! Started logfile: .//J1924-2914_X_dfm.log on Wed Nov 16 12:07:25 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1924-2914_X_uvm.fits
! Reading UV FITS file: .//J1924-2914_X_uvm.fits
! AN table 1: 94 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.625059 visibilities/baseline/integration-bin.
! Found source: J1924-2914
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 21152 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1924-2914_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 293 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=4.984786Jy  sigma=125.514589
! Fit after  self-cal, rms=3.933367Jy  sigma=100.308085
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6836 mas, bmaj=1.887 mas, bpa=-1.541 degrees
! Estimated noise=0.405172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.84214 Jy
! Component: 100  -  total flux cleaned = 4.68002 Jy
! Total flux subtracted in 100 components = 4.68002 Jy
! Clean residual min=-0.197879 max=0.363708 Jy/beam
! Clean residual mean=0.000329 rms=0.041680 Jy/beam
! Combined flux in latest and established models = 4.68002 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 4.68002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.843049Jy  sigma=20.332821
! Fit after  self-cal, rms=0.843072Jy  sigma=20.332578
! Inverting map 
! Added new window around map position (-1, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.329009 Jy
! Component: 100  -  total flux cleaned = 0.458183 Jy
! Total flux subtracted in 100 components = 0.458183 Jy
! Clean residual min=-0.187638 max=0.247633 Jy/beam
! Clean residual mean=0.000210 rms=0.032523 Jy/beam
! Combined flux in latest and established models = 5.1382 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 5.1382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.728436Jy  sigma=16.673223
! Fit after  self-cal, rms=0.712774Jy  sigma=16.147648
! Inverting map 
! Added new window around map position (1.6, 6.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207094 Jy
! Component: 100  -  total flux cleaned = 0.30145 Jy
! Total flux subtracted in 100 components = 0.30145 Jy
! Clean residual min=-0.167049 max=0.145387 Jy/beam
! Clean residual mean=0.000135 rms=0.027543 Jy/beam
! Combined flux in latest and established models = 5.43965 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 24 components and 5.43965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.653761Jy  sigma=14.320270
! Fit after  self-cal, rms=0.648022Jy  sigma=14.192814
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8984 mas, bmaj=2.379 mas, bpa=-2.097 degrees
! Estimated noise=0.208079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113706 Jy
! Component: 100  -  total flux cleaned = 0.135228 Jy
! Component: 150  -  total flux cleaned = 0.152755 Jy
! Component: 200  -  total flux cleaned = 0.162608 Jy
! Total flux subtracted in 200 components = 0.162608 Jy
! Clean residual min=-0.140740 max=0.133938 Jy/beam
! Clean residual mean=-0.000111 rms=0.027147 Jy/beam
! Combined flux in latest and established models = 5.60226 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 35 components and 5.60226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.623016Jy  sigma=13.537607
! Fit after  self-cal, rms=0.620987Jy  sigma=13.491982
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8984 x 2.379 at -2.097 degrees (North through East)
! Clean map  min=-0.13295  max=4.6967 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        1.14     KP        1.06     
!   LA        0.97     MK        0.98     NL        1.04     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        1.15     KP        1.06     
!   LA        0.96     MK        0.97     NL        1.03     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        1.13     KP        1.06     
!   LA        0.98     MK        0.97     NL        1.02     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.93     HN        1.14     KP        1.06     
!   LA        0.97     MK        1.01     NL        1.03     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.92     HN        1.16     KP        1.05     
!   LA        0.97     MK        0.99     NL        1.04     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.92     HN        1.14     KP        1.05     
!   LA        0.97     MK        1.01     NL        1.06     OV        0.97     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.92     HN        1.19     KP        1.05     
