! Started logfile: .//J1837+7507_X_dfm.log on Wed Nov 16 12:05:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1837+7507_X_uvm.fits
! Reading UV FITS file: .//J1837+7507_X_uvm.fits
! AN table 1: 139 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.797122 visibilities/baseline/integration-bin.
! Found source: J1837+7507
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 3 lines of history.
! 
! Reading 39888 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1837+7507_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019775Jy  sigma=29.247580
! Fit after  self-cal, rms=0.798931Jy  sigma=23.102182
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7516 mas, bmaj=1.266 mas, bpa=-18.11 degrees
! Estimated noise=0.232301 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150964 Jy
! Component: 100  -  total flux cleaned = 0.184847 Jy
! Total flux subtracted in 100 components = 0.184847 Jy
! Clean residual min=-0.005613 max=0.011998 Jy/beam
! Clean residual mean=0.000005 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.184847 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.184847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047036Jy  sigma=1.093652
! Fit after  self-cal, rms=0.047030Jy  sigma=1.093273
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129717 Jy
! Component: 100  -  total flux cleaned = 0.0190871 Jy
! Total flux subtracted in 100 components = 0.0190871 Jy
! Clean residual min=-0.004302 max=0.003561 Jy/beam
! Clean residual mean=0.000003 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.203934 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.203934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041845Jy  sigma=0.967024
! Fit after  self-cal, rms=0.041837Jy  sigma=0.966649
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.046 mas, bmaj=1.634 mas, bpa=-15.08 degrees
! Estimated noise=0.126857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487464 Jy
! Component: 100  -  total flux cleaned = 0.00715934 Jy
! Component: 150  -  total flux cleaned = 0.00808484 Jy
! Component: 200  -  total flux cleaned = 0.00870786 Jy
! Total flux subtracted in 200 components = 0.00870786 Jy
! Clean residual min=-0.003183 max=0.003278 Jy/beam
! Clean residual mean=0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.212642 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 34 components and 0.212642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040925Jy  sigma=0.950865
! Fit after  self-cal, rms=0.040888Jy  sigma=0.949575
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.046 x 1.634 at -15.08 degrees (North through East)
! Clean map  min=-0.003119  max=0.19797 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        0.97     KP        1.05     
!   LA        0.99     MK        1.01     NL        1.03     OV        0.98     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.95     KP        1.06     
!   LA        0.95     MK        1.00     NL        1.06     OV        0.97     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.95     KP        1.08     
!   LA        0.94     MK        1.03     NL        1.07     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.98     KP        1.03     
!   LA        0.97     MK        1.02     NL        1.04     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.00     KP        1.10     
!   LA        0.96     MK        1.00     NL        1.10     OV        0.95     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        1.11     
!   LA        0.98     MK        1.03     NL        1.07     OV        1.00     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.00     KP        1.12     
!   LA        0.96     MK        1.01     NL        1.01     OV        1.02     
!   PT        0.90     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        1.10     
!   LA        0.93     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.92     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.040888Jy  sigma=0.949575
! Fit after  self-cal, rms=0.038379Jy  sigma=0.873823
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.05 mas, bmaj=1.634 mas, bpa=-14.95 degrees
! Estimated noise=0.127038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188422 Jy
! Component: 100  -  total flux cleaned = 0.000253027 Jy
! Component: 150  -  total flux cleaned = 0.000359393 Jy
! Component: 200  -  total flux cleaned = 0.000311314 Jy
! Total flux subtracted in 200 components = 0.000311314 Jy
! Clean residual min=-0.002808 max=0.002733 Jy/beam
! Clean residual mean=-0.000017 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.212953 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 46 components and 0.212953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038185Jy  sigma=0.869732
! Fit after  self-cal, rms=0.038176Jy  sigma=0.869517
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038176Jy  sigma=0.869517
! Fit after  self-cal, rms=0.032516Jy  sigma=0.688270
