! Started logfile: .//J2225+2118_X_dfm.log on Wed Nov 16 12:12:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J2225+2118_X_uvm.fits
! Reading UV FITS file: .//J2225+2118_X_uvm.fits
! AN table 1: 27 integrations on 45 of 45 possible baselines.
! AN table 2: 23 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.795888 visibilities/baseline/integration-bin.
! Found source: J2225+2118
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 13008 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2225+2118_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.411403Jy  sigma=44.406592
! Fit after  self-cal, rms=0.235932Jy  sigma=7.284632
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7331 mas, bmaj=1.913 mas, bpa=2.363 degrees
! Estimated noise=0.323941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.664307 Jy
! Component: 100  -  total flux cleaned = 0.868409 Jy
! Total flux subtracted in 100 components = 0.868409 Jy
! Clean residual min=-0.032325 max=0.089561 Jy/beam
! Clean residual mean=-0.000111 rms=0.008471 Jy/beam
! Combined flux in latest and established models = 0.868409 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.868409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.219554Jy  sigma=6.551198
! Fit after  self-cal, rms=0.218552Jy  sigma=6.516835
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102429 Jy
! Component: 100  -  total flux cleaned = 0.155952 Jy
! Total flux subtracted in 100 components = 0.155952 Jy
! Clean residual min=-0.020127 max=0.031812 Jy/beam
! Clean residual mean=-0.000073 rms=0.004529 Jy/beam
! Combined flux in latest and established models = 1.02436 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 1.02436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.129646Jy  sigma=3.758974
! Fit after  self-cal, rms=0.128720Jy  sigma=3.727080
! Inverting map 
! Added new window around map position (-0.8, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345431 Jy
! Component: 100  -  total flux cleaned = 0.0565347 Jy
! Total flux subtracted in 100 components = 0.0565347 Jy
! Clean residual min=-0.017293 max=0.024979 Jy/beam
! Clean residual mean=-0.000058 rms=0.003686 Jy/beam
! Combined flux in latest and established models = 1.0809 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 1.0809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107109Jy  sigma=3.110042
! Fit after  self-cal, rms=0.106756Jy  sigma=3.096324
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.956 mas, bmaj=2.196 mas, bpa=2.108 degrees
! Estimated noise=0.202852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0433705 Jy
! Component: 100  -  total flux cleaned = 0.07093 Jy
! Component: 150  -  total flux cleaned = 0.0910894 Jy
! Component: 200  -  total flux cleaned = 0.106188 Jy
! Total flux subtracted in 200 components = 0.106188 Jy
! Clean residual min=-0.018268 max=0.027561 Jy/beam
! Clean residual mean=-0.000068 rms=0.005028 Jy/beam
! Combined flux in latest and established models = 1.18708 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 63 components and 1.18708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080064Jy  sigma=2.414054
! Fit after  self-cal, rms=0.078975Jy  sigma=2.357530
! Inverting map 
! Added new window around map position (-7.4, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027819 Jy
! Component: 100  -  total flux cleaned = 0.0451316 Jy
! Component: 150  -  total flux cleaned = 0.0592946 Jy
! Component: 200  -  total flux cleaned = 0.0714664 Jy
! Total flux subtracted in 200 components = 0.0714664 Jy
! Clean residual min=-0.015811 max=0.016737 Jy/beam
! Clean residual mean=-0.000059 rms=0.003769 Jy/beam
! Combined flux in latest and established models = 1.25855 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 112 components and 1.25855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064796Jy  sigma=1.935610
! Fit after  self-cal, rms=0.064148Jy  sigma=1.908322
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.956 x 2.196 at 2.108 degrees (North through East)
! Clean map  min=-0.01357  max=0.91113 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.00     KP        1.06     
!   LA        0.96     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.95     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.91     HN        1.01     KP        1.07     
!   LA        0.94     MK        0.99     NL        1.02     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        0.99     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.96     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.91     HN        1.02     KP        1.07     
!   LA        0.95     MK        0.97     NL        1.03     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.00     KP        1.05     
!   LA        0.96     MK        0.99     NL        1.03     OV        0.98     
!   PT        0.96     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.91     HN        1.00     KP        1.07     
!   LA        0.94     MK        0.99     NL        1.02     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        0.99     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.03     OV        0.98     
