! Started logfile: .//J1911-2006_X_dfm.log on Wed Nov 16 12:07:13 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1911-2006_X_uva.fits
! Reading UV FITS file: .//J1911-2006_X_uva.fits
! AN table 1: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.720307 visibilities/baseline/integration-bin.
! Found source: J1911-2006
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 6016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1911-2006_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.654631Jy  sigma=48.863909
! Fit after  self-cal, rms=0.273880Jy  sigma=8.157188
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.764 mas, bmaj=1.971 mas, bpa=8.761 degrees
! Estimated noise=0.569123 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.969529 Jy
! Component: 100  -  total flux cleaned = 1.18095 Jy
! Total flux subtracted in 100 components = 1.18095 Jy
! Clean residual min=-0.037632 max=0.063615 Jy/beam
! Clean residual mean=-0.000049 rms=0.010138 Jy/beam
! Combined flux in latest and established models = 1.18095 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.18095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.127371Jy  sigma=3.769112
! Fit after  self-cal, rms=0.127370Jy  sigma=3.769080
! Inverting map 
! Added new window around map position (-1.6, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0560189 Jy
! Component: 100  -  total flux cleaned = 0.0796313 Jy
! Total flux subtracted in 100 components = 0.0796313 Jy
! Clean residual min=-0.040356 max=0.046730 Jy/beam
! Clean residual mean=-0.000030 rms=0.008165 Jy/beam
! Combined flux in latest and established models = 1.26058 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 1.26058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.098521Jy  sigma=2.861907
! Fit after  self-cal, rms=0.096568Jy  sigma=2.798651
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9714 mas, bmaj=2.364 mas, bpa=6.255 degrees
! Estimated noise=0.317108 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246057 Jy
! Component: 100  -  total flux cleaned = 0.0379767 Jy
! Component: 150  -  total flux cleaned = 0.0422116 Jy
! Component: 200  -  total flux cleaned = 0.0431206 Jy
! Total flux subtracted in 200 components = 0.0431206 Jy
! Clean residual min=-0.040190 max=0.040875 Jy/beam
! Clean residual mean=-0.000055 rms=0.007582 Jy/beam
! Combined flux in latest and established models = 1.3037 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 1.3037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090946Jy  sigma=2.570423
! Fit after  self-cal, rms=0.090658Jy  sigma=2.559049
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9714 x 2.364 at 6.255 degrees (North through East)
! Clean map  min=-0.037823  max=1.2067 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     KP        0.99     LA        1.00     
!   MK        0.95     NL        1.05     OV        0.94     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     KP        0.99     LA        1.01     
!   MK        0.95     NL        1.07     OV        0.93     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     KP        0.99     LA        1.01     
!   MK        1.00     NL        1.05     OV        0.94     PT        0.99     
!   SC        0.95     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     KP        0.99     LA        1.00     
!   MK        0.97     NL        1.06     OV        0.95     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.95     KP        1.00     LA        1.01     
!   MK        1.01     NL        1.07     OV        0.94     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.95     KP        1.00     LA        1.01     
!   MK        1.03     NL        1.09     OV        0.94     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     KP        1.00     LA        1.00     
!   MK        1.05     NL        1.07     OV        0.95     PT        1.00     
!   SC        1.04     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.95     KP        0.99     LA        1.00     
!   MK        1.07     NL        1.08     OV        0.95     PT        0.99     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.090658Jy  sigma=2.559049
! Fit after  self-cal, rms=0.043659Jy  sigma=1.188279
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9851 mas, bmaj=2.376 mas, bpa=6.313 degrees
! Estimated noise=0.319558 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159489 Jy
! Component: 100  -  total flux cleaned = 0.0198803 Jy
! Component: 150  -  total flux cleaned = 0.0233951 Jy
! Component: 200  -  total flux cleaned = 0.0257035 Jy
! Total flux subtracted in 200 components = 0.0257035 Jy
! Clean residual min=-0.007446 max=0.009562 Jy/beam
! Clean residual mean=-0.000013 rms=0.002002 Jy/beam
! Combined flux in latest and established models = 1.3294 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 1.3294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033107Jy  sigma=0.871555
! Fit after  self-cal, rms=0.032496Jy  sigma=0.856522
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032496Jy  sigma=0.856522
! Fit after  self-cal, rms=0.032064Jy  sigma=0.848299
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9854 mas, bmaj=2.376 mas, bpa=6.364 degrees
! Estimated noise=0.319358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034253 Jy
! Component: 100  -  total flux cleaned = 0.00481782 Jy
! Component: 150  -  total flux cleaned = 0.0053953 Jy
! Component: 200  -  total flux cleaned = 0.00577022 Jy