!   LA        0.97     MK        1.02     NL        1.06     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.92     HN        1.19     KP        1.05     
!   LA        0.97     MK        1.03     NL        1.04     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.620987Jy  sigma=13.491982
! Fit after  self-cal, rms=0.501850Jy  sigma=10.870103
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9018 mas, bmaj=2.383 mas, bpa=-2.123 degrees
! Estimated noise=0.210177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0564131 Jy
! Component: 100  -  total flux cleaned = -0.069934 Jy
! Component: 150  -  total flux cleaned = -0.0727238 Jy
! Component: 200  -  total flux cleaned = -0.0750902 Jy
! Total flux subtracted in 200 components = -0.0750902 Jy
! Clean residual min=-0.064005 max=0.077620 Jy/beam
! Clean residual mean=-0.000057 rms=0.014890 Jy/beam
! Combined flux in latest and established models = 5.52717 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 5.52717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.488685Jy  sigma=10.640150
! Fit after  self-cal, rms=0.487017Jy  sigma=10.629104
! Inverting map 
! Added new window around map position (-5, 20.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0723559 Jy
! Component: 100  -  total flux cleaned = 0.0899434 Jy
! Component: 150  -  total flux cleaned = 0.09003 Jy
! Component: 200  -  total flux cleaned = 0.0900933 Jy
! Total flux subtracted in 200 components = 0.0900933 Jy
! Clean residual min=-0.055330 max=0.066972 Jy/beam
! Clean residual mean=-0.000033 rms=0.013408 Jy/beam
! Combined flux in latest and established models = 5.61726 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 69 components and 5.61726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.472015Jy  sigma=10.334549
! Fit after  self-cal, rms=0.470824Jy  sigma=10.310103
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.470824Jy  sigma=10.310103
! Fit after  self-cal, rms=0.283897Jy  sigma=5.855618
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9026 mas, bmaj=2.385 mas, bpa=-1.852 degrees
! Estimated noise=0.210266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.033963 Jy
! Component: 100  -  total flux cleaned = -0.0437947 Jy
! Component: 150  -  total flux cleaned = -0.0504743 Jy
! Component: 200  -  total flux cleaned = -0.0573871 Jy
! Total flux subtracted in 200 components = -0.0573871 Jy
! Clean residual min=-0.060038 max=0.061915 Jy/beam
! Clean residual mean=-0.000026 rms=0.011883 Jy/beam
! Combined flux in latest and established models = 5.55988 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 86 components and 5.55988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.263014Jy  sigma=5.395981
! Fit after  self-cal, rms=0.259674Jy  sigma=5.352669
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0418287 Jy
! Component: 100  -  total flux cleaned = 0.0515798 Jy
! Component: 150  -  total flux cleaned = 0.0515536 Jy
! Component: 200  -  total flux cleaned = 0.0534662 Jy
! Total flux subtracted in 200 components = 0.0534662 Jy
! Clean residual min=-0.056028 max=0.055291 Jy/beam
! Clean residual mean=-0.000012 rms=0.010539 Jy/beam
! Combined flux in latest and established models = 5.61334 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 107 components and 5.61335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.247189Jy  sigma=4.959432
! Fit after  self-cal, rms=0.246388Jy  sigma=4.945357
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.246388Jy  sigma=4.945357
! Fit after  self-cal, rms=0.192996Jy  sigma=3.695542
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9031 mas, bmaj=2.384 mas, bpa=-1.88 degrees
! Estimated noise=0.210129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0163125 Jy
! Component: 100  -  total flux cleaned = -0.0267142 Jy
! Component: 150  -  total flux cleaned = -0.0302054 Jy
! Component: 200  -  total flux cleaned = -0.0332985 Jy
! Total flux subtracted in 200 components = -0.0332985 Jy
! Clean residual min=-0.038824 max=0.044209 Jy/beam
! Clean residual mean=-0.000019 rms=0.008072 Jy/beam
! Combined flux in latest and established models = 5.58005 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 120 components and 5.58005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.181832Jy  sigma=3.447908
! Fit after  self-cal, rms=0.180165Jy  sigma=3.439738
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0354804 Jy
! Component: 100  -  total flux cleaned = 0.0296485 Jy
