! Started logfile: .//J2150+5103_X_dfm.log on Wed Nov 16 12:11:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J2150+5103_X_uva.fits
! Reading UV FITS file: .//J2150+5103_X_uva.fits
! AN table 1: 27 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.799177 visibilities/baseline/integration-bin.
! Found source: J2150+5103
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 7768 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2150+5103_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034353Jy  sigma=34.705575
! Fit after  self-cal, rms=0.781000Jy  sigma=26.332124
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7063 mas, bmaj=2.574 mas, bpa=9.986 degrees
! Estimated noise=0.384787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173414 Jy
! Component: 100  -  total flux cleaned = 0.21123 Jy
! Total flux subtracted in 100 components = 0.21123 Jy
! Clean residual min=-0.010816 max=0.011432 Jy/beam
! Clean residual mean=-0.000001 rms=0.001512 Jy/beam
! Combined flux in latest and established models = 0.21123 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.21123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034014Jy  sigma=1.085949
! Fit after  self-cal, rms=0.034009Jy  sigma=1.085774
! Inverting map 
! Added new window around map position (4.6, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000763637 Jy
! Component: 100  -  total flux cleaned = -0.00111055 Jy
! Total flux subtracted in 100 components = -0.00111055 Jy
! Clean residual min=-0.005159 max=0.007849 Jy/beam
! Clean residual mean=-0.000002 rms=0.001133 Jy/beam
! Combined flux in latest and established models = 0.210119 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.210119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030272Jy  sigma=0.956949
! Fit after  self-cal, rms=0.030164Jy  sigma=0.953650
! Inverting map 
! Added new window around map position (-10.4, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451644 Jy
! Component: 100  -  total flux cleaned = 0.00457185 Jy
! Total flux subtracted in 100 components = 0.00457185 Jy
! Clean residual min=-0.004392 max=0.006401 Jy/beam
! Clean residual mean=-0.000002 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.214691 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.214691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028678Jy  sigma=0.901994
! Fit after  self-cal, rms=0.028616Jy  sigma=0.899702
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8599 mas, bmaj=2.77 mas, bpa=9.186 degrees
! Estimated noise=0.243069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.4, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00609428 Jy
! Component: 100  -  total flux cleaned = 0.0075647 Jy
! Component: 150  -  total flux cleaned = 0.00743825 Jy
! Component: 200  -  total flux cleaned = 0.00713135 Jy
! Total flux subtracted in 200 components = 0.00713135 Jy
! Clean residual min=-0.003729 max=0.004870 Jy/beam
! Clean residual mean=-0.000006 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.221822 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 36 components and 0.221822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026896Jy  sigma=0.843307
! Fit after  self-cal, rms=0.026868Jy  sigma=0.842430
! Inverting map 
! Added new window around map position (1.4, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427147 Jy
! Component: 100  -  total flux cleaned = 0.00546559 Jy
! Component: 150  -  total flux cleaned = 0.00679814 Jy
! Component: 200  -  total flux cleaned = 0.00790533 Jy
! Total flux subtracted in 200 components = 0.00790533 Jy
! Clean residual min=-0.003109 max=0.003175 Jy/beam
! Clean residual mean=-0.000004 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.229728 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 56 components and 0.229728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025854Jy  sigma=0.810255
! Fit after  self-cal, rms=0.025836Jy  sigma=0.809781
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8599 x 2.77 at 9.186 degrees (North through East)
! Clean map  min=-0.0034543  max=0.21408 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.95     KP        1.06     
!   LA        0.99     MK        0.97     NL        1.02     OV        1.01     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.94     KP        1.04     
!   LA        0.99     MK        0.97     NL        1.01     OV        1.01     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.91     KP        1.04     
!   LA        1.00     MK        0.97     NL        0.99     OV        1.01     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.95     KP        1.03     
!   LA        0.99     MK        1.03     NL        1.00     OV        1.00     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.95     KP        1.03     
!   LA        0.99     MK        0.99     NL        1.00     OV        1.01     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.92     KP        1.04     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.99     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.99     KP        1.03     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.99     KP        1.05     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.99     
!   PT        1.01     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.025836Jy  sigma=0.809781
! Fit after  self-cal, rms=0.023847Jy  sigma=0.756362
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8514 mas, bmaj=2.758 mas, bpa=9.142 degrees
