! Started logfile: .//J2253+1608_X_dfm.log on Wed Nov 16 12:12:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J2253+1608_X_uva.fits
! Reading UV FITS file: .//J2253+1608_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.976608 visibilities/baseline/integration-bin.
! Found source: J2253+1608
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 20040 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2253+1608_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=14.382620Jy  sigma=417.971197
! Fit after  self-cal, rms=13.307048Jy  sigma=386.939171
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7613 mas, bmaj=2.016 mas, bpa=12.15 degrees
! Estimated noise=0.356796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 10.4475 Jy
! Component: 100  -  total flux cleaned = 12.9517 Jy
! Total flux subtracted in 100 components = 12.9517 Jy
! Clean residual min=-0.643541 max=1.049816 Jy/beam
! Clean residual mean=-0.000906 rms=0.120872 Jy/beam
! Combined flux in latest and established models = 12.9517 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 12.9517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=3.376724Jy  sigma=80.788639
! Fit after  self-cal, rms=3.351224Jy  sigma=80.762277
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.17089 Jy
! Component: 100  -  total flux cleaned = 1.82729 Jy
! Total flux subtracted in 100 components = 1.82729 Jy
! Clean residual min=-0.480124 max=0.428526 Jy/beam
! Clean residual mean=-0.000705 rms=0.072297 Jy/beam
! Combined flux in latest and established models = 14.779 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 14.779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.894894Jy  sigma=56.767453
! Fit after  self-cal, rms=2.894582Jy  sigma=56.747468
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=2.291 mas, bpa=8.155 degrees
! Estimated noise=0.182452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.559698 Jy
! Component: 100  -  total flux cleaned = 0.868715 Jy
! Component: 150  -  total flux cleaned = 1.05719 Jy
! Component: 200  -  total flux cleaned = 1.17677 Jy
! Total flux subtracted in 200 components = 1.17677 Jy
! Clean residual min=-0.413649 max=0.425350 Jy/beam
! Clean residual mean=-0.001803 rms=0.090920 Jy/beam
! Combined flux in latest and established models = 15.9558 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 38 components and 15.9558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.852945Jy  sigma=50.824299
! Fit after  self-cal, rms=2.852877Jy  sigma=50.822291
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 2.291 at 8.155 degrees (North through East)
! Clean map  min=-0.39398  max=14.165 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.01     KP        1.06     
!   LA        0.95     MK        1.00     NL        1.06     OV        1.00     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.05     OV        1.00     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.94     HN        0.99     KP        1.05     
!   LA        0.95     MK        1.01     NL        1.05     OV        1.01     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.00     KP        1.04     
!   LA        0.94     MK        0.99     NL        1.05     OV        1.00     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        0.99     KP        1.03     
!   LA        0.95     MK        0.99     NL        1.04     OV        1.00     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        0.99     KP        1.04     
!   LA        0.94     MK        0.99     NL        1.03     OV        0.99     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        0.99     KP        1.05     
!   LA        0.95     MK        0.99     NL        1.04     OV        0.99     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.92     HN        0.98     KP        1.04     
!   LA        0.95     MK        0.99     NL        1.04     OV        0.99     
!   PT        0.93     SC        1.00     
! 
! 