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.05 mas, bmaj=1.636 mas, bpa=-15.16 degrees
! Estimated noise=0.126699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.26136e-05 Jy
! Component: 100  -  total flux cleaned = -8.48812e-05 Jy
! Component: 150  -  total flux cleaned = -0.000209137 Jy
! Component: 200  -  total flux cleaned = -0.000273239 Jy
! Total flux subtracted in 200 components = -0.000273239 Jy
! Clean residual min=-0.000602 max=0.000691 Jy/beam
! Clean residual mean=0.000001 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.21268 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.21268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032465Jy  sigma=0.686764
! Fit after  self-cal, rms=0.032470Jy  sigma=0.686652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000451392 Jy
! Component: 100  -  total flux cleaned = 0.000392124 Jy
! Component: 150  -  total flux cleaned = 0.00037388 Jy
! Component: 200  -  total flux cleaned = 0.00034004 Jy
! Total flux subtracted in 200 components = 0.00034004 Jy
! Clean residual min=-0.000582 max=0.000579 Jy/beam
! Clean residual mean=0.000000 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.21302 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 72 components and 0.21302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032441Jy  sigma=0.685867
! Fit after  self-cal, rms=0.032439Jy  sigma=0.685829
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032439Jy  sigma=0.685829
! Fit after  self-cal, rms=0.032368Jy  sigma=0.685141
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=1.637 mas, bpa=-15.29 degrees
! Estimated noise=0.126705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264904 Jy
! Component: 100  -  total flux cleaned = 0.000305264 Jy
! Component: 150  -  total flux cleaned = 0.000236533 Jy
! Component: 200  -  total flux cleaned = 0.000221159 Jy
! Total flux subtracted in 200 components = 0.000221159 Jy
! Clean residual min=-0.000561 max=0.000550 Jy/beam
! Clean residual mean=0.000001 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.213241 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.213241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032343Jy  sigma=0.684492
! Fit after  self-cal, rms=0.032342Jy  sigma=0.684479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.64891e-05 Jy
! Component: 100  -  total flux cleaned = -1.60439e-05 Jy
! Component: 150  -  total flux cleaned = -1.54865e-05 Jy
! Component: 200  -  total flux cleaned = -2.18133e-06 Jy
! Total flux subtracted in 200 components = -2.18133e-06 Jy
! Clean residual min=-0.000558 max=0.000542 Jy/beam
! Clean residual mean=0.000001 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.213239 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 86 components and 0.213239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032330Jy  sigma=0.684135
! Fit after  self-cal, rms=0.032330Jy  sigma=0.684129
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032330Jy  sigma=0.684129
! Fit after  self-cal, rms=0.032309Jy  sigma=0.683956
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.301 mas, bmaj=2.767 mas, bpa=-17.03 degrees
! Estimated noise=0.157138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139849 Jy
! Component: 100  -  total flux cleaned = 0.000216534 Jy
! Component: 150  -  total flux cleaned = 0.000224674 Jy
! Component: 200  -  total flux cleaned = 0.000224711 Jy
! Total flux subtracted in 200 components = 0.000224711 Jy
! Clean residual min=-0.000626 max=0.000556 Jy/beam
! Clean residual mean=0.000001 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.213463 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.213463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032302Jy  sigma=0.683786
! Fit after  self-cal, rms=0.032302Jy  sigma=0.683781
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.48799e-05 Jy
! Component: 100  -  total flux cleaned = 1.80767e-05 Jy
! Component: 150  -  total flux cleaned = 1.81131e-05 Jy
! Component: 200  -  total flux cleaned = 2.43489e-05 Jy
! Total flux subtracted in 200 components = 2.43489e-05 Jy
! Clean residual min=-0.000624 max=0.000546 Jy/beam
! Clean residual mean=0.000001 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.213488 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 105 components and 0.213488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032298Jy  sigma=0.683684
! Fit after  self-cal, rms=0.032298Jy  sigma=0.683683
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=1.638 mas, bpa=-15.42 degrees
! Estimated noise=0.126746 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.048 x 1.638 at -15.42 degrees (North through East)
! Clean map  min=-0.000579  max=0.19757 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7533 mas, bmaj=1.27 mas, bpa=-18.2 degrees
! Estimated noise=0.230764 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150504 Jy
! Component: 100  -  total flux cleaned = 0.18417 Jy
! Component: 150  -  total flux cleaned = 0.196257 Jy