! Total flux subtracted in 200 components = 0.00577022 Jy
! Clean residual min=-0.005695 max=0.009173 Jy/beam
! Clean residual mean=-0.000010 rms=0.001649 Jy/beam
! Combined flux in latest and established models = 1.33517 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 50 components and 1.33517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030060Jy  sigma=0.801083
! Fit after  self-cal, rms=0.029842Jy  sigma=0.796567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, 15.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00759214 Jy
! Component: 100  -  total flux cleaned = 0.00967064 Jy
! Component: 150  -  total flux cleaned = 0.0107106 Jy
! Component: 200  -  total flux cleaned = 0.0115208 Jy
! Total flux subtracted in 200 components = 0.0115208 Jy
! Clean residual min=-0.004866 max=0.005788 Jy/beam
! Clean residual mean=-0.000003 rms=0.001246 Jy/beam
! Combined flux in latest and established models = 1.3467 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 66 components and 1.3467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027423Jy  sigma=0.726538
! Fit after  self-cal, rms=0.027358Jy  sigma=0.725069
! Inverting map 
! Added new window around map position (0, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430308 Jy
! Component: 100  -  total flux cleaned = 0.00538023 Jy
! Component: 150  -  total flux cleaned = 0.00630034 Jy
! Component: 200  -  total flux cleaned = 0.00674611 Jy
! Total flux subtracted in 200 components = 0.00674611 Jy
! Clean residual min=-0.004099 max=0.003581 Jy/beam
! Clean residual mean=0.000001 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 1.35344 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 90 components and 1.35344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026089Jy  sigma=0.689562
! Fit after  self-cal, rms=0.025974Jy  sigma=0.688104
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025974Jy  sigma=0.688104
! Fit after  self-cal, rms=0.025840Jy  sigma=0.684951
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9853 mas, bmaj=2.375 mas, bpa=6.373 degrees
! Estimated noise=0.319278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246981 Jy
! Component: 100  -  total flux cleaned = 0.00336958 Jy
! Component: 150  -  total flux cleaned = 0.00373201 Jy
! Component: 200  -  total flux cleaned = 0.00412624 Jy
! Total flux subtracted in 200 components = 0.00412624 Jy
! Clean residual min=-0.003518 max=0.003142 Jy/beam
! Clean residual mean=0.000002 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 1.35757 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 104 components and 1.35757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025328Jy  sigma=0.672617
! Fit after  self-cal, rms=0.025271Jy  sigma=0.671694
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000272216 Jy
! Component: 100  -  total flux cleaned = 0.000570929 Jy
! Component: 150  -  total flux cleaned = 0.000627529 Jy
! Component: 200  -  total flux cleaned = 0.000729733 Jy
! Total flux subtracted in 200 components = 0.000729733 Jy
! Clean residual min=-0.003312 max=0.002882 Jy/beam
! Clean residual mean=0.000002 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 1.3583 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 113 components and 1.3583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025011Jy  sigma=0.665043
! Fit after  self-cal, rms=0.024981Jy  sigma=0.664608
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024981Jy  sigma=0.664608
! Fit after  self-cal, rms=0.024953Jy  sigma=0.663294
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.432 mas, bmaj=5.34 mas, bpa=16.75 degrees
! Estimated noise=0.390247 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146138 Jy
! Component: 100  -  total flux cleaned = 0.00189549 Jy
! Component: 150  -  total flux cleaned = 0.00211115 Jy
! Component: 200  -  total flux cleaned = 0.00230707 Jy
! Total flux subtracted in 200 components = 0.00230707 Jy
! Clean residual min=-0.003730 max=0.003458 Jy/beam
! Clean residual mean=0.000002 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 1.36061 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 122 components and 1.36061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024782Jy  sigma=0.659369
! Fit after  self-cal, rms=0.024746Jy  sigma=0.658624
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.73652e-07 Jy
! Component: 100  -  total flux cleaned = 0.000184938 Jy
! Component: 150  -  total flux cleaned = 0.000350956 Jy
! Component: 200  -  total flux cleaned = 0.000460861 Jy
! Total flux subtracted in 200 components = 0.000460861 Jy
! Clean residual min=-0.003585 max=0.003222 Jy/beam
! Clean residual mean=0.000002 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 1.36107 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 128 components and 1.36107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024697Jy  sigma=0.657458
! Fit after  self-cal, rms=0.024690Jy  sigma=0.657240
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9851 mas, bmaj=2.374 mas, bpa=6.376 degrees
! Estimated noise=0.319348 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9851 x 2.374 at 6.376 degrees (North through East)
! Clean map  min=-0.0042034  max=1.211 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024690Jy  sigma=0.657240
! Fit after  self-cal, rms=0.022155Jy  sigma=0.578585
! Inverting map and beam 
! Estimated beam: bmin=0.9852 mas, bmaj=2.374 mas, bpa=6.39 degrees
! Estimated noise=0.31944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018895 Jy
