! Started logfile: .//J2005-3723_X_dfm.log on Wed Nov 16 12:08:27 2016 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J2005-3723_X_uva.fits ! Reading UV FITS file: .//J2005-3723_X_uva.fits ! AN table 1: 26 integrations on 21 of 21 possible baselines. ! AN table 2: 34 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.657062 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): I ! ! Read 94 lines of history. ! ! Reading 9304 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Polarization RR is unavailable. ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: I, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2005-3723_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 105 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.103489Jy sigma=21.483942 ! Fit after self-cal, rms=0.601328Jy sigma=10.656244 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6856 mas, bmaj=2.167 mas, bpa=3.985 degrees ! Estimated noise=0.607658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310229 Jy ! Component: 100 - total flux cleaned = 0.388198 Jy ! Total flux subtracted in 100 components = 0.388198 Jy ! Clean residual min=-0.026955 max=0.045703 Jy/beam ! Clean residual mean=-0.000081 rms=0.006695 Jy/beam ! Combined flux in latest and established models = 0.388198 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.388198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.143455Jy sigma=2.534214 ! Fit after self-cal, rms=0.143441Jy sigma=2.534076 ! Inverting map ! Added new window around map position (-0.2, -4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463536 Jy ! Component: 100 - total flux cleaned = 0.0740672 Jy ! Total flux subtracted in 100 components = 0.0740672 Jy ! Clean residual min=-0.019551 max=0.037312 Jy/beam ! Clean residual mean=-0.000056 rms=0.005111 Jy/beam ! Combined flux in latest and established models = 0.462265 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.462265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.123086Jy sigma=1.891403 ! Fit after self-cal, rms=0.122070Jy sigma=1.858363 ! Inverting map ! Added new window around map position (2.4, 4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342448 Jy ! Component: 100 - total flux cleaned = 0.0520918 Jy ! Total flux subtracted in 100 components = 0.0520918 Jy ! Clean residual min=-0.019741 max=0.029575 Jy/beam ! Clean residual mean=-0.000033 rms=0.004014 Jy/beam ! Combined flux in latest and established models = 0.514357 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 0.514357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.110834Jy sigma=1.559796 ! Fit after self-cal, rms=0.109165Jy sigma=1.505204 ! Inverting map ! Added new window around map position (2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229064 Jy ! Component: 100 - total flux cleaned = 0.0298733 Jy ! Total flux subtracted in 100 components = 0.0298733 Jy ! Clean residual min=-0.018125 max=0.021495 Jy/beam ! Clean residual mean=-0.000020 rms=0.003449 Jy/beam ! Combined flux in latest and established models = 0.54423 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.54423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.102268Jy sigma=1.383935 ! Fit after self-cal, rms=0.101234Jy sigma=1.346585 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9203 mas, bmaj=2.648 mas, bpa=2.587 degrees ! Estimated noise=0.409984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182903 Jy ! Component: 100 - total flux cleaned = 0.0235232 Jy ! Component: 150 - total flux cleaned = 0.025919 Jy ! Component: 200 - total flux cleaned = 0.0282537 Jy ! Total flux subtracted in 200 components = 0.0282537 Jy ! Clean residual min=-0.015112 max=0.018508 Jy/beam ! Clean residual mean=-0.000029 rms=0.003879 Jy/beam ! Combined flux in latest and established models = 0.572484 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.572484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096160Jy sigma=1.257571 ! Fit after self-cal, rms=0.095877Jy sigma=1.238930 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9203 x 2.648 at 2.587 degrees (North through East) ! Clean map min=-0.013114 max=0.37049 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.095877Jy sigma=1.238930 ! Fit after self-cal, rms=0.095676Jy sigma=1.239322 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9198 mas, bmaj=2.647 mas, bpa=2.578 degrees ! Estimated noise=0.410002 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490623 Jy ! Component: 100 - total flux cleaned = 0.00608311 Jy ! Component: 150 - total flux cleaned = 0.00656808 Jy ! Component: 200 - total flux cleaned = 0.00700393 Jy ! Total flux subtracted in 200 components = 0.00700393 Jy ! Clean residual min=-0.013702 max=0.015936 Jy/beam ! Clean residual mean=-0.000018 rms=0.003669 Jy/beam ! Combined flux in latest and established models = 0.579488 