!   PT        0.96     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.91     HN        1.01     KP        1.07     
!   LA        0.94     MK        0.98     NL        1.03     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.98     KP        1.05     
!   LA        0.97     MK        1.02     NL        1.03     OV        0.99     
!   PT        0.97     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.91     HN        1.01     KP        1.07     
!   LA        0.94     MK        0.99     NL        1.03     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.00     KP        1.06     
!   LA        0.97     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.90     HN        1.00     KP        1.07     
!   LA        0.94     MK        0.99     NL        1.01     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.00     KP        1.06     
!   LA        0.97     MK        1.04     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.91     HN        1.01     KP        1.06     
!   LA        0.94     MK        0.99     NL        1.03     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.00     KP        1.06     
!   LA        0.98     MK        1.02     NL        1.03     OV        0.99     
!   PT        0.96     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.91     HN        1.00     KP        1.06     
!   LA        0.95     MK        0.99     NL        1.03     PT        1.00     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.064148Jy  sigma=1.908322
! Fit after  self-cal, rms=0.034016Jy  sigma=0.993044
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9577 mas, bmaj=2.207 mas, bpa=2.05 degrees
! Estimated noise=0.202066 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00890164 Jy
! Component: 100  -  total flux cleaned = 0.0139385 Jy
! Component: 150  -  total flux cleaned = 0.016294 Jy
! Component: 200  -  total flux cleaned = 0.0184235 Jy
! Total flux subtracted in 200 components = 0.0184235 Jy
! Clean residual min=-0.003980 max=0.004597 Jy/beam
! Clean residual mean=0.000008 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 1.27697 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 149 components and 1.27697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030790Jy  sigma=0.880329
! Fit after  self-cal, rms=0.030708Jy  sigma=0.878249
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030708Jy  sigma=0.878249
! Fit after  self-cal, rms=0.030549Jy  sigma=0.873867
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.958 mas, bmaj=2.208 mas, bpa=2.061 degrees
! Estimated noise=0.201783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000804958 Jy
! Component: 100  -  total flux cleaned = 0.00177617 Jy
! Component: 150  -  total flux cleaned = 0.00237515 Jy
! Component: 200  -  total flux cleaned = 0.00302427 Jy
! Total flux subtracted in 200 components = 0.00302427 Jy
! Clean residual min=-0.003541 max=0.004004 Jy/beam
! Clean residual mean=0.000010 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 1.28 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 164 components and 1.28 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029550Jy  sigma=0.837697
! Fit after  self-cal, rms=0.029522Jy  sigma=0.836737
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.6, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168164 Jy
! Component: 100  -  total flux cleaned = 0.00220401 Jy
! Component: 150  -  total flux cleaned = 0.00248781 Jy
! Component: 200  -  total flux cleaned = 0.00283571 Jy
! Total flux subtracted in 200 components = 0.00283571 Jy
! Clean residual min=-0.003302 max=0.003515 Jy/beam
! Clean residual mean=0.000009 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 1.28283 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 182 components and 1.28283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028831Jy  sigma=0.811474
! Fit after  self-cal, rms=0.028816Jy  sigma=0.810991
! Inverting map 
! Added new window around map position (-14.2, -9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349037 Jy
! Component: 100  -  total flux cleaned = 0.00568054 Jy
! Component: 150  -  total flux cleaned = 0.00746187 Jy
! Component: 200  -  total flux cleaned = 0.00902388 Jy
! Total flux subtracted in 200 components = 0.00902388 Jy
! Clean residual min=-0.002946 max=0.002984 Jy/beam
! Clean residual mean=0.000005 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 1.29186 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 217 components and 1.29186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028199Jy  sigma=0.789389
! Fit after  self-cal, rms=0.028165Jy  sigma=0.788407
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028165Jy  sigma=0.788407
! Fit after  self-cal, rms=0.028031Jy  sigma=0.784339
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9575 mas, bmaj=2.208 mas, bpa=2.046 degrees
! Estimated noise=0.20157 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000201443 Jy
! Component: 100  -  total flux cleaned = 0.000839218 Jy
! Component: 150  -  total flux cleaned = 0.00178238 Jy
