! Started logfile: .//J2005+7752_X_dfm.log on Wed Nov 16 12:08:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J2005+7752_X_uva.fits
! Reading UV FITS file: .//J2005+7752_X_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.952632 visibilities/baseline/integration-bin.
! Found source: J2005+7752
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 13032 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2005+7752_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.138561Jy  sigma=34.183911
! Fit after  self-cal, rms=0.496690Jy  sigma=14.630968
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7373 mas, bmaj=1.494 mas, bpa=12.44 degrees
! Estimated noise=0.34497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.372488 Jy
! Component: 100  -  total flux cleaned = 0.464688 Jy
! Total flux subtracted in 100 components = 0.464688 Jy
! Clean residual min=-0.020560 max=0.057567 Jy/beam
! Clean residual mean=0.000134 rms=0.004805 Jy/beam
! Combined flux in latest and established models = 0.464688 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.464688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.163844Jy  sigma=4.666118
! Fit after  self-cal, rms=0.163526Jy  sigma=4.659242
! Inverting map 
! Added new window around map position (-1.4, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0600548 Jy
! Component: 100  -  total flux cleaned = 0.098865 Jy
! Total flux subtracted in 100 components = 0.098865 Jy
! Clean residual min=-0.014394 max=0.022762 Jy/beam
! Clean residual mean=0.000098 rms=0.003054 Jy/beam
! Combined flux in latest and established models = 0.563553 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.563553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.115488Jy  sigma=3.072630
! Fit after  self-cal, rms=0.113276Jy  sigma=3.001412
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0324677 Jy
! Component: 100  -  total flux cleaned = 0.0545575 Jy
! Total flux subtracted in 100 components = 0.0545575 Jy
! Clean residual min=-0.010193 max=0.014430 Jy/beam
! Clean residual mean=0.000078 rms=0.002072 Jy/beam
! Combined flux in latest and established models = 0.61811 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.61811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093018Jy  sigma=2.289222
! Fit after  self-cal, rms=0.092322Jy  sigma=2.265345
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180666 Jy
! Component: 100  -  total flux cleaned = 0.0308326 Jy
! Total flux subtracted in 100 components = 0.0308326 Jy
! Clean residual min=-0.008586 max=0.011427 Jy/beam
! Clean residual mean=0.000067 rms=0.001681 Jy/beam
! Combined flux in latest and established models = 0.648943 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.648943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084375Jy  sigma=1.975146
! Fit after  self-cal, rms=0.084135Jy  sigma=1.966609
! Inverting map 
! Added new window around map position (2.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119551 Jy
! Component: 100  -  total flux cleaned = 0.0212928 Jy
! Total flux subtracted in 100 components = 0.0212928 Jy
! Clean residual min=-0.007514 max=0.008786 Jy/beam
! Clean residual mean=0.000058 rms=0.001479 Jy/beam
! Combined flux in latest and established models = 0.670235 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 30 components and 0.670235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080521Jy  sigma=1.842060
! Fit after  self-cal, rms=0.080501Jy  sigma=1.841274
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9812 mas, bmaj=1.863 mas, bpa=11.05 degrees
! Estimated noise=0.212021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163579 Jy
! Component: 100  -  total flux cleaned = 0.0280196 Jy
! Component: 150  -  total flux cleaned = 0.0371786 Jy
! Component: 200  -  total flux cleaned = 0.0446207 Jy
! Total flux subtracted in 200 components = 0.0446207 Jy
! Clean residual min=-0.006618 max=0.009812 Jy/beam
! Clean residual mean=0.000090 rms=0.001760 Jy/beam
! Combined flux in latest and established models = 0.714856 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 54 components and 0.714856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075658Jy  sigma=1.662023
! Fit after  self-cal, rms=0.075527Jy  sigma=1.656443
! Inverting map 
! Added new window around map position (8.8, -15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094259 Jy
! Component: 100  -  total flux cleaned = 0.0155046 Jy
! Component: 150  -  total flux cleaned = 0.0204092 Jy
! Component: 200  -  total flux cleaned = 0.0243524 Jy
! Total flux subtracted in 200 components = 0.0243524 Jy
! Clean residual min=-0.005738 max=0.008901 Jy/beam
! Clean residual mean=0.000079 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.739209 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 76 components and 0.739209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073962Jy  sigma=1.595986
! Fit after  self-cal, rms=0.073855Jy  sigma=1.591240
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9812 x 1.863 at 11.05 degrees (North through East)
! Clean map  min=-0.0055693  max=0.50993 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.02     KP        1.05     