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.579488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092773Jy sigma=1.215116 ! Fit after self-cal, rms=0.092710Jy sigma=1.205985 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092710Jy sigma=1.205985 ! Fit after self-cal, rms=0.092959Jy sigma=1.198913 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9198 mas, bmaj=2.648 mas, bpa=2.584 degrees ! Estimated noise=0.409972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271309 Jy ! Component: 100 - total flux cleaned = 0.00299935 Jy ! Component: 150 - total flux cleaned = 0.00300799 Jy ! Component: 200 - total flux cleaned = 0.00301434 Jy ! Total flux subtracted in 200 components = 0.00301434 Jy ! Clean residual min=-0.012959 max=0.014946 Jy/beam ! Clean residual mean=-0.000011 rms=0.003492 Jy/beam ! Combined flux in latest and established models = 0.582502 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.582502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091267Jy sigma=1.184356 ! Fit after self-cal, rms=0.091313Jy sigma=1.180017 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246266 Jy ! Component: 100 - total flux cleaned = 0.00266823 Jy ! Component: 150 - total flux cleaned = 0.00266797 Jy ! Component: 200 - total flux cleaned = 0.00266589 Jy ! Total flux subtracted in 200 components = 0.00266589 Jy ! Clean residual min=-0.013009 max=0.014268 Jy/beam ! Clean residual mean=-0.000007 rms=0.003424 Jy/beam ! Combined flux in latest and established models = 0.585168 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.585168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.090184Jy sigma=1.170005 ! Fit after self-cal, rms=0.090243Jy sigma=1.167336 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.090243Jy sigma=1.167336 ! Fit after self-cal, rms=0.091027Jy sigma=1.142250 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9197 mas, bmaj=2.648 mas, bpa=2.614 degrees ! Estimated noise=0.411547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394789 Jy ! Component: 100 - total flux cleaned = -0.0002251 Jy ! Component: 150 - total flux cleaned = -0.000633649 Jy ! Component: 200 - total flux cleaned = -0.00100702 Jy ! Total flux subtracted in 200 components = -0.00100702 Jy ! Clean residual min=-0.013218 max=0.013219 Jy/beam ! Clean residual mean=0.000002 rms=0.003202 Jy/beam ! Combined flux in latest and established models = 0.584161 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.584161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.090352Jy sigma=1.134199 ! Fit after self-cal, rms=0.090415Jy sigma=1.132679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102622 Jy ! Component: 100 - total flux cleaned = 0.000530752 Jy ! Component: 150 - total flux cleaned = 0.000306223 Jy ! Component: 200 - total flux cleaned = 0.000199869 Jy ! Total flux subtracted in 200 components = 0.000199869 Jy ! Clean residual min=-0.012965 max=0.012846 Jy/beam ! Clean residual mean=0.000002 rms=0.003179 Jy/beam ! Combined flux in latest and established models = 0.584361 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.584361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089906Jy sigma=1.128400 ! Fit after self-cal, rms=0.089932Jy sigma=1.127399 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089932Jy sigma=1.127399 ! Fit after self-cal, rms=0.090014Jy sigma=1.127032 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=6.487 mas, bpa=1.249 degrees ! Estimated noise=0.520431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350016 Jy ! Component: 100 - total flux cleaned = -0.000195041 Jy ! Component: 150 - total flux cleaned = -0.000191498 Jy ! Component: 200 - total flux cleaned = -0.000290913 Jy ! Total flux subtracted in 200 components = -0.000290913 Jy ! Clean residual min=-0.015498 max=0.015948 Jy/beam ! Clean residual mean=0.000011 rms=0.004919 Jy/beam ! Combined flux in latest and established models = 0.58407 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.58407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089773Jy sigma=1.128119 ! Fit after self-cal, rms=0.089754Jy sigma=1.124897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273225 Jy ! Component: 100 - total flux cleaned = -3.8768e-05 Jy ! Component: 150 - total flux cleaned = -3.86713e-05 Jy ! Component: 200 - total flux cleaned = 6.10894e-05 Jy ! Total flux subtracted in 200 components = 6.10894e-05 Jy ! Clean residual min=-0.015379 max=0.015628 Jy/beam ! Clean residual mean=0.000011 rms=0.004915 Jy/beam ! Combined flux in latest and established models = 0.584131 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.584131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089550Jy sigma=1.126870 ! Fit after self-cal, rms=0.089545Jy sigma=1.123778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.92 mas, bmaj=2.648 mas, bpa=2.611 degrees ! Estimated noise=0.411527 