! Component: 200  -  total flux cleaned = 0.00266105 Jy
! Total flux subtracted in 200 components = 0.00266105 Jy
! Clean residual min=-0.002655 max=0.002895 Jy/beam
! Clean residual mean=0.000006 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 1.29452 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 229 components and 1.29452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027640Jy  sigma=0.770615
! Fit after  self-cal, rms=0.027628Jy  sigma=0.770316
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242769 Jy
! Component: 100  -  total flux cleaned = 0.00348314 Jy
! Component: 150  -  total flux cleaned = 0.00445049 Jy
! Component: 200  -  total flux cleaned = 0.00529298 Jy
! Total flux subtracted in 200 components = 0.00529298 Jy
! Clean residual min=-0.002490 max=0.002476 Jy/beam
! Clean residual mean=0.000005 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 1.29981 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 252 components and 1.29981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027259Jy  sigma=0.756967
! Fit after  self-cal, rms=0.027244Jy  sigma=0.756541
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027244Jy  sigma=0.756541
! Fit after  self-cal, rms=0.027190Jy  sigma=0.755085
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.071 mas, bmaj=2.993 mas, bpa=-1.742 degrees
! Estimated noise=0.25209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199875 Jy
! Component: 100  -  total flux cleaned = 0.00352731 Jy
! Component: 150  -  total flux cleaned = 0.00487176 Jy
! Component: 200  -  total flux cleaned = 0.0059461 Jy
! Total flux subtracted in 200 components = 0.0059461 Jy
! Clean residual min=-0.002887 max=0.002447 Jy/beam
! Clean residual mean=0.000010 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 1.30576 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 277 components and 1.30576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027023Jy  sigma=0.748195
! Fit after  self-cal, rms=0.027009Jy  sigma=0.747737
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150417 Jy
! Component: 100  -  total flux cleaned = 0.00239004 Jy
! Component: 150  -  total flux cleaned = 0.00313175 Jy
! Component: 200  -  total flux cleaned = 0.00381824 Jy
! Total flux subtracted in 200 components = 0.00381824 Jy
! Clean residual min=-0.002547 max=0.002257 Jy/beam
! Clean residual mean=0.000008 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 1.30958 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 304 components and 1.30957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026955Jy  sigma=0.745438
! Fit after  self-cal, rms=0.026950Jy  sigma=0.745280
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9571 mas, bmaj=2.208 mas, bpa=2.048 degrees
! Estimated noise=0.201447 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9571 x 2.208 at 2.048 degrees (North through East)
! Clean map  min=-0.0021822  max=0.90705 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026950Jy  sigma=0.745280
! Fit after  self-cal, rms=0.024837Jy  sigma=0.684800
! Inverting map and beam 
! Estimated beam: bmin=0.9573 mas, bmaj=2.208 mas, bpa=2.043 degrees
! Estimated noise=0.20141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000428924 Jy
! Component: 100  -  total flux cleaned = -0.000381861 Jy
! Component: 150  -  total flux cleaned = -0.000238511 Jy
! Component: 200  -  total flux cleaned = -6.00811e-05 Jy
! Total flux subtracted in 200 components = -6.00811e-05 Jy
! Clean residual min=-0.001881 max=0.002087 Jy/beam
! Clean residual mean=0.000004 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 1.30951 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 322 components and 1.30951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024647Jy  sigma=0.677899
! Fit after  self-cal, rms=0.024640Jy  sigma=0.677721
! Inverting map 
! Added new window around map position (2.4, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107539 Jy
! Component: 100  -  total flux cleaned = 0.00122415 Jy
! Component: 150  -  total flux cleaned = 0.00157111 Jy
! Component: 200  -  total flux cleaned = 0.00189458 Jy
! Total flux subtracted in 200 components = 0.00189458 Jy
! Clean residual min=-0.001631 max=0.001764 Jy/beam
! Clean residual mean=0.000004 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 1.31141 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 335 components and 1.31141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024433Jy  sigma=0.670042
! Fit after  self-cal, rms=0.024422Jy  sigma=0.669729
! Inverting map 
! Added new window around map position (8.2, -27).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106496 Jy
! Component: 100  -  total flux cleaned = 0.00126586 Jy
! Component: 150  -  total flux cleaned = 0.00156504 Jy
! Component: 200  -  total flux cleaned = 0.00181354 Jy
! Total flux subtracted in 200 components = 0.00181354 Jy
! Clean residual min=-0.001582 max=0.001553 Jy/beam
! Clean residual mean=0.000004 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 1.31322 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 354 components and 1.31322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024278Jy  sigma=0.664667