! Estimated noise=0.242388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000880848 Jy
! Component: 100  -  total flux cleaned = -0.00106899 Jy
! Component: 150  -  total flux cleaned = -0.00111991 Jy
! Component: 200  -  total flux cleaned = -0.00125392 Jy
! Total flux subtracted in 200 components = -0.00125392 Jy
! Clean residual min=-0.001958 max=0.001844 Jy/beam
! Clean residual mean=-0.000004 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.228474 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 79 components and 0.228474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023599Jy  sigma=0.747525
! Fit after  self-cal, rms=0.023591Jy  sigma=0.747418
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023591Jy  sigma=0.747418
! Fit after  self-cal, rms=0.023539Jy  sigma=0.746617
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8508 mas, bmaj=2.756 mas, bpa=9.123 degrees
! Estimated noise=0.242328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000308027 Jy
! Component: 100  -  total flux cleaned = -0.000228154 Jy
! Component: 150  -  total flux cleaned = -0.000266366 Jy
! Component: 200  -  total flux cleaned = -0.000301376 Jy
! Total flux subtracted in 200 components = -0.000301376 Jy
! Clean residual min=-0.001796 max=0.001833 Jy/beam
! Clean residual mean=-0.000003 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.228172 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 89 components and 0.228172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023407Jy  sigma=0.742021
! Fit after  self-cal, rms=0.023406Jy  sigma=0.741994
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.93389e-05 Jy
! Component: 100  -  total flux cleaned = -1.00761e-05 Jy
! Component: 150  -  total flux cleaned = 4.45318e-05 Jy
! Component: 200  -  total flux cleaned = 9.68923e-05 Jy
! Total flux subtracted in 200 components = 9.68923e-05 Jy
! Clean residual min=-0.001740 max=0.001811 Jy/beam
! Clean residual mean=-0.000003 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.228269 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 101 components and 0.228269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023345Jy  sigma=0.739940
! Fit after  self-cal, rms=0.023345Jy  sigma=0.739926
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023345Jy  sigma=0.739926
! Fit after  self-cal, rms=0.023285Jy  sigma=0.738667
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8499 mas, bmaj=2.754 mas, bpa=9.108 degrees
! Estimated noise=0.242314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000379599 Jy
! Component: 100  -  total flux cleaned = -0.000473942 Jy
! Component: 150  -  total flux cleaned = -0.000393904 Jy
! Component: 200  -  total flux cleaned = -0.000321076 Jy
! Total flux subtracted in 200 components = -0.000321076 Jy
! Clean residual min=-0.001630 max=0.001813 Jy/beam
! Clean residual mean=-0.000003 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.227948 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 116 components and 0.227948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023216Jy  sigma=0.736325
! Fit after  self-cal, rms=0.023216Jy  sigma=0.736309
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157442 Jy
! Component: 100  -  total flux cleaned = 0.00223319 Jy
! Component: 150  -  total flux cleaned = 0.00262831 Jy
! Component: 200  -  total flux cleaned = 0.00276502 Jy
! Total flux subtracted in 200 components = 0.00276502 Jy
! Clean residual min=-0.001456 max=0.001320 Jy/beam
! Clean residual mean=-0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.230713 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 147 components and 0.230713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023025Jy  sigma=0.729615
! Fit after  self-cal, rms=0.023023Jy  sigma=0.729522
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023023Jy  sigma=0.729522
! Fit after  self-cal, rms=0.022984Jy  sigma=0.728818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.911 mas, bmaj=3.061 mas, bpa=5.684 degrees
! Estimated noise=0.32229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000254092 Jy
! Component: 100  -  total flux cleaned = 0.000623374 Jy
! Component: 150  -  total flux cleaned = 0.000773409 Jy
! Component: 200  -  total flux cleaned = 0.00077419 Jy
! Total flux subtracted in 200 components = 0.00077419 Jy
! Clean residual min=-0.001795 max=0.001534 Jy/beam
! Clean residual mean=-0.000004 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.231487 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 174 components and 0.231487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022930Jy  sigma=0.727142
! Fit after  self-cal, rms=0.022928Jy  sigma=0.727032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.19356e-05 Jy
! Component: 100  -  total flux cleaned = -2.40009e-05 Jy
! Component: 150  -  total flux cleaned = -4.98861e-05 Jy
! Component: 200  -  total flux cleaned = -7.36054e-05 Jy
! Total flux subtracted in 200 components = -7.36054e-05 Jy
! Clean residual min=-0.001591 max=0.001395 Jy/beam
! Clean residual mean=-0.000004 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.231414 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 189 components and 0.231414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022919Jy  sigma=0.726678
! Fit after  self-cal, rms=0.022918Jy  sigma=0.726657
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8492 mas, bmaj=2.753 mas, bpa=9.09 degrees