! Component: 150  -  total flux cleaned = 0.0244523 Jy
! Component: 200  -  total flux cleaned = 0.021289 Jy
! Total flux subtracted in 200 components = 0.021289 Jy
! Clean residual min=-0.036710 max=0.033243 Jy/beam
! Clean residual mean=-0.000010 rms=0.007199 Jy/beam
! Combined flux in latest and established models = 5.60133 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 5.60133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.164525Jy  sigma=3.130772
! Fit after  self-cal, rms=0.162291Jy  sigma=3.095787
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.162291Jy  sigma=3.095787
! Fit after  self-cal, rms=0.161283Jy  sigma=3.070524
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.362 mas, bmaj=5.982 mas, bpa=3.054 degrees
! Estimated noise=0.258855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00652375 Jy
! Component: 100  -  total flux cleaned = 0.00111667 Jy
! Component: 150  -  total flux cleaned = -0.00197457 Jy
! Component: 200  -  total flux cleaned = -0.00267768 Jy
! Total flux subtracted in 200 components = -0.00267768 Jy
! Clean residual min=-0.036694 max=0.048709 Jy/beam
! Clean residual mean=-0.000020 rms=0.009770 Jy/beam
! Combined flux in latest and established models = 5.59866 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 161 components and 5.59866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.154380Jy  sigma=3.006282
! Fit after  self-cal, rms=0.153467Jy  sigma=2.993669
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0434141 Jy
! Component: 100  -  total flux cleaned = 0.0600235 Jy
! Component: 150  -  total flux cleaned = 0.0711003 Jy
! Component: 200  -  total flux cleaned = 0.083492 Jy
! Total flux subtracted in 200 components = 0.083492 Jy
! Clean residual min=-0.030153 max=0.026672 Jy/beam
! Clean residual mean=0.000000 rms=0.007309 Jy/beam
! Combined flux in latest and established models = 5.68215 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 205 components and 5.68215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.144350Jy  sigma=2.731497
! Fit after  self-cal, rms=0.143732Jy  sigma=2.715650
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9028 mas, bmaj=2.382 mas, bpa=-1.86 degrees
! Estimated noise=0.20988 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9028 x 2.382 at -1.86 degrees (North through East)
! Clean map  min=-0.066906  max=4.7497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.143732Jy  sigma=2.715650
! Fit after  self-cal, rms=0.138196Jy  sigma=2.538719
! Inverting map and beam 
! Estimated beam: bmin=0.9034 mas, bmaj=2.383 mas, bpa=-1.848 degrees
! Estimated noise=0.210012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00930681 Jy
! Component: 100  -  total flux cleaned = 0.0162064 Jy
! Component: 150  -  total flux cleaned = 0.0182855 Jy
! Component: 200  -  total flux cleaned = 0.0189558 Jy
! Total flux subtracted in 200 components = 0.0189558 Jy
! Clean residual min=-0.030909 max=0.023030 Jy/beam
! Clean residual mean=-0.000006 rms=0.005038 Jy/beam
! Combined flux in latest and established models = 5.70111 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 231 components and 5.70111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.128592Jy  sigma=2.343118
! Fit after  self-cal, rms=0.127554Jy  sigma=2.331296
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536353 Jy
! Component: 100  -  total flux cleaned = 0.00713433 Jy
! Component: 150  -  total flux cleaned = 0.00932681 Jy
! Component: 200  -  total flux cleaned = 0.0108601 Jy
! Total flux subtracted in 200 components = 0.0108601 Jy
! Clean residual min=-0.029441 max=0.021734 Jy/beam
! Clean residual mean=-0.000003 rms=0.004755 Jy/beam
! Combined flux in latest and established models = 5.71197 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 246 components and 5.71197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.121332Jy  sigma=2.219282
! Fit after  self-cal, rms=0.120605Jy  sigma=2.212763
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.120605Jy  sigma=2.212763
! Fit after  self-cal, rms=0.119793Jy  sigma=2.190471
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6847 mas, bmaj=1.888 mas, bpa=-1.145 degrees
! Estimated noise=0.409381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.86438 Jy
! Component: 100  -  total flux cleaned = 4.72396 Jy
! Component: 150  -  total flux cleaned = 5.02076 Jy
! Component: 200  -  total flux cleaned = 5.19717 Jy
! Total flux subtracted in 200 components = 5.19717 Jy