!   LA        0.97     MK        0.98     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.00     KP        1.04     
!   LA        0.97     MK        0.99     NL        1.03     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.00     KP        1.04     
!   LA        0.96     MK        0.98     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.01     KP        1.04     
!   LA        0.96     MK        0.99     NL        1.03     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.00     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.02     KP        1.05     
!   LA        0.97     MK        1.02     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.02     KP        1.05     
!   LA        0.96     MK        1.02     NL        1.03     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.02     KP        1.05     
!   LA        0.97     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.073855Jy  sigma=1.591240
! Fit after  self-cal, rms=0.069867Jy  sigma=1.451070
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9834 mas, bmaj=1.867 mas, bpa=11.13 degrees
! Estimated noise=0.211439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.6614e-05 Jy
! Component: 100  -  total flux cleaned = -0.00146542 Jy
! Component: 150  -  total flux cleaned = -0.0025148 Jy
! Component: 200  -  total flux cleaned = -0.00354524 Jy
! Total flux subtracted in 200 components = -0.00354524 Jy
! Clean residual min=-0.003219 max=0.002774 Jy/beam
! Clean residual mean=0.000032 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.735663 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 108 components and 0.735663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069456Jy  sigma=1.434858
! Fit after  self-cal, rms=0.069437Jy  sigma=1.434301
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069437Jy  sigma=1.434301
! Fit after  self-cal, rms=0.069238Jy  sigma=1.423167
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9829 mas, bmaj=1.868 mas, bpa=11.18 degrees
! Estimated noise=0.211039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00314551 Jy
! Component: 100  -  total flux cleaned = -0.00432977 Jy
! Component: 150  -  total flux cleaned = -0.00508809 Jy
! Component: 200  -  total flux cleaned = -0.00568405 Jy
! Total flux subtracted in 200 components = -0.00568405 Jy
! Clean residual min=-0.002461 max=0.002205 Jy/beam
! Clean residual mean=0.000014 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.729979 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 126 components and 0.729979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069026Jy  sigma=1.414563
! Fit after  self-cal, rms=0.069021Jy  sigma=1.414394
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000706889 Jy
! Component: 100  -  total flux cleaned = -0.00109689 Jy
! Component: 150  -  total flux cleaned = -0.00140417 Jy
! Component: 200  -  total flux cleaned = -0.0017367 Jy
! Total flux subtracted in 200 components = -0.0017367 Jy
! Clean residual min=-0.002329 max=0.002058 Jy/beam
! Clean residual mean=0.000015 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.728243 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 142 components and 0.728243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068936Jy  sigma=1.411562
! Fit after  self-cal, rms=0.068934Jy  sigma=1.411459
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068934Jy  sigma=1.411459
! Fit after  self-cal, rms=0.068829Jy  sigma=1.409083
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.983 mas, bmaj=1.869 mas, bpa=11.24 degrees
! Estimated noise=0.210506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00220213 Jy
! Component: 100  -  total flux cleaned = -0.00353108 Jy
! Component: 150  -  total flux cleaned = -0.00418453 Jy
! Component: 200  -  total flux cleaned = -0.00458746 Jy
! Total flux subtracted in 200 components = -0.00458746 Jy
! Clean residual min=-0.002098 max=0.001899 Jy/beam
! Clean residual mean=0.000011 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.723655 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 154 components and 0.723655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068718Jy  sigma=1.405461
! Fit after  self-cal, rms=0.068714Jy  sigma=1.405319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000620132 Jy
! Component: 100  -  total flux cleaned = -0.000899451 Jy
! Component: 150  -  total flux cleaned = -0.00112105 Jy
! Component: 200  -  total flux cleaned = -0.00129648 Jy
! Total flux subtracted in 200 components = -0.00129648 Jy
! Clean residual min=-0.002062 max=0.001734 Jy/beam
! Clean residual mean=0.000012 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.722359 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 170 components and 0.722359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068659Jy  sigma=1.404075
! Fit after  self-cal, rms=0.068658Jy  sigma=1.404013
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068658Jy  sigma=1.404013
! Fit after  self-cal, rms=0.068563Jy  sigma=1.402253
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.137 mas, bmaj=2.975 mas, bpa=9.37 degrees
