! Started logfile: .//J2150-1822_X_dfm.log on Wed Nov 16 12:11:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J2150-1822_X_uva.fits
! Reading UV FITS file: .//J2150-1822_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.739352 visibilities/baseline/integration-bin.
! Found source: J2150-1822
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 12776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2150-1822_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001178Jy  sigma=26.757704
! Fit after  self-cal, rms=0.922619Jy  sigma=24.636466
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8179 mas, bmaj=2.185 mas, bpa=0.9638 degrees
! Estimated noise=0.373773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0600118 Jy
! Component: 100  -  total flux cleaned = 0.0731181 Jy
! Total flux subtracted in 100 components = 0.0731181 Jy
! Clean residual min=-0.002266 max=0.003856 Jy/beam
! Clean residual mean=0.000007 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.0731181 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0731181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031453Jy  sigma=0.711373
! Fit after  self-cal, rms=0.031420Jy  sigma=0.711005
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380331 Jy
! Component: 100  -  total flux cleaned = 0.00553072 Jy
! Total flux subtracted in 100 components = 0.00553072 Jy
! Clean residual min=-0.002209 max=0.002765 Jy/beam
! Clean residual mean=0.000003 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0786488 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.0786488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030851Jy  sigma=0.691826
! Fit after  self-cal, rms=0.030846Jy  sigma=0.691708
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=2.661 mas, bpa=3.355 degrees
! Estimated noise=0.240812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031805 Jy
! Component: 100  -  total flux cleaned = 0.00494534 Jy
! Component: 150  -  total flux cleaned = 0.00618949 Jy
! Component: 200  -  total flux cleaned = 0.0071031 Jy
! Total flux subtracted in 200 components = 0.0071031 Jy
! Clean residual min=-0.001533 max=0.001841 Jy/beam
! Clean residual mean=0.000002 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.0857519 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 57 components and 0.0857519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030486Jy  sigma=0.681023
! Fit after  self-cal, rms=0.030455Jy  sigma=0.679992
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 2.661 at 3.355 degrees (North through East)
! Clean map  min=-0.0015034  max=0.07634 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.05     KP        1.04     
!   LA        0.95     MK        0.95     NL        1.02     OV        1.02     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.91     HN        1.02     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.04     OV        1.01     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.05     KP        1.03     
!   LA        0.95     MK        0.95     NL        1.05     OV        0.99     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.04     KP        1.04     
!   LA        0.98     MK        0.94     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.05     KP        1.05     
!   LA        0.98     MK        0.97     NL        1.05     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        1.08     KP        1.05     
!   LA        0.98     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.92     HN        1.05     KP        1.05     
!   LA        0.98     MK        1.02     NL        1.02     OV        1.02     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.95     HN        1.05     KP        1.06     
!   LA        0.98     MK        1.00     NL        1.05     OV        0.97     
!   PT        0.94     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.030455Jy  sigma=0.679992
! Fit after  self-cal, rms=0.030552Jy  sigma=0.669157
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.681 mas, bpa=3.066 degrees
! Estimated noise=0.241585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149363 Jy
! Component: 100  -  total flux cleaned = -0.000248221 Jy
! Component: 150  -  total flux cleaned = -0.000316232 Jy
! Component: 200  -  total flux cleaned = -0.000391432 Jy
! Total flux subtracted in 200 components = -0.000391432 Jy
! Clean residual min=-0.000984 max=0.000948 Jy/beam
! Clean residual mean=-0.000003 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0853605 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 71 components and 0.0853605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030523Jy  sigma=0.668561
! Fit after  self-cal, rms=0.030520Jy  sigma=0.668426
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030520Jy  sigma=0.668426
! Fit after  self-cal, rms=0.030610Jy  sigma=0.665501
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.679 mas, bpa=3.115 degrees
! Estimated noise=0.241345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.79749e-05 Jy
! Component: 100  -  total flux cleaned = 6.15294e-05 Jy
! Component: 150  -  total flux cleaned = 8.37478e-05 Jy
! Component: 200  -  total flux cleaned = 6.60754e-05 Jy
! Total flux subtracted in 200 components = 6.60754e-05 Jy
! Clean residual min=-0.000854 max=0.000709 Jy/beam
! Clean residual mean=-0.000002 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.0854266 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.0854266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030596Jy  sigma=0.665153
! Fit after  self-cal, rms=0.030597Jy  sigma=0.665092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.91529e-08 Jy
! Component: 100  -  total flux cleaned = -8.91459e-08 Jy
! Component: 150  -  total flux cleaned = -2.34973e-05 Jy
! Component: 200  -  total flux cleaned = -3.06881e-05 Jy
! Total flux subtracted in 200 components = -3.06881e-05 Jy
! Clean residual min=-0.000857 max=0.000686 Jy/beam
! Clean residual mean=-0.000002 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.0853959 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 88 components and 0.0853959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030592Jy  sigma=0.664977
! Fit after  self-cal, rms=0.030591Jy  sigma=0.664965
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030591Jy  sigma=0.664965
! Fit after  self-cal, rms=0.030600Jy  sigma=0.664913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.677 mas, bpa=3.135 degrees
! Estimated noise=0.241134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.42685e-05 Jy
! Component: 100  -  total flux cleaned = -3.40989e-05 Jy
! Component: 150  -  total flux cleaned = -4.71752e-05 Jy
! Component: 200  -  total flux cleaned = -6.50219e-05 Jy
! Total flux subtracted in 200 components = -6.50219e-05 Jy