! Fit before self-cal, rms=2.852877Jy  sigma=50.822291
! Fit after  self-cal, rms=2.712109Jy  sigma=44.076545
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.31 mas, bpa=8.144 degrees
! Estimated noise=0.179774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.2, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.335971 Jy
! Component: 100  -  total flux cleaned = 0.4677 Jy
! Component: 150  -  total flux cleaned = 0.544819 Jy
! Component: 200  -  total flux cleaned = 0.583869 Jy
! Total flux subtracted in 200 components = 0.583869 Jy
! Clean residual min=-0.127106 max=0.177351 Jy/beam
! Clean residual mean=-0.000245 rms=0.033711 Jy/beam
! Combined flux in latest and established models = 16.5397 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 74 components and 16.5397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.640205Jy  sigma=41.784959
! Fit after  self-cal, rms=2.639487Jy  sigma=41.749349
! Inverting map 
! Added new window around map position (-3.6, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161745 Jy
! Component: 100  -  total flux cleaned = 0.215441 Jy
! Component: 150  -  total flux cleaned = 0.238847 Jy
! Component: 200  -  total flux cleaned = 0.256352 Jy
! Total flux subtracted in 200 components = 0.256352 Jy
! Clean residual min=-0.099898 max=0.111119 Jy/beam
! Clean residual mean=-0.000123 rms=0.025728 Jy/beam
! Combined flux in latest and established models = 16.796 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 102 components and 16.796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.621345Jy  sigma=41.259156
! Fit after  self-cal, rms=2.620894Jy  sigma=41.232662
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.620894Jy  sigma=41.232662
! Fit after  self-cal, rms=2.621459Jy  sigma=40.825744
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.312 mas, bpa=8.095 degrees
! Estimated noise=0.177613 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.140166 Jy
! Component: 100  -  total flux cleaned = -0.127999 Jy
! Component: 150  -  total flux cleaned = -0.102106 Jy
! Component: 200  -  total flux cleaned = -0.0781955 Jy
! Total flux subtracted in 200 components = -0.0781955 Jy
! Clean residual min=-0.074761 max=0.107987 Jy/beam
! Clean residual mean=-0.000145 rms=0.022000 Jy/beam
! Combined flux in latest and established models = 16.7178 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 121 components and 16.7178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.583061Jy  sigma=40.997579
! Fit after  self-cal, rms=2.582983Jy  sigma=40.990339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.4, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106717 Jy
! Component: 100  -  total flux cleaned = 0.171464 Jy
! Component: 150  -  total flux cleaned = 0.221289 Jy
! Component: 200  -  total flux cleaned = 0.260884 Jy
! Total flux subtracted in 200 components = 0.260884 Jy
! Clean residual min=-0.066593 max=0.075503 Jy/beam
! Clean residual mean=-0.000078 rms=0.015449 Jy/beam
! Combined flux in latest and established models = 16.9787 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 156 components and 16.9787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.576577Jy  sigma=40.737625
! Fit after  self-cal, rms=2.576494Jy  sigma=40.732213
! Inverting map 
! Added new window around map position (-1.2, -7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0737188 Jy
! Component: 100  -  total flux cleaned = 0.120245 Jy
! Component: 150  -  total flux cleaned = 0.154258 Jy
! Component: 200  -  total flux cleaned = 0.181875 Jy
! Total flux subtracted in 200 components = 0.181875 Jy
! Clean residual min=-0.056084 max=0.055005 Jy/beam
! Clean residual mean=-0.000040 rms=0.011936 Jy/beam
! Combined flux in latest and established models = 17.1606 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 177 components and 17.1606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.571674Jy  sigma=40.646741
! Fit after  self-cal, rms=2.571637Jy  sigma=40.644762
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.571637Jy  sigma=40.644762
! Fit after  self-cal, rms=2.572587Jy  sigma=40.209791
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=2.313 mas, bpa=8.012 degrees
! Estimated noise=0.175176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.162981 Jy
! Component: 100  -  total flux cleaned = -0.191649 Jy
! Component: 150  -  total flux cleaned = -0.178162 Jy
! Component: 200  -  total flux cleaned = -0.16759 Jy
! Total flux subtracted in 200 components = -0.16759 Jy
! Clean residual min=-0.053747 max=0.051875 Jy/beam
! Clean residual mean=-0.000051 rms=0.011190 Jy/beam