! Estimated noise=0.242243 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8492 x 2.753 at 9.09 degrees (North through East)
! Clean map  min=-0.002316  max=0.21395 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6995 mas, bmaj=2.568 mas, bpa=9.873 degrees
! Estimated noise=0.381023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.171693 Jy
! Component: 100  -  total flux cleaned = 0.209136 Jy
! Component: 150  -  total flux cleaned = 0.216165 Jy
! Component: 200  -  total flux cleaned = 0.217587 Jy
! Total flux subtracted in 200 components = 0.217587 Jy
! Clean residual min=-0.004185 max=0.005062 Jy/beam
! Clean residual mean=-0.000001 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.217587 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.217587 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8492 mas, bmaj=2.753 mas, bpa=9.09 degrees
! Estimated noise=0.242243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00529875 Jy
! Component: 100  -  total flux cleaned = 0.0077626 Jy
! Component: 150  -  total flux cleaned = 0.0097595 Jy
! Component: 200  -  total flux cleaned = 0.0111335 Jy
! Total flux subtracted in 200 components = 0.0111335 Jy
! Clean residual min=-0.002187 max=0.002421 Jy/beam
! Clean residual mean=-0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.228721 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.228721 Jy
! Inverting map 
! Added new window around map position (3.4, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139347 Jy
! Component: 100  -  total flux cleaned = 0.00186876 Jy
! Component: 150  -  total flux cleaned = 0.00229452 Jy
! Component: 200  -  total flux cleaned = 0.00274226 Jy
! Total flux subtracted in 200 components = 0.00274226 Jy
! Clean residual min=-0.001740 max=0.001917 Jy/beam
! Clean residual mean=-0.000001 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.231463 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 52 components and 0.231463 Jy
! Inverting map 
! Added new window around map position (3.8, -12.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000928926 Jy
! Component: 100  -  total flux cleaned = 0.00115969 Jy
! Component: 150  -  total flux cleaned = 0.00131711 Jy
! Component: 200  -  total flux cleaned = 0.00146038 Jy
! Total flux subtracted in 200 components = 0.00146038 Jy
! Clean residual min=-0.001591 max=0.001534 Jy/beam
! Clean residual mean=-0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.232923 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 72 components and 0.232923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.911 mas, bmaj=3.061 mas, bpa=5.684 degrees
! Estimated noise=0.32229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000596663 Jy
! Component: 100  -  total flux cleaned = -0.00064156 Jy
! Component: 150  -  total flux cleaned = -0.00077731 Jy
! Component: 200  -  total flux cleaned = -0.000903736 Jy
! Total flux subtracted in 200 components = -0.000903736 Jy
! Clean residual min=-0.001753 max=0.001776 Jy/beam
! Clean residual mean=-0.000002 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.232019 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.9912e-05 Jy
! Component: 100  -  total flux cleaned = -7.65195e-05 Jy
! Component: 150  -  total flux cleaned = -4.23035e-05 Jy
! Component: 200  -  total flux cleaned = -4.37608e-05 Jy
! Total flux subtracted in 200 components = -4.37608e-05 Jy
! Clean residual min=-0.001537 max=0.001582 Jy/beam
! Clean residual mean=-0.000002 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.231976 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 107 components and 0.231976 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8492 mas, bmaj=2.753 mas, bpa=9.09 degrees
! Estimated noise=0.242243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000317966 Jy
! Component: 100  -  total flux cleaned = 0.000590971 Jy
! Component: 150  -  total flux cleaned = 0.000623698 Jy
! Component: 200  -  total flux cleaned = 0.000796945 Jy
! Total flux subtracted in 200 components = 0.000796945 Jy
! Clean residual min=-0.001240 max=0.001122 Jy/beam
! Clean residual mean=-0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.232773 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 131 components and 0.232773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022938Jy  sigma=0.727242
! Fit after  self-cal, rms=0.022919Jy  sigma=0.726610
wmodel /J2150+5103_X_map.mod
! wmodel: Unable to open new model file: /J2150+5103_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J2150+5103_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8492 x 2.753 at 9.09 degrees (North through East)
! Clean map  min=-0.0020327  max=0.21289 Jy/beam
! Writing clean map to FITS file: .//J2150+5103_X_map.fits
wmodel .//J2150+5103_X_map.mod
! Writing 131 model components to file: .//J2150+5103_X_map.mod
wobs   .//J2150+5103_X_uvs.fits
! Writing UV FITS file: .//J2150+5103_X_uvs.fits
wwins  .//J2150+5103_X_map.win
! wwins: Wrote 8 windows to .//J2150+5103_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.212894 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000282399 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.397943 0.397943 0.795886 1.59177 3.18354 6.36709 12.7342 25.4684 50.9367
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.212 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  753.876 
quit
! Quitting program
! Log file .//J2150+5103_X_dfm.log closed on Wed Nov 16 12:11:30 2016