! Clean residual min=-0.000848 max=0.000685 Jy/beam
! Clean residual mean=-0.000001 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.0853309 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.0853309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030595Jy  sigma=0.664820
! Fit after  self-cal, rms=0.030595Jy  sigma=0.664809
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.00001e-06 Jy
! Component: 100  -  total flux cleaned = -1.05501e-05 Jy
! Component: 150  -  total flux cleaned = -2.61792e-05 Jy
! Component: 200  -  total flux cleaned = -3.5674e-05 Jy
! Total flux subtracted in 200 components = -3.5674e-05 Jy
! Clean residual min=-0.000848 max=0.000688 Jy/beam
! Clean residual mean=-0.000001 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.0852952 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 0.0852952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030593Jy  sigma=0.664762
! Fit after  self-cal, rms=0.030592Jy  sigma=0.664757
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030592Jy  sigma=0.664757
! Fit after  self-cal, rms=0.030595Jy  sigma=0.664744
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=4.619 mas, bpa=2.442 degrees
! Estimated noise=0.288561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.1283e-05 Jy
! Component: 100  -  total flux cleaned = 7.15254e-05 Jy
! Component: 150  -  total flux cleaned = 5.6871e-05 Jy
! Component: 200  -  total flux cleaned = 5.69353e-05 Jy
! Total flux subtracted in 200 components = 5.69353e-05 Jy
! Clean residual min=-0.000834 max=0.000831 Jy/beam
! Clean residual mean=-0.000003 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0853522 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.0853522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030594Jy  sigma=0.664730
! Fit after  self-cal, rms=0.030594Jy  sigma=0.664724
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.31766e-05 Jy
! Component: 100  -  total flux cleaned = 1.64985e-05 Jy
! Component: 150  -  total flux cleaned = 1.04359e-05 Jy
! Component: 200  -  total flux cleaned = 4.63482e-06 Jy
! Total flux subtracted in 200 components = 4.63482e-06 Jy
! Clean residual min=-0.000837 max=0.000823 Jy/beam
! Clean residual mean=-0.000002 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0853568 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 127 components and 0.0853568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030593Jy  sigma=0.664720
! Fit after  self-cal, rms=0.030593Jy  sigma=0.664718
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.676 mas, bpa=3.152 degrees
! Estimated noise=0.241027 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 2.676 at 3.152 degrees (North through East)
! Clean map  min=-0.00079504  max=0.076374 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8172 mas, bmaj=2.182 mas, bpa=1.057 degrees
! Estimated noise=0.374216 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0598981 Jy
! Component: 100  -  total flux cleaned = 0.0730498 Jy
! Component: 150  -  total flux cleaned = 0.0773148 Jy
! Component: 200  -  total flux cleaned = 0.0796282 Jy
! Total flux subtracted in 200 components = 0.0796282 Jy
! Clean residual min=-0.001349 max=0.001325 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0796282 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0796282 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.676 mas, bpa=3.152 degrees
! Estimated noise=0.241027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207642 Jy
! Component: 100  -  total flux cleaned = 0.00322085 Jy
! Component: 150  -  total flux cleaned = 0.0039735 Jy
! Component: 200  -  total flux cleaned = 0.00451127 Jy
! Total flux subtracted in 200 components = 0.00451127 Jy
! Clean residual min=-0.000881 max=0.000694 Jy/beam
! Clean residual mean=-0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0841395 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 50 components and 0.0841395 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=4.619 mas, bpa=2.442 degrees
! Estimated noise=0.288561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00047923 Jy
! Component: 100  -  total flux cleaned = 0.000762928 Jy
! Component: 150  -  total flux cleaned = 0.000844621 Jy
! Component: 200  -  total flux cleaned = 0.000859141 Jy
! Total flux subtracted in 200 components = 0.000859141 Jy
! Clean residual min=-0.000861 max=0.000809 Jy/beam
! Clean residual mean=-0.000002 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0849986 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.03956e-05 Jy
! Component: 100  -  total flux cleaned = 3.35327e-05 Jy
! Component: 150  -  total flux cleaned = 5.163e-05 Jy
! Component: 200  -  total flux cleaned = 6.30867e-05 Jy
! Total flux subtracted in 200 components = 6.30867e-05 Jy
! Clean residual min=-0.000852 max=0.000811 Jy/beam
! Clean residual mean=-0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0850617 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 67 components and 0.0850617 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.676 mas, bpa=3.152 degrees
! Estimated noise=0.241027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110709 Jy
! Component: 100  -  total flux cleaned = -0.000110541 Jy
! Component: 150  -  total flux cleaned = -9.30328e-05 Jy
! Component: 200  -  total flux cleaned = -8.44787e-05 Jy
! Total flux subtracted in 200 components = -8.44787e-05 Jy
! Clean residual min=-0.000851 max=0.000709 Jy/beam
! Clean residual mean=-0.000001 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0849772 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 78 components and 0.0849772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030605Jy  sigma=0.664968
! Fit after  self-cal, rms=0.030600Jy  sigma=0.664895
wmodel /J2150-1822_X_map.mod
! wmodel: Unable to open new model file: /J2150-1822_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J2150-1822_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 2.676 at 3.152 degrees (North through East)
! Clean map  min=-0.00080195  max=0.076406 Jy/beam
! Writing clean map to FITS file: .//J2150-1822_X_map.fits
wmodel .//J2150-1822_X_map.mod
! Writing 78 model components to file: .//J2150-1822_X_map.mod
wobs   .//J2150-1822_X_uvs.fits
! Writing UV FITS file: .//J2150-1822_X_uvs.fits
wwins  .//J2150-1822_X_map.win
! wwins: Wrote 2 windows to .//J2150-1822_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0764059 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180462 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.708567 0.708567 1.41713 2.83427 5.66854 11.3371 22.6742 45.3483 90.6966
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  423.389 
quit
! Quitting program
! Log file .//J2150-1822_X_dfm.log closed on Wed Nov 16 12:11:38 2016