! Combined flux in latest and established models = 16.993 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 194 components and 16.993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.534346Jy  sigma=40.570701
! Fit after  self-cal, rms=2.534336Jy  sigma=40.569745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153418 Jy
! Component: 100  -  total flux cleaned = 0.0222578 Jy
! Component: 150  -  total flux cleaned = 0.026561 Jy
! Component: 200  -  total flux cleaned = 0.0316209 Jy
! Total flux subtracted in 200 components = 0.0316209 Jy
! Clean residual min=-0.049046 max=0.047138 Jy/beam
! Clean residual mean=-0.000045 rms=0.010059 Jy/beam
! Combined flux in latest and established models = 17.0246 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 204 components and 17.0246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.532123Jy  sigma=40.565860
! Fit after  self-cal, rms=2.532112Jy  sigma=40.565246
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.532112Jy  sigma=40.565246
! Fit after  self-cal, rms=2.533341Jy  sigma=40.153025
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.019 mas, bmaj=3.15 mas, bpa=-3.99 degrees
! Estimated noise=0.213086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.189866 Jy
! Component: 100  -  total flux cleaned = -0.21821 Jy
! Component: 150  -  total flux cleaned = -0.216899 Jy
! Component: 200  -  total flux cleaned = -0.215773 Jy
! Total flux subtracted in 200 components = -0.215773 Jy
! Clean residual min=-0.053783 max=0.047437 Jy/beam
! Clean residual mean=-0.000094 rms=0.012785 Jy/beam
! Combined flux in latest and established models = 16.8089 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 220 components and 16.8089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.493091Jy  sigma=40.639868
! Fit after  self-cal, rms=2.493054Jy  sigma=40.637806
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688306 Jy
! Component: 100  -  total flux cleaned = 0.0107971 Jy
! Component: 150  -  total flux cleaned = 0.0107834 Jy
! Component: 200  -  total flux cleaned = 0.010799 Jy
! Total flux subtracted in 200 components = 0.010799 Jy
! Clean residual min=-0.048613 max=0.042989 Jy/beam
! Clean residual mean=-0.000095 rms=0.011520 Jy/beam
! Combined flux in latest and established models = 16.8197 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 231 components and 16.8197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.491590Jy  sigma=40.639892
! Fit after  self-cal, rms=2.491575Jy  sigma=40.639113
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=2.315 mas, bpa=7.918 degrees
! Estimated noise=0.172796 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 2.315 at 7.918 degrees (North through East)
! Clean map  min=-0.047351  max=13.484 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.491575Jy  sigma=40.639113
! Fit after  self-cal, rms=2.445558Jy  sigma=38.041998
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=2.316 mas, bpa=7.78 degrees
! Estimated noise=0.167939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.291265 Jy
! Component: 100  -  total flux cleaned = -0.380057 Jy
! Component: 150  -  total flux cleaned = -0.40369 Jy
! Component: 200  -  total flux cleaned = -0.412604 Jy
! Total flux subtracted in 200 components = -0.412604 Jy
! Clean residual min=-0.068665 max=0.059164 Jy/beam
! Clean residual mean=-0.000018 rms=0.011184 Jy/beam
! Combined flux in latest and established models = 16.4071 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 242 components and 16.4071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.360855Jy  sigma=37.973071
! Fit after  self-cal, rms=2.360842Jy  sigma=37.972240
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00115425 Jy
! Component: 100  -  total flux cleaned = -0.00598727 Jy
! Component: 150  -  total flux cleaned = -0.0092083 Jy
! Component: 200  -  total flux cleaned = -0.0111197 Jy
! Total flux subtracted in 200 components = -0.0111197 Jy
! Clean residual min=-0.061842 max=0.053950 Jy/beam
! Clean residual mean=-0.000027 rms=0.010259 Jy/beam
! Combined flux in latest and established models = 16.3959 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 254 components and 16.3959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.357699Jy  sigma=37.984325
! Fit after  self-cal, rms=2.357685Jy  sigma=37.983477
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.357685Jy  sigma=37.983477
! Fit after  self-cal, rms=2.333550Jy  sigma=36.396954
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.767 mas, bmaj=2.034 mas, bpa=11.6 degrees
! Estimated noise=0.323979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.49164 Jy
! Component: 100  -  total flux cleaned = 11.7585 Jy