! Component: 200  -  total flux cleaned = 0.202562 Jy
! Total flux subtracted in 200 components = 0.202562 Jy
! Clean residual min=-0.001967 max=0.003039 Jy/beam
! Clean residual mean=0.000002 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.202562 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.202562 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=1.638 mas, bpa=-15.42 degrees
! Estimated noise=0.126746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479551 Jy
! Component: 100  -  total flux cleaned = 0.00717934 Jy
! Component: 150  -  total flux cleaned = 0.00863031 Jy
! Component: 200  -  total flux cleaned = 0.00933684 Jy
! Total flux subtracted in 200 components = 0.00933684 Jy
! Clean residual min=-0.000710 max=0.000767 Jy/beam
! Clean residual mean=0.000002 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.211899 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 32 components and 0.211899 Jy
! Inverting map 
! Added new window around map position (0.6, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397269 Jy
! Component: 100  -  total flux cleaned = 0.000627878 Jy
! Component: 150  -  total flux cleaned = 0.000777726 Jy
! Component: 200  -  total flux cleaned = 0.000888578 Jy
! Total flux subtracted in 200 components = 0.000888578 Jy
! Clean residual min=-0.000572 max=0.000613 Jy/beam
! Clean residual mean=0.000001 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.212787 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 44 components and 0.212787 Jy
! Inverting map 
! Added new window around map position (-5.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032413 Jy
! Component: 100  -  total flux cleaned = 0.000363427 Jy
! Component: 150  -  total flux cleaned = 0.000401052 Jy
! Component: 200  -  total flux cleaned = 0.000452896 Jy
! Total flux subtracted in 200 components = 0.000452896 Jy
! Clean residual min=-0.000516 max=0.000500 Jy/beam
! Clean residual mean=0.000001 rms=0.000119 Jy/beam
! Combined flux in latest and established models = 0.21324 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 0.21324 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.301 mas, bmaj=2.767 mas, bpa=-17.03 degrees
! Estimated noise=0.157138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211068 Jy
! Component: 100  -  total flux cleaned = 0.000223084 Jy
! Component: 150  -  total flux cleaned = 0.000223225 Jy
! Component: 200  -  total flux cleaned = 0.000223595 Jy
! Total flux subtracted in 200 components = 0.000223595 Jy
! Clean residual min=-0.000568 max=0.000528 Jy/beam
! Clean residual mean=0.000001 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.213464 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.32297e-06 Jy
! Component: 100  -  total flux cleaned = 8.05326e-06 Jy
! Component: 150  -  total flux cleaned = 7.53993e-07 Jy
! Component: 200  -  total flux cleaned = 7.94147e-06 Jy
! Total flux subtracted in 200 components = 7.94147e-06 Jy
! Clean residual min=-0.000563 max=0.000523 Jy/beam
! Clean residual mean=0.000002 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.213472 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 89 components and 0.213472 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=1.638 mas, bpa=-15.42 degrees
! Estimated noise=0.126746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.06813e-05 Jy
! Component: 100  -  total flux cleaned = -5.59368e-05 Jy
! Component: 150  -  total flux cleaned = -8.34542e-05 Jy
! Component: 200  -  total flux cleaned = -9.6508e-05 Jy
! Total flux subtracted in 200 components = -9.6508e-05 Jy
! Clean residual min=-0.000518 max=0.000508 Jy/beam
! Clean residual mean=0.000001 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.213375 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 98 components and 0.213375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032289Jy  sigma=0.683443
! Fit after  self-cal, rms=0.032285Jy  sigma=0.683353
wmodel /J1837+7507_X_map.mod
! wmodel: Unable to open new model file: /J1837+7507_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1837+7507_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.048 x 1.638 at -15.42 degrees (North through East)
! Clean map  min=-0.0004762  max=0.19763 Jy/beam
! Writing clean map to FITS file: .//J1837+7507_X_map.fits
wmodel .//J1837+7507_X_map.mod
! Writing 98 model components to file: .//J1837+7507_X_map.mod
wobs   .//J1837+7507_X_uvs.fits
! Writing UV FITS file: .//J1837+7507_X_uvs.fits
wwins  .//J1837+7507_X_map.win
! wwins: Wrote 5 windows to .//J1837+7507_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.197631 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000114098 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.173198 0.173198 0.346397 0.692793 1.38559 2.77117 5.54235 11.0847 22.1694 44.3388 88.6776
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.197 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1732.12 
quit
! Quitting program
! Log file .//J1837+7507_X_dfm.log closed on Wed Nov 16 12:05:54 2016