! Clean residual min=-0.087117 max=0.096290 Jy/beam
! Clean residual mean=0.000064 rms=0.016108 Jy/beam
! Combined flux in latest and established models = 5.19718 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 5.19718 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9034 mas, bmaj=2.383 mas, bpa=-1.843 degrees
! Estimated noise=0.209937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142479 Jy
! Component: 100  -  total flux cleaned = 0.226885 Jy
! Component: 150  -  total flux cleaned = 0.288164 Jy
! Component: 200  -  total flux cleaned = 0.316554 Jy
! Total flux subtracted in 200 components = 0.316554 Jy
! Clean residual min=-0.041172 max=0.049013 Jy/beam
! Clean residual mean=-0.000035 rms=0.009151 Jy/beam
! Combined flux in latest and established models = 5.51373 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 67 components and 5.51373 Jy
! Inverting map 
! Added new window around map position (3.4, 7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0387015 Jy
! Component: 100  -  total flux cleaned = 0.0627482 Jy
! Component: 150  -  total flux cleaned = 0.0814318 Jy
! Component: 200  -  total flux cleaned = 0.0996933 Jy
! Total flux subtracted in 200 components = 0.0996933 Jy
! Clean residual min=-0.033736 max=0.032380 Jy/beam
! Clean residual mean=-0.000025 rms=0.007045 Jy/beam
! Combined flux in latest and established models = 5.61343 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 95 components and 5.61343 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.363 mas, bmaj=5.986 mas, bpa=3.055 degrees
! Estimated noise=0.258711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0391563 Jy
! Component: 100  -  total flux cleaned = 0.0690576 Jy
! Component: 150  -  total flux cleaned = 0.0843498 Jy
! Component: 200  -  total flux cleaned = 0.0934954 Jy
! Total flux subtracted in 200 components = 0.0934954 Jy
! Clean residual min=-0.029330 max=0.024833 Jy/beam
! Clean residual mean=-0.000025 rms=0.007258 Jy/beam
! Combined flux in latest and established models = 5.70692 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668828 Jy
! Component: 100  -  total flux cleaned = 0.0128975 Jy
! Component: 150  -  total flux cleaned = 0.0186353 Jy
! Component: 200  -  total flux cleaned = 0.0245883 Jy
! Total flux subtracted in 200 components = 0.0245883 Jy
! Clean residual min=-0.027099 max=0.020669 Jy/beam
! Clean residual mean=-0.000017 rms=0.006256 Jy/beam
! Combined flux in latest and established models = 5.73151 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 141 components and 5.73151 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9034 mas, bmaj=2.383 mas, bpa=-1.843 degrees
! Estimated noise=0.209937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00799585 Jy
! Component: 100  -  total flux cleaned = -0.00710841 Jy
! Component: 150  -  total flux cleaned = -0.00543336 Jy
! Component: 200  -  total flux cleaned = -0.00152223 Jy
! Total flux subtracted in 200 components = -0.00152223 Jy
! Clean residual min=-0.029188 max=0.024578 Jy/beam
! Clean residual mean=-0.000009 rms=0.005106 Jy/beam
! Combined flux in latest and established models = 5.72999 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 170 components and 5.72999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.126069Jy  sigma=2.621890
! Fit after  self-cal, rms=0.120385Jy  sigma=2.485767
wmodel /J1924-2914_X_map.mod
! wmodel: Unable to open new model file: /J1924-2914_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1924-2914_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9034 x 2.383 at -1.843 degrees (North through East)
! Clean map  min=-0.027363  max=4.7407 Jy/beam
! Writing clean map to FITS file: .//J1924-2914_X_map.fits
wmodel .//J1924-2914_X_map.mod
! Writing 170 model components to file: .//J1924-2914_X_map.mod
wobs   .//J1924-2914_X_uvs.fits
! Writing UV FITS file: .//J1924-2914_X_uvs.fits
wwins  .//J1924-2914_X_map.win
! wwins: Wrote 8 windows to .//J1924-2914_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 4.74072 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.004888 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.30932 0.30932 0.618641 1.23728 2.47456 4.94913 9.89825 19.7965 39.593 79.186
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0146 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       4.74 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  969.867 
quit
! Quitting program
! Log file .//J1924-2914_X_dfm.log closed on Wed Nov 16 12:07:29 2016