! Component: 100  -  total flux cleaned = 0.000292415 Jy
! Component: 150  -  total flux cleaned = 0.000294648 Jy
! Component: 200  -  total flux cleaned = 0.000212741 Jy
! Total flux subtracted in 200 components = 0.000212741 Jy
! Clean residual min=-0.003125 max=0.002494 Jy/beam
! Clean residual mean=0.000001 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 1.36128 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 149 components and 1.36128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021938Jy  sigma=0.573271
! Fit after  self-cal, rms=0.021934Jy  sigma=0.573152
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113997 Jy
! Component: 100  -  total flux cleaned = -0.000147714 Jy
! Component: 150  -  total flux cleaned = -0.000246628 Jy
! Component: 200  -  total flux cleaned = -0.000310577 Jy
! Total flux subtracted in 200 components = -0.000310577 Jy
! Clean residual min=-0.003090 max=0.002449 Jy/beam
! Clean residual mean=0.000001 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 1.36097 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 154 components and 1.36097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021821Jy  sigma=0.570614
! Fit after  self-cal, rms=0.021818Jy  sigma=0.570520
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021818Jy  sigma=0.570520
! Fit after  self-cal, rms=0.021810Jy  sigma=0.570149
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7726 mas, bmaj=1.972 mas, bpa=8.722 degrees
! Estimated noise=0.567048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.974412 Jy
! Component: 100  -  total flux cleaned = 1.18742 Jy
! Component: 150  -  total flux cleaned = 1.24072 Jy
! Component: 200  -  total flux cleaned = 1.26565 Jy
! Total flux subtracted in 200 components = 1.26565 Jy
! Clean residual min=-0.011958 max=0.014680 Jy/beam
! Clean residual mean=-0.000025 rms=0.002911 Jy/beam
! Combined flux in latest and established models = 1.26565 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.26565 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=2.374 mas, bpa=6.39 degrees
! Estimated noise=0.319455 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238938 Jy
! Component: 100  -  total flux cleaned = 0.0390563 Jy
! Component: 150  -  total flux cleaned = 0.0501943 Jy
! Component: 200  -  total flux cleaned = 0.0589447 Jy
! Total flux subtracted in 200 components = 0.0589447 Jy
! Clean residual min=-0.006609 max=0.006084 Jy/beam
! Clean residual mean=-0.000028 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 1.3246 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 48 components and 1.3246 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.431 mas, bmaj=5.339 mas, bpa=16.76 degrees
! Estimated noise=0.390428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00990122 Jy
! Component: 100  -  total flux cleaned = 0.016589 Jy
! Component: 150  -  total flux cleaned = 0.0214985 Jy
! Component: 200  -  total flux cleaned = 0.0251786 Jy
! Total flux subtracted in 200 components = 0.0251786 Jy
! Clean residual min=-0.004807 max=0.003604 Jy/beam
! Clean residual mean=-0.000014 rms=0.001142 Jy/beam
! Combined flux in latest and established models = 1.34978 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283164 Jy
! Component: 100  -  total flux cleaned = 0.00509256 Jy
! Component: 150  -  total flux cleaned = 0.00692386 Jy
! Component: 200  -  total flux cleaned = 0.00801799 Jy
! Total flux subtracted in 200 components = 0.00801799 Jy
! Clean residual min=-0.003965 max=0.002670 Jy/beam
! Clean residual mean=-0.000003 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 1.35779 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 106 components and 1.35779 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=2.374 mas, bpa=6.39 degrees
! Estimated noise=0.319455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164153 Jy
! Component: 100  -  total flux cleaned = 0.00216964 Jy
! Component: 150  -  total flux cleaned = 0.00226696 Jy
! Component: 200  -  total flux cleaned = 0.00244194 Jy
! Total flux subtracted in 200 components = 0.00244194 Jy
! Clean residual min=-0.003755 max=0.003174 Jy/beam
! Clean residual mean=0.000001 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 1.36024 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 125 components and 1.36024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022817Jy  sigma=0.594935
! Fit after  self-cal, rms=0.022514Jy  sigma=0.588107
wmodel /J1911-2006_X_map.mod
! wmodel: Unable to open new model file: /J1911-2006_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1911-2006_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.985 x 2.374 at 6.39 degrees (North through East)
! Clean map  min=-0.0035614  max=1.2146 Jy/beam
! Writing clean map to FITS file: .//J1911-2006_X_map.fits
wmodel .//J1911-2006_X_map.mod
! Writing 125 model components to file: .//J1911-2006_X_map.mod
wobs   .//J1911-2006_X_uvs.fits
! Writing UV FITS file: .//J1911-2006_X_uvs.fits
wwins  .//J1911-2006_X_map.win
! wwins: Wrote 6 windows to .//J1911-2006_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.21458 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000735991 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.181789 0.181789 0.363577 0.727155 1.45431 2.90862 5.81724 11.6345 23.269 46.5379 93.0758
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.214 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1650.27 
quit
! Quitting program
! Log file .//J1911-2006_X_dfm.log closed on Wed Nov 16 12:07:16 2016