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.92 x 2.648 at 2.611 degrees (North through East) ! Clean map min=-0.012259 max=0.35097 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6845 mas, bmaj=2.165 mas, bpa=4.004 degrees ! Estimated noise=0.624638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.308337 Jy ! Component: 100 - total flux cleaned = 0.405402 Jy ! Component: 150 - total flux cleaned = 0.462252 Jy ! Component: 200 - total flux cleaned = 0.499284 Jy ! Total flux subtracted in 200 components = 0.499284 Jy ! Clean residual min=-0.022271 max=0.020934 Jy/beam ! Clean residual mean=-0.000030 rms=0.003960 Jy/beam ! Combined flux in latest and established models = 0.499284 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.499284 Jy ! Inverting map and beam ! Estimated beam: bmin=0.92 mas, bmaj=2.648 mas, bpa=2.611 degrees ! Estimated noise=0.411527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380955 Jy ! Component: 100 - total flux cleaned = 0.0595722 Jy ! Component: 150 - total flux cleaned = 0.0722924 Jy ! Component: 200 - total flux cleaned = 0.0792109 Jy ! Total flux subtracted in 200 components = 0.0792109 Jy ! Clean residual min=-0.013793 max=0.014072 Jy/beam ! Clean residual mean=-0.000003 rms=0.003310 Jy/beam ! Combined flux in latest and established models = 0.578495 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 62 components and 0.578495 Jy ! Inverting map ! Added new window around map position (-3, -15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121544 Jy ! Component: 100 - total flux cleaned = 0.0153534 Jy ! Component: 150 - total flux cleaned = 0.0164975 Jy ! Component: 200 - total flux cleaned = 0.0171727 Jy ! Total flux subtracted in 200 components = 0.0171727 Jy ! Clean residual min=-0.013261 max=0.011353 Jy/beam ! Clean residual mean=-0.000010 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.595668 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 0.595668 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=6.487 mas, bpa=1.249 degrees ! Estimated noise=0.520431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212335 Jy ! Component: 100 - total flux cleaned = 0.00240865 Jy ! Component: 150 - total flux cleaned = 0.00254232 Jy ! Component: 200 - total flux cleaned = 0.00254148 Jy ! Total flux subtracted in 200 components = 0.00254148 Jy ! Clean residual min=-0.015663 max=0.014701 Jy/beam ! Clean residual mean=-0.000014 rms=0.004713 Jy/beam ! Combined flux in latest and established models = 0.59821 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105981 Jy ! Component: 100 - total flux cleaned = -0.00020518 Jy ! Component: 150 - total flux cleaned = -0.000495438 Jy ! Component: 200 - total flux cleaned = -0.000585261 Jy ! Total flux subtracted in 200 components = -0.000585261 Jy ! Clean residual min=-0.015660 max=0.014490 Jy/beam ! Clean residual mean=-0.000013 rms=0.004677 Jy/beam ! Combined flux in latest and established models = 0.597624 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 0.597624 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.92 mas, bmaj=2.648 mas, bpa=2.611 degrees ! Estimated noise=0.411527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629537 Jy ! Component: 100 - total flux cleaned = 0.000464141 Jy ! Component: 150 - total flux cleaned = 0.000463934 Jy ! Component: 200 - total flux cleaned = 0.000207371 Jy ! Total flux subtracted in 200 components = 0.000207371 Jy ! Clean residual min=-0.012340 max=0.011034 Jy/beam ! Clean residual mean=-0.000006 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.597832 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.597832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.087355Jy sigma=1.089414 ! Fit after self-cal, rms=0.087154Jy sigma=1.081266 wmodel /J2005-3723_X_map.mod ! wmodel: Unable to open new model file: /J2005-3723_X_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap .//J2005-3723_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.92 x 2.648 at 2.611 degrees (North through East) ! Clean map min=-0.010972 max=0.34637 Jy/beam ! Writing clean map to FITS file: .//J2005-3723_X_map.fits wmodel .//J2005-3723_X_map.mod ! Writing 116 model components to file: .//J2005-3723_X_map.mod wobs .//J2005-3723_X_uvs.fits ! Writing UV FITS file: .//J2005-3723_X_uvs.fits wwins .//J2005-3723_X_map.win ! wwins: Wrote 5 windows to .//J2005-3723_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.346372 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0028916 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.50447 2.50447 5.00895 10.0179 20.0358 40.0716 80.1432 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0086 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.346 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 119.785 quit ! Quitting program ! Log file .//J2005-3723_X_dfm.log closed on Wed Nov 16 12:08:30 2016