! Estimated noise=0.263762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00257752 Jy
! Component: 100  -  total flux cleaned = -0.00369175 Jy
! Component: 150  -  total flux cleaned = -0.00417062 Jy
! Component: 200  -  total flux cleaned = -0.00460909 Jy
! Total flux subtracted in 200 components = -0.00460909 Jy
! Clean residual min=-0.002781 max=0.002087 Jy/beam
! Clean residual mean=0.000023 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.71775 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 195 components and 0.71775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068474Jy  sigma=1.401001
! Fit after  self-cal, rms=0.068468Jy  sigma=1.400723
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000542849 Jy
! Component: 100  -  total flux cleaned = -0.000866245 Jy
! Component: 150  -  total flux cleaned = -0.00108487 Jy
! Component: 200  -  total flux cleaned = -0.00127943 Jy
! Total flux subtracted in 200 components = -0.00127943 Jy
! Clean residual min=-0.002641 max=0.001941 Jy/beam
! Clean residual mean=0.000023 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.71647 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 217 components and 0.71647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068448Jy  sigma=1.400513
! Fit after  self-cal, rms=0.068446Jy  sigma=1.400431
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9833 mas, bmaj=1.869 mas, bpa=11.29 degrees
! Estimated noise=0.210008 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9833 x 1.869 at 11.29 degrees (North through East)
! Clean map  min=-0.0017848  max=0.50678 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068446Jy  sigma=1.400431
! Fit after  self-cal, rms=0.066723Jy  sigma=1.337489
! Inverting map and beam 
! Estimated beam: bmin=0.9841 mas, bmaj=1.867 mas, bpa=11.03 degrees
! Estimated noise=0.207226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00546853 Jy
! Component: 100  -  total flux cleaned = -0.00777824 Jy
! Component: 150  -  total flux cleaned = -0.0086683 Jy
! Component: 200  -  total flux cleaned = -0.00917427 Jy
! Total flux subtracted in 200 components = -0.00917427 Jy
! Clean residual min=-0.002694 max=0.002222 Jy/beam
! Clean residual mean=0.000021 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.707296 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 233 components and 0.707296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065855Jy  sigma=1.327358
! Fit after  self-cal, rms=0.065850Jy  sigma=1.327130
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0007291 Jy
! Component: 100  -  total flux cleaned = -0.00124199 Jy
! Component: 150  -  total flux cleaned = -0.00147122 Jy
! Component: 200  -  total flux cleaned = -0.0016373 Jy
! Total flux subtracted in 200 components = -0.0016373 Jy
! Clean residual min=-0.002396 max=0.002196 Jy/beam
! Clean residual mean=0.000022 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.705659 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 242 components and 0.705659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065718Jy  sigma=1.325906
! Fit after  self-cal, rms=0.065716Jy  sigma=1.325779
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065716Jy  sigma=1.325779
! Fit after  self-cal, rms=0.065305Jy  sigma=1.311498
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7386 mas, bmaj=1.496 mas, bpa=12.29 degrees
! Estimated noise=0.33477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.360744 Jy
! Component: 100  -  total flux cleaned = 0.45982 Jy
! Component: 150  -  total flux cleaned = 0.520319 Jy
! Component: 200  -  total flux cleaned = 0.56155 Jy
! Total flux subtracted in 200 components = 0.56155 Jy
! Clean residual min=-0.008519 max=0.022571 Jy/beam
! Clean residual mean=0.000068 rms=0.002308 Jy/beam
! Combined flux in latest and established models = 0.56155 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.56155 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9844 mas, bmaj=1.867 mas, bpa=10.91 degrees
! Estimated noise=0.205023 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0479491 Jy
! Component: 100  -  total flux cleaned = 0.0728908 Jy
! Component: 150  -  total flux cleaned = 0.0872604 Jy
! Component: 200  -  total flux cleaned = 0.0972982 Jy
! Total flux subtracted in 200 components = 0.0972982 Jy
! Clean residual min=-0.003512 max=0.006853 Jy/beam
! Clean residual mean=0.000059 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.658848 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.658848 Jy
! Inverting map 
! Added new window around map position (1.2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00809251 Jy
! Component: 100  -  total flux cleaned = 0.0144623 Jy
! Component: 150  -  total flux cleaned = 0.0196292 Jy
! Component: 200  -  total flux cleaned = 0.0238491 Jy
! Total flux subtracted in 200 components = 0.0238491 Jy
! Clean residual min=-0.002578 max=0.003264 Jy/beam
! Clean residual mean=0.000034 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.682697 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 57 components and 0.682697 Jy
! Inverting map 