! Component: 150  -  total flux cleaned = 12.7825 Jy
! Component: 200  -  total flux cleaned = 13.3473 Jy
! Total flux subtracted in 200 components = 13.3473 Jy
! Clean residual min=-0.272485 max=0.314419 Jy/beam
! Clean residual mean=-0.000378 rms=0.047598 Jy/beam
! Combined flux in latest and established models = 13.3473 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 13.3473 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=2.319 mas, bpa=7.599 degrees
! Estimated noise=0.163932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.454597 Jy
! Component: 100  -  total flux cleaned = 0.772817 Jy
! Component: 150  -  total flux cleaned = 1.02057 Jy
! Component: 200  -  total flux cleaned = 1.21714 Jy
! Total flux subtracted in 200 components = 1.21714 Jy
! Clean residual min=-0.128305 max=0.173631 Jy/beam
! Clean residual mean=-0.000552 rms=0.037768 Jy/beam
! Combined flux in latest and established models = 14.5644 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 34 components and 14.5644 Jy
! Inverting map 
! Added new window around map position (3.4, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181109 Jy
! Component: 100  -  total flux cleaned = 0.324282 Jy
! Component: 150  -  total flux cleaned = 0.44818 Jy
! Component: 200  -  total flux cleaned = 0.557021 Jy
! Total flux subtracted in 200 components = 0.557021 Jy
! Clean residual min=-0.093460 max=0.100566 Jy/beam
! Clean residual mean=-0.000360 rms=0.024298 Jy/beam
! Combined flux in latest and established models = 15.1214 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 67 components and 15.1214 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.017 mas, bmaj=3.152 mas, bpa=-4.131 degrees
! Estimated noise=0.20186 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154513 Jy
! Component: 100  -  total flux cleaned = 0.272156 Jy
! Component: 150  -  total flux cleaned = 0.366382 Jy
! Component: 200  -  total flux cleaned = 0.443986 Jy
! Total flux subtracted in 200 components = 0.443986 Jy
! Clean residual min=-0.063404 max=0.083885 Jy/beam
! Clean residual mean=-0.000417 rms=0.024338 Jy/beam
! Combined flux in latest and established models = 15.5654 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0662647 Jy
! Component: 100  -  total flux cleaned = 0.123666 Jy
! Component: 150  -  total flux cleaned = 0.173848 Jy
! Component: 200  -  total flux cleaned = 0.216264 Jy
! Total flux subtracted in 200 components = 0.216264 Jy
! Clean residual min=-0.052926 max=0.071193 Jy/beam
! Clean residual mean=-0.000263 rms=0.016913 Jy/beam
! Combined flux in latest and established models = 15.7817 Jy
! Adding 99 model components to the UV plane model.
! The established model now contains 157 components and 15.7817 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=2.319 mas, bpa=7.599 degrees
! Estimated noise=0.163932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0306858 Jy
! Component: 100  -  total flux cleaned = 0.051011 Jy
! Component: 150  -  total flux cleaned = 0.0741003 Jy
! Component: 200  -  total flux cleaned = 0.0951547 Jy
! Total flux subtracted in 200 components = 0.0951547 Jy
! Clean residual min=-0.055903 max=0.057831 Jy/beam
! Clean residual mean=-0.000092 rms=0.011070 Jy/beam
! Combined flux in latest and established models = 15.8768 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 184 components and 15.8768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=2.253362Jy  sigma=36.687864
! Fit after  self-cal, rms=2.252934Jy  sigma=36.662307
wmodel /J2253+1608_X_map.mod
! wmodel: Unable to open new model file: /J2253+1608_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J2253+1608_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.017 x 2.319 at 7.599 degrees (North through East)
! Clean map  min=-0.055206  max=12.748 Jy/beam
! Writing clean map to FITS file: .//J2253+1608_X_map.fits
wmodel .//J2253+1608_X_map.mod
! Writing 184 model components to file: .//J2253+1608_X_map.mod
wobs   .//J2253+1608_X_uvs.fits
! Writing UV FITS file: .//J2253+1608_X_uvs.fits
wwins  .//J2253+1608_X_map.win
! wwins: Wrote 6 windows to .//J2253+1608_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 12.7479 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0107074 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.25198 0.25198 0.50396 1.00792 2.01584 4.03168 8.06336 16.1267 32.2534 64.5069
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0321 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       12.747 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1190.57 
quit
! Quitting program
! Log file .//J2253+1608_X_dfm.log closed on Wed Nov 16 12:12:53 2016