433_X_map.win ! wwins: Wrote 4 windows to J0010-0433_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.80261e-05 Jy ! Component: 100 - total flux cleaned = 0.000244245 Jy ! Component: 150 - total flux cleaned = 0.000325111 Jy ! Component: 200 - total flux cleaned = 0.000388408 Jy ! Component: 250 - total flux cleaned = 0.000388434 Jy ! Component: 300 - total flux cleaned = 0.000365473 Jy ! Component: 350 - total flux cleaned = 0.000343288 Jy ! Component: 400 - total flux cleaned = 0.000278097 Jy ! Component: 450 - total flux cleaned = 0.000204192 Jy ! Component: 500 - total flux cleaned = 0.000142556 Jy ! Component: 550 - total flux cleaned = 0.000112556 Jy ! Component: 600 - total flux cleaned = 3.44698e-05 Jy ! Component: 650 - total flux cleaned = -1.28531e-05 Jy ! Component: 700 - total flux cleaned = -5.91604e-05 Jy ! Component: 750 - total flux cleaned = -0.000113449 Jy ! Component: 800 - total flux cleaned = -0.00019325 Jy ! Component: 850 - total flux cleaned = -0.000271432 Jy ! Component: 900 - total flux cleaned = -0.000347986 Jy ! Component: 950 - total flux cleaned = -0.000406598 Jy ! Component: 1000 - total flux cleaned = -0.000488459 Jy ! Component: 1050 - total flux cleaned = -0.000536836 Jy ! Component: 1100 - total flux cleaned = -0.000576204 Jy ! Component: 1150 - total flux cleaned = -0.000607309 Jy ! Component: 1200 - total flux cleaned = -0.000630267 Jy ! Component: 1250 - total flux cleaned = -0.000683122 Jy ! Component: 1300 - total flux cleaned = -0.000705457 Jy ! Component: 1350 - total flux cleaned = -0.000749298 Jy ! Component: 1400 - total flux cleaned = -0.000785223 Jy ! Component: 1450 - total flux cleaned = -0.000813446 Jy ! Component: 1500 - total flux cleaned = -0.000841286 Jy ! Component: 1550 - total flux cleaned = -0.000882492 Jy ! Component: 1600 - total flux cleaned = -0.000902896 Jy ! Component: 1650 - total flux cleaned = -0.000936429 Jy ! Component: 1700 - total flux cleaned = -0.000956273 Jy ! Component: 1750 - total flux cleaned = -0.00096277 Jy ! Component: 1800 - total flux cleaned = -0.000982172 Jy ! Component: 1850 - total flux cleaned = -0.00100137 Jy ! Component: 1900 - total flux cleaned = -0.00101394 Jy ! Component: 1950 - total flux cleaned = -0.00105129 Jy ! Component: 2000 - total flux cleaned = -0.00105741 Jy ! Component: 2050 - total flux cleaned = -0.00104535 Jy ! Component: 2100 - total flux cleaned = -0.00106947 Jy ! Component: 2150 - total flux cleaned = -0.00106953 Jy ! Component: 2200 - total flux cleaned = -0.00108128 Jy ! Component: 2250 - total flux cleaned = -0.00105203 Jy ! Component: 2300 - total flux cleaned = -0.00104635 Jy ! Component: 2350 - total flux cleaned = -0.00105208 Jy ! Component: 2400 - total flux cleaned = -0.0010634 Jy ! Component: 2450 - total flux cleaned = -0.00106347 Jy ! Component: 2500 - total flux cleaned = -0.00105795 Jy ! Component: 2550 - total flux cleaned = -0.00106899 Jy ! Component: 2600 - total flux cleaned = -0.00106912 Jy ! Component: 2650 - total flux cleaned = -0.00107993 Jy ! Component: 2700 - total flux cleaned = -0.0010906 Jy ! Component: 2750 - total flux cleaned = -0.00111191 Jy ! Component: 2800 - total flux cleaned = -0.0011119 Jy ! Component: 2850 - total flux cleaned = -0.00112235 Jy ! Component: 2900 - total flux cleaned = -0.00113272 Jy ! Component: 2950 - total flux cleaned = -0.00114296 Jy ! Component: 3000 - total flux cleaned = -0.00115318 Jy ! Component: 3050 - total flux cleaned = -0.00116331 Jy ! Component: 3100 - total flux cleaned = -0.00117333 Jy ! Component: 3150 - total flux cleaned = -0.00117825 Jy ! Component: 3200 - total flux cleaned = -0.00118315 Jy ! Component: 3250 - total flux cleaned = -0.00117336 Jy ! Component: 3300 - total flux cleaned = -0.00117331 Jy ! Component: 3350 - total flux cleaned = -0.00116851 Jy ! Component: 3400 - total flux cleaned = -0.00118288 Jy ! Component: 3450 - total flux cleaned = -0.00120191 Jy ! Component: 3500 - total flux cleaned = -0.00118773 Jy ! Component: 3550 - total flux cleaned = -0.00118303 Jy ! Component: 3600 - total flux cleaned = -0.00120172 Jy ! Component: 3650 - total flux cleaned = -0.00121094 Jy ! Component: 3700 - total flux cleaned = -0.00120631 Jy ! Component: 3750 - total flux cleaned = -0.00120173 Jy ! Component: 3800 - total flux cleaned = -0.00120176 Jy ! Component: 3850 - total flux cleaned = -0.00120628 Jy ! Component: 3900 - total flux cleaned = -0.00119732 Jy ! Component: 3950 - total flux cleaned = -0.00120623 Jy ! Component: 4000 - total flux cleaned = -0.00121069 Jy ! Component: 4050 - total flux cleaned = -0.00120189 Jy ! Total flux subtracted in 4096 components = -0.00121936 Jy ! Clean residual min=-0.000293 max=0.000226 Jy/beam ! Clean residual mean=0.000000 rms=0.000083 Jy/beam ! Combined flux in latest and established models = 0.220482 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 419 components and 0.220482 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/sb072/temp_maps//J0010-0433_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.483 x 4.465 at -16.39 degrees (North through East) ! Clean map min=-0.0013689 max=0.21577 Jy/beam ! Writing clean map to FITS file: /vlbi/sb072/temp_maps//J0010-0433_X_map.fits wmodel /vlbi/sb072/temp_maps//J0010-0433_X_map.mod ! Writing 419 model components to file: /vlbi/sb072/temp_maps//J0010-0433_X_map.mod wobs /vlbi/sb072/temp_maps//J0010-0433_X_uvs.fits ! Writing UV FITS file: /vlbi/sb072/temp_maps//J0010-0433_X_uvs.fits wwins /vlbi/sb072/temp_maps//J0010-0433_X_map.win ! wwins: Wrote 5 windows to /vlbi/sb072/temp_maps//J0010-0433_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.215771 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.16631e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.113541 0.113541 0.227083 0.454165 0.908331 1.81666 3.63332 7.26665 14.5333 29.0666 58.1332 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.215 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2642.21 quit ! Quitting program ! Log file /vlbi/sb072/temp_maps//J0010-0433_X_dfm.log closed on Mon Nov 12 22:46:16 2018