! Added new window around map position (-46, -19.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00364307 Jy
! Component: 100  -  total flux cleaned = 0.00660009 Jy
! Component: 150  -  total flux cleaned = 0.00892365 Jy
! Component: 200  -  total flux cleaned = 0.0105823 Jy
! Total flux subtracted in 200 components = 0.0105823 Jy
! Clean residual min=-0.002538 max=0.002816 Jy/beam
! Clean residual mean=0.000024 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.69328 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 87 components and 0.69328 Jy
! Inverting map 
! Added new window around map position (8, 35.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237327 Jy
! Component: 100  -  total flux cleaned = 0.00312867 Jy
! Component: 150  -  total flux cleaned = 0.0036736 Jy
! Component: 200  -  total flux cleaned = 0.00399054 Jy
! Total flux subtracted in 200 components = 0.00399054 Jy
! Clean residual min=-0.002358 max=0.002628 Jy/beam
! Clean residual mean=0.000021 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.69727 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 118 components and 0.69727 Jy
! Inverting map 
! Added new window around map position (-8, -35.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180453 Jy
! Component: 100  -  total flux cleaned = 0.00241688 Jy
! Component: 150  -  total flux cleaned = 0.00269838 Jy
! Component: 200  -  total flux cleaned = 0.00285773 Jy
! Total flux subtracted in 200 components = 0.00285773 Jy
! Clean residual min=-0.002219 max=0.002420 Jy/beam
! Clean residual mean=0.000020 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.700128 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 149 components and 0.700128 Jy
! Inverting map 
! Added new window around map position (5.2, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011056 Jy
! Component: 100  -  total flux cleaned = 0.00109893 Jy
! Component: 150  -  total flux cleaned = 0.00141175 Jy
! Component: 200  -  total flux cleaned = 0.00170178 Jy
! Total flux subtracted in 200 components = 0.00170178 Jy
! Clean residual min=-0.002041 max=0.002070 Jy/beam
! Clean residual mean=0.000018 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.70183 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 178 components and 0.70183 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=2.971 mas, bpa=8.814 degrees
! Estimated noise=0.257733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145883 Jy
! Component: 100  -  total flux cleaned = 0.0017627 Jy
! Component: 150  -  total flux cleaned = 0.00198173 Jy
! Component: 200  -  total flux cleaned = 0.00222635 Jy
! Total flux subtracted in 200 components = 0.00222635 Jy
! Clean residual min=-0.002612 max=0.002581 Jy/beam
! Clean residual mean=0.000036 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.704056 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132907 Jy
! Component: 100  -  total flux cleaned = 0.00021564 Jy
! Component: 150  -  total flux cleaned = 0.000333031 Jy
! Component: 200  -  total flux cleaned = 0.000442744 Jy
! Total flux subtracted in 200 components = 0.000442744 Jy
! Clean residual min=-0.002561 max=0.002469 Jy/beam
! Clean residual mean=0.000035 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.704499 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 224 components and 0.704499 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9844 mas, bmaj=1.867 mas, bpa=10.91 degrees
! Estimated noise=0.205023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157839 Jy
! Component: 100  -  total flux cleaned = -0.000371857 Jy
! Component: 150  -  total flux cleaned = -0.000491909 Jy
! Component: 200  -  total flux cleaned = -0.000528913 Jy
! Total flux subtracted in 200 components = -0.000528913 Jy
! Clean residual min=-0.001933 max=0.001891 Jy/beam
! Clean residual mean=0.000016 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.70397 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 243 components and 0.70397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063984Jy  sigma=1.297444
! Fit after  self-cal, rms=0.063961Jy  sigma=1.296505
wmodel /J2005+7752_X_map.mod
! wmodel: Unable to open new model file: /J2005+7752_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J2005+7752_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9844 x 1.867 at 10.91 degrees (North through East)
! Clean map  min=-0.0018465  max=0.49499 Jy/beam
! Writing clean map to FITS file: .//J2005+7752_X_map.fits
wmodel .//J2005+7752_X_map.mod
! Writing 243 model components to file: .//J2005+7752_X_map.mod
wobs   .//J2005+7752_X_uvs.fits
! Writing UV FITS file: .//J2005+7752_X_uvs.fits
wwins  .//J2005+7752_X_map.win
! wwins: Wrote 11 windows to .//J2005+7752_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.494988 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000472436 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.286332 0.286332 0.572663 1.14533 2.29065 4.58131 9.16261 18.3252 36.6505 73.3009
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.494 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1047.74 
quit
! Quitting program
! Log file .//J2005+7752_X_dfm.log closed on Wed Nov 16 12:08:26 2016