! Fit after  self-cal, rms=0.024274Jy  sigma=0.664522
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024274Jy  sigma=0.664522
! Fit after  self-cal, rms=0.024231Jy  sigma=0.663792
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7322 mas, bmaj=1.919 mas, bpa=2.272 degrees
! Estimated noise=0.3221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.660287 Jy
! Component: 100  -  total flux cleaned = 0.873746 Jy
! Component: 150  -  total flux cleaned = 0.975079 Jy
! Component: 200  -  total flux cleaned = 1.02811 Jy
! Total flux subtracted in 200 components = 1.02811 Jy
! Clean residual min=-0.013453 max=0.026266 Jy/beam
! Clean residual mean=-0.000037 rms=0.003428 Jy/beam
! Combined flux in latest and established models = 1.02811 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.02811 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9571 mas, bmaj=2.208 mas, bpa=2.043 degrees
! Estimated noise=0.201325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0540852 Jy
! Component: 100  -  total flux cleaned = 0.0869999 Jy
! Component: 150  -  total flux cleaned = 0.11149 Jy
! Component: 200  -  total flux cleaned = 0.131248 Jy
! Total flux subtracted in 200 components = 0.131248 Jy
! Clean residual min=-0.008457 max=0.014319 Jy/beam
! Clean residual mean=-0.000017 rms=0.002952 Jy/beam
! Combined flux in latest and established models = 1.15936 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 66 components and 1.15936 Jy
! Inverting map 
! Added new window around map position (-3.8, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167655 Jy
! Component: 100  -  total flux cleaned = 0.0305056 Jy
! Component: 150  -  total flux cleaned = 0.0420975 Jy
! Component: 200  -  total flux cleaned = 0.0519382 Jy
! Total flux subtracted in 200 components = 0.0519382 Jy
! Clean residual min=-0.005693 max=0.006677 Jy/beam
! Clean residual mean=-0.000002 rms=0.001745 Jy/beam
! Combined flux in latest and established models = 1.21129 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 116 components and 1.21129 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.072 mas, bmaj=2.994 mas, bpa=-1.736 degrees
! Estimated noise=0.251892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153113 Jy
! Component: 100  -  total flux cleaned = 0.026561 Jy
! Component: 150  -  total flux cleaned = 0.0354941 Jy
! Component: 200  -  total flux cleaned = 0.0428997 Jy
! Total flux subtracted in 200 components = 0.0428997 Jy
! Clean residual min=-0.006040 max=0.005634 Jy/beam
! Clean residual mean=0.000008 rms=0.001854 Jy/beam
! Combined flux in latest and established models = 1.25419 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00623755 Jy
! Component: 100  -  total flux cleaned = 0.0115646 Jy
! Component: 150  -  total flux cleaned = 0.0161557 Jy
! Component: 200  -  total flux cleaned = 0.0201603 Jy
! Total flux subtracted in 200 components = 0.0201603 Jy
! Clean residual min=-0.004591 max=0.003942 Jy/beam
! Clean residual mean=0.000009 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 1.27435 Jy
! Adding 161 model components to the UV plane model.
! The established model now contains 259 components and 1.27435 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9571 mas, bmaj=2.208 mas, bpa=2.043 degrees
! Estimated noise=0.201325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032555 Jy
! Component: 100  -  total flux cleaned = 0.00597021 Jy
! Component: 150  -  total flux cleaned = 0.00779619 Jy
! Component: 200  -  total flux cleaned = 0.00938002 Jy
! Total flux subtracted in 200 components = 0.00938002 Jy
! Clean residual min=-0.002800 max=0.002499 Jy/beam
! Clean residual mean=0.000006 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 1.28373 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 287 components and 1.28373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025547Jy  sigma=0.709268
! Fit after  self-cal, rms=0.025378Jy  sigma=0.702876
wmodel /J2225+2118_X_map.mod
! wmodel: Unable to open new model file: /J2225+2118_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J2225+2118_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9571 x 2.208 at 2.043 degrees (North through East)
! Clean map  min=-0.0027534  max=0.90678 Jy/beam
! Writing clean map to FITS file: .//J2225+2118_X_map.fits
wmodel .//J2225+2118_X_map.mod
! Writing 287 model components to file: .//J2225+2118_X_map.mod
wobs   .//J2225+2118_X_uvs.fits
! Writing UV FITS file: .//J2225+2118_X_uvs.fits
wwins  .//J2225+2118_X_map.win
! wwins: Wrote 11 windows to .//J2225+2118_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.906782 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000577025 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.190903 0.190903 0.381806 0.763612 1.52722 3.05445 6.1089 12.2178 24.4356 48.8712 97.7424
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.906 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1571.48 
quit
! Quitting program
! Log file .//J2225+2118_X_dfm.log closed on Wed Nov 